Thermoreversible and Self-Protective Sol-Gel Transition Electrolytes for All-Printed Transferable Microsupercapacitors as Safer Micro-Energy Storage Devices

The safety issue caused by thermal runaway poses a huge threat toward the lifespan and application of high-density electrochemical energy storage devices, especially in the field of micro-energy, such as microsupercapacitors (MSCs). The heat accumulation is difficult to be eliminated, considering the narrow space inside integrated electronic devices attached to the MSC group. Active thermal management is of paramount importance to ensure the normal operation of electronic devices. However, existing one-time thermal protection strategies cannot fully meet current requirements. Herein, we report a promising thermoreversible temperature-responsive electrolyte system, which can shut down the current flow before thermal runaway occurs, thanks to the sol-gel transition of Pluronic [poly(ethylene oxide)-block-poly(propylene oxide)-block-poly(ethylene oxide)]-based graft copolymer solution. As the temperature rises to 80 °C, the self-protective electrolyte will change from the sol state to gel state. Meanwhile, the internal resistance increases and ionic conductivity decreases gradually as a result of the gelation of the sol electrolyte. The capacity of the energy storage device using the self-protective electrolyte is reduced by about 95%, and the ionic conductivity remains at only 1% at 80 °C compared with the initial value at room temperature, and it can be restored after cooling down. During 20 heating/cooling cycles, the electrochemical performance is substantially stable, demonstrating a potential approach to achieve repeatability and self-protection for micro-energy storage devices according to temperature changes. In addition, we integrated the as-prepared self-protective electrolyte into MSCs via three-dimensional printing technology to design an all-printed transferable micro-energy storage device with the dynamic reversible self-protection behavior, and the thermo-switchable protection mechanism under series and parallel conditions were studied under appropriate temperature window (25-80 °C). The strategy disclosed herein is expected to provide new insights into the new-generation smart MSCs for their wide applications in diverse fields such as microelectronics and wearable devices.

Thermoresponsivity, Micelle Structure, and Thermal-Induced Structural Transition of an Amphiphilic Block Copolymer Tuned by Terminal Multiple H-Bonding Units

Constructing noncovalent interactions has been a benign method to tune the stimuli responsivity and assembled structure of polymers in solution; this is essential for controlling the functions and properties of stimuli-responsive materials. Herein, we demonstrate a novel supramolecular strategy to manipulate the cloud point (T_cp) and assembled structure of thermoresponsive polymers in solution by using H-bonding interactions. We use poly(lactide-co-glycolide)-b-poly(ethylene glycol)-b- poly(lactide-co-glycolide) (PLGA-PEG-PLGA) as a model thermoresponsive polymer and functionalize its chain terminals by the self-complementary quadruple H-bonding motif, 2-ureido-4[1H]-pyrimidinone (UPy). UPy end functionalization and increasing PLGA block length decrease the T_cp of copolymer. Both UPy- and nonfunctionalized copolymers form the spherical micelles at low temperature. They undergo the intermicellar aggregation and form large compound micelles during heating; this thermally induced structural transition causes the presence of T_cp. Due to the UPy-UPy H-bonding interactions, UPy end functionalization leads to more copolymer chains to associate in one micelle, thus, enhancing the hydrodynamic, gyration radii, core size, as well as the packing density of PLGA in micelle core and grafting density of PEG on core-shell interface. The decreased T_cp of UPy-functionalized copolymer stemmed from the stronger intermicellar attractions at high temperature. Furthermore, UPy-functionalized copolymers exhibit higher drug loading content, slower drug release rate, and better separation efficiency in removing the hydrophobic substances from water than PLGA-PEG-PLGA precursors.

Tuning the Thermoresponsivity of Amphiphilic Copolymers via Stereocomplex Crystallization of Hydrophobic Blocks

Thermoresponsive polymers that exhibit a cloud point temperature (T_cp) are an important class of stimuli-responsive polymers that have great potential for biomedical applications. Precise tuning of the T_cp is of fundamental importance for designing thermoresponsive polymers. However, tuning the T_cp generally requires sophisticated control over the chemical and assembled structures of thermoresponsive polymers. Here, we report a simple yet effective method to tune the T_cp of thermoresponsive polymers only by mixing and varying the mixing ratios of amphiphilic copolymer pair that contains l- and d-configured hydrophobic blocks in a dilute solution. Stereocomplex (SC) crystallization of the l- and d-configured blocks led to form core-shell micelles with a larger size, a bigger core, and a higher aggregation number, which facilitated the intermicellar aggregation upon heating due to improved intermicellar attractions. SC crystallization of the hydrophobic blocks improved the separation efficacy of the thermoresponsive copolymers for removal of hydrophobic pollutants from water.

LCST phase behavior of benzo-21-crown-7 with different alkyl chains

The introduction of hydrophobic units into crown ethers can dramatically decrease the critical transition temperature of LCST and realize macroscopic phase separation at low to moderate temperature and concentration. Minor modifications in the chemical structure of crown ethers (benzo-21-crown-7, B21C7s) can effectively control the thermo-responsive properties.

A degradable low molecular weight monomer system with lower critical solution temperature behaviour in water

A degradable thermo-responsive system was prepared and investigated. The degradation behaviour induced by the cleavage process of the thermo-sensitive crown ethers effectively altered the thermo-responsiveness.

Differences in solubilities, crystal structures, NMR spectra and fluorescence emissions induced by potassium cation/benzo-21-crown-7 molecular recognition

Changes of the fundamental properties of host–guest pairs induced by potassium cation complexation were investigated.

LCST behavior controlled by size-matching selectivity from low molecular weight monomer systems

LCST behavior was controlled by crown ether–cation recognition motifs via size-matching selectivity.

Thermal-Responsive Polymers for Enhancing Safety of Electrochemical Storage Devices

Thermal runway constitutes the most pressing safety issue in lithium-ion batteries and supercapacitors of large-scale and high-power density due to risks of fire or explosion. However, traditional strategies for averting thermal runaway do not enable the charging-discharging rate to change according to temperature or the original performance to resume when the device is cooled to room temperature. To efficiently control thermal runaway, thermal-responsive polymers provide a feasible and reversible strategy due to their ability to sense and subsequently act according to a predetermined sequence when triggered by heat. Herein, recent research progress on the use of thermal-responsive polymers to enhance the thermal safety of electrochemical storage devices is reviewed. First, a brief discussion is provided on the methods of preventing thermal runaway in electrochemical storage devices. Subsequently, a short review is provided on the different types of thermal-responsive polymers that can efficiently avoid thermal runaway, such as phase change polymers, polymers with sol-gel transitions, and polymers with positive temperature coefficients. The results represent the important development of thermal-responsive polymers toward the prevention of thermal runaway in next-generation smart electrochemical storage devices.

Supramolecular control over pillararene-based LCST phase behaviour

Based on the supramolecular interactions between pillar[5]arenes and ionic liquids, supramolecular control was successfully introduced into thermo-responsive systems to adjust LCST phase behaviour in water.

Self-Protection of Electrochemical Storage Devices via a Thermal Reversible Sol-Gel Transition

Thermal self-protected intelligent electrochemical storage devices are fabricated using a reversible sol-gel transition of the electrolyte, which can decrease the specific capacitance and increase and enable temperature-dependent charging and discharging rates in the device. This work represents proof of a simple and useful concept, which shows tremendous promise for the safe and controlled power delivery in electrochemical devices.

Electrochemical redox responsive polymeric micelles formed from amphiphilic supramolecular brushes

The end-decorated homopolymer poly(ε-caprolactone)-ferrocene threaded onto a β-cyclodextrin-functionalized main-chain polymer can form a class of amphiphilic noncovalent graft copolymers based on the host-guest interactions of the terminal groups on the side chains. These new supramolecular polymer brushes can further self-assemble into micellar aggregates that exhibit reversible assembly and disassembly behavior under an electrochemical redox trigger, which opens up a new route to building dynamic block copolymer topologies.

A discrete amphiphilic organoplatinum(II) metallacycle with tunable lower critical solution temperature behavior

Oligo(ethylene glycol) (OEG)-decorated supramolecular assemblies are distinguished by their neutral character and macroscopic temperature-sensitive phase transition behavior. OEG functionalization is an emerging strategy to obtain thermoresponsive macrocyclic amphiphiles, although known methods organize the hydrophilic and hydrophobic segments by covalent bonding. Coordination-driven self-assembly offers an alternative route for organizing OEG-functionalized precursors into nanoscopic architectures, resulting in well-defined metallacycle cores surrounded by hydrophilic scaffolds to impart overall amphiphilic character. Here a tri(ethylene glycol)-functionalized thermosensitive amphiphilic metallacycle was prepared with high efficiency by means of the directional-bonding approach. The ensembles thus formed showed good lower critical solution temperature behavior with a highly sensitive phase separation and excellent reversibility. Moreover, the clouding point decreased with increasing metallacycle concentration and addition of K(+).

LCST-type phase behavior induced by pillar[5]arene/ionic liquid host-guest complexation

The host-guest complex of dipropoxypillar[5]arene and an ionic liquid 1,3-dimethylimidazolium iodide is found to exhibit a lower critical solution temperature (LCST)-type phase transition in chloroform. This LCST-type phase behavior can be conveniently modulated by experimental parameters and can be easily combined with the ionic liquid for potential application in product and educt separation.