Proton Transfer via Arginine with Suppressed pKa Mediates Catalysis by Gentisate and Salicylate Dioxygenase

Gentisate and salicylate 1,2-dioxygenases (GDO and SDO) facilitate aerobic degradation of aromatic rings by inserting both atoms of dioxygen into their substrates, thereby participating in global carbon cycling. The role of acid-base catalysts in the reaction cycles of these enzymes is debatable. We present evidence of the participation of a proton shuffler during catalysis by GDO and SDO. The pH dependence of Michaelis-Menten parameters demonstrates that a single proton transfer is mandatory for the catalysis. Measurements at variable temperatures and pHs were used to determine the standard enthalpy of ionization (ΔHion°) of 51 kJ/mol for the proton transfer event. Although the observed apparent pKa in the range of 6.0-7.0 for substrates of both enzymes is highly suggestive of a histidine residue, ΔHion° establishes an arginine residue as the likely proton source, providing phylogenetic relevance for this strictly conserved residue in the GDO family. We propose that the atypical 3-histidine ferrous binding scaffold of GDOs contributes to the suppression of arginine pKa and provides support for this argument by employing a 2-histidine-1-carboxylate variant of the enzyme that exhibits elevated pKa. A reaction mechanism considering the role of the proton source in stabilizing key reaction intermediates is proposed.

Oxygen Activation in Aromatic Ring Cleaving Salicylate Dioxygenase: Detection of Reaction Intermediates with a Nitro-substituted Substrate Analog

Cupin dioxygenases such as salicylate 1,2-dioxygense (SDO) perform aromatic C-C bond scission via a 3-His motif tethered iron cofactor. Here, transient kinetics measurements are used to monitor the catalytic cycle of SDO by using a nitro-substituted substrate analog, 3-nitrogentisate. Compared to the natural substrate, the nitro group reduces the enzymatic kcat by 500-fold, thereby facilitating the detection and kinetic characterization of reaction intermediates. Sums and products of reciprocal relaxation times derived from kinetic measurements were found to be linearly dependent on O2 concentration, suggesting reversible formation of two distinct intermediates. Dioxygen binding to the metal cofactor takes place with a forward rate of 5.9×103 M-1 s-1: two orders of magnitude slower than other comparable ring-cleaving dioxygenses. Optical chromophore of the first intermediate is distinct from the in situ generated SDO Fe(III)-O2⋅- complex but closer to the enzyme-substrate precursor.

Homoprotocatechuate dioxygenase active site: Imitating the secondary sphere base via computational design

Oxidative ring cleavage reactions have attracted great interest and various studies on the catechol ring-cleaving enzyme homoprotocatechuate dioxygenase (HPCD) have been reported in the literature. The available data on how the proton transfer takes place led us to design a potential HPCD model structure. A secondary sphere effect of utmost importance, the assistance of His200, which is critical for the catechol proton to migrate to dioxygen, was cautiously included on the first coordination shell. This was done mainly by modifying the axial ligands in the first coordination shell of HPCD such that the dual basic/acidic role in the proton transfer pathway of His200 was reproduced. Model systems with mono-, bi-, and tridentate ligands are reported. Energetically feasible reaction channels on synthetically promising ligand structures are identified. Key structural and electronic principles for obtaining viable proton transfer paths are outlined.

Unraveling the Pivotal Roles of Various Metal Ion Centers in the Catalysis of Quercetin 2,4-Dioxygenases

Quercetin 2,4-dioxygenase (QueD) with various transition metal ion co-factors shows great differences, but the internal reasons have not been illustrated in detail. In order to explore the effects of metal ion centers on the catalytic reactivity of QueD, we calculated and compared the minimum energy crossing point (MECP) of dioxygen from the relatively stable triplet state to the active singlet state under different conditions by using the DFT method. It was found that the metal ions play a more important role in the activation of dioxygen compared with the substrate and the protein environment. Simultaneously, the catalytic reactions of the bacterial QueDs containing six different transition metal ions were studied by the QM/MM approach, and we finally obtained the reactivity sequence of metal ions, Ni2+ > Co2+ > Zn2+ > Mn2+ > Fe2+ > Cu2+, which is basically consistent with the previous experimental results. Our calculation results indicate that metal ions act as Lewis acids in the reaction to stabilize the substrate anion and the subsequent superoxo and peroxo species in the reaction, and promote the proton coupled electron transfer (PCET) process. Furthermore, the coordination tendencies of transition metal ion centers also have important effects on the catalytic cycle. These findings have general implications on metalloenzymes, which can expand our understanding on how various metal ions play their key role in modulating catalytic reactivity.

Nuclear Resonance Vibrational Spectroscopy Definition of Peroxy Intermediates in Catechol Dioxygenases: Factors that Determine Extra- versus Intradiol Cleavage

The extradiol dioxygenases (EDOs) and intradiol dioxygenases (IDOs) are nonheme iron enzymes that catalyze the oxidative aromatic ring cleavage of catechol substrates, playing an essential role in the carbon cycle. The EDOs and IDOs utilize very different FeII and FeIII active sites to catalyze the regiospecificity in their catechol ring cleavage products. The factors governing this difference in cleavage have remained undefined. The EDO homoprotocatechuate 2,3-dioxygenase (HPCD) and IDO protocatechuate 3,4-dioxygenase (PCD) provide an opportunity to understand this selectivity, as key O2 intermediates have been trapped for both enzymes. Nuclear resonance vibrational spectroscopy (in conjunction with density functional theory calculations) is used to define the geometric and electronic structures of these intermediates as FeII-alkylhydroperoxo (HPCD) and FeIII-alkylperoxo (PCD) species. Critically, in both intermediates, the initial peroxo bond orientation is directed toward extradiol product formation. Reaction coordinate calculations were thus performed to evaluate both the extra- and intradiol O-O cleavage for the simple organic alkylhydroperoxo and for the FeII and FeIII metal catalyzed reactions. These results show the FeII-alkylhydroperoxo (EDO) intermediate undergoes facile extradiol O-O bond homolysis due to its extra e-, while for the FeIII-alkylperoxo (IDO) intermediate the extradiol cleavage involves a large barrier and would yield the incorrect extradiol product. This prompted our evaluation of a viable mechanism to rearrange the FeIII-alkylperoxo IDO intermediate for intradiol cleavage, revealing a key role in the rebinding of the displaced Tyr447 ligand in this rearrangement, driven by the proton delivery necessary for O-O bond cleavage.

Microbial rhodoquinone biosynthesis proceeds via an atypical RquA-catalyzed amino transfer from S-adenosyl-L-methionine to ubiquinone

Rhodoquinone (RQ) is a close analogue of ubiquinone (UQ) that confers diverse bacterial and eukaryotic taxa the ability to utilize fumarate as an electron acceptor in hypoxic conditions. The RquA protein, identified in a Rhodospirillum rubrum RQ-deficient mutant, has been shown to be required for RQ biosynthesis in bacteria. In this report, we demonstrate that RquA, homologous to SAM-dependent methyltransferases, is necessary and sufficient to catalyze RQ biosynthesis from UQ in vitro. Remarkably, we show that RquA uses SAM as the amino group donor in a substitution reaction that converts UQ to RQ. In contrast to known aminotransferases, RquA does not use pyridoxal 5'-phosphate (PLP) as a coenzyme, but requires the presence of Mn²⁺ as a cofactor. As these findings reveal, RquA provides an example of a non-canonical SAM-dependent enzyme that does not catalyze methyl transfer, instead it uses SAM in an atypical amino transfer mechanism.

Mechanistic Studies on the Single-Turnover Yeast Thiamin Pyrimidine Synthase: Characterization of the Inactive Enzyme

The eukaryotic thiamin pyrimidine synthase, THI5p, has been identified as a suicidal/single-turnover enzyme that catalyzes the conversion of its active site histidine and lysine-bound pyridoxal phosphate (PLP) to the thiamin pyrimidine (HMP-P). Here we identify the histidine and PLP fragments using bottom-up proteomics and LC-MS analysis. We also identify the active form of the iron cofactor and quantitate the oxygen requirement of the THI5p reaction. This information is integrated into a mechanistic proposal for this remarkable reaction.

Charge Maintenance during Catalysis in Nonheme Iron Oxygenases

Here, the choice of the first coordination shell of the metal center is analyzed from the perspective of charge maintenance in a binary enzyme-substrate complex and an O₂-bound ternary complex in the nonheme iron oxygenases. Comparing homogentisate 1,2-dioxygenase and gentisate dioxygenase highlights the significance of charge maintenance after substrate binding as an important factor that drives the reaction coordinate. We then extend the charge analysis to several common types of nonheme iron oxygenases containing either a 2-His-1-carboxylate facial triad or a 3-His or 4-His ligand motif, including extradiol and intradiol ring-cleavage dioxygenases, thiol dioxygenases, α-ketoglutarate-dependent oxygenases, and carotenoid cleavage oxygenases. After forming the productive enzyme-substrate complex, the overall charge of the iron complex at the 0, +1, or +2 state is maintained in the remaining catalytic steps. Hence, maintaining a constant charge is crucial to promote the reaction of the iron center beginning from the formation of the Michaelis or ternary complex. The charge compensation to the iron ion is tuned not only by protein-derived carboxylate ligands but also by substrates. Overall, these analyses indicate that charge maintenance at the iron center is significant when all the necessary components form a productive complex. This charge maintenance concept may apply to most oxygen-activating metalloenzymes systems that do not draw electrons and protons step-by-step from a separate reactant, such as NADH, via a reductase. The charge maintenance perception may also be useful in proposing catalytic pathways or designing prototypical reactions using artificial or engineered enzymes for biotechnological applications.

Aerobic Oxidation Reactivity of Well-Defined Cobalt(II) and Cobalt(III) Aminophenol Complexes

This paper describes the synthesis and reactivity studies of three cobalt complexes bearing aminophenol-derived ligands without nitrogen substitution: Co^II(^tBu2APH)₂(^tBu2AP)₂ (1), Co^III₂(^tBu2APH)₂(^tBu2AP)₂(μ-^tBu2BAP)₂ (2), and Co^III(^tBu2AP)₃ (3), where ^tBu2APH = 2-amino-4,6-di-tert-butylphenol, ^tBu2AP = 2-amino-4,6-di-tert-butylphenolate, and μ-^tBu2BAP = bridging 2-amido-4,6-di-tert-butylphenolate. Stoichiometric reactivity studies of these well-defined complexes demonstrate the catalytic competency of both cobalt(II) and cobalt(III) complexes in the aerobic oxidative cyclization of ^tBu2APH with tert-butylisonitrile. Reactions with O₂ reveal the aerobic oxidation of the cobalt(II) complex 1 to generate the cobalt(III) species 2 and 3. UV-visible time-course studies and electron paramagnetic resonance spectroscopy indicate that this oxidation proceeds through a ligand-based radical intermediate. These studies represent the first example of well-defined cobalt aminophenol complexes that participate in catalytic aerobic oxidation reactions and highlight a key role for a ligand radical in the oxidation sequence.

Computational Study of Aromatic Hydroxylation Catalyzed by the Iron-Dependent Hydroxylase PqqB Involved in the Biosynthesis of Redox Cofactor Pyrroloquinoline Quinone

PqqB from Methylobacterium extorquens is a unique nonheme iron-dependent hydroxylase involved in the biosynthesis of redox cofactor pyrroloquinoline quinone (PQQ). A series of recent experiments have demonstrated that PqqB catalyzes the stepwise insertions of two oxygen atoms into the tyrosine ring of the diamino acid substrate, generating the quinone moiety of PQQ; however, the reaction details have not been elucidated yet. In this paper, on the basis of the crystal structures, the enzyme-substrate complex models were constructed, and the catalytic mechanism of PqqB was explored by performing a series of combined QM/MM calculations. Our results confirmed that the first hydroxylation is performed by the highly reactive Fe^IV-oxo species and follows the typical H-abstraction/hydroxyl rebound mechanism, which is similar to the common aliphatic hydroxylation catalyzed by the α-KG enzymes. Nevertheless, the second hydroxylation is achieved by the Fe-O₂ species, and the reactant complex can be described as an intermediate radical-Fe^II-superoxide, that is, the dioxygen is activated by accepting an electron from the bidentate coordination intermediate. Since both the dioxygen and intermediate are activated by electron transfer, the distal oxygen of superoxide can directly attack the carbonyl carbon of substrate to form an alkylperoxo intermediate, then the O-O heterolysis occurs to afford the epoxide intermediate, which finally evolves into the product by rearrangement. It is the bidentate coordination of catechol moiety to iron that leads to the one-electron oxidation of the substrate by the dioxygen, which significantly activates the substrate and promotes the superoxide radical attack. During the catalysis, Asp90 and His240 in the second sphere play an important role by acting as acid-base catalysts to mediate the proton transfer and manipulate the suitable orientation of superoxide. These findings may provide useful information for understanding the unique reaction mechanism of PqqB that employs both the Fe^IV-oxo and Fe^II-superoxide to carry out the aromatic hydroxylation.

Decoding Regioselective Reaction Mechanism of the Gentisic Acid Catalyzed by Gentisate 1,2-Dioxygenase Enzyme

Gentisate 1,2-dioxygenase (GDO), a ring-fission non-heme dioxygenase enzyme, displays a unique regioselective reaction of gentisic acid (GTQ) in the presence of molecular oxygen. GTQ is an important intermediate in the...

Tuning the stereoelectronic factors of iron(II)-2-aminophenolate complexes for the reaction with dioxygen: oxygenolytic C-C bond cleavage vs. oxidation of complex

Oxidative C-C bond cleavage of 2-aminophenols mediated by transition metals and dioxygen is a topic of great interest. While the oxygenolytic C-C bond cleavage reaction relies on the inherent redox non-innocent property of 2-aminophenols, the metal complexes of 2-aminophenolates often undergo 1e-/2e- oxidation events (metal or ligand oxidation), instead of the direct addition of O2 for subsequent C-C bond cleavage. In this work, we report the isolation, characterization and dioxygen reactivity of a series of ternary iron(ii)-2-aminophenolate complexes [(TpPh,Me)FeII(X)], where X = 2-amino-4-tert-butylphenolate (4-tBu-HAP) (1); X = 2-amino-4,6-di-tert-butylphenolate (4,6-di-tBu-HAP) (2); X = 2-amino-4-nitrophenolate (4-NO2-HAP)(3); and X = 2-anilino-4,6-di-tert-butylphenolate (NH-Ph-4,6-di-tBu-HAP) (4) supported by a facial tridentate nitrogen donor ligand (TpPh,Me = hydrotris(3-phenyl-5-methylpyrazol-1-yl)borate). Another facial N3 ligand (TpPh2 = hydrotris(3,5-diphenyl-pyrazol-1-yl)borate) has been used to isolate an iron(ii)-2-anilino-4,6-di-tert-butylphenolate complex (5) for comparison. Both [(TpPh,Me)FeII(4-tBu-HAP)] (1) and [(TpPh,Me)FeII(4,6-di-tBu-HAP)] (2) undergo regioselective oxidative aromatic ring fission reaction of the coordinated 2-aminophenols to the corresponding 2-picolinic acids in the reaction with dioxygen. In contrast, complex [(TpPh,Me)FeII(4-NO2-HAP)] (3) displays metal based oxidation to form an iron(iii)-2-amidophenolate complex. Complexes [(TpPh,Me)FeII(NH-Ph-4,6-di-tBu-HAP)] (4) and [(TpPh2)FeII(NH-Ph-4,6-di-tBu-HAP)] (5) react with dioxygen to undergo 2e- oxidation with the formation of the corresponding iron(iii)-2-iminobenzosemiquinonato radical species implicating the importance of the -NH2 group in directing the C-C bond cleavage reactivity of 2-aminophenols. The systematic study presented in this work unravels the effect of the electronic and structural properties of the redox non-innocent 2-aminophenolate ring and the supporting ligand on the C-C bond cleavage reactivity vs. the metal/ligand oxidation of the complexes. The study further reveals that proper modulation of the stereoelectronic factors enables us to design a well synchronised proton transfer (PT) and dioxygen binding events for complexes 1 and 2 that mimic the structure and function of the nonheme enzyme 2-aminophenol-1,6-dioxygenase (APD).

Mechanistic Insights into the Oxidative Rearrangement Catalyzed by the Unprecedented Dioxygenase ChaP Involved in Chartreusin Biosynthesis

ChaP is a non-heme iron-dependent dioxygenase belonging to the vicinal oxygen chelate (VOC) enzyme superfamily that catalyzes the final α-pyrone ring formation in the biosynthesis of chartreusin. In contrast to other common dioxygenases, for example, 2,3-catechol dioxygenase which uses the dioxygen molecule as the oxidant, ChaP requires the flavin-activated oxygen (O₂^2-) as the equivalent. Previous experiments showed that the ChaP-catalyzed ring rearrangement contains two successive C-C bond cleavages and one lactonization; however, the detailed reaction mechanism is unknown. In this work, on the basis of the recently obtained crystal structure of ChaP, the computational model was constructed and the catalytic mechanism of ChaP was explored by performing quantum mechanical/molecular mechanical (QM/MM) calculations. Our calculation results reveal that ChaP uses the proximal oxygen in iron-coordinated HOO^- to attack the carbonyl carbon of the substrate, whereas the previous proposal that Asp49 acts as a base to deprotonate the iron-coordinated HOO^- to generate O₂^2- is unlikely. In the first stage reaction, owing to the coordination of the substrate with iron, the substrate is activated by accepting an electron from iron and the resulting oxy-radical intermediate formed by O-O cleavage can easily trigger the ring rearrangement. In the final decarboxylation, the phenolic anion of the substrate cooperatively accepts the proton of iron-coordinated HOO^- to facilitate the attack of the distal oxygen, and the proton-coupled electron transfer (PCET) from the substrate to the Fe^IV═O plays a key role for the decarboxylation. These findings may provide useful information for understanding the ChaP-catalyzed oxidative rearrangement and other flavin-dependent non-heme dioxygenases.

A novel concept for the biodegradation mechanism of dianionic catechol with homoprotocatechuate 2,3-dioxygenase: A non-proton-assisted process

The theory of "proton-assisted process" can well explain the catalytic mechanism of homoprotocatechuate 2,3-dioxygenase (2,3-HPCD) with a monoanionic substrate (homoprotocatechuate, HPCA). Here a "non-proton-assisted process" is presented to interpret catalytic mechanism of 2,3-HPCD with a dianionic substrate (4-nitrocatechol, 4NC). The ONIOM calculation is performed to investigate the reaction pathway of a wild-type 2,3-HPCD with 4NC (H200H-4NC system). The catalytic reaction is comprised of four steps: (1) A dioxygen attacks the aromatic ring to produce an alkylperoxo species. (2) O-O bond cleavage and the formation of an epoxide species occur. (3) A seven-membered O-heterocyclic compound is generated by the extinction of the epoxy structure. (4) The seven-membered ring undergoes ring opening to form the final product (C2-C3 cleavage product). The effective free energy barrier of the catalytic reaction of the H200H-4NC system is 26.2 kcal mol^-1, which is much higher than that of the H200H-HPCA system. Furthermore, two calculated electronic configurations (Fe(III)-O₂^•- and Fe(III)-SQ^•) have a high similarity to previously detected ones, which demonstrates that the Asn200 variant (H200N-4NC variant system) employs a C4 (para-carbon) pathway to produce a C4-C5 cleavage product. Our findings provide an in-depth understanding of the catalytic mechanisms of dianionic catechol and its derivatives.

Theoretical Identification of the Factors Governing the Reactivity of C-H Bond Activation by Non-Heme Iron(IV)-Oxo Complexes

Selective functionalization of C-H bonds provides a straightforward approach to a large variety of well-defined derivatives. High-valent mononuclear iron(IV)-oxo complexes are proposed to carry out these C-H activation reactions in enzymes or in biomimetic syntheses. In this Minireview, we aim to highlight the features that delineate the distinct reactivity of non-heme oxo-iron(IV) motifs to cleave strong C-H bonds in hydrocarbons, primarily focusing on the hydrogen atom transfer (HAT) process. We describe how the structural and electronic properties of supporting ligands modulate the oxidative property of the iron(IV)-oxo complexes. Furthermore, we highlight the decisive role played by spin-state in these biomimetic reactions. We also discuss how tunneling and external perturbations like electric field influence the transfer of hydrogen atoms. Lastly, we emphasize how computations could work as a practical guide to sketch and develop synthetic models with greater efficacy.

Mechanistic insights into a non-heme 2-oxoglutarate-dependent ethylene-forming enzyme: selectivity of ethylene-formation versusl-Arg hydroxylation

The ethylene-forming enzyme (EFE) is a unique member of the Fe(ii)- and 2-oxoglutarate-dependent (Fe/2OG) oxygenases. It converts 2OG into ethylene plus three CO2 molecules (ethylene-forming reaction) and also catalyzes the C5 hydroxylation of l-arginine coupled to the oxidative decarboxylation of 2OG (l-Arg hydroxylation reaction). To uncover the mechanisms of the dual transformations by EFE, quantum mechanical/molecular mechanical (QM/MM) calculations were carried out. Based on the results, a branched mechanism was proposed. An FeII-peroxysuccinate complex with a dissociated CO2 generated through the nucleophilic attack of the superoxo moiety of the Fe-O2 species on the keto carbon of 2OG is the key common intermediate in both reactions. A competition between the subsequent CO2 insertion (a key step in the ethylene-forming pathway) and the O-O bond cleavage (leading to the formation of succinate) governs the product selectivity. The calculated reaction barriers suggested that the CO2 insertion is favored over the O-O bond cleavage. This is consistent with the product preference observed in experiments. By comparison with the results of AsqJ (an Fe/2OG oxygenase that leads to substrate oxidation exclusively), the protein environment was found to be crucial for the selectivity. Further calculations demonstrated that the local electric field of the protein environment in EFE promotes ethylene formation by acting as a charge template, exemplifying the importance of the electrostatic interaction in enzyme catalysis. These findings offer mechanistic insights into the EFE catalysis and provide important clues for better understanding the unique ethylene-forming capability of EFE compared with other Fe/2OG oxygenases.

The role of halogen substituents and substrate pKa in defining the substrate specificity of 2,6-dichlorohydroquinone 1,2-dioxygenase (PcpA)

2,6-Dichlorohydroquinone 1,2-dioxygenase (PcpA) is a non-heme Fe(II) enzyme that is specific for ortho-dihalohydroquinones. Here we deconvolute the role of halogen polarizability vs. substrate pK_a in defining this specificity, and show how substrate binding compares to the structurally homologous catechol extradiol dioxygenases. The substrates 2,6-dichloro- and 2,6-dibromohydroquinone (polarizable halogens, pK_a1 = 7.3), 2,6-difluorohydroquinone (nonpolarizable halogens, pK_a1 = 7.5), and 2-chloro-6-methylhydroquinone (polarizable halogen, pK_a1 = 9.0) were examined through spectrophotometric titrations and steady-state kinetics. The results show that binding of the substrates to the enzyme decreased [Formula: see text] by about 0.5, except for 2,6-difluorohydroquinone, which showed no change. Additionally, the K_d values of 2,6-dichloro- and 2,6-dibromohydroquinone are about equal to their respective [Formula: see text]. For comparison, with catechol 2,3-dioxygenase (XylE), the substrates 4-methyl- and 3-bromocatechol are bound to the enzyme exclusively in the monoanion form over a wide pH range, indicating a [Formula: see text] of at least - 2.9 and - 1.2, respectively. The steady-state kinetic studies showed that 2,6-difluorohydroquinone is a poor substrate, with [Formula: see text] approximately 40-fold lower and [Formula: see text] 20-fold higher than 2,6-dichlorohydroquinone, despite its similar pK_a1. Likewise, the pH dependence of [Formula: see text] for 2-chloro-6-methylhydroquinone is nearly identical to that of 2,6-dichlorohydroquinone, despite its very different pK_a1. These results show that (1) it is clearly the halogen polarizability and not the lower substrate pK_a that determines the substrate specificity of PcpA, and (2) that PcpA, unlike the catechol extradiol dioxygenases, lacks an active site base that assists with substrate deprotonation, highlighting a key functional difference in what are otherwise similar active sites that defines their different reactivity.

Mechanistic Insights into a Stibene Cleavage Oxygenase NOV1 from Quantum Mechanical/Molecular Mechanical Calculations

NOV1, a stilbene cleavage oxygenase, catalyzes the cleavage of the central double bond of stilbenes to two phenolic aldehydes, using a 4-His Fe(II) center and dioxygen. Herein, we use in-protein quantum mechanical/molecular mechanical (QM/MM) calculations to elucidate the reaction mechanism of the central double bond cleavage of phytoalexin resveratrol by NOV1. Our results showed that the oxygen molecule prefers to bind to the iron center in a side-on fashion, as suggested from the experiment. The quintet Fe-O2 complex with the side-on superoxo antiferromagnetic coupled to the resveratrol radical is identified as the reactive oxygen species. The QM/MM results support the dioxygenase mechanism involving a dioxetane intermediate with a rate-limiting barrier of 10.0 kcal mol-1. The alternative pathway through an epoxide intermediate is ruled out due to a larger rate-limiting barrier (26.8 kcal mol-1). These findings provide important insight into the catalytic mechanism of carotenoid cleavage oxygenases and also the dioxygen activation of non-heme enzymes.

Mechanistic insights into ring cleavage of hydroquinone by PnpCD from quantum mechanical/molecular mechanical calculations

QM/MM calculations for ring cleavage of hydroquinone by PnpCD show that Asn258 loses coordination to the iron when the reaction begins. The first-sphere Glu262 can act as an acid–base catalyst to lower the rate-limiting barrier.

Nuclear Resonance Vibrational Spectroscopy Definition of O2 Intermediates in an Extradiol Dioxygenase: Correlation to Crystallography and Reactivity

The extradiol dioxygenases are a large subclass of mononuclear nonheme Fe enzymes that catalyze the oxidative cleavage of catechols distal to their OH groups. These enzymes are important in bioremediation, and there has been significant interest in understanding how they activate O₂. The extradiol dioxygenase homoprotocatechuate 2,3-dioxygenase (HPCD) provides an opportunity to study this process, as two O₂ intermediates have been trapped and crystallographically defined using the slow substrate 4-nitrocatechol (4NC): a side-on Fe-O₂-4NC species and a Fe-O₂-4NC peroxy bridged species. Also with 4NC, two solution intermediates have been trapped in the H200N variant, where H200 provides a second-sphere hydrogen bond in the wild-type enzyme. While the electronic structure of these solution intermediates has been defined previously as Fe^III-superoxo-catecholate and Fe^III-peroxy-semiquinone, their geometric structures are unknown. Nuclear resonance vibrational spectroscopy (NRVS) is an important tool for structural definition of nonheme Fe-O₂ intermediates, as all normal modes with Fe displacement have intensity in the NRVS spectrum. In this study, NRVS is used to define the geometric structure of the H200N-4NC solution intermediates in HPCD as an end-on Fe^III-superoxo-catecholate and an end-on Fe^III-hydroperoxo-semiquinone. Parallel calculations are performed to define the electronic structures and protonation states of the crystallographically defined wild-type HPCD-4NC intermediates, where the side-on intermediate is found to be a Fe^III-hydroperoxo-semiquinone. The assignment of this crystallographic intermediate is validated by correlation to the NRVS data through computational removal of H200. While the side-on hydroperoxo semiquinone intermediate is computationally found to be nonreactive in peroxide bridge formation, it is isoenergetic with a superoxo catecholate species that is competent in performing this reaction. This study provides insight into the relative reactivities of Fe^III-superoxo and Fe^III-hydroperoxo intermediates in nonheme Fe enzymes and into the role H200 plays in facilitating extradiol catalysis.

Probing the transcriptome of Aconitum carmichaelii reveals the candidate genes associated with the biosynthesis of the toxic aconitine-type C19-diterpenoid alkaloids

Aconitum carmichaelii has long been used as a traditional Chinese medicine, and its processed lateral roots are known commonly as fuzi. Aconitine-type C₁₉-diterpenoid alkaloids accumulating in the lateral roots are some of the main toxicants of this species, yet their biosynthesis remains largely unresolved. As a first step towards understanding the biosynthesis of aconitine-type C₁₉-diterpenoid alkaloids, we performed de novo transcriptome assembly and analysis of rootstocks and leaf tissues of Aconitum carmichaelii by next-generation sequencing. A total of 525 unigene candidates were identified as involved in the formation of C₁₉-diterpenoid alkaloids, including those encoding enzymes in the early steps of diterpenoid alkaloids scaffold biosynthetic pathway, such as ent-copalyl diphosphate synthases, ent-kaurene synthases, kaurene oxidases, cyclases, and key aminotransferases. Furthermore, candidates responsible for decorating of diterpenoid alkaloid skeletons were discovered from transcriptome sequencing of fuzi, such as monooxygenases, methyltransferase, and BAHD acyltransferases. In addition, 645 differentially expressed genes encoding transcription factors potentially related to diterpenoid alkaloids accumulation underground were documented. Subsequent modular domain structure phylogenetics and differential expression analysis led to the identification of BAHD acyltransferases possibly involved in the formation of acetyl and benzoyl esters of diterpenoid alkaloids, associated with the acute toxicity of fuzi. The transcriptome data provide the foundation for future research into the molecular basis for aconitine-type C₁₉-diterpenoid alkaloids biosynthesis in A. carmichaelii.

NRVS Studies of the Peroxide Shunt Intermediate in a Rieske Dioxygenase and Its Relation to the Native FeII O2 Reaction

The Rieske dioxygenases are a major subclass of mononuclear nonheme iron enzymes that play an important role in bioremediation. Recently, a high-spin FeIII-(hydro)peroxy intermediate (BZDOp) has been trapped in the peroxide shunt reaction of benzoate 1,2-dioxygenase. Defining the structure of this intermediate is essential to understanding the reactivity of these enzymes. Nuclear resonance vibrational spectroscopy (NRVS) is a recently developed synchrotron technique that is ideal for obtaining vibrational, and thus structural, information on Fe sites, as it gives complete information on all vibrational normal modes containing Fe displacement. In this study, we present NRVS data on BZDOp and assign its structure using these data coupled to experimentally calibrated density functional theory calculations. From this NRVS structure, we define the mechanism for the peroxide shunt reaction. The relevance of the peroxide shunt to the native FeII/O2 reaction is evaluated. For the native FeII/O2 reaction, an FeIII-superoxo intermediate is found to react directly with substrate. This process, while uphill thermodynamically, is found to be driven by the highly favorable thermodynamics of proton-coupled electron transfer with an electron provided by the Rieske [2Fe-2S] center at a later step in the reaction. These results offer important insight into the relative reactivities of FeIII-superoxo and FeIII-hydroperoxo species in nonheme Fe biochemistry.

Density Functional Calculations for Prediction of 57Fe Mössbauer Isomer Shifts and Quadrupole Splittings in β-Diketiminate Complexes

The relative ease of Mössbauer spectroscopy and of density functional theory (DFT) calculations encourages the use of Mössbauer parameters as a validation method for calculations, and the use of calculations as a double check on crystallographic structures. A number of studies have proposed correlations between the computationally determined electron density at the iron nucleus and the observed isomer shift, but deviations from these correlations in low-valent iron β-diketiminate complexes encouraged us to determine a new correlation for these compounds. The use of B3LYP/def2-TZVP in the ORCA platform provides an excellent balance of accuracy and speed. We provide here not only this new correlation and a clear guide to its use but also a systematic analysis of the limitations of this approach. We also highlight the impact of crystallographic inaccuracies, DFT model truncation, and spin states, with intent to assist experimentalists to use Mössbauer spectroscopy and calculations together.

Biological functions controlled by manganese redox changes in mononuclear Mn-dependent enzymes

Remarkably few enzymes are known to employ a mononuclear manganese ion that undergoes changes in redox state during catalysis. Many questions remain to be answered about the role of substrate binding and/or protein environment in modulating the redox properties of enzyme-bound Mn(II), the nature of the dioxygen species involved in the catalytic mechanism, and how these enzymes acquire Mn(II) given that many other metal ions in the cell form more stable protein complexes. Here, we summarize current knowledge concerning the structure and mechanism of five mononuclear manganese-dependent enzymes: superoxide dismutase, oxalate oxidase (OxOx), oxalate decarboxylase (OxDC), homoprotocatechuate 3,4-dioxygenase, and lipoxygenase (LOX). Spectroscopic measurements and/or computational studies suggest that Mn(III)/Mn(II) are the catalytically active oxidation states of the metal, and the importance of 'second-shell' hydrogen bonding interactions with metal ligands has been demonstrated for a number of examples. The ability of these enzymes to modulate the redox properties of the Mn(III)/Mn(II) couple, thereby allowing them to generate substrate-based radicals, appears essential for accessing diverse chemistries of fundamental importance to organisms in all branches of life.

Theoretical Study of the Mechanism of the Nonheme Iron Enzyme EgtB

EgtB is a nonheme iron enzyme catalyzing the C-S bond formation between γ-glutamyl cysteine (γGC) and N-α-trimethyl histidine (TMH) in the ergothioneine biosynthesis. Density functional calculations were performed to elucidate and delineate the reaction mechanism of this enzyme. Two different mechanisms were considered, depending on whether the sulfoxidation or the S-C bond formation takes place first. The calculations suggest that the S-O bond formation occurs first between the thiolate and the ferric superoxide, followed by homolytic O-O bond cleavage, very similar to the case of cysteine dioxygenase. Subsequently, proton transfer from a second-shell residue Tyr377 to the newly generated iron-oxo moiety takes place, which is followed by proton transfer from the TMH imidazole to Tyr377, facilitated by two crystallographically observed water molecules. Next, the S-C bond is formed between γGC and TMH, followed by proton transfer from the imidazole CH moiety to Tyr377, which was calculated to be the rate-limiting step for the whole reaction, with a barrier of 17.9 kcal/mol in the quintet state. The calculated barrier for the rate-limiting step agrees quite well with experimental kinetic data. Finally, this proton is transferred back to the imidazole nitrogen to form the product. The alternative thiyl radical attack mechanism has a very high barrier, being 25.8 kcal/mol, ruling out this possibility.

Oxygen activation by mononuclear nonheme iron dioxygenases involved in the degradation of aromatics

Molecular oxygen is utilized in numerous metabolic pathways fundamental for life. Mononuclear nonheme iron-dependent oxygenase enzymes are well known for their involvement in some of these pathways, activating O₂ so that oxygen atoms can be incorporated into their primary substrates. These reactions often initiate pathways that allow organisms to use stable organic molecules as sources of carbon and energy for growth. From the myriad of reactions in which these enzymes are involved, this perspective recounts the general mechanisms of aromatic dihydroxylation and oxidative ring cleavage, both of which are ubiquitous chemical reactions found in life-sustaining processes. The organic substrate provides all four electrons required for oxygen activation and insertion in the reactions mediated by extradiol and intradiol ring-cleaving catechol dioxygenases. In contrast, two of the electrons are provided by NADH in the cis-dihydroxylation mechanism of Rieske dioxygenases. The catalytic nonheme Fe center, with the aid of active site residues, facilitates these electron transfers to O₂ as key elements of the activation processes. This review discusses some general questions for the catalytic strategies of oxygen activation and insertion into aromatic compounds employed by mononuclear nonheme iron-dependent dioxygenases. These include: (1) how oxygen is activated, (2) whether there are common intermediates before oxygen transfer to the aromatic substrate, and (3) are these key intermediates unique to mononuclear nonheme iron dioxygenases?

Theoretical investigation on proton transfer mechanism of extradiol dioxygenase

The formation mechanism of alkyl(hydro)peroxo species is performed via two parallel pathways.

Oxygen activation by mononuclear Mn, Co, and Ni centers in biology and synthetic complexes

The active sites of metalloenzymes that catalyze O₂-dependent reactions generally contain iron or copper ions. However, several enzymes are capable of activating O₂ at manganese or nickel centers instead, and a handful of dioxygenases exhibit activity when substituted with cobalt. This minireview summarizes the catalytic properties of oxygenases and oxidases with mononuclear Mn, Co, or Ni active sites, including oxalate-degrading oxidases, catechol dioxygenases, and quercetin dioxygenase. In addition, recent developments in the O₂ reactivity of synthetic Mn, Co, or Ni complexes are described, with an emphasis on the nature of reactive intermediates featuring superoxo-, peroxo-, or oxo-ligands. Collectively, the biochemical and synthetic studies discussed herein reveal the possibilities and limitations of O₂ activation at these three "overlooked" metals.

O2 Activation by Non-Heme Iron Enzymes

The non-heme Fe enzymes are ubiquitous in nature and perform a wide range of functions involving O₂ activation. These had been difficult to study relative to heme enzymes; however, spectroscopic methods that provide significant insight into the correlation of structure with function have now been developed. This Current Topics article summarizes both the molecular mechanism these enzymes use to control O₂ activation in the presence of cosubstrates and the oxygen intermediates these reactions generate. Three types of O₂ activation are observed. First, non-heme reactivity is shown to be different from heme chemistry where a low-spin Fe^III-OOH non-heme intermediate directly reacts with substrate. Also, two subclasses of non-heme Fe enzymes generate high-spin Fe^IV═O intermediates that provide both σ and π frontier molecular orbitals that can control selectivity. Finally, for several subclasses of non-heme Fe enzymes, binding of the substrate to the Fe^II site leads to the one-electron reductive activation of O₂ to an Fe^III-superoxide capable of H atom abstraction and electrophilic attack.

Spectroscopic Evidence for the Two C-H-Cleaving Intermediates of Aspergillus nidulans Isopenicillin N Synthase

The enzyme isopenicillin N synthase (IPNS) installs the β-lactam and thiazolidine rings of the penicillin core into the linear tripeptide l-δ-aminoadipoyl-l-Cys-d-Val (ACV) on the pathways to a number of important antibacterial drugs. A classic set of enzymological and crystallographic studies by Baldwin and co-workers established that this overall four-electron oxidation occurs by a sequence of two oxidative cyclizations, with the β-lactam ring being installed first and the thiazolidine ring second. Each phase requires cleavage of an aliphatic C-H bond of the substrate: the pro-S-CCys,β-H bond for closure of the β-lactam ring, and the CVal,β-H bond for installation of the thiazolidine ring. IPNS uses a mononuclear non-heme-iron(II) cofactor and dioxygen as cosubstrate to cleave these C-H bonds and direct the ring closures. Despite the intense scrutiny to which the enzyme has been subjected, the identities of the oxidized iron intermediates that cleave the C-H bonds have been addressed only computationally; no experimental insight into their geometric or electronic structures has been reported. In this work, we have employed a combination of transient-state-kinetic and spectroscopic methods, together with the specifically deuterium-labeled substrates, A[d2-C]V and AC[d8-V], to identify both C-H-cleaving intermediates. The results show that they are high-spin Fe(III)-superoxo and high-spin Fe(IV)-oxo complexes, respectively, in agreement with published mechanistic proposals derived computationally from Baldwin's founding work.

Insights into the Reaction Mechanism of Aromatic Ring Cleavage by Homogentisate Dioxygenase: A Quantum Mechanical/Molecular Mechanical Study

To elucidate the reaction mechanism of the ring cleavage of homogentisate by homogentisate dioxygenase, quantum mechanical/molecular mechanical (QM/MM) calculations were carried out by using two systems in different protonation states of the substrate C2 hydroxyl group. When the substrate C2 hydroxyl group is ionized (the ionized pathway), the superoxo attack on the substrate is the rate-limiting step in the catalytic cycle, with a barrier of 15.9 kcal/mol. Glu396 was found to play an important role in stabilizing the bridge species and its O-O cleavage product by donating a proton via a hydrogen-bonded water molecule. When the substrate C2 hydroxyl group is not ionized (the nonionized pathway), the O-O bond cleavage of the bridge species is the rate-limiting step, with a barrier of 15.3 kcal/mol. The QM/MM-optimized geometries for the dioxygen and alkylperoxo complexes using the nonionized model (for the C2 hydroxyl group) are in agreement with the experimental crystal structures, suggesting that the C2 hydroxyl group is more likely to be nonionized.

Unravelling the Molecular Origin of the Regiospecificity in Extradiol Catechol Dioxygenases

Many factors have been suggested to control the selectivity for extradiol or intradiol cleavage in catechol dioxygenases. The varied selectivity of model complexes and the ability to force an extradiol enzyme to do intradiol cleavage indicate that the problem may be complex. In this paper we focus on the regiospecificity of the proximal extradiol dioxygenase, homoprotocatechuate 2,3-dioxygenase (HPCD), for which considerable advances have been made in our understanding of the mechanism from an experimental and computational standpoint. Two key steps in the reaction mechanism were investigated: (1) attack of the substrate by the superoxide moiety and (2) attack of the substrate by the oxyl radical generated by O-O bond cleavage. The selectivity at both steps was investigated through a systematic study of the role of the substrate and the first and second coordination spheres. For the isolated native substrate, intradiol cleavage is calculated to be both kinetically and thermodynamically favored, therefore nature must use the enzyme environment to reverse this preference. Two second sphere residues were found to play key roles in controlling the regiospecificity of the reaction: Tyr257 and His200. Tyr257 controls the selectivity by modulating the electronic structure of the substrate, while His200 controls selectivity through steric effects and by preventing alternative pathways to intradiol cleavage.

A Long-Lived Fe(III)-(Hydroperoxo) Intermediate in the Active H200C Variant of Homoprotocatechuate 2,3-Dioxygenase: Characterization by Mössbauer, Electron Paramagnetic Resonance, and Density Functional Theory Methods

The extradiol-cleaving dioxygenase homoprotocatechuate 2,3-dioxygenase (HPCD) binds substrate homoprotocatechuate (HPCA) and O2 sequentially in adjacent ligand sites of the active site Fe(II). Kinetic and spectroscopic studies of HPCD have elucidated catalytic roles of several active site residues, including the crucial acid-base chemistry of His200. In the present study, reaction of the His200Cys (H200C) variant with native substrate HPCA resulted in a decrease in both kcat and the rate constants for the activation steps following O2 binding by >400 fold. The reaction proceeds to form the correct extradiol product. This slow reaction allowed a long-lived (t1/2 = 1.5 min) intermediate, H200C-HPCAInt1 (Int1), to be trapped. Mössbauer and parallel mode electron paramagnetic resonance (EPR) studies show that Int1 contains an S1 = 5/2 Fe(III) center coupled to an SR = 1/2 radical to give a ground state with total spin S = 2 (J > 40 cm(-1)) in Hexch = JŜ1·ŜR. Density functional theory (DFT) property calculations for structural models suggest that Int1 is a (HPCA semiquinone(•))Fe(III)(OOH) complex, in which OOH is protonated at the distal O and the substrate hydroxyls are deprotonated. By combining Mössbauer and EPR data of Int1 with DFT calculations, the orientations of the principal axes of the (57)Fe electric field gradient and the zero-field splitting tensors (D = 1.6 cm(-1), E/D = 0.05) were determined. This information was used to predict hyperfine splittings from bound (17)OOH. DFT reactivity analysis suggests that Int1 can evolve from a ferromagnetically coupled Fe(III)-superoxo precursor by an inner-sphere proton-coupled-electron-transfer process. Our spectroscopic and DFT results suggest that a ferric hydroperoxo species is capable of extradiol catalysis.

Structural Basis for Substrate and Oxygen Activation in Homoprotocatechuate 2,3-Dioxygenase: Roles of Conserved Active Site Histidine 200

Kinetic and spectroscopic studies have shown that the conserved active site residue His200 of the extradiol ring-cleaving homoprotocatechuate 2,3-dioxygenase (FeHPCD) from Brevibacterium fuscum is critical for efficient catalysis. The roles played by this residue are probed here by analysis of the steady-state kinetics, pH dependence, and X-ray crystal structures of the FeHPCD position 200 variants His200Asn, His200Gln, and His200Glu alone and in complex with three catecholic substrates (homoprotocatechuate, 4-sulfonylcatechol, and 4-nitrocatechol) possessing substituents with different inductive capacity. Structures determined at 1.35-1.75 Å resolution show that there is essentially no change in overall active site architecture or substrate binding mode for these variants when compared to the structures of the wild-type enzyme and its analogous complexes. This shows that the maximal 50-fold decrease in kcat for ring cleavage, the dramatic changes in pH dependence, and the switch from ring cleavage to ring oxidation of 4-nitrocatechol by the FeHPCD variants can be attributed specifically to the properties of the altered second-sphere residue and the substrate. The results suggest that proton transfer is necessary for catalysis, and that it occurs most efficiently when the substrate provides the proton and His200 serves as a catalyst. However, in the absence of an available substrate proton, a defined proton-transfer pathway in the protein can be utilized. Changes in the steric bulk and charge of the residue at position 200 appear to be capable of altering the rate-limiting step in catalysis and, perhaps, the nature of the reactive species.

Transition metal complexes and the activation of dioxygen

In order to address how diverse metalloprotein active sites, in particular those containing iron and copper, guide O₂binding and activation processes to perform diverse functions, studies of synthetic models of the active sites have been performed. These studies have led to deep, fundamental chemical insights into how O₂coordinates to mono- and multinuclear Fe and Cu centers and is reduced to superoxo, peroxo, hydroperoxo, and, after O-O bond scission, oxo species relevant to proposed intermediates in catalysis. Recent advances in understanding the various factors that influence the course of O₂activation by Fe and Cu complexes are surveyed, with an emphasis on evaluating the structure, bonding, and reactivity of intermediates involved. The discussion is guided by an overarching mechanistic paradigm, with differences in detail due to the involvement of disparate metal ions, nuclearities, geometries, and supporting ligands providing a rich tapestry of reaction pathways by which O₂is activated at Fe and Cu sites.