Preparation and reactivity of a dinitrogen-bridged dimolybdenum-tetrachloride complex

Mechanisms of Electrochemical N2 Splitting by a Molybdenum Pincer Complex

Molybdenum complexes supported by tridentate pincer ligands are exceptional catalysts for dinitrogen fixation using chemical reductants, but little is known about their prospects for electrochemical reduction of dinitrogen. The viability of electrochemical N₂ binding and splitting by a molybdenum(III) pincer complex, (^pyPNP)MoBr₃ (^pyPNP = 2,6-bis(^tBu₂PCH₂)-C₅H₃N)), is established in this work, providing a foundation for a detailed mechanistic study of electrode-driven formation of the nitride complex (^pyPNP)Mo(N)Br. Electrochemical kinetic analysis, optical and vibrational spectroelectrochemical monitoring, and computational studies point to two concurrent reaction pathways: In the reaction-diffusion layer near the electrode surface, the molybdenum(III) precursor is reduced by 2e^- and generates a bimetallic molybdenum(I) Mo₂(μ-N₂) species capable of N-N bond scission; and in the bulk solution away from the electrode surface, over-reduced molybdenum(0) species undergo chemical redox reactions via comproportionation to generate the same bimetallic molybdenum(I) species capable of N₂ cleavage. The comproportionation reactions reveal the surprising intermediacy of dimolybdenum(0) complex trans,trans-[(^pyPNP)Mo(N₂)₂](μ-N₂) in N₂ splitting pathways. The same "over-reduced" molybdenum(0) species was also found to cleave N₂ upon addition of lutidinium, an acid frequently used in catalytic reduction of dinitrogen.

Comprehensive insights into synthetic nitrogen fixation assisted by molecular catalysts under ambient or mild conditions

N2 is fixed as NH3 industrially by the Haber-Bosch process under harsh conditions, whereas biological nitrogen fixation is achieved under ambient conditions, which has prompted development of alternative methods to fix N2 catalyzed by transition metal molecular complexes. Since the early 21st century, catalytic conversion of N2 into NH3 under ambient conditions has been achieved by using molecular catalysts, and now H2O has been utilized as a proton source with turnover frequencies reaching the values found for biological nitrogen fixation. In this review, recent advances in the development of molecular catalysts for synthetic N2 fixation under ambient or mild conditions are summarized, and potential directions for future research are also discussed.

Activation of Dinitrogen by Polynuclear Metal Complexes

Activation of dinitrogen plays an important role in daily anthropogenic life, and the processes by which this fixation occurs have been a longstanding and significant research focus within the community. One of the major fields of dinitrogen activation research is the use of multimetallic compounds to reduce and/or activate N2 into a more useful nitrogen-atom source, such as ammonia. Here we report a comprehensive review of multimetallic-dinitrogen complexes and their utility toward N2 activation, beginning with the d-block metals from Group 4 to Group 11, then extending to Group 13 (which is exclusively populated by B complexes), and finally the rare-earth and actinide species. The review considers all polynuclear metal aggregates containing two or more metal centers in which dinitrogen is coordinated or activated (i.e., partial or complete cleavage of the N2 triple bond in the observed product). Our survey includes complexes in which mononuclear N2 complexes are used as building blocks to generate homo- or heteromultimetallic dinitrogen species, which allow one to evaluate the potential of heterometallic species for dinitrogen activation. We highlight some of the common trends throughout the periodic table, such as the differences between coordination modes as it relates to N2 activation and potential functionalization and the effect of polarizing the bridging N2 ligand by employing different metal ions of differing Lewis acidities. By providing this comprehensive treatment of polynuclear metal dinitrogen species, this Review aims to outline the past and provide potential future directions for continued research in this area.

Catalytic N2-to-NH3 (or -N2H4) Conversion by Well-Defined Molecular Coordination Complexes

Nitrogen fixation, the six-electron/six-proton reduction of N₂, to give NH₃, is one of the most challenging and important chemical transformations. Notwithstanding the barriers associated with this reaction, significant progress has been made in developing molecular complexes that reduce N₂ into its bioavailable form, NH₃. This progress is driven by the dual aims of better understanding biological nitrogenases and improving upon industrial nitrogen fixation. In this review, we highlight both mechanistic understanding of nitrogen fixation that has been developed, as well as advances in yields, efficiencies, and rates that make molecular alternatives to nitrogen fixation increasingly appealing. We begin with a historical discussion of N₂ functionalization chemistry that traverses a timeline of events leading up to the discovery of the first bona fide molecular catalyst system and follow with a comprehensive overview of d-block compounds that have been targeted as catalysts up to and including 2019. We end with a summary of lessons learned from this significant research effort and last offer a discussion of key remaining challenges in the field.

Synthesis and characterization of TADDOL-based chiral group six PNP pincer tricarbonyl complexes

ABSTRACT

The new chiral PNP pincer ligand N 2,N 6-bis((3aR, 8aR)-2,2-dimethyl-4,4,8,8-tetraphenyltetrahydro[1,3]dioxolo[4,5-e][1,3,2]dioxaphosphepin-6-yl)pyridine-2,6-diamine (PNP-TADDOL) was synthesized in 80% isolated yield. Complexes of the type [M(PNP-TADDOL)(CO)3] (M = Cr, Mo, and W) were prepared via a solvothermal approach. This methodology constitutes a fast, simple, and practical synthetic method to obtain complexes of that type in high isolated yields. The X-ray structure of the molybdenum complex is presented.

GRAPHICAL ABSTRACT

Putting chromium on the map for N2 reduction: production of hydrazine and ammonia. A study of cis-M(N2)2 (M = Cr, Mo, W) bis(diphosphine) complexes

Protonolysis experiments show of the Group 6 N₂ complexes, only Cr affords N₂H₅⁺ and NH₄⁺ from reduction of the N₂ ligands.

Recent progress in transition-metal-catalyzed reduction of molecular dinitrogen under ambient reaction conditions

This paper describes our recent progress in catalytic nitrogen fixation by using transition-metal-dinitrogen complexes as catalysts. Two reaction systems for the catalytic transformation of molecular dinitrogen into ammonia and its equivalent such as silylamine under ambient reaction conditions have been achieved by the molybdenum-, iron-, and cobalt-dinitrogen complexes as catalysts. Many new findings presented here may provide new access to the development of economical nitrogen fixation in place of the Haber-Bosch process.

Synthesis and reactivity of coordinatively unsaturated halocarbonyl molybdenum PNP pincer complexes

In the present study a series of six-coordinate neutral 16e halocarbonyl Mo(ii) complexes of the type [Mo(PNP(Me)-iPr)(CO)X2] (X = I, Br, Cl), featuring the PNP pincer ligand N,N'-bis(diisopropylphosphino)-N,N'-dimethyl-2,6-diaminopyridine (PNP(Me)-iPr), were prepared and fully characterized. The synthesis of these complexes was accomplished by different methodologies depending on the halide ligands. For X = I and Br, [Mo(PNP(Me)-iPr)(CO)I2] and [Mo(PNP(Me)-iPr)(CO)Br2] were obtained by reacting [Mo(PNP(Me)-iPr)(CO)3] with stoichiometric amounts of I2 and Br2, respectively. In the case of X = Cl, [Mo(PNP(Me)-iPr)(CO)Cl2] was afforded by the reaction of [Mo(CO)4(μ-Cl)Cl]2 with 1 equiv. of PNP(Me)-iPr. The equivalent procedure also worked for X = Br. The modification of the 2,6-diaminopyridine scaffold by introducing NMe instead of NH spacers between the aromatic pyridine ring and the phosphine moieties changed the steric properties of the PNP-iPr ligand significantly. While in the present case exclusively neutral six-coordinate complexes of the type [Mo(PNP(Me)-iPr)(CO)X2] were obtained, with the parent PNP-iPr ligand, i.e. featuring NH spacers, cationic seven-coordinate complexes of the type [Mo(PNP-iPr)(CO)3X]X were afforded. Upon treatment of [Mo(PNP(Me)-iPr)(CO)X2] (X = Br, Cl) with Ag(+) in CH3CN, the cationic complexes [Mo(PNP(Me)-iPr)(CO)(CH3CN)X](+) were formed. Halide abstraction from [Mo(PNP(Me)-iPr)(CO)Cl2] in THF-CH2Cl2 afforded [Mo(PNP(Me)-iPr)(CO)(THF)Cl](+). In keeping with the facile synthesis of monocationic complexes preliminary ESI-MS and DFT/B3LYP studies revealed that one halide ligand in complexes [Mo(PNP(Me)-iPr)(CO)X2] is labile forming cationic fragments [Mo(PNP(Me)-iPr)(CO)X](+) which react with molecular oxygen in parallel pathways to yield mono and dioxo Mo(iv) and Mo(vi) species. Structures of representative complexes were determined by X-ray single crystal analyses.

A phosphomide based PNP ligand, 2,6-{Ph2PC(O)}2(C5H3N), showing PP, PNP and PNO coordination modes

Coordination chemistry of a versatile phosphomide ligand, 2,6-{Ph₂PC(O)}₂(C₅H₃N), is described.

Unique behaviour of dinitrogen-bridged dimolybdenum complexes bearing pincer ligand towards catalytic formation of ammonia

It is vital to design effective nitrogen fixation systems that operate under mild conditions, and to this end we recently reported an example of the catalytic formation of ammonia using a dinitrogen-bridged dimolybdenum complex bearing a pincer ligand, where up to twenty three equivalents of ammonia were produced based on the catalyst. Here we study the origin of the catalytic behaviour of the dinitrogen-bridged dimolybdenum complex bearing the pincer ligand with density functional theory calculations, based on stoichiometric and catalytic formation of ammonia from molecular dinitrogen under ambient conditions. Comparison of di- and mono-molybdenum systems shows that the dinitrogen-bridged dimolybdenum core structure plays a critical role in the protonation of the coordinated molecular dinitrogen in the catalytic cycle.

Research into molecular catalysts for conversion of nitrogen into ammonia under mild conditions is ongoing. Here, the authors synthesize a dimolybdenum–nitride complex and verify the role of the dimetallic core in the protonation of the coordinated dinitrogen.