Improvement strategies for oil/water separation based on electrospun SiO2 nanofibers

Oil spills and oily effluents from industry and daily life pose a great threat to all organisms in the ecosystem, while aggravating the problem of water scarcity, which has developed into a global challenge. Therefore, the development of advanced materials and technologies for oil/water separation has become a focus of attention. One-dimensional (1D) SiO2 nanofibers (SNFs) have become one of the most widely used inorganic nanomaterials in the past due to their stable chemical properties, excellent biocompatibility, and high temperature resistance etc. Meanwhile, electrospinning technique, as an emerging technology for treating oil/water emulsions, electrospun SNFs on this basis also has a number of advantages such as adjustable wettability, diverse structure and good connectivity. This review provides a systematic overview of the research progress of electrospun SNFs in different aspects. In this review, we first introduce the basic principles of electrospun SNFs, then focus on the design structures of various SNFs, propose corresponding strategies for the property improvement of SNFs, also analyze and consider the applications of SNFs. Finally, the challenges faced by electrospun SNFs in the field of oil/water separation are analyzed, and the future directions of electrospun SNFs are summarized and prospected.

A prediction model for nanoparticle diffusion behavior in fibrous materials considering steric and hydrodynamic resistances

Precise prediction of the hindered diffusion behavior of electroneutral particles in fibrous media plays a critical role in the development of drugs, polymer membranes, and porous electrodes. However, the random microstructure and unknown coupling relationship of multiple resistance mechanisms lead to the lack of a universal prediction model. In this work, a dual-resistance model is proposed by reconstructed pore-scale simulations, which presents the coexistence of steric and hydrodynamic resistances in the multiplication form. The simulation results show that the relationship between steric resistance and structural parameters (porosity, fiber radius, and particle radius) is exponential, while that for hydrodynamic resistance is polynomial. The dominant diffusion resistance is found to change from hydrodynamic to steric resistance with a decrease in porosity. The fluorescent polystyrene microsphere diffusivity in a series of SiO₂ fibrous media is determined by single-particle tracking experiments, quantitatively confirming the dual-resistance model. The present model can be used for rapid diffusivity prediction and fibrous membrane and drug design.

From 1D Nanofibers to 3D Nanofibrous Aerogels: A Marvellous Evolution of Electrospun SiO2 Nanofibers for Emerging Applications

One-dimensional (1D) SiO₂ nanofibers (SNFs), one of the most popular inorganic nanomaterials, have aroused widespread attention because of their excellent chemical stability, as well as unique optical and thermal characteristics. Electrospinning is a straightforward and versatile method to prepare 1D SNFs with programmable structures, manageable dimensions, and modifiable properties, which hold great potential in many cutting-edge applications including aerospace, nanodevice, and energy. In this review, substantial advances in the structural design, controllable synthesis, and multifunctional applications of electrospun SNFs are highlighted. We begin with a brief introduction to the fundamental principles, available raw materials, and typical apparatus of electrospun SNFs. We then discuss the strategies for preparing SNFs with diverse structures in detail, especially stressing the newly emerging three-dimensional SiO₂ nanofibrous aerogels. We continue with focus on major breakthroughs about brittleness-to-flexibility transition of SNFs and the means to achieve their mechanical reinforcement. In addition, we showcase recent applications enabled by electrospun SNFs, with particular emphasis on physical protection, health care and water treatment. In the end, we summarize this review and provide some perspectives on the future development direction of electrospun SNFs.

Block Copolymer and Cellulose Templated Mesoporous TiO2-SiO2 Nanocomposite as Superior Photocatalyst

A dual soft-templating method was developed to produce highly crystalline and mesoporous TiO2-SiO2 nanocomposites. Pluronic F127 as the structure-directing agent and pure cellulose as the surface area modifier were used as the templating media. While Pluronic F127 served as the sacrificing media for generating a mesoporous structure in an acidic pH, cellulose templating helped to increase the specific surface area without affecting the mesoporosity of the TiO2-SiO2 nanostructures. Calcination at elevated temperature removed all the organics and formed pure inorganic TiO2-SiO2 composites as revealed by TGA and FTIR analyses. An optimum amount of SiO2 insertion in the TiO2 matrix increased the thermal stability of the crystalline anatase phase. BET surface area measurement along with low angle XRD revealed the formation of a mesoporous structure in the composites. The photocatalytic activity was evaluated by the degradation of Rhodamine B, Methylene Blue, and 4-Nitrophenol as the model pollutants under solar light irradiation, where the superior photo-degradation activity of Pluronic F127/cellulose templated TiO2-SiO2 was observed compared to pure Pluronic templated composite and commercial Evonik P25 TiO2. The higher photocatalytic activity was achieved due to the higher thermal stability of the nanocrystalline anatase phase, the mesoporosity, and the higher specific surface area.

Electrospun Metal Oxide Nanofibers and Their Conductometric Gas Sensor Application. Part 2: Gas Sensors and Their Advantages and Limitations

Electrospun metal oxide nanofibers, due to their unique structural and electrical properties, are now being considered as materials with great potential for gas sensor applications. This critical review attempts to assess the feasibility of these perspectives. This article discusses approaches to the manufacture of nanofiber-based gas sensors, as well as the results of analysis of the performances of these sensors. A detailed analysis of the disadvantages that can limit the use of electrospinning technology in the development of gas sensors is also presented in this article. It also proposes some approaches to solving problems that limit the use of nanofiber-based gas sensors. Finally, the summary provides an insight into the future prospects of electrospinning technology for the development of gas sensors aimed for the gas sensor market.

Li+ -Containing, Continuous Silica Nanofibers for High Li+ Conductivity in Composite Polymer Electrolyte

Solid-state electrolytes have recently attracted significant attention toward safe and high-energy lithium chemistries. In particular, polyethylene oxide (PEO)-based composite polymer electrolytes (CPEs) have shown outstanding mechanical flexibility and manufacturing feasibility. However, their limited ionic conductivity, poor electrochemical stability, and insufficient mechanical strength are yet to be addressed. In this work, a novel CPE supported by Li⁺ -containing SiO₂ nanofibers is developed. The nanofibers are obtained via sol-gel electrospinning, during which lithium sulfate is in situ introduced into the nanofibers. The uniform doping of Li₂ SO₄ in SiO₂ nanofibers increases the Li⁺ conductivity of SiO₂ , generates mesopores on the surface of SiO₂ nanofibers, and improves the wettability between SiO₂ and PEO. As a result, the obtained SiO₂ /Li₂ SO₄ /PEO CPE yields high Li⁺ conductivity (1.3 × 10^-4 S cm^-1 at 60 °C, ≈4.9 times the Li₂ SO₄ -free CPE) and electrochemical stability. Furthermore, the all-solid-state LiFePO₄ -Li full cell demonstrates stable cycling with high capacities (over 80 mAh g^-1 , 50 cycles at C/2 at 60 °C). The Li⁺ -containing mesoporous SiO₂ nanofibers show great potential as the filler for CPEs. Similar methods can be used to incorporate Li salts into other filler materials for CPEs.

Mesoporous WO3 Nanofibers With Crystalline Framework for High-Performance Acetone Sensing

Semiconducting metal oxides with abundant active sites are regarded as promising candidates for environmental monitoring and breath analysis because of their excellent gas sensing performance and stability. Herein, mesoporous WO₃ nanofibers with a crystalline framework and uniform pore size is successfully synthesized in an aqueous phase using an electrospinning method, with ammonium metatungstate as the tungsten sources, and SiO₂ nanoparticles and polyvinylpyrrolidone as the sacrificial templates. The obtained mesoporous WO₃ nanofibers exhibit a controllable pore size of 26.3–42.2 nm, specific surface area of 24.1–34.4 m²g⁻¹, and a pore volume of 0.15–0.24 cm³g⁻¹. This unique hierarchical structure, with uniform mesopores and interconnected channels, could facilitate the diffusion and transportation of gas molecules in the framework. Gas sensors, based on mesoporous WO₃ nanofibers, exhibit an excellent performance in acetone sensing with a low limit of detection (<1 ppm), short response-recovery time (24 s/27 s), a linear relationship in a broad range, and good selectivity.

Electrospun ZrO2 nanofibers: precursor controlled mesopore ordering and evolution of garland-like nanocrystal arrays

We observed that the hydrolysis-condensation reaction of precursors makes a significant difference in constructing ordered mesopores in electrospun ZrO2 nanofibers. Transmission-SAXS studies confirm the generation of uniform clusters of size ∼1.44 nm in the ZrOCl2·8H2O (inorganic salt) derived sol due to its relatively slow hydrolysis-condensation process. These initial -Zr-O-Zr- clusters acted as building blocks to form uniform 3D ordered cubic (Pm3[combining macron]m) mesopores in the presence of Pluronic F127 surfactant. In contrast, the commonly used Zr-alkoxide (zirconium n-propoxide) precursor, which is highly hydrolysable even after the use of a controlling agent, generates larger clusters with broad size distributions due to the uncontrolled hydrolysis-condensation of alkoxy groups. Accordingly, in the presence of F127, the alkoxide derived sol yielded disordered mesopores in the resultant fibers. XRD under dynamic heating conditions (up to 900 °C) and the corresponding TEM studies of the ZrOCl2·8H2O derived nanofibers confirmed the retention of mesopores even in the extremely thin nanofibers (diameter ∼15-25 nm) after the amorphous to crystal phase transformation (cubic/tetragonal). An interesting morphological transformation has been observed in the nanofibers at 900 °C where the fibers have been uniformly segmented by distinct single nanocrystals (width ∼15-65 nm) with mesopores. Further heat-treatment at 1100 °C made these segmented nanofibers nonporous, and a garland-like appearance with monoclinic nanocrystal arrays was formed.

SiO2 Fibers by Centrifugal Spinning with Excellent Textural Properties and Water Adsorption Performance

Facile and innovative route for large-scale synthesis of SiO2 fibers with excellent textural properties and H2O adsorption performance is presented. At first, a three-dimensional network of SiO2 precursor fibers was produced from tailored spun solutions (without any toxic elements and surfactants) by centrifugal spinning, which is a very modern fiber-synthesis technique, with numerous advantages over electrospinning. Upon thermal annealing of the precursor fibers, mesoporous amorphous SiO2 fibers with an ultrahigh surface area of up to 824 m2/g and pore size distribution in the range of 2-10 nm were produced. Owing to the high number of OH groups available on the surface, the produced SiO2 fibers showed significantly better performance in H2O adsorption compared to that of the reference silicagel.

Soft Chemical Fabrication of Iron-Based Thin Film Electrocatalyst for Water Oxidation under Neutral pH and Structure-Activity Tuning by Cerium Incorporation

Design of electrocatalysts for the fundamentally important oxygen evolution reaction can be greatly aided by systematic structure-activity tuning via composition variation. We have explored the iron-cerium system as they are the most abundant transition and rare earth metals, and also due to the mutualistic impact of their size and electronic attributes that can induce critical changes in the structure and electrochemical activity. Submicrometer thick films of a series of Fe(III)-Ce(III) phosphate(oxyhydroxide) (FeCePH) are fabricated using a soft chemical strategy involving surfactant-aided assembly, spin-coating, and mild thermal annealing. FT-IR, Raman, and X-ray photoelectron spectroscopies, chemical analysis, X-ray diffraction, and electron microscopy reveal the systematic structural, electronic, and morphological variation, on tuning the iron-cerium composition. Nitrogen adsorption-desorption studies show the surface area increasing and pore size distribution shrinking with the cerium content, indicating its structure-directing role. The electrocatalysis of water oxidation by FeCePH films on FTO-coated glass is studied in neutral pH conditions. The overpotential and Tafel slope decrease with increasing cerium content, reaching minima at the optimal Fe:Ce ratio of 1:0.5; the turnover frequency shows a corresponding increase and maximum. The trends are explained on the basis of the structural changes in the films, and the coupling of Ce³⁺/Ce⁴⁺ with Fe³⁺/Fe⁴⁺ that leads to active state regeneration. This study presents a rational strategy to tune the efficiency of easily fabricated transition metal-based electrocatalyst thin films through rare earth metal incorporation; it should prove useful in the design of cost-effective catalysts for water oxidation.

Near-infrared luminescent CaTiO3:Nd3+ nanofibers with tunable and trackable drug release kinetics

750-850 nm (NIR I) and 1000-1400 nm (NIR II) in the near infrared (NIR) spectra are two windows of optical transparency for biological tissues with the latter capable of penetrating tissue deeper. Monitoring drug release from the drug carrier is still a daunting challenge in the field of nanomedicine. To overcome such a challenge, we propose to use porous Nd3+-doped CaTiO3 nanofibers, which can be excited by NIR I to emit NIR II light, to carry drugs to test the concept of monitoring drug release from the nanofibers by detecting the NIR II emission intensity. Towards this end, we first used electrospinning to prepare porous Nd3+-doped CaTiO3 nanofibers by adding micelle-forming surfactant Pluronic F127, followed by annealing to remove the organic component. After a model drug, ibuprofen, was loaded into the porous nanofibers, the drug release from the nanofibers into the phosphate buffered saline (PBS) solution was monitored by detecting the NIR II emission from the nanofibers. We found that the release of the drug molecules from the nanofibers into the PBS solution triggers the quenching of NIR II emission by the hydroxyl groups in the surrounding media. Consequently, more drug release corresponded to more reduction in the intensity of the NIR II emission, allowing us to monitor the drug release by simply detecting the intensity of NIR II from the nanofibers. In addition, we demonstrated that tuning the amount of micelle-forming surfactant Pluronic F127 enabled us to tune the porosity of the nanofibers and thus the drug release kinetics. This study suggests that Nd3+ doped CaTiO3 nanostructures can serve as a promising drug delivery platform with the potential to monitor drug release kinetics by detecting the tissue-penetrating NIR emission.

Synthesis of CaTiO3 Nanofibers with Controllable Drug-Release Kinetics

Calcium titanate (CaTiO3) nanofibers with controlled microstructure were fabricated by a combination of sol-gel and electrospinning approaches. The fiber morphology has been found to rely significantly on the precursor composition. Altering the volume ratio of ethanol to acetic acid from 3.5 to 1.25 enables the morphology of the CaTiO3 nanofibers to be transformed from fibers with a circular cross section to curved ribbon-like structures. Ibuprofen (IBU) was used as a model drug to investigate the drug-loading capacity and drug-release profile of the nanofibers. It was found that the BET surface area and the pore volume decrease markedly with the utilization of F127 surfactant. The nanofibers synthesized without F127 surfactant present the highest drug-loading capacity and the most sustained release kinetics. This study suggests that calcium titanate nanofibers can offer a promising platform for localized drug delivery.

Silica nanofibrous membranes with ultra-softness and enhanced tensile strength for thermal insulation

Novel silica nanofibrous membranes with ultra-softness of 40 mN and enhanced tensile strength of 5.5 MPa were prepared for the first time via an electrospinning process, which exhibited an ultra-low thermal conductivity of 0.0058 W m⁻¹ K⁻¹.