Rational design of a FA1-targeting anti-interference fluorescent probe for the point-of-care testing of albuminuria

Albuminuria is a crucial urine biomarker of human unhealthy events such as kidney diseases, cardiovascular diseases, and diabetes. However, the accurate diagnosis of albuminuria poses a significant challenge owing to the severe interference from urine fluorescence and urine drugs. Here, we report a novel flavone-based fluorescent probe, DMC, by incorporating the FA1-targeting methylquinazoline group into a flavone skeleton with the extend π-conjugation. DMC exhibited a rapid response time, high sensitivity, and selectivity towards human serum albumin (HSA) in urine. Moreover, the red-shifted fluorescence and the FA1-targeted HSA-binding of DMC efficiently mitigated the interference from both urine fluorescence and urine drug metabolites. Furthermore, the establishment of a portable testing system highlighted the potential for point-of-care testing, offering a user-friendly and accurate approach to diagnose A2-level and A3-level albuminuria. We expect that the success of this DMC-based diagnostic platform in real urine samples can signify a significant advancement in early clinical diagnosis of albuminuria and its associated diseases.

HSA over BSA: Selective detection of Human Serum Albumin via a naphtho [2,1-b] furan-based system

Human serum albumin (HSA) is an important biomarker that can be used for the early diagnosis of many diseases. In this work, a TICT probe bearing fused naphtho-furan scaffold (NPNF) was developed and employed in the selective turn-on sensing of HSA. The probe's selectivity towards HSA was observed using steady-state fluorescence experiments, with limit of quantitation in micromolar levels. NPNF's capability to exclusively detect HSA over BSA was further studied/rationalized using anisotropy and time-resolved studies. Molecular docking was used to shed light on the location of NPNF in the subdomain IB of HSA. The practical application of the probe was also demonstrated by the detection of HSA in urine and the HSA-assisted detection of cerium.

Bioengineered cellulosic paper micro-device for serum albumin detection in clinical range

Chronic Kidney Disease (CKD) is becoming one of the major causes of morbidity and mortalities in 21st century. We have developed a bioengineered cellulosic paper device for the quantification of albumin (ALB) in physiological samples. The paper surface was activated and antibodies specific to target biomarker was immobilized on engineered paper surface. Every step after modification was characterized by FTIR, XPS, SPM and optical analysis. Further, the device model was designed using CAD file, and a 3-D cascade device was fabricated with in-built constant light source to provide proper and controlled environment for in-situ image analysis. After adding the sample on the bioengineered paper, the antigen-antibody reaction takes place, after that addition of dye results in change of color from yellow to blueish-green within 40 s. An optical method was employed for the analysis of the images by recognizing the specific area and the color intensity. Additionally, the immunosensor specificity was evaluated on number of molecules that are usually found in the serum sample. The linear dynamic range of the developed immunosensor has been reported to be 1-60 mg/mL, covering the normal as well as clinical range of ALB in physiological samples with a detection limit of 0.049(±0.002) mg/mL. With good precision and recovery, the device was able to successfully determine the ALB concentrations in serum sample. The developed device has simple and user-friendly interface and it may also help diagnosing CKD in personalized settings.

Screen‐printed electrochemical sensors for label‐free potentiometric and impedimetric detection of human serum albumin

Herein, two electrochemical methods based on potentiometric and impedimetric transductions were presented for albumin targeting, employing screen‐printed platforms (SPEs) to make easy and cost‐effective sensors with good detection merits. The SPEs incorporated ion‐to‐electron multi‐walled carbon nanotubes (MWCNTs) transducer. Sensors were constructed using either tridodecyl methyl‐ammonium chloride (TDMACl) (sensor I) or aliquate 336S (sensor II) in plasticized polymeric matrices of carboxylated poly (vinyl chloride) (PVC‐COOH). Analytical performances of the sensors were evaluated using the above‐mentioned electrochemical techniques. For potentiometric assay, constructed sensors responded to albumin with −81.7 ± 1.7 (r2 = 0.9986) and −146.2 ± 2.3 mV/decade (r2 = 0.9991) slopes over the linearity range 1.5 μM–1.5 mM with 0.8 and 1.0 μM detection limits for respective TDMAC‐ and aliquate‐based sensors. Interference study showed apparent selectivity for both sensors. Impedimetric assays were performed at pH = 7.5 in 10 mM PBS buffer solution with a 0.02 M [Fe(CN)6]−3/−4 redox‐active electrolyte. Sensors achieved detection limits of 4.3 × 10−8 and 1.8 × 10−7 M over the linear ranges of 5.2×10−8–1.0×10−4 M and 1.4×10−6–1.4×10−3 M, with 0.09 ± 0.004 and 0.168 ± 0.009 log Ω/decade slopes for sensors based on TDMAC and aliquate, respectively. These sensors are characterized with simple construction, high sensitivity and selectivity, fast response time, single‐use, and cost‐effectiveness. The methods were successfully applied to albumin assessment in different biological fluids.

Chiral 8-aminoBODIPY-based fluorescent probes with site selectivity for the quantitative detection of HSA in biological samples

Human serum albumin (HSA) is one of the vital proteins in blood serum, and its optimum level is a reflection of the physiological well-being of an individual. Any abnormalities in serum HSA levels could often be a sign of disguised physiological disorders. The importance of fast and accurate determination of serum HSA levels has led to the development of various quantification methods. Among these, fluorescence-based methods employ molecular probes capable of producing selective responses on interaction with HSA. Herein, we report chiral 8-aminoBODIPY-based probes having blue emission for the quantitative detection of HSA in buffer and human blood serum. A pair of 8-aminoBODIPY enantiomers, namely R-PEB and S-PEB, were synthesized. They exhibited a fast 'turn-on' fluorescence response towards HSA, allowing its detection and quantification. In PBS buffer, R-PEB and S-PEB showed very good sensitivity with a limit of detection (LoD) of 25 nM (K_D = 9.84 ± 0.14 μM) and 39 nM (K_D = 18.67 ± 0.21 μM), respectively. The linear relationship observed between the fluorescence intensity of R-PEB/S-PEB and the HSA concentration in serum samples allowed us to generate a reference curve for HSA estimation for practical applications. Examination of unknown serum samples showed a good correlation with the results obtained by the benchmark BCG method. Interestingly, the difference in these probes' dissociation constants and LoD indicated their differential binding to HSA. Considering the availability of multiple ligand binding sites in HSA, their binding preferences were investigated in detail by displacement assays using site-specific drugs. These studies showed the preferential affinity of R-PEB towards site II, which was further substantiated using molecular docking studies. However, these displacement assays could not identify the preferred binding site of S-PEB. Blind docking studies indicated that S-PEB occupied a site closer to FA5. Selective binding of R-PEB to site II and its characteristic photophysical response can be utilized to quickly screen potential site II binding drugs.

Modulating donor of dicyanoisophorone-based fluorophores to detect human serum albumin with NIR fluorescence

It is urgently needed to develop NIR-fluorescent probe for detection of human serum albumin (HSA) since the interference of short-wavelength-fluorescence from endogenous species in real serum and urine. However, most previous reports were located in the short-wavelength region (<600 nm). In this work, a series of dicyanoisophorone (DCO)-based fluorophores 1-4 with different donor groups have been designed and investigated. A systematic study of their photophysical properties has been carried out. Among these probes, 4 exhibited NIR emission with the highest fluorescence brightness and the most sensitive signal response to HSA. Further studies demonstrated that 4 could strongly bind into the DS1 pocket of HSA with a 1:1 ratio. Importantly, the method based on 4 has been proven to be capable of sensing HSA in real serum and urine samples.

Detection Methods and Research Progress of Human Serum Albumin

Human serum albumin (HSA) is a biological macromolecule with important physiological functions; abnormal HSA levels are associated with coronary heart disease, multiple myeloma, diabetes, nephropathy, neurometabolic disorders, liver cirrhosis and other diseases. Therefore, accurate and quantitative detection of HAS have extremely important research and application value in biological science, molecular biology, clinical medicine and other fields. As for the detection method of HSA, dye-binding method and immune method are the first to be used, and have been applied in clinical detection. In recent years, many new detection technologies have emerged, such as fluorescent probe detection method, nano-materials for HSA detection, biosensor and so on. Although there are many methods developed recently to detect HSA, comprehensive reviews for HSA detection methods are still rare. Thus, writing this review to fill in the blank is in need. In order to highlight the recent progress in the field of HSA detection, in this review, the methods used to detect HSA are summarized and sorted, the advantages and disadvantages of these detection methods are also listed, then the research progress of small molecular fluorescence probe method is emphatically introduced in this paper. Then, we briefly discussed the challenges and future development directions in this field.

Dual luminescent charge transfer probe for quantitative detection of serum albumin in aqueous samples

In diagnostic medicine serum albumin is considered as an important biomarker for assessment of cardiovascular functions and diagnosis of renal diseases. Herein, we report a novel donor-π-π-acceptor fluorophore for selective detection of serum albumin in urine samples. In our design, a phenolic donor was conjugated with a tricyanofuran (TCF) acceptor through a dimethine bridge via a simple condensation reaction. The stereoelectronic effects of the incorporated methoxy (-OCH3) groups and the TCF moiety-in conjunction with the extended π-electron conjugation-led to dual red and NIR-I absorption/emission in water. Moreover, due to superior electron transfer between a phenolate donor and the TCF acceptor and the subsequent energy decay from the charge transfer states, the fluorophore displayed negligible fluorescence emission in water and other polar solvents. Consequently, we have been able to utilize the fluorophore for quantitative estimation of serum albumin both in the red (<700 nm) and NIR-I (700-900 nm) regions of the electromagnetic spectrum with excellent reproducibility. The fluorophore selectively recognized human serum albumin over other proteins and enzymes with a limit of detection of 10 mg/L and 20 mg/L in simulated urine samples at red and NIR-I emission window of the spectrum, respectively. By molecular docking analysis and experimental displacement assays, we have shown that the selective response of the fluorophore toward human serum albumin is due to tighter supramolecular complexation between the fluorophore and the protein at subdomain IB, and the origin of the NIR-I (780 nm) emission was attributed to a twisted conformer of phenolate-π-π-TCF system in aqueous solution. These findings indicate that the fluorophore could be utilized for quantitative detection of human serum albumin in urine samples for clinical diagnosis of albuminuria.

A dual-mode fluorometric/colorimetric sensor for Cu2+ detection based on hybridized carbon dots and gold-silver core-shell nanoparticles

A fluorometric and colorimetric dual mode sensing platform based on hybridized carbon dots (Cdots) and gold-silver core-shell nanoparticles (Au@Ag NPs) has been established for the sensitive detection of trace Cu²⁺ ions in aqueous solution. In this system, the fluorescence of Cdots was quenched by Au@Ag NPs due to the surface plasmon-enhanced energy transfer. Due to the fact that Cu²⁺ could accelerate the etching process of Au@Ag NPs in the presence of thiosulfate, the fluorescence of Cdots was recovered. The limit of detection (LOD) is 4.81 nM for fluorometric measurements and 3.85 nM for colorimetric measurements. The dynamic range from these two modes is 0.005-1 μM. Importantly, Cu²⁺ in solution can also be directly visualized by this sensor via evident color change from the solution. Therefore, this dual mode nanosensor has potential applications for the efficient detection of Cu²⁺ ions in aqueous samples with great selectivity and high sensitivity.

Selective Detection of Human Serum Albumin by Near Infrared Emissive Fluorophores: Insights into Structure-property Relationship

Two donor-acceptor fluorophores were prepared and tested for quantitative determination of HSA in aqueous samples. Fluorophores were non-emissive in polar solvents due to energy loss via non-radiative decays. Complexation of the fluorophores with HSA resulted multi-fold enhancement of emission in the red-near infrared (NIR) region. The emission intensity was linearly correlated to the amount of protein in the solution, which enabled us to develop calibration graphs for quantitative estimation of HSA in synthetic urine samples. Between the two fluorophores, the methoxy substituted fluorophore 1 selectively recognized HSA. It exhibited remarkable fluorescence enhancement with HSA over bovine serum albumin (BSA) and other globular proteins. The selective sensing aptitude of 1 was attributed to its restricted motions in the protein's microenvironment due to multiple non-covalent interactions, preventing energy loss by radiationless decay. The different recognition properties of the fluorophores were estimated by the steady-state fluorescence and molecular docking studies. These findings indicate that this class of fluorophores can be useful for quantitative estimation of HSA in biological urine and blood samples in clinical practice.

Aggregation-Enhanced Emission of Gold Nanoclusters Induced by Serum Albumin and Its Application to Protein Detection and Fabrication of Molecular Logic Gates

Exploring aggregation-enhanced emission (AEE) of gold nanoclusters (Au NCs) is beneficial for extending their applications in sensing and molecular information processing. Herein, we present the first report of a protein-induced AEE effect of Au NCs. When human serum albumin (HSA) is mixed with glutathione-capped Au NCs under appropriate pH conditions, the Au NCs undergo extensive aggregation and exhibit significantly enhanced emission, attributed to the electrostatic and hydrophobic interactions between HSA and the NCs. Such an AEE effect is specific to serum albumin over a variety of other proteins, which facilitates the development of a facile approach for HSA determination. This sensing method displays satisfactory recoveries of 96.0-98.7% when it is applied to HSA detection in artificial urine. Moreover, the AEE effect is suited to the fabrication of AND and INHIBIT logic gates by using HSA and pH/protein-binding drug as inputs and the emission as output.

Reversible regulation of the supramolecular chirality of a cyanine dye by using the G-quadruplex structure as a template

Multiple cycle regulation of the supramolecular chirality of a cyanine dye has been successfully achieved by using DNA G-quadruplexes as templates, which is easily controllable by repeated addition of Ag(+) and cysteine (Cys). This work provides an easy and controllable strategy for the chiral regulation of supramolecules.

A Novel Detection Method of Human Serum Albumin Based on the Poly(Thymine)-Templated Copper Nanoparticles

In this work, we developed a facile fluorescence method for quantitative detection of human serum albumin (HSA) based on the inhibition of poly(thymine) (poly T)-templated copper nanoparticles (CuNPs) in the presence of HSA. Under normal circumstances, poly T-templated CuNPs can display strong fluorescence with excitation/emission peaks at 340/610 nm. However, in the presence of HSA, it will absorb cupric ion, which will prevent the formation of CuNPs. As a result, the fluorescence intensity will become obviously lower in the presence of HSA. The analyte HSA concentration had a proportional linear relationship with the fluorescence intensity of CuNPs. The detection limit for HSA was 8.2 × 10⁻⁸ mol·L⁻¹. Furthermore, it was also successfully employed to determine HSA in biological samples. Thus, this method has potential applications in point-of-care medical diagnosis and biomedical research.

Specific identification of human transferrin conformations using a cyanine dye supramolecular assembly

A new method to recognize human transferrin open conformation (apo-Tf) was developed using cyanine dye (MTC) supramolecular assembly.

A colorimetric and fluorometric dual-modal DNA logic gate based on the response of a cyanine dye supramolecule to G-quadruplexes

The INHIBIT DNA logic gate with dual-modal outputs based on the response of MTC aggregates to G-quadruplexes.

Gold Nanoparticle-Based Facile Detection of Human Serum Albumin and Its Application as an INHIBIT Logic Gate

In this work, a facile colorimetric method is developed for quantitative detection of human serum albumin (HSA) based on the antiaggregation effect of gold nanoparticles (Au NPs) in the presence of HSA. The citrate-capped Au NPs undergo a color change from red to blue when melamine is added as a cross-linker to induce the aggregation of the NPs. Such an aggregation is efficiently suppressed upon the adsorption of HSA on the particle surface. This method provides the advantages of simplicity and cost-efficiency for quantitative detection of HSA with a detection limit of ∼1.4 nM by monitoring the colorimetric changes of the Au NPs with UV-vis spectroscopy. In addition, this approach shows good selectivity for HSA over various amino acids, peptides, and proteins and is qualified for detection of HSA in a biological sample. Such an antiaggregation effect can be further extended to fabricate an INHIBIT logic gate by using HSA and melamine as inputs and the color changes of Au NPs as outputs, which may have application potentials in point-of-care medical diagnosis.

Functional molecular lumino-materials to probe serum albumins: solid phase selective staining through noncovalent fluorescent labeling

Selective staining of human serum albumin protein in gel electrophoresis over wide range of other protein(s) is extremely important because it contains more than 60% volume of serum fluid in human body. Given the nonexistence of suitable dye materials for selective staining of serum albumins in gel electrophoresis, we report a new class of easy synthesizable and low molecular weight staining agents based on 3-amino-N-alkyl-carbazole scaffold for selective staining of serum albumins in solid phase. A detailed structure-efficiency relationship (SER) study enabled us to develop two such potent functional molecular probes which stain both human and bovine serum albumin selectively in gel electrophoresis in the presence of other proteins and enzymes. The present gel staining process was found to be very simple and less time-consuming as compared to the conventional coomassie blue staining which in turn makes these probes a new class of serum albumin-specific staining materials in proteome research. Moreover, these molecular lumino-materials can detect serum albumins at subnanomolar level in the presence of broad spectrum of other proteins/enzymes in aqueous buffer (99.9% water, pH = 7.3) keeping the protein secondary structure intact. Our experimental and the docking simulation results show that these probes bind preferentially at 'binding site I' of both the serum proteins.