Widely Tuneable Composition and Crystallinity of Graded Na1+xTaO3±δ Thin Films Fabricated by Chemical Beam Vapor Deposition

Combinatorial approach has been widely recognized as a powerful strategy to develop new-higher performance materials and shed the light on the stoichiometry-dependent properties of known systems. Herein, we take advantage of the unique features of chemical beam vapor deposition to fabricate compositionally graded Na1+xTaO3±δ thin films with −0.6 < x < 0.5. Such a varied composition was enabled by the ability of the employed technique to deliver and combine an extensive range of precursors flows over the same deposition area. The film growth occurred in a complex process, where precursor absolute flows, flow ratios, and substrate temperature played a role. The deviation of the measured Na/Ta ratios from those predicted by flow simulations suggests that a chemical-reaction limited regime underlies the growth mechanism and highlights the importance of the Ta precursor in assisting the decomposition of the Na one. The crystallinity was observed to be strongly dependent on its stoichiometry. High under-stoichiometries (e.g., Na0.5TaO3−δ) compared to NaTaO3 were detrimental for the formation of a perovskite framework, owing to the excessive amount of sodium vacancies and oxygen vacancies. Conversely, a well-crystallized orthorhombic perovskite structure peculiar of NaTaO3 was observed from mildly under-stoichiometric (e.g., Na0.9TaO3−δ) to highly over-stoichiometric (e.g., Na1.5TaO3+δ) compositions.

Photocatalytic Air Purification Using Functional Polymeric Carbon Nitrides

The techniques for the production of the environment have received attention because of the increasing air pollution, which results in a negative impact on the living environment of mankind. Over the decades, burgeoning interest in polymeric carbon nitride (PCN) based photocatalysts for heterogeneous catalysis of air pollutants has been witnessed, which is improved by harvesting visible light, layered/defective structures, functional groups, suitable/adjustable band positions, and existing Lewis basic sites. PCN-based photocatalytic air purification can reduce the negative impacts of the emission of air pollutants and convert the undesirable and harmful materials into value-added or nontoxic, or low-toxic chemicals. However, based on previous reports, the systematic summary and analysis of PCN-based photocatalysts in the catalytic elimination of air pollutants have not been reported. The research progress of functional PCN-based composite materials as photocatalysts for the removal of air pollutants is reviewed here. The working mechanisms of each enhancement modification are elucidated and discussed on structures (nanostructure, molecular structue, and composite) regarding their effects on light-absorption/utilization, reactant adsorption, intermediate/product desorption, charge kinetics, and reactive oxygen species production. Perspectives related to further challenges and directions as well as design strategies of PCN-based photocatalysts in the heterogeneous catalysis of air pollutants are also provided.

Perovskite Oxides Prepared by Hydrothermal and Solvothermal Synthesis: A Review of Crystallisation, Chemistry, and Compositions

Perovskite oxides with general composition ABO₃ are a large group of inorganic materials that can contain a variety of cations from all parts of the Periodic Table and that have diverse properties of application in fields ranging from electronics, energy storage to photocatalysis. Solvothermal synthesis routes to these materials have become increasingly investigated in the past decade as a means of direct crystallisation of the solids from solution. These methods have significant advantages leading to adjustment of crystal form from the nanoscale to the micron-scale, the isolation of compositions not possible using conventional solid-state synthesis and in addition may lead to scalable processes for producing materials at moderate temperatures. These aspects are reviewed, with examples taken from the past decade's literature on the solvothermal synthesis of perovskites with a systematic survey of B-site cations, from transition metals in Groups 4-8 and main group elements in Groups 13, 14 and 15, to solid solutions and heterostructures. As well as hydrothermal reactions, the use of various solvents and solution additives are discussed and some trends identified, along with prospects for developing control and predictability in the crystallisation of complex oxide materials.

Particulate Photocatalysts for Light-Driven Water Splitting: Mechanisms, Challenges, and Design Strategies

Solar-driven water splitting provides a leading approach to store the abundant yet intermittent solar energy and produce hydrogen as a clean and sustainable energy carrier. A straightforward route to light-driven water splitting is to apply self-supported particulate photocatalysts, which is expected to allow solar hydrogen to be competitive with fossil-fuel-derived hydrogen on a levelized cost basis. More importantly, the powder-based systems can lend themselves to making functional panels on a large scale while retaining the intrinsic activity of the photocatalyst. However, all attempts to generate hydrogen via powder-based solar water-splitting systems to date have unfortunately fallen short of the efficiency values required for practical applications. Photocatalysis on photocatalyst particles involves three sequential steps: (i) absorption of photons with higher energies than the bandgap of the photocatalysts, leading to the excitation of electron-hole pairs in the particles, (ii) charge separation and migration of these photoexcited carriers, and (iii) surface chemical reactions based on these carriers. In this review, we focus on the challenges of each step and summarize material design strategies to overcome the obstacles and limitations. This review illustrates that it is possible to employ the fundamental principles underlying photosynthesis and the tools of chemical and materials science to design and prepare photocatalysts for overall water splitting.

pH-Dependent structure of water-exposed surfaces of CdSe quantum dots

Increasing negative charge density at the surfaces of CdSe quantum dots (QDs) effects a bathochromic shift of their ground state optical spectra with increasing pH due to electrostatic and chemical modifications at the QD surface. These modifications are enabled by weakly-bound ligands that expose the surface to the aqueous environment.

Efficient and stable photocatalytic NO removal on C self-doped g-C3N4: electronic structure and reaction mechanism

The unique electronic structure of C self-doped g-C₃N₄ enables highly enhanced photocatalytic NO removal efficiency.

Oxygen-Induced Bi5+-Self-Doped Bi4V2O11 with a p-n Homojunction Toward Promoting the Photocatalytic Performance

Bi⁵⁺-self-doped Bi₄V₂O₁₁ (Bi⁵⁺-BVO) nanotubes with p-n homojunctions are fabricated via an oxygen-induced strategy. Calcinating the as-spun fibers with abundant oxygen plays a pivotal role in achieving Bi⁵⁺ self-doping. Density functional theory calculations and experimental results indicate that Bi⁵⁺ self-doping can narrow the band gap of Bi₄V₂O₁₁, which contributes to enhancing light harvesting. Moreover, Bi⁵⁺ self-doping endows Bi₄V₂O₁₁ with n- and p-type semiconductor characteristics simultaneously, resulting in the construction of p-n homojunctions for retarding rapid electron-hole recombination. Benefiting from these favorable properties, Bi⁵⁺-BVO exhibits a superior photocatalytic performance in contrast to that of pristine Bi₄V₂O₁₁. Furthermore, this is the first report describing the achievement of p-n homojunctions through self-doping, which gives full play to the advantages of self-doping.

Achievement of visible-light-driven Z-scheme overall water splitting using barium-modified Ta3N5 as a H2-evolving photocatalyst

Barium-modified Ta₃N₅ for the promotion of proton reduction is first employed as a H₂-evolving photocatalyst for visible-light-driven Z-scheme overall water splitting.

Ta₃N₅ is one of the most promising photocatalyst candidates for solar water splitting, but it still remains challenging to achieve overall water splitting via Ta₃N₅-based photocatalysts regardless of whether it uses a one step or two step method. Here we will address the relatively poor photocatalytic proton reduction of Ta₃N₅ with an effort for the promotion of charge separation via barium modification. One-pot nitridation of barium nitrate-impregnated Ta₂O₅ precursor was adopted here for the synthesis of Ta₃N₅ accompanied with the creation of a Ta₃N₅/BaTaO₂N heterostructure and surface passivation. Due to the synergetic effect of the improved interfacial charge separation and the decreased defect density, the photocatalytic H₂ evolution rate of barium-modified Ta₃N₅ is effectively promoted. Encouraged by this, a visible-light-driven Z-scheme overall water splitting system was successfully constructed by using the barium-modified Ta₃N₅ as a H₂-evolving photocatalyst, together with a PtO_x/WO₃ and IO₃^–/I^– pair as an O₂-evolving photocatalyst and a redox mediator, respectively.

In situ preparation of cubic Cu2O-RGO nanocomposites for enhanced visible-light degradation of methyl orange

There has been a growing interest in gathering together photocatalysis of semiconductors, like cuprous oxide (Cu2O), and the excellent electron transmittability of graphene to produce a graphene-based semiconductor for photocatalytic degradation. In this paper, a mild one-pot in situ synthesis of cubic cuprous oxide-reduced graphene oxide (Cu2O-RGO) nanocomposites has been proposed for the removal of methyl orange. In contrast to pure cubic Cu2O particles under similar preparation conditions, the cubic Cu2O-RGO nanocomposites demonstrate enhanced visible-light-driven photocatalytic activity for methyl orange dye with a 100% degradation rate in 100 min. The enhanced photocatalytic performance is mainly attributed to the increased charge transportation, effective separation of photoelectrons from vacancies, and the improved contact area.

Inorganic perovskite photocatalysts for solar energy utilization

This review specifically summarizes the recent development of perovskite photocatalysts and their applications in water splitting and environmental remediation.

One-pot synthesis and Nb4N5 surface modification of Nb4+ self-doped KNbO3 nanorods for enhanced visible-light-driven hydrogen production

A facile method is developed to synthesize Nb⁴⁺ self doped KN nanorods modified with Nb₄N₅ nanoparticles, which exhibit enhanced visible-light photocatalytic activity for hydrogen production.

Template synthesis of carbon self-doped g-C3N4 with enhanced visible to near-infrared absorption and photocatalytic performance

Carbon self-doped g-C₃N₄ with enhanced visible to near-infrared absorption and photocatalytic activity was synthesized by a soft-template method.

Redox shuttle mechanism enhances photocatalytic H2 generation on Ni-decorated CdS nanorods

Photocatalytic conversion of solar energy to fuels, such as hydrogen, is attracting enormous interest, driven by the promise of addressing both energy supply and storage. Colloidal semiconductor nanocrystals have been at the forefront of these efforts owing to their favourable and tunable optical and electronic properties as well as advances in their synthesis. The efficiency of the photocatalysts is often limited by the slow transfer and subsequent reactions of the photoexcited holes and the ensuing high charge recombination rates. Here we propose that employing a hydroxyl anion/radical redox couple to efficiently relay the hole from the semiconductor to the scavenger leads to a marked increase in the H2 generation rate without using expensive noble metal co-catalysts. The apparent quantum yield and the formation rate under 447 nm laser illumination exceeded 53% and 63 mmol g(-1) h(-1), respectively. The fast hole transfer confers long-term photostability on the system and opens new pathways to improve the oxidation side of full water splitting.