Label-free electrochemical cancer cell detection leveraging hemoglobin-encapsulated silver nanoclusters and Cu-MOF nanohybrids on a graphene-assisted dual-modal probe

Breast cancer detection at an early stage significantly increases the chances of successful treatment and survival. This study presents an electrochemical biosensor for detecting breast cancer cells, utilizing silver nanoclusters encapsulated by hemoglobin and Cu (II)-porphyrin-metal organic framework (BioMOF) in a graphene-incorporated nanohybrid probe. This Hb-AgNCs@MOF-G probe demonstrates high electrochemical activity, superior dispersity, porosity, and a large surface area for effective functionalization. Using a green ultrasonic-assisted stirring method, we fabricate ultra-small 5 nm particles that readily immobilize on a glassy carbon electrode, generating a detection signal when interacting with ferricyanide/ferrocyanide redox probes. The resulting immunosensor detects as few as 2 cells/mL using Electrochemical Impedance Spectroscopy (EIS) "signal on" and 16 cells/mL via Square Wave Voltammetry (SWV) "signal off", within a broad range of cell concentrations (102-5 × 104 cells/mL). Our designed sensor shows improved selectivity (5- to 16-fold) and robust detection in human blood with a recovery efficiency between 94.8-106% (EIS method) and 95.4-111% (SWV method). This sensor could streamline early cancer diagnosis and monitor patient treatment without requiring labelling or signal amplification. As a pioneering endeavor, we've utilized integrated porous MOFs with Hb-encapsulated silver nanoclusters in cancer detection, where these components collectively enhance the overall functionality.

Synthesis of biocompatible, BSA capped fluorescent CaCO3 pre-nucleation nanoclusters for cell imaging applications

Novel, photostable, multicolour fluorescent, highly biocompatible, water soluble, BSA capped pre-nucleation CaCO3 nanoclusters (FCPN) (∼1.3 nm) are developed using a facile biomineralization process. M. oleifera leaf extract and BSA protein are used as sources of ascorbic acid and capping agent, respectively. The developed FCPN shows fluorescence in the blue, green, and yellow/red region with an average life time of 1.05, 6.23 and 30.60 ns, respectively. The MALDI-MS measurements reveal that these nanoclusters are 16, 50, 73, 222 and 936 molecules big. These FCPN, when incubated (up to 7 days) with MG-63 cells, demonstrate an increase in cell viability percentage with time period as compared to their control samples. Furthermore, these incubated cells were investigated using confocal microscopy to estimate the FCPN diffusion penetration depth using CTCF analysis. It has been observed that blue and green emitting FCPN penetrated 6 μm, whereas red emitting FCPN traversed only 4 μm. The relative quantum yield (Rhodamine 6G = 0.92) of FCPN for green emission was found to be 0.0175 in water. The prepared nanoclusters displayed four months shelf-life. These FCPN were prepared using an environmentally benign, inexpensive, green synthetic route without using toxic reducing agents. Furthermore, the current report discusses the detailed results, obtained from X-ray photoelectron spectroscopy, MALDI-MS, Fourier transform infrared spectroscopy, UV-visible, fluorescence spectroscopy, lifetime measurements, electron microscopy, fluorescence microscopy and confocal microscopy.

Nanostructures in Hydrogen Peroxide Sensing

In recent years, several devices have been developed for the direct measurement of hydrogen peroxide (H2O2), a key compound in biological processes and an important chemical reagent in industrial applications. Classical enzymatic biosensors for H2O2 have been recently outclassed by electrochemical sensors that take advantage of material properties in the nano range. Electrodes with metal nanoparticles (NPs) such as Pt, Au, Pd and Ag have been widely used, often in combination with organic and inorganic molecules to improve the sensing capabilities. In this review, we present an overview of nanomaterials, molecules, polymers, and transduction methods used in the optimization of electrochemical sensors for H2O2 sensing. The different devices are compared on the basis of the sensitivity values, the limit of detection (LOD) and the linear range of application reported in the literature. The review aims to provide an overview of the advantages associated with different nanostructures to assess which one best suits a target application.

Dual role of BSA for synthesis of MnO2 nanoparticles and their mediated fluorescent turn-on probe for glutathione determination and cancer cell recognition

A MnO₂ nanoparticle (MnO₂ NP)-mediated fluorescent turn-on probe for sensitively and selectively detecting glutathione (GSH) and recognizing cancer cells was established in this work. MnO₂ NPs were synthesized simply and quickly through an in situ redox reaction by mixing bovine serum albumin (BSA) and KMnO₄, in which BSA served the dual roles of template and reductant. It was found that the MnO₂ NPs served as an effective energy acceptor and quenched the fluorescence intensity of carbon dots (CDs), owing to the fluorescence resonance energy transfer (FRET) process. Further, the addition of GSH triggered the decomposition of MnO₂, breaking the FRET between MnO₂ NPs and CDs and thus restoring the fluorescence intensity of CDs. Based on this mechanism, quantitative determination of GSH was performed. Under optimal conditions, a satisfactory linear range of 0.05-90 μM and limit of detection of 39 nM were obtained, and GSH content in human serum samples was detected. Moreover, taking advantage of the higher levels of GSH in cancer cells than in normal cells, the MnO₂ NP-CD probe was applied to distinguish SMMC-7721 cancer cells from L02 normal cells. The FRET was interrupted by GSH in cancer cells, and strong fluorescence was observed. This work provides a facile approach for synthesizing MnO₂ NPs, and this rapid, low-cost method with no need for reductants makes synthesis green and convenient. The MnO₂ NP-mediated fluorescent turn-on response to GSH could improve the MnO₂ nanomaterial-based biochemical analysis applications.

Electrochemical Sensing of Hydrogen Peroxide Using Block Copolymer Templated Iron Oxide Nanopatterns

A new enzyme-free sensor based on iron oxide (Fe₃O₄) nanodots fabricated on an indium tin oxide (ITO) substrate via a block copolymer template was developed for highly sensitive and selective detection of hydrogen peroxide (H₂O₂). The self-assembly-based process described here for Fe₃O₄ formation is a simple, cost-effective, and reproducible process. The H₂O₂ response of the fabricated electrodes was linear from 2.5 × 10^-3 to 6.5 mM with a sensitivity of 191.6 μA mM^-1cm^-2 and a detection limit of 1.1 × 10^-3 mM. The electrocatalytic activity of Fe₃O₄ nanodots toward the electroreduction of H₂O₂ was described by cyclic voltammetric and amperometric techniques. The sensor described here has a strong anti-interference ability to a variety of common biological and inorganic substances.

Ultrasensitive electrospun fluorescent nanofibrous membrane for rapid visual colorimetric detection of H2O2

We report herein a flexible fluorescent nanofibrous membrane (FNFM) prepared by decorating the gold nanocluster (AuNC) on electrospun polysulfone nanofibrous membrane for rapid visual colorimetric detection of H2O2. The provision of AuNC coupled to NFM has proven to be advantageous for facile and quick visualization of the obtained results, permitting instant, selective, and on-site detection. We strongly suggest that the fast response time is ascribed to the enhanced probabilities of interaction with AuNC located at the surface of NF. It has been observed that the color change from red to blue is dependent on the concentration, which is exclusively selective for hydrogen peroxide. The detection limit has been found to be 500 nM using confocal laser scanning microscope (CLSM), visually recognizable with good accuracy and stability. A systematic comparison was performed between the sensing performance of FNFM and AuNC solution. The underlying sensing mechanism is demonstrated using UV spectra, transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS). The corresponding disappearance of the characteristic emissions of gold nanoclusters and the emergence of a localized surface plasmon resonance (LSPR) band, stressing this unique characteristic of gold nanoparticles. Hence, it is evident that the conversion of nanoparticles from nanoclusters has taken place in the presence of H2O2. Our work here has paved a new path for the detection of bioanalytes, highlighting the merits of rapid readout, sensitivity, and user-friendliness.

A recyclable chitosan-based QCM biosensor for sensitive and selective detection of breast cancer cells in real time

A highly sensitive and recyclable quartz crystal microbalance (QCM) biosensor was developed using chitosan (CS) and folic acid (FA), generating conjugates that are selectively recognized by MCF-7 cancer cell over-expressed folic acid receptors. The prepared CS-FA conjugate was characterized by UV-vis spectroscopy and Fourier transform infrared spectroscopy. Atomic force microscopy and scanning electron microscopy further presented the morphology of the CS-FA conjugate interface. The hydrophilicity of films was characterized by measuring the contact angle. The recognition of MCF-7 cancer cells was investigated in situ using QCM. Captured by FA, the concentration of the MCF-7 cell was determined on-line using a quartz crystal microbalance and a wide linear range of 4.5 × 10(2) to 1.01 × 10(5) cells per mL was obtained, with a detection limit of 430 cells per mL. The fluorescence microscope further confirmed the specificity and biocompatibility of the constructed biosensor. In addition, the regeneration of the QCM biosensor was studied by using lysozyme. This receptor-bound ligand based QCM biosensor also showed good selectivity, and repeatability in the cell mixture. For the first time, this simple, economical and label-free chitosan-based QCM sensing was demonstrated, and such design could provide a promising detection strategy for sensitive detection of cancer cell over-expressed folic acid receptors.

Design and preparation of a non-enzymatic hydrogen peroxide sensor based on a novel rigid chain liquid crystalline polymer/reduced graphene oxide composite

A novel non-enzymatic hydrogen peroxide (H₂O₂) sensor was developed using a rigid chain liquid crystalline (LC) polymer with ferrocenyl as the side group and reduced graphene oxide (rGO) composite.

A novel electrochemical hydrogen peroxide biosensor based on hemoglobin capped gold nanoclusters–chitosan composite

In this work, the first direct electrochemistry of Hb-AuNCs and its electrocatalysis towards H₂O₂ in a biosensing system has been reported.

Biocatalytic etching of semiconductor cadmium sulfide nanoparticles as a new platform for the optical detection of analytes

The enzymatic etching of cadmium sulfide nanoparticles catalyzed by horseradish peroxidase leads to a decrease in the intensity of fluorescence.

Leaf-templated synthesis of 3D hierarchical porous cobalt oxide nanostructure as direct electrochemical biosensing interface with enhanced electrocatalysis

A novel three-dimensional (3D) hierarchical porous cobalt oxide (Co3O4) architecture was first synthesized through a simple, cost-effective and environmentally friendly leaf-templated strategy. The Co3O4 nanoparticles (30-100 nm) with irregular shapes were interconnected with each other to form a 3D multilayer porous network structure, which provided high specific surface area and numerous electrocatalytic active sites. Subsequently, Co3O4 was successfully utilized as direct electrochemical sensing interface for non-enzymatic detection of H2O2 and glucose. By using chronoamperometry, the current response of the sensor at +0.31 V was linear with H2O2 concentration within 0.4-200 μM with a low limit of detection (LOD) of 0.24 μM (S/N=3) and a high sensitivity of 389.7 μA mM(-1) cm(-2). Two linear ranges of 1-300 μM (with LOD of 0.1 μM and sensitivity of 471.5 μA mM(-1) cm(-2)) and 4-12.5 mM were found at +0.59 V for glucose. In addition, the as-prepared sensor showed excellent stability and anti-interference performance for possible interferents such as ascorbic acid, uric acid, dopamine, acetaminophen and especially 0.15 M chloride ions. Similarly, other various metal oxide nanostructures may be also prepared using this similar strategy for possible applications in catalysis, electrochemical sensors, and fuel cells.

Enzyme-labeled Pt@BSA nanocomposite as a facile electrochemical biosensing interface for sensitive glucose determination

Electrocatalytic reactions of glucose oxidation based on enzyme-labeled electrochemical biosensors demand a high enzymatic activity and fast electron transfer property to produce the amplified signal response. Through a "green" synthesis method, Pt@BSA nanocomposite was prepared as a biosensing interface for the first time. Herein we presented a convenient and effective glucose sensing matrix based on Pt@BSA nanocomposite along with the covalent adsorption of glucose oxidase (GOD). The electrocatalytic activity toward oxygen reduction was significantly enhanced due to the excellent bioactivity of anchored GOD and superior catalytic performance of interior platinum nanoparticles, which was gradually restrained with the addition of glucose. A sensitive glucose biosensor was then successfully developed upon the restrained oxygen reduction peak current. Differential pulse voltammetry (DPV) was employed to investigate the determination performance of the enzyme biosensor, resulting in a linear response range from 0.05 to 12.05 mM with an optimal detection limit of 0.015 mM. The as-proposed sensing technique revealed high selectivity against endogenous interfering species, satisfactory storage stability, acceptable durability, and favorable fabrication reproducibility with the RSD of 3.8%. During the practical application in human blood serum samples, this glucose biosensor obtained a good detection accuracy of analytical recoveries within 97.5 to 104.0%, providing an alternative scheme for glucose level assay in clinical application.