Stability of Boron Nitride Nanosphere Dispersions in the Presence of Polyelectrolytes

Boron nitride nanospheres (BNNSs) were functionalized with polyelectrolytes. The effect of the polyelectrolyte dose and ionic strength on the charging and aggregation properties was investigated. At appropriate polyelectrolyte doses, charge neutralization occurred, whereas by increasing the dose, charge reversal was observed. The complete coating of the particles was indicated by a plateau in the ζ-potential values, which do not change significantly beyond the dose corresponding to the onset of such a plateau. The dispersions were highly aggregated around the charge neutralization point, while at lower or higher doses, the particles were stable. The salt-induced aggregation experiments revealed that the polyelectrolyte coatings contribute to the colloidal stability of the particles, namely, the critical coagulation concentrations deviated from the one determined for bare BNNSs. The presence of electrostatic and steric interparticle forces induced by the adsorbed polyelectrolyte chains was assumed. The obtained results confirm that the comprehensive investigation of the colloidal stability of BNNS particles is crucial to design stable or unstable dispersions and that polyelectrolytes are suitable agents for both stabilization and destabilization of BNNS dispersions, depending on the purpose of their application.

Serine-Lysine Peptides as Mediators for the Production of Titanium Dioxide: Investigating the Effects of Primary and Secondary Structures Using Solid-State NMR Spectroscopy and DFT Calculations

A biomimetic approach to the formation of titania (TiO₂) nanostructures is desirable because of the mild conditions required in this form of production. We have identified a series of serine-lysine peptides as candidates for the biomimetic production of TiO₂ nanostructures. We have assayed these peptides for TiO₂-precipitating activity upon exposure to titanium bis(ammonium lactato)dihydroxide and have characterized the resulting coprecipitates using scanning electron microscopy. A subset of these assayed peptides efficiently facilitates the production of TiO₂ nanospheres. Here, we investigate the process of TiO₂ nanosphere formation mediated by the S-K peptides KSSKK- and SKSK₃SKS using one-dimensional and two-dimensional solid-state NMR (ssNMR) on peptide samples with uniformly ¹³C-enriched residues. ssNMR is used to assign ¹³C chemical shifts (CSs) site-specifically in each free peptide and TiO₂-embedded peptide, which are used to derive secondary structures in the neat and TiO₂ coprecipitated states. The backbone ¹³C CSs are used to assess secondary structural changes undergone during the coprecipitation process. Side-chain ¹³C CS changes are analyzed with density functional theory calculations and used to determine side-chain conformational changes that occur upon coprecipitation with TiO₂ and to determine surface orientation of lysine side chains in TiO₂-peptide composites.

Understanding the Effects of Nanocapsular Mechanical Property on Passive and Active Tumor Targeting

The physicochemical properties of nanoparticles (size, charge, and surface chemistry, etc.) influence their biological functions often in complex and poorly understood ways. This complexity is compounded when the nanostructures involved have variable mechanical properties. Here, we report the synthesis of liquid-filled silica nanocapsules (SNCs, ∼ 150 nm) having a wide range of stiffness (with Young's moduli ranging from 704 kPa to 9.7 GPa). We demonstrate a complex trade-off between nanoparticle stiffness and the efficiencies of both immune evasion and passive/active tumor targeting. Soft SNCs showed 3 times less uptake by macrophages than stiff SNCs, while the uptake of PEGylated SNCs by cancer cells was independent of stiffness. In addition, the functionalization of stiff SNCs with folic acid significantly enhanced their receptor-mediated cellular uptake, whereas little improvement for the soft SNCs was conferred. Further in vivo experiments confirmed these findings and demonstrated the critical role of nanoparticle mechanical properties in regulating their interactions with biological systems.

Secondary structure and dynamics study of the intrinsically disordered silica-mineralizing peptide P5 S3 during silicic acid condensation and silica decondensation

The silica forming repeat R5 of sil1 from Cylindrotheca fusiformis was the blueprint for the design of P5 S3 , a 50-residue peptide which can be produced in large amounts by recombinant bacterial expression. It contains 5 protein kinase A target sites and is highly cationic due to 10 lysine and 10 arginine residues. In the presence of supersaturated orthosilicic acid P5 S3 enhances silica-formation whereas it retards the dissolution of amorphous silica (SiO2 ) at globally undersaturated concentrations. The secondary structure of P5 S3 during these 2 processes was studied by circular dichroism (CD) spectroscopy, complemented by nuclear magnetic resonance (NMR) spectroscopy of the peptide in the absence of silicate. The NMR studies of dual-labeled (13 C, 15 N) P5 S3 revealed a disordered structure at pH 2.8 and 4.5. Within the pH range of 4.5-9.5 in the absence of silicic acid, the CD data showed a disordered structure with the suggestion of some polyproline II character. Upon silicic acid polymerization and during dissolution of preformed silica, the CD spectrum of P5 S3 indicated partial transition into an α-helical conformation which was transient during silica-dissolution. The secondary structural changes observed for P5 S3 correlate with the presence of oligomeric/polymeric silicic acid, presumably due to P5 S3 -silica interactions. These P5 S3 -silica interactions appear, at least in part, ionic in nature since negatively charged dodecylsulfate caused similar perturbations to the P5 S3 CD spectrum as observed with silica, while uncharged ß-d-dodecyl maltoside did not affect the CD spectrum of P5 S3 . Thus, with an associated increase in α-helical character, P5 S3 influences both the condensation of silicic acid into silica and its decondensation back to silicic acid.

Autocatalytic synthesis of multifunctional precursors for fabricating silica microspheres with well-dispersed Ag and Co3O4 nanoparticles

Herein, an autocatalytic route to fabricate dual metal ion-equipped organic/inorganic hybrid silica, an ideal precursor for multifunctional silica-based composites integrated with well-dispersed Ag and Co₃O₄ nanoparticles was demonstrated. Significantly, by rational selection of reactants, such dual metal ion-equipped organic/inorganic hybrid silica can be synthesized through successive spontaneous reactions under near neutral conditions without an additional catalyst. Both the Ag⁺ and Co²⁺ ions are introduced into silica by chemical bonds, which favor the formation of small-sized and well-dispersed Ag and Co₃O₄ nanoparticles without aggregation in the entire silica matrix. After calcination, multifunctional silica composites equipped with well-dispersed Ag and Co₃O₄ nanoparticles were obtained. The as-obtained silica composites, as indicated by scanning electron microscopy (SEM) and transmission electron microscopy (TEM), have a spherical morphology and smooth surface. TEM tests also reveal the well dispersed fashion of Ag and Co₃O₄ nanoparticles. In addition, the obtained Ag-Co₃O₄@SiO₂ composites exhibit good catalytic performance in the reduction of methylene blue (MB) with NaBH₄ as a reducing agent, and can be readily recycled by an external magnetic field due to their superparamagnetic properties.

Bioinspired Oil Core/Silica Shell Nanocarriers with Tunable and Multimodal Functionalities

The application of multimodal systems in the field of nanomedicine is advantageous as they can perform two or more tasks simultaneously. Here a robust approach is presented mimicking biogenic silica to design a multilayered nanocarrier system with a central oil core encapsulated within a polymer-silica shell. The outermost silica shell has been deposited through a biosilicification process induced by poly-L-lysine molecules immobilized on the surface of emulsion droplets. This system can be simultaneously loaded with high amount of hydrophobic molecules or contrasting agents in the inner oil core, while the polymeric-silica layers can be easily tagged with at least two different contrasting agents. Additionally, the zwitterionic nature of the silica precipitating peptide (poly-L-lysine) has been efficiently exploited to modulate and entirely reverse the surface charge of the nanocarrier without using any additional coating material. It has been demonstrated experimentally that the designed nanocapsular system is monodisperse, nontoxic, cargo protective, tunable in thickness, fluorescent, and magnetic resonance imaging (MRI) active so highly versatile for multiple applications in the field of drug delivery and in vivo imaging.

Poly(L-lysine) Interfaces via Dual Click Reactions on Surface-Bound Custom-Designed Dithiol Adsorbates

Surfaces modified with poly(L-lysine) can be used to immobilize selected biomolecules electrostatically. This report describes the preparation of a set of self-assembled monolayers (SAMs) from three different azide-terminated adsorbates as platforms for performing controlled surface attachments and as a means of determining the parameters that afford stable poly(L-lysine)-modified SAM surfaces having controlled packing densities. A maleimide-terminated alkyne linker was "clicked" to the azide-terminated surfaces via a copper-catalyzed cycloaddition reaction to produce the attachment sites for the polypeptides. A thiol-Michael addition was then used to immobilize cysteine-terminated poly(L-lysine) moieties on the gold surface, avoiding adsorbate self-reactions with this two-step procedure. Each step in this process was analyzed by ellipsometry, X-ray photoelectron spectroscopy, polarization modulation infrared reflection-absorption spectroscopy, and contact angle goniometry to determine which adsorbate structure most effectively produced the targeted polypeptide interface. Additionally, a series of mixed SAMs using an azidoalkanethiol in combination with a normal alkanethiol having an equivalent alkyl chain were prepared to provide data to determine how dilution of the azide reactive site on the SAM surface influences the initial click reaction. Overall, the collected data demonstrate the advantages of an appropriately designed bidentate absorbate and its potential to form effective platforms for biomolecule surface attachment via click reactions.