Chemiluminescence assay for the sensitive detection of iodide based on extracting Hg2+ from a T-Hg(2+)-T complex

Label-free hairpin-like aptamer and EIS-based practical, biostable sensor for acetamiprid detection

Acetamiprid (ACE) is a kind of broad-spectrum pesticide that has potential health risk to human beings. Aptamers (Ap-DNA (1)) have a great potential as analytical tools for pesticide detection. In this work, a label-free electrochemical sensing assay for ACE determination is presented by electrochemical impedance spectroscopy (EIS). And the specific binding model between ACE and Ap-DNA (1) was further investigated for the first time. Circular dichroism (CD) spectroscopy and EIS demonstrated that the single strand AP-DNA (1) first formed a loosely secondary structure in Tris-HClO₄ (20 mM, pH = 7.4), and then transformed into a more stable hairpin-like structure when incubated in binding buffer (B-buffer). The formed stem-loop bulge provides the specific capturing sites for ACE, forming ACE/AP-DNA (1) complex, and induced the R_CT (charge transfer resistance) increase between the solution-based redox probe [Fe(CN)₆]^3−/4− and the electrode surface. The change of ΔR_CT (charge transfer resistance change, ΔR_CT = R_CT(after)-R_CT(before)) is positively related to the ACE level. As a result, the AP-DNA (1) biosensor showed a high sensitivity with the ACE concentration range spanning from 5 nM to 200 mM and a detection limit of 1 nM. The impedimetric AP-DNA (1) sensor also showed good selectivity to ACE over other selected pesticides and exhbited excellent performance in environmental water and orange juice samples analysis, with spiked recoveries in the range of 85.8% to 93.4% in lake water and 83.7% to 89.4% in orange juice. With good performance characteristics of practicality, sensitivity and selectivity, the AP-DNA (1) sensor holds a promising application for the on-site ACE detection.

Development of luminol-based chemiluminescence approach for ultrasensitive sensing of Hg(II) using povidone-I2 protected gold nanoparticles as an efficient coreactant

In this work, we fabricated gold nanoparticles (AuNPs) capped with both polyvinyl pyrrolidone (PVP) and iodine (I₂) to act as efficient chemiluminescent coreactants for luminol. AuNPs synthesis was based on the direct chemical reduction of Au³⁺ with NaBH₄ in the presence of PVP-I₂ complex. The successful synthesis of PVP-I₂@AuNPs was confirmed with scanning electron microscopy (SEM) and UV-vis spectrophotometry. Chemiluminescence (CL) intensity of luminol was greatly enhanced, upon its chemical reaction with chemisorbed I₂ on AuNPs surfaces owing to the excellent catalytic activity of AuNPs. The PVP-I₂@AuNPs/luminol CL sensing system was successfully applied for determination of Hg²⁺ ions and the results displayed linearity in a wide range from 0.5 to 2000 nM and an ultrasensitive response to 1.0 nM Hg²⁺. The detection limit of Hg²⁺ ions was 0.1 nM, which was 100 times lower than the limit value (10 nM) defined by the U.S. Environmental Protection Agency in drinkable water. This ultrasensitive luminogenic system for Hg²⁺ detection also exhibited excellent selectivity among 13 types of metals, suggesting that the luminol/PVP-I₂@AuNPs system is a promising sensor for real-time detection of Hg²⁺. Graphical abstract.

Practical aptamer-based assay of heavy metal mercury ion in contaminated environmental samples: convenience and sensitivity

Due to heavy metals' magnified pollution from their accumulation in the ecosystem, practical detection of ultra-low concentration of heavy metals in environmental sample is of great significance for environmental supervision and maintenance of people's health. Herein, a practical and sensitive assay of heavy metal mercury was developed by visually observing (or spectrum detecting) the change of cationic gold nanoparticles (AuNPs), which is directly caused by mercury ion induced hybridization between non-canonical base pairs. In this assay, signal probe's response was direct rather than the indirect salt induction, thus avoiding the defect of salt-induced indirect response. It makes the analysis more sensitive. The results showed that the response of 8.2 × 10^-8 M Hg²⁺ could be observed with naked eye and the detection limit of Hg²⁺ in spectrometric determination was 4.9 × 10^-11 M, which is more than one order of magnitude lower than that from indirect response pattern of signal probe. In addition, high specificity of the affinity chemistry for T-Hg-T renders the assay to be highly selective. Compared with the results of cold vapor atom adsorption spectroscopy (CVAAS), this analysis has good reliability for the detection of mercury. The results fully indicate that the developed assay is an ideal alternative for online detection of heavy metal mercury in environmental pollution samples.

Strategic Approaches for Highly Selective and Sensitive Detection of Hg2+ Ion Using Mass Sensitive Sensors

Here we present a quartz crystal microbalance (QCM) sensor for the highly selective and sensitive detection of Hg²⁺ ion, a toxic chemical species and a hazardous environmental contaminant. Hg²⁺ ion can be quantitatively measured based on changes in the resonance frequency of QCM following mass changes on the QCM sensor surface. The high selectivity for Hg²⁺ ion in this study can be obtained using a thymine-Hg²⁺-thymine pair, which is more stable than the adenine-thymine base pair in DNA. On the other hand, gold nanoparticles (AuNPs) and their size-enhancement techniques were used to amplify the QCM signals to increase the sensitivity for Hg²⁺ ion. With this strategic approach, the proposed QCM sensor can be used to quantitatively analyze Hg²⁺ ion with high selectivity and sensitivity. The detection limit was as low as 98.7 pM. The sensor failed to work with other metal ions at concentrations 1000-times higher than that of the Hg²⁺ ion. Finally, the recovery does not exceed 10% of the original value for the detection of Hg²⁺ ion in tap and bottled water. The results indicate acceptable accuracy and precision for practical applications.

A fast, highly sensitive and selective assay of iodide ions with single-stranded DNA-templated copper nanoparticles as a fluorescent probe for its application in Kunming mice samples

The development of fast, sensitive, selective and flexible methods for the detection of iodide is highly demanded and is of great significance. In this work, single-stranded DNA-templated copper nanoparticles (ssDNA-CuNPs) generated by sodium ascorbate reduction of Cu²⁺ along the single-stranded DNA of poly-T were utilized as a fluorescent probe for the determination of iodide ions (I^-). The detection scheme is based on the instant quenching of the fluorescence of ssDNA-CuNPs by iodide ions. I^- can be quantified in the concentration range from 0.050 to 40 μM and from 40 to 80 μM, and the limit of detection is as low as 15 nM. This method provides a simple and convenient strategy for the biochemical assay of I^-, which is also helpful for early diagnosis of related diseases. The establishment of a low cost and fast detection method would be particularly important in developing countries where medical supplies are lacking.

Chemiluminescence assay for detection of 2-hydroxyfluorene using the G-quadruplex DNAzyme-H2O2-luminol system

A chemiluminescence (CL) based assay is described for the determination of the environmental pollutant 2-hydroxyfluorene (2-HOFlu) which is found to inhibit the CL of a system composed of the G-quadruplex/hemin complex (a DNAzyme), H₂O₂, and luminol. The G-rich aptamer PW17 is transformed to a potassium(I)-stabilized G-quadruplex-hemin complex which displays peroxidase-like activity to catalyze the oxidation of luminol by H₂O₂ which is accompanied by strong blue CL emission. On addition of 2-HOFlu, it will participate in the G-quadruplex DNAzyme-mediated oxidation by H₂O₂. As a result, CL intensity is decreased. The difference in CL intensity (ΔI) before and after addition of 2-HOFlu serves as the signal for its quantitation. In water of pH 9.0, a linear relationship is found for the 1 nM to 1 μM concentration range, with a 0.2 nM detection limit. The assay is highly selective over other fluorene derivatives. It was successfully applied to the determination of 2-HOFlu in spiked lake water samples. The method is rapid, cost-effective and convenient. Conceivably, it has a wide scope in that it may be applied to other target pollutants for which G-quadruplexes are available. Graphical abstract A chemiluminescence (CL) assay is described for the determination of the environmental pollutant 2-hydroxyfluorene (2-HOFlu) based on the inhibition of the CL system composed of the G-quadruplex/hemin complex (a DNAzyme), H₂O₂, and luminol.

Switchable electrochemiluminescence aptasensor coupled with resonance energy transfer for selective attomolar detection of Hg2+ via CdTe@CdS/dendrimer probe and Au nanoparticle quencher

In the present study, an ultrasensitive electrochemiluminescence (ECL) aptasensing assay for selective detection of Hg²⁺ was designed. In this electrochemiluminescence resonance energy transfer (ECL-RET) approach, Fe₃O₄@SiO₂/dendrimers/QDs exhibited amplified ECL emissions (switch "on" state) and with the hybridization between T-rich ssDNA(S₁) immobilized on the Fe₃O₄@SiO₂/dendrimers/QDs and AuNPs modified with complementary aptamer (AuNPs-S₂), the ECL of QDs nanocomposites was efficiently quenched (switch "off" state). In the presence of Hg²⁺ ions, formation of strong and stable T-Hg²⁺-T complex led to the release of the AuNPs-S₂ from double-stranded DNA(dsDNA) and the recovery of the ECL signal of QDs (second signal switch "on" state). Under optimal conditions, Hg²⁺ can be detected in a wide linear range from 20aM to 2µM with a very low detection limit of 2aM. The proposed ECL aptasensor showed high selectivity for Hg²⁺ determination compared to other environmentally relevant metal ions at concentration ratio more than 1000 times. The aptasensor was used for detection Hg²⁺ ions from samples of tap waters, carp and saltwater fishes with satisfactory results. The aptasensor exhibited high sensitivity, wide linear response (11 orders of magnitude), excellent reproducibility and stability. The proposed aptasensor will be a promising candidate for facile and rapid determination of Hg^2＋in environmental and fishery samples.

Ratiometric fluorophore for quantification of iodide under physiological conditions: applications in urine analysis and live cell imaging

The ratio of fluorescence intensity of fluorophoreI_{395 nm}/I_{475 nm}vs.log [I⁻] undergoes linear change over a broad iodide concentration range of 10⁻⁹to 10⁻⁵M and finds application in urine analysis and live cell imaging.

Visual detection of mercury(ii) based on recognition of the G-quadruplex conformational transition by a cyanine dye supramolecule

Visual detection of mercury(ii) based on recognition of the G-quadruplex conformational transition by a cyanine dye supramolecule is reported.

Biomimetic nanopore for sensitive and selective detection of Hg(ii) in conjunction with single-walled carbon nanotubes

Through SWNTs, duplex DNA derived from folding of single-stranded DNA can be quantitated with Zr⁴⁺–PEI coated cone-shaped nanopore. With Hg²⁺ detection, sensitivity and selectivity based on this paradigm is guaranteed without probe immobilization.

G-quadruplexes as sensing probes

Guanine-rich sequences of DNA are able to create tetrastranded structures known as G-quadruplexes; they are formed by the stacking of planar G-quartets composed of four guanines paired by Hoogsteen hydrogen bonding. G-quadruplexes act as ligands for metal ions and aptamers for various molecules. Interestingly, the G-quadruplexes form a complex with anionic porphyrin hemin and exhibit peroxidase-like activity. This review focuses on overview of sensing techniques based on G-quadruplex complexes with anionic porphyrins for detection of various analytes, including metal ions such as K⁺, Ca²⁺, Ag⁺, Hg²⁺, Cu²⁺, Pb²⁺, Sr²⁺, organic molecules, nucleic acids, and proteins. Principles of G-quadruplex-based detection methods involve DNA conformational change caused by the presence of analyte which leads to a decrease or an increase in peroxidase activity, fluorescence, or electrochemical signal of the used probe. The advantages of various detection techniques are also discussed.