Synthesis and crystal structure of 1,3-bis-(acet-oxymeth-yl)-5-{[(4,6-di-methyl-pyridin-2-yl)amino]-methyl}-2,4,6-tri-ethyl-benzene

In the crystal structure of the title compound, C26H36N2O4, the tripodal mol-ecule exists in a conformation in which the substituents attached to the central arene ring are arranged in an alternating order above and below the ring plane. The heterocyclic unit is inclined at an angle of 79.6 (1)° with respect to the plane of the benzene ring. In the crystal, the mol-ecules are connected via N-H⋯O bonds, forming infinite supra-molecular strands. Inter-strand association involves weak C-H⋯O and C-H⋯π inter-actions, with the pyridine ring acting as an acceptor in the latter case.

Fluorophore-Probed Curdlan Polysaccharide Chemosensor: "Turn-On" Oligosaccharide Sensing in Aqueous Media

The ability to sense saccharides in aqueous media has attracted much attention in multidisciplinary sciences because the detection of ultrahigh concentrations of sugar chains associated with serious diseases could lead to further health promotion. However, there are notable challenges. In this study, a rhodamine-modified Curdlan (Rhod-Cur) chemosensor was synthesized that exhibited distinctive fluorescence "turn-on" responses. Rhod-Cur exhibited simultaneous sensitive and selective sensing of clinically useful acarbose with a good limit of detection (5 μM) from among those of the saccharides examined. The (chir)optical properties of Rhod-Cur were elucidated using UV/vis, fluorescence, excitation, and circular dichroism spectroscopies; lifetime measurements and morphological studies using atomic force and confocal laser scanning microscopy and dynamic light scattering techniques revealed that the fluorescence "turn-on" behavior originates from globule-to-coaggregation conversion upon insertion of the oligosaccharides in the dynamic Cur backbone.

Crystal structure and Hirshfeld surface analysis of 4,4'-di-meth-oxy-biphenyl-3,3',5,5'-tetra-carb-oxy-lic acid dihydrate

In the crystal of the title compound, C18H14O10·2H2O, the arene rings of the biphenyl moiety are tilted at an angle of 24.3 (1)°, while the planes passing through the carboxyl groups are rotated at angles of 8.6 (1) and 7.7 (1)° out of the plane of the benzene ring to which they are attached. The crystal structure is essentially stabilized by O-H⋯O bonds. Here, the carboxyl groups of neighbouring host mol-ecules are connected by cyclic R 2 2(8) synthons, leading to the formation of a three-dimensional network. The water mol-ecules in turn form helical supra-molecular strands running in the direction of the crystallographic c-axis (chain-like water clusters). The second H atom of each water mol-ecule provides a link to a meth-oxy O atom of the host mol-ecule. A Hirshfeld surface analysis was performed to qu-antify the contributions of the different inter-molecular inter-actions, indicating that the most important contributions to the crystal packing are from H⋯O/O⋯H (37.0%), H⋯H (26.3%), H⋯C/C⋯H (18.5%) and C⋯O/O⋯C (9.5%) inter-actions.

Supramolecular Motifs in the Crystal Structures of Triethylbenzene Derivatives Bearing Pyridinium Subunits in Combination with Pyrimidinyl or Pyridinyl Groups

A series of mono- and dicationic 1,3,5-trisubstituted 2,4,6-triethylbenzenes containing pyridinium groups in combination with aminopyrimidine-/aminopyridine-based recognition units were synthesized and crystallographically studied. The combination of neutral and ionic building blocks represents a promising strategy for the development of effective and selective artificial receptors for anionic substrates. In the crystalline state, the investigated compounds show a tendency to bind the counterion PF6- in the cavity formed by the three functionalized side-arms. The intermolecular interactions with the PF6- ion comprise N-H∙∙∙F and C-H∙∙∙F bonds. Detailed analysis of various supramolecular motifs, including interactions with solvent molecules, provides deeper insights into the processes of molecular recognition. The information obtained is useful in the development of new receptor molecules for anions and in the selection of the most appropriate counterion.

Compounds Derived from 9,9-Dialkylfluorenes: Syntheses, Crystal Structures and Initial Binding Studies (Part II)

New representatives of 2,4,7-trisubstituted 9,9-dialkyl-9H-fluorenes were prepared and used for crystallographic investigations as well as initial binding studies towards metal ions and carbohydrates. The binding studies, which included ¹ H NMR spectroscopic titrations and fluorescence measurements, demonstrated the ability of the tested fluorene-based compounds to act as complexing agents for ionic and neutral substrates. Depending on the nature of the subunits of the fluorene derivatives, "turn on" or "turn off" fluorescent chemosensors can be developed. Compounds composed of 4,6-dimethylpyridin-2-yl-aminomethyl moieties have the potential to be used as sensitive "turn-on" chemosensors for some metal ions.

Sensitive and specific detection of saccharide species based on fluorescence: update from 2016

Increasing evidence supports the critical role of saccharides in various pathophysiological steps of tumor progression, where they regulate tumor proliferation, invasion, hematogenic metastasis, and angiogenesis. The identification and recognition of these saccharides provide a solid foundation for the development of targeted drug preparations, which are however not fully understood due to their complex and similar structures. In order to achieve fluorescence sensing of saccharides, extensive research has been conducted to design molecular probes and nanoparticles made of different materials. This paper aims to provide in-depth discussion of three main topics that cover the current status of the carbohydrate sensing based on the fluorescence sensing mechanism, including a phenylboronic acid-based sensing platform, non-boronic acid entities, as well as an enzyme-based sensing platform. It also highlights efforts made to understand the recognition mechanisms and improve the sensing properties of these systems. Finally, we present the challenge of achieving high selectivity and sensitivity recognition of saccharides, and suggest possible future avenues for exploration.

Emergence of Cooperative Glucose-Binding Networks in Adaptive Peptide Systems

Minimalistic peptide-based systems that bind sugars in water are challenging to design due to the weakness of interactions and required cooperative contributions from specific amino-acid side chains. Here, we used a bottom-up approach to create peptide-based adaptive glucose-binding networks by mixing glucose with selected sets of input dipeptides (up to 4) in the presence of an amidase to enable in situ reversible peptide elongation, forming mixtures of up to 16 dynamically interacting tetrapeptides. The choice of input dipeptides was based on amino-acid abundance in glucose-binding sites found in the protein data bank, with side chains that can support hydrogen bonding and CH-π interactions. Tetrapeptide sequence amplification patterns, determined through LC-MS analysis, served as a readout for collective interactions and led to the identification of optimized binding networks. Systematic variation of dipeptide input revealed the emergence of two networks of non-covalent hydrogen bonding and CH-π interactions that can co-exist, are cooperative and context-dependent. A cooperative binding mode was determined by studying the binding of the most amplified tetrapeptide (AWAD) with glucose in isolation. Overall, these results demonstrate that the bottom-up design of complex systems can recreate emergent behaviors driven by covalent and non-covalent self-organization that are not observed in reductionist designs and lead to the identification of system-level cooperative binding motifs.

Analysing binding stoichiometries in NMR titration experiments using Monte Carlo simulation and resampling techniques

The application of Monte Carlo simulation and resampling techniques to analyse possible binding stoichiometries in NMR titration experiments is presented. Four simulated NMR titration experiments having complex species with 1:1, 2:1 and 1:2 stoichiometries were each analysed using a 1:1, 2:1/1:1, 1:1/1:2 and a 2:1/1:1/1:2 model as implemented in SupraFit. Each best-fit model was inspected using Monte Carlo simulation (MC), Cross Validation (CV) and a new protocol termed Reduction Analysis (RA). The results of the statistical post-processes were used to calculate characteristic descriptors that are the base of the judgment for both, the models and individual stability constants. The results indicate promising approaches to correctly identify 1:1, 2:1/1:1 and 1:1/1:2 models, however with some limitations in case of the 2:1/1:1/1:2 model. All simulations and post-processing protocols were performed with the newly presented SupraFit.

Cycloalkyl Groups as Building Blocks of Artificial Carbohydrate Receptors: Studies with Macrocycles Bearing Flexible Side-Arms

The cyclopentyl group was expected to act as a building block for artificial carbohydrate receptors and to participate in van der Waals contacts with the carbohydrate substrate in a similar way as observed for the pyrrolidine ring of proline in the crystal structures of protein-carbohydrate complexes. Systematic binding studies with a series of 1,3,5-trisubstituted 2,4,6-triethylbenzenes bearing various cycloalkyl groups as recognition units provided indications of the involvement of these groups in the complexation process and showed the influence of the ring size on the receptor efficiency. Representatives of compounds that exhibit a macrocyclic backbone and flexible side arms were now chosen as further model systems to investigate whether the previously observed effects represent a general trend. Binding studies with these macrocycles towards β-D-glucopyranoside, an all-equatorial substituted carbohydrate substrate, included 1H NMR spectroscopic titrations and microcalorimetric investigations. The performed studies confirmed the previously observed tendency and showed that the compound bearing cyclohexyl groups displays the best binding properties.

Chiral Assemblies of Planar and Achiral meta-Arylene Ethynylene Macrocycles Induced by Saccharide Recognition

We created chiral assemblies of planar and achiral macrocycles by saccharide recognition. To achieve this, we synthesized stackable meta-arylene ethynylene macrocycles consisting of pyridine-acetylene-phenol and pyridine-acetylene-aniline units. ¹H NMR, absorption, and fluorescence emission spectroscopy indicated that these macrocycles formed 1:1 and 2:1 complexes with lipophilic alkyl glycosides. The 2:1 complex of the pyridine-acetylene-phenol macrocycle showed induced circular dichroism (ICD) bands, meaning that two achiral macrocycles are arranged in an asymmetrically twisted manner. CD spectroscopy revealed that the helical sense was affected by the chirality of guest saccharides. On the other hand, strong CD bands were observed after solid-liquid extraction of native saccharides into lipophilic solvents using the pyridine-acetylene-aniline macrocycle.

Synthesis and crystal structure of 1,3-bis-{[N,N-bis-(2-hy-droxy-eth-yl)amino]-meth-yl}-5-{[(4,6-di-methyl-pyridin-2-yl)amino]-meth-yl}-2,4,6-tri-ethyl-benzene

In the crystal structure of the title compound, C30H50N4O4, the two bis-(hy-droxy-eth-yl)amino moieties and the 2,4-di-methyl-pyridinyl-amino unit of the mol-ecule are located on one side of the central benzene ring, while the ethyl substituents are oriented in the opposite direction. The dihedral angle between the planes of the aromatic rings is 73.6 (1)°. The conformation of the mol-ecule is stabilized by intra-molecular O-H⋯O (1.86-2.12 Å) and C-H⋯N (2.40, 2.54 Å) hydrogen bonds. Dimers of inversion-related mol-ecules represent the basic supra-molecular entities of the crystal structure. They are further connected via O-H⋯O hydrogen bonding into undulating layers extending parallel to the crystallographic bc plane. Inter-layer inter-action is accomplished by weak C-H⋯π contacts.

Regiochemical Effects on the Carbohydrate Binding and Selectivity of Flexible Synthetic Carbohydrate Receptors with Indole and Quinoline Heterocyclic Groups

Synthetic carbohydrate receptors (SCRs) that bind cell-surface carbohydrates could be used for disease detection, drug-delivery, and therapeutics, or for the site-selective modification of complex carbohydrates but their potential has not been realized because of remaining challenges associated with binding affinity and substrate selectivity. We have reported recently a series of flexible SCRs based upon a biaryl core with four pendant heterocyclic groups that bind glycans selectively through noncovalent interactions. Here we continue to explore the role of heterocycles on substrate selectivity by expanding our library to include a series of indole and quinoline heterocycles that vary in their regiochemistry of attachment to the biaryl core. The binding of these SCRs to a series of biologically-relevant carbohydrates was studied by 1H NMR titrations in CD2Cl2 and density-functional theory calculations. We find SCR030, SCR034 and SCR037 are selective, SCR031, SCR032, and SCR039 are strong binders, and SCR033, SCR035, SCR036, and SCR038 are promiscuous and bind weakly. Computational analysis reveals the importance of C-H⋯π and H-bonding interactions in defining the binding properties of these new receptors. By combining these data with those obtained from our previous studies on this class of flexible SCRs, we develop a series of design rules that account for the binding of all SCRs of this class and anticipate the binding of future, not-yet imagined tetrapodal SCRs.

PCage: Fluorescent Molecular Temples for Binding Sugars in Water

The development of synthetic receptors that recognize carbohydrates in water with high selectivity and specificity is challenging on account of their structural complexity and strong hydrophilicity. Here, we report on the design and synthesis of two pyrene-based, temple-shaped receptors for the recognition of a range of common sugars in water. These receptors rely on the use of two parallel pyrene panels, which serve as roofs and floors, capable of forming multiple [C-H···π] interactions with the axially oriented C-H bonds on glycopyranosyl rings in the carbohydrate-based substrates. In addition, eight polarized pyridinium C-H bonds, projecting from the roofs and floors of the temple receptors toward the binding cavities, form [C-H···O] hydrogen bonds, with the equatorially oriented OH groups on the sugars located inside the hydrophobic cavities. Four para-xylylene pillars play a crucial role in controlling the distance between the roof and floor. These temple receptors are highly selective for the binding of glucose and its derivatives. Furthermore, they show enhanced fluorescence upon binding with glucose in water, a property which is useful for glucose-sensing in aqueous solution.

Crystal structures of 2-[3,5-bis-(bromo-meth-yl)-2,4,6-tri-ethyl-benz-yl]isoindoline-1,3-dione and 2-{5-(bromo-meth-yl)-3-[(1,3-dioxoisoindolin-2-yl)meth-yl]-2,4,6-tri-ethyl-benz-yl}isoindoline-1,3-dione

The title compounds, C23H25Br2NO2 (1) and C31H29BrN2O4 (2), crystallize in the space group P21/n with two (1-A and 1-B) and one mol-ecules, respectively, in the asymmetric unit of the cell. The mol-ecular conformation of these compounds is stabilized by intra-molecular C-H⋯O hydrogen bonds and C-H⋯N or C-H⋯π inter-actions. The crystal structure of 1 features a relatively strong Br⋯O=C halogen bond, which is not observed in the case of 2. Both crystal structures are characterized by the presence of C-H⋯Br hydrogen bonds and numerous inter-molecular C-H⋯O hydrogen-bonding inter-actions.

Turn-On Fluorescent Probe Based on a Dansyl Triarginine Peptide for Ganglioside Imaging

Gangliosides play pivotal biological roles in the animal cell membranes, and it is vital to develop fluorescent probes for imaging them. To date, various artificial receptors for ganglioside imaging have been developed; however, turn-on fluorescence imaging for gangliosides with high contrast has not been achieved. We developed a simple fluorescent probe on the basis of a dansyl triarginine peptide for turn-on ganglioside imaging on the liposome membrane. The probe bound to monosialyl gangliosides and other anionic lipids with association constants was 10⁵ M^-1, which enhanced from 6-fold to 7-fold the fluorescence intensity. Upon binding to monosialyl ganglioside-containing giant liposomes, the turn-on probe selectively enhanced the fluorescence intensity compared with the other anionic lipids. This simple peptide probe for turn-on fluorescence imaging of gangliosides would provide a novel molecular tool for chemical biology.

Molecular Recognition of Disaccharides in Water: Preorganized Macrocyclic or Adaptive Acyclic?

When facing the dilemma of following a preorganized or adaptive design approach in conceiving the architecture of new biomimetic receptors for carbohydrates, shape-persistent macrocyclic structures were most often chosen to achieve effective recognition of neutral saccharides in water. In contrast, acyclic architectures have seldom been explored, even though potentially simpler and more easily accessible. In this work, comparison of the binding properties of two structurally related diaminocarbazolic receptors, featuring a macrocyclic and an acyclic tweezer-shaped architecture, highlighted the advantages provided by the acyclic receptor in terms of selectivity in the recognition of 1,4-disaccharides of biological interest. Selective recognition of GlcNAc2 , the core fragment of N-glycans exposed on the surface of enveloped viruses, stands as an emblematic example. NMR spectroscopic data and molecular modeling calculations were used to ascertain the differences in binding mode and to shed light on the origin of recognition efficacy and selectivity.

Binding modes of methyl α-d-glucopyranoside to an artificial receptor in crystalline complexes

Compared to the numerous X-ray crystal structures of protein-carbohydrate complexes, the successful elucidation of the crystal structures of complexes between artificial receptors and carbohydrates has been very rarely reported in the literature. In this work, we describe the binding modes of two complexes formed between methyl α-d-glucopyranoside and an artificial receptor belonging to the class of compounds consisting of a 1,3,5-trisubstituted 2,4,6-trialkylbenzene scaffold. It is particularly noteworthy that these two complexes are present in one crystal structure, as was observed by us for the first time in the case of the recently reported three crystal structures of the complexes with methyl β-d-glucopyranoside, each containing two different receptor-carbohydrate complexes. The noncovalent interactions stabilizing the new complexes are compared with those observed in the aforementioned crystalline complexes with methyl β-d-glucopyranoside.

A Simple Biomimetic Receptor Selectively Recognizing the GlcNAc2 Disaccharide in Water

GlcNAc₂ is the core disaccharide fragment present in N-glycans exposed on the surface of enveloped viruses of high health concern, such as coronaviruses. Because N-glycans are directly involved in the docking of viruses to host cells, recognition of GlcNAc₂ by a biomimetic receptor may be a convenient alternative to the use of lectins to interfere with viral entry and infection. Herein, we describe a simple biomimetic receptor recognizing the methyl-β-glycoside of GlcNAc₂ in water with an unprecedented affinity of 160 μM, exceeding that of more structurally complex receptors reported in the literature. The tweezers-shaped acyclic structure exhibits marked selectivity among structurally related disaccharides, and complete discrimination between mono- and disaccharides. Molecular modelling calculations supported by NOE data provided a three-dimensional description of the binding mode, shedding light on the origin of the affinities and selectivities exhibited by the receptor.

Syntheses of Acyclic and Macrocyclic Compounds Derived from 9,9-Diethylfluorene (Part I)

A series of new 9,9-diethylfluorenes consisting of three side-arms each bearing a heterocyclic, bis(carboxymethyl)amino, bis(carbamoylmethyl)amino, bis(ethoxycarbonylmethyl)amino or an amino group were prepared on the basis of 2,4,7-tris(bromomethyl)-9,9-diethylfluorene. Imidazolyl, benzimidazolyl, pyrazolyl, pyrrolyl, 1,3-dioxoisoindolyl and pyridinium groups were taken into account as heterocyclic units, attached to the aromatic skeleton via -CH2-, -CH2NHCH2- or -CH2N=CH- linkers. In addition to the seventeen 2,4,7-trisubstituted 9,9-diethylfluorenes, two macrocyclic compounds were prepared on the basis of 2,7-bis(aminomethyl)-9,9-diethylfluorene. The excellent yield of the macrocyclization reaction is worth a special mention. Both the acyclic and the macrocyclic fluorene-based compounds have, among other things, the potential to act as artificial receptors for different substrates in analogy to the known receptors consisting of a benzene or biphenyl core.

A Pyridine-Acetylene-Aniline Oligomer: Saccharide Recognition and Influence of this Recognition Array on the Activity as Acylation Catalyst

In order to create new functions of foldamer-type hosts, various kinds of recognition arrays are expected to be developed. Here, a pyridine-acetylene-aniline unit is presented as a new class of a saccharide recognition array. The conformational stabilities of this array were analyzed by DFT calculation, and suggested that a pyridine-acetylene-aniline oligomer tends to form a helical structure. An oligomer of this array was synthesized, and its association for octyl β-D-glucopyranoside was confirmed by ¹ H NMR measurements. UV/Vis, circular dichroism, and fluorescence titration experiments revealed its high affinity for octyl glycosides in apolar solvents (K_a =10⁴ to 10⁵  M^-1 ). This oligomer was relatively stable under basic conditions, and therefore this array was expected to be applied to the derivatization of saccharides. A 4-(dialkylamino)pyridine attached pyridine-acetylene-aniline oligomer proved to catalyze the acylation of the octyl glucoside.

Flexible Synthetic Carbohydrate Receptors as Inhibitors of Viral Attachment

Carbohydrate-receptor interactions are often involved in the docking of viruses to host cells, and this docking is a necessary step in the virus life cycle that precedes infection and, ultimately, replication. Despite the conserved structures of the glycans involved in docking, they are still considered "undruggable", meaning these glycans are beyond the scope of conventional pharmacological strategies. Recent advances in the development of synthetic carbohydrate receptors (SCRs), small molecules that bind carbohydrates, could bring carbohydrate-receptor interactions within the purview of druggable targets. Here we discuss the role of carbohydrate-receptor interactions in viral infection, the evolution of SCRs, and recent results demonstrating their ability to prevent viral infections in vitro. Common SCR design strategies based on boronic ester formation, metal chelation, and noncovalent interactions are discussed. The benefits of incorporating the idiosyncrasies of natural glycan-binding proteins-including flexibility, cooperativity, and multivalency-into SCR design to achieve nonglucosidic specificity are shown. These studies into SCR design and binding could lead to new strategies for mitigating the grave threat to human health posed by enveloped viruses, which are heavily glycosylated viroids that are the cause of some of the most pressing and untreatable diseases, including HIV, Dengue, Zika, influenza, and SARS-CoV-2.

Crystal structures of monohydrate and methanol solvate compounds of {1-[(3,5-bis{[(4,6-dimethylpyridin-2-yl)amino]methyl}-2,4,6-triethylbenzyl)amino]cyclopentyl}methanol

In the title monohydrate compound, 1a, and the methanol solvate compound, 1b, the tri-ethyl-benzene derivative, C35H51N5O, has three functionalized side arms and three ethyl groups, the former being located on one side of the central benzene ring, while the latter are directed to the opposite side. Both the crystals are constructed of structurally similar dimers of 1:1 host-guest complexes held together by N-H⋯O and O-H⋯N hydrogen bonds, and in 1a additionally by O-H⋯O hydrogen bonds. The structure of 1b contains additional highly disordered solvent mol-ecules. Thus, the SQUEEZE routine [Spek (2015 ▸). Acta Cryst. C71, 9-18] in PLATON was used to generate a modified data set, in which the contribution of the disordered mol-ecules to the structure amplitudes is eliminated. These solvent mol-ecules are not considered in the reported chemical formula.

Paving the Way for Practical Use of Sugar-Binding Natural Products as Lectin Mimics in Glycobiological Research

Pradimicins (PRMs) constitute an exceptional class of natural products that show Ca²⁺ -dependent recognition of d-mannose (Man). In addition to therapeutic uses as antifungal drugs, the application of PRMs as lectin mimics for glycobiological research has been attracting considerable interest, since the emerging biological roles of Man-containing glycans have been highlighted. However, only a few attempts have been made to use PRMs for glycobiological purposes. The limited use of PRMs is primarily due to the early assumption that the readily modifiable carboxyl group of PRMs is involved in Ca²⁺ binding, and thus, not available to prepare research tools. Recently, this assumption has been disproved by structural elucidation of the Ca²⁺ complex of PRMs, which paves the way for designing carboxyl group modified derivatives of PRMs for research use. This article outlines studies related to Ca²⁺ -mediated Man binding of PRMs and discusses their application for glycobiology.

Selective glucose sensing in complex media using a biomimetic receptor

Glucose is a key biomedical analyte, especially relevant to the management of diabetes. Current methods for glucose determination rely on the enzyme glucose oxidase, requiring specialist instrumentation and suffering from redox-active interferents. In a new approach, a powerful and highly selective achiral glucose receptor is mixed with a sample, l-glucose is added, and the induced CD spectrum is measured. The CD signal results from competition between the enantiomers, and is used to determine the d-glucose content. The involvement of l-glucose doubles the signal range from the CD spectrometer and allows sensitivity to be adjusted over a wide dynamic range. It also negates medium effects, which must be equal for both enantiomers. The method has been demonstrated with human serum, pre-filtered to remove proteins, giving results which closely match the standard biochemical procedures, as well as a cell culture medium and a beer sample containing high (70 mM) and low (0.4 mM) glucose concentrations respectively.

A Preorganized Hydrogen-Bonding Motif for the Molecular Recognition of Carbohydrates

The choice between adaptive and preorganized architectures, or of the most effective hydrogen bonding groups to be selected, are dilemmas that supramolecular chemists must address in designing synthetic receptors for such a challenging guest as carbohydrates. In this paper, structurally related architectures featuring two alternative hydrogen bonding motifs were compared to ascertain the structural and functional origin of their binding differences and the advantages that can be expected in monosaccharide recognition. A set of structurally related macrocyclic receptors were prepared, and their binding properties were measured by NMR and ITC techniques in chloroform vs a common saccharidic target, namely, the β-octyl glycoside of D-glucose. Results showed that the diaminocarbazolic motif, recently reported as the constituting unit of highly effective receptors for saccharides in water, is a superior hydrogen bonding motif compared to the previously described diaminopyrrolic motif, which was successfully employed in molecular recognition of carbohydrates in polar organic solvents, due to intrinsic structural and functional factors, rather than to hydrophobic contributions. In addition, the occurrence of a rare example of a thermodynamic template effect exerted by the beta-glucoside has been ascertained, enhancing the synthesis outcome of the otherwise low yielding preparation of the described macrocyclic receptors.

Biomimetic carbohydrate recognition

Binding saccharides with non-covalent interactions is challenging, especially in the natural medium of water, but synthetic carbohydrate receptors can be surprisingly effective.

Molecular Basis of Mannose Recognition by Pradimicins and their Application to Microbial Cell Surface Imaging

Naturally occurring pradimicins (PRMs) show specific recognition of d-mannose (d-Man) in aqueous media, which has never been achieved by artificial small molecules. Although the Ca²⁺-mediated dimerization of PRMs is essential for their d-Man binding, the dimeric structure has yet to be elucidated, leaving the question open as to how PRMs recognize d-Man. Thus, we herein report the structural elucidation of the dimer by a combination of X-ray crystallography and solid-state NMR spectroscopy. Coupled with our previous knowledge regarding the d-Man binding geometry of PRMs, elucidation of the dimer allowed reliable estimation of the mode of d-Man binding. Based on the binding model, we further developed an azide-functionalized PRM derivative (PRM-Azide) with d-Man binding specificity. Notably, PRM-Azide stained Candida rugosa cells having mannans on their cell surface through conjugation with the tetramethylrhodamine fluorophore. The present study provides the practical demonstration that PRMs can serve as lectin mimics for use in glycobiological studies.

Turn on macrocyclic chemosensor for Al3+ ion with facile synthesis and application in live cell imaging

An effort of a new Schiff base macrocyclic chemosensor, 1⁴‑methyl‑2,6,8,12,14,18‑hexaaza‑1,7,13(1,2),4,10,16(1,4)‑hexabenzenacyclooctadecaphane‑2,5,8,11,14,17‑hexaene (me1) and 1⁴,7⁴‑dimethyl‑2,6,8,12,14,18‑hexaaza‑1,7,13(1,2),4,10,16(1,4)‑hexabenzenacyclooctadecadecaphane‑2,5,8,11,14,17‑hexaene (dm2), which enables selective sensing of Al³⁺ in aqueous DMF were synthesized by a simplistic one-step condensation reaction of macrocyclic compounds. The probe me1 and dm2 characterized by elemental analysis, FT-IR, ¹H and ¹³C NMR, LC-MS spectral techniques. The compounds as mentioned above subjected to FE-SEM with EDS and elemental color mapping. On addition of Al³⁺, the fluorescent probe me1 and dm2 induces turn-on responses in both absorption and sensing spectra by a PET mechanism. The receptor me1 and dm2 serve highly selective, sensitive and turn-on detection of Al³⁺. Further, they did not interfere with other cations present in biological or environmental samples. The detection limit is found to be 3μM and 5μM. From the view of cytotoxic activity, the ability of these compounds me1 and dm2 to inhibit the growth of KB cell lines examined. The chelating functionality of compounds me1 and dm2 examined for their inhibitory properties of KB cell, live cell images. The compounds me1 and dm2 subjected to theoretical studies by DFT-B3LYP invoking the 6-31G level of theory. The energy of the HOMO and LUMO has been established.

Hexaphenolic Rigid Cages Prepared by Self-Organization of C3 v Tridentates

Coordination cages were composed by self-organization of rigid C_{3 v}-symmetric heptaarene tridentates and Pd(II) precursors. The heptaarene framework involves one mesitylene, three phenol, and three pyridine moieties, which were connected by Suzuki coupling reactions. The treatment of the tridentates with Pd(dppp)(OTf)₂ or Pd(en)(NO₃)₂ in a 2:3 molar ratio furnished coordination cages, which was ascertained by crystallography, ¹H NMR and DOSY measurements, and ESI-TOFMS and UV-vis spectra. The cages have six phenolic hydroxy groups inside and were expected to incorporate hydrogen-bonding guest molecules such as saccharides. CD and DOSY measurements showed that octyl hexoside guests could be incorporated into the cage.