Lattice Strained Induced Spin Regulation in Co-N/S Coordination-Framework Enhanced Oxygen Reduction Reaction

Oxygen reduction reaction (ORR) is the bottleneck of metal-air batteries and fuel cells. Strain regulation can change the geometry and adjust the surface charge distribution of catalysts, which is a powerful strategy to optimize the ORR activity. The introduction of controlled strain to the material is still difficult to achieve. Herein, we present a temperature-pressure-induced strategy to achieve the controlled lattice strain for metal coordination polymers. Through the systematic study of the strain effect on ORR performance, the relationship between geometric and electronic effects is further understood and confirmed. The strained Co-DABDT (DABDT=2,5-diaminobenzene-1,4-dithiol) with 2 % lattice compression exhibits a superior half-wave potential of 0.81 V. Theoretical analysis reveals that the lattice strain changes spin-charge densities around S atoms for Co-DABDT, and then regulates the hydrogen bond interaction with intermediates to promote the ORR catalytic process. This work helps to understand the catalytic mechanism from the atomic level.

Cobalt-based conjugated coordination polymers with tunable dimensions for electrochemical sensing of p-nitrophenol

Using planar π-conjugated 2,5-diamino-1,4-benzenedithiol as organic ligand, Co-based conjugated coordination polymers (CoCCPs) with different morphology were prepared through controlling the injection rate of Co2+. When the injection rate decreases from 1.00 to 0.25 mL min-1, the obtained CoCCPs change from 2D nanosheets to quasi-1D nanorods. It is found that the different-shaped CoCCPs exhibit varying electrochemical sensing performance. The prepared CoCCPs-1 with quasi-1D nanowires and porous network structure possesses larger active area, faster electron transfer and higher accumulation ability. Moreover, the CoCCPs-1 is more active for the oxidation of p-nitrophenol (PNP), and greatly enhances its oxidation signal. Based on the morphology-tuned sensing performance of CoCCPs, a highly-sensitive electrochemical sensor has been developed for PNP, with detection limit of 0.00986 μM (9.86 nM). It was used in the analysis of wastewater samples, and the results is validated by other instrumental method.

Conductive One-Dimensional Coordination Polymers with Tunable Selectivity for the Oxygen Reduction Reaction

Conductive materials involving nonprecious metal coordination complexes as electrocatalysts for the oxygen reduction reaction (ORR) have received increasing attention in recent years. Herein, we reported efficient ORR electrocatalysts containing M-S2N2 sites with tunable selectivity based on simple one-dimensional (1D) coordination polymers (CPs). The 1D CPs were synthesized from M(OAc)2 and 2,5-diamino-1,4-benzenedithiol (DABDT) by a solvent thermal method. Due to their good electrical conductivities (10-6-10-2 S cm-1), the 1D CPs could be used as ORR catalysts in low catalytic amounts without the addition of carbon materials. Cobalt-based CPs showed a well-organized structure of nanosheets with Co-S2N2 sites exposed and exhibited remarkable electrocatalytic ORR activity (Eonset = 0.93 V vs reversible hydrogen electrode (RHE), E1/2 = 0.82 V, n = 3.85, JL = 5.22 mA cm-2, Tafel slope of 63 mV dec-1) in alkaline media. However, nickel-based CPs favored a 2e- ORR process with ∼87% H2O2 selectivity and an Eonset of 0.78 V. This work provides new opportunities for the construction of ORR catalysts based on conductive nonprecious metal CPs.

Flexible Lead-Free X-ray Detector from Metal-Organic Frameworks

Semiconductive metal-organic frameworks (MOFs) obtained by specific host-guest interactions have attracted a large interest in the last two decades, promising development of next-generation electronic devices. Herein, we designed and presented flexible X-ray detectors using Ni-DABDT (DABDT = 2,5-diamino-1,4-benzenedithiol dihydrochloride) MOFs as the absorbing layer. The π-d coupling interactions of Ni-DABDT throughout the framework implement a conspicuous carrier transportation pathway. The detector that converts X-ray photons directly into carriers manifests an attractive achievement with high detection sensitivity of 98.6 μC Gy_air^-1 cm^-2, with a low detection limit of 7.2 μGy_air s^-1 for the radiation robustness. This work provides insights for next-generation green and high-performance flexible sensor detectors by utilizing MOF materials with the benefits of a designable structure and tunable property, demonstrating a proof-of-concept in wearable X-ray detectors for radiation monitoring and imaging.

Cu-based metal-organic frameworks for highly sensitive X-ray detectors

Here, we constructed Pb-free Cu-DABDT-MOFs-based (DABDT = 2,5-diamino-1,4-benzenedithiol) X-ray detectors. Combined with the advantage of high activation energy, the Cu-DABDT-MOFs-based detector can effectively generate and capture electrons under X-ray exposure and presents a high mobility-lifetime (μτ) product of 6.49 × 10^-4 cm² V^-1 and promising detection sensitivity of 78.7 μC Gy_air^-1 cm^-2. As groundbreaking work, these discoveries have provided information for exploring MOF materials toward green and high-performance high-energy radiation detectors by exploiting the designable structure and tunable properties of the MOF family.

Two-Dimensional Conductive π-d Frameworks with Multiple Sensory Capabilities

Two-dimensional (2D) metal-molecule hybrid frameworks have attracted great attention due to their π-d interactions for the charge-spin-lattice coupling, promising for next-generation molecular electronics. However, a high electrical conductivity is indispensable to realize such potential. Herein, we design and assemble a conductive 2D conjugated coordination thin film through an interfacial reaction between the aqueous and organic phases. Its electronic conducting properties are derived from the π-d coupling interactions to achieve an electrical conductivity of 1.05 S/cm, while the stimulus-dependent π-d interactions induce multifunctional sensory capabilities. The Co-DABDT (DABDT = 2,5-diamino-1,4-benzenedithiol dihydrochloride) thin films demonstrate an excellent performance for sensing light, strain, temperature, and humidity, as well as robust mechanical stability. The 2D frameworks with multisensing properties for real-time static and dynamic monitoring are promising for smart wearable electronic systems.

Nanostructured Metal-Organic Conjugated Coordination Polymers with Ligand Tailoring for Superior Rechargeable Energy Storage

Conjugated coordination polymers have become an emerging category of redox-active materials. Although recent studies heavily focus on the tailoring of metal centers in the complexes to achieve stable electrochemical performance, the effect on different substitutions of the bridging bonds has rarely been studied. An innovative tailoring strategy is presented toward the enhancement of the capacity storage and the stability of metal-organic conjugated coordination polymers. Two nanostructured d-π conjugated compounds, Ni[C₆ H₂ (NH)₄ ]_n (Ni-NH) and Ni[C₆ H₂ (NH)₂ S₂ ]_n (Ni-S), are evaluated and demonstrated to exhibit hybrid electrochemical processes. In particular, Ni-S delivers a high reversible capacity of 1164 mAh g^-1 , an ultralong stability up to 1500 cycles, and a fully recharge ability in 67 s. This tailoring strategy provides a guideline to design future effective conjugated coordination-polymer-based electrodes.

Synthesis, structure and characterization of a layered coordination polymer based on Zn(ii) and 6-(methylmercapto)purine

A layered coordination polymer was synthesized from Zn(ii) and 6-(methylmercapto)purine (mMP-H) in N,N-dimethylformamide (DMF). Its structure and formula [Zn₂(μ₂-mMP)₃(NO₃)(DMF)(H₂O)]_n·nDMF were determined by single crystal X-ray diffraction.

Effects of added thiol ligand structure on aggregation of non-aqueous ZnO dispersions and morphology of spin-coated films

The structure of bidentate thiol ligands controls dispersion aggregation and enables spin coating of ZnO films with enhanced light scattering.

One pot synthesis of coordination polymer 2,5-dimercapto-1,3,4-thiadiazole–gold and its application in voltammetric sensing of resorcinol

The synthesized coordination polymer DMTD–Au has a layered structure, in which the layers are stacked via π–π stacking and hydrophobic interaction. It facilitates electron transfer kinetics, which has been utilized in the ultra trace sensing of resorcinol.