Square-planar Tetranuclear Cluster-based Alkaline Earth Metal-organic Frameworks with Enhanced Proton Conductivity

Alkaline earth (AE) metal complexes have garnered significant interest in various functional fields due to their nontoxicity, low density, and low cost. However, there is a lack of systematic investigation into the structural characteristics and physical properties of AE-metal-organic frameworks (MOFs). In this research, we synthesized isostructural MOFs consisting of AE4(μ4-Cl) clusters bridged by benzo-(1,2;3,4;5,6)-tris(thiophene-2'-carboxylic acid) (BTTC3-) ligands. The resulting structure forms a truncated octahedral cage denoted as [AE4(m4-Cl)]6(BTTC)8, which further linked to a porous three-dimensional framework. Among the investigated AE ions (Ca, Sr, and Ba), the Ca4-MOF demonstrated good chemical stability in water compared to Sr4-MOF and Ba4-MOF. The N2 adsorption and solid-state UV-vis-NIR absorption behaviors were evaluated for all AE4-MOFs, showing similar trends among the different metal ions. Additionally, the proton conduction study revealed that the Ca4-MOF exhibited ultra-high proton conductivity, reaching 3.52×10-2 S cm-1 at 343 K and 98 % RH. Notably, the introduction of LiCl via guest exchange resulted in an improved proton conduction of up to 6.36×10-2 S cm-1 under similar conditions in the modified LiCl@Ca4-MOF. The findings shed light on the regulation of physical properties and proton conductivity of AE-MOFs, providing valuable insights for their potential applications in various fields.

A Solid Zn-Ion Conductor from an All-Zinc Metal-Organic Framework Replete with Mobile Zn2+ Cations

We describe the synthesis and properties of Zn3[(Zn4Cl)3(BTT)8]2 (ZnZnBTT, BTT3- = 1,3,5-benzenetristetrazolate), a heretofore unknown member of a well-known, extensive family of metal-organic frameworks (MOFs) with the general formula MII3[(MII4Cl)3(BTT)8]2, which adopts an anionic, sodalite-like structure. As with previous members in this family, ZnZnBTT presents two crystallographically distinct metal cations: a skeletal Zn2+ site, fixed within Zn4Cl(tetrazole)8 secondary building units (SBUs), and a charge-balancing Zn2+ site. Self-assembly of ZnZnBTT from its building blocks has remained elusive; instead, we show that ZnZnBTT is readily accessed by quantitative postsynthetic exchange of all Mn2+ ions in MnMnBTT with zinc. We further demonstrate that ZnZnBTT is a promising Zn-ion conductor owing to the mobile charge-balancing extra-framework Zn2+ cations. The new material displays a Zn-ion conductivity of σ = 1.15 × 10-4 S/cm at room temperature and a relatively low activation energy of Ea = 0.317 eV, enabling potential applications in the emerging field of quasi-solid-state zinc-ion batteries.

Multivariate metal-organic framework MTV-MIL-101 via post-synthetic cation exchange: is it truly achievable?

The post-synthetic exchange (PSE) method is a well-proven route to replace, modify, and add different functionalities to metal-organic frameworks (MOFs). Particularly, the solvent-assisted cation substitution (SACS) technique has been reported to prepare mixed-metal multivariate metal-organic frameworks (MTV-MOFs). However, such a technique does not apply to all types of MOFs. In 2013, Szilágyi et al. reported the achievement of the mixed-metal MTV-MIL-101 framework via PSE. Since then, a debate has been taking place about the validity of these findings. On the other hand, the attainment of the mixed-metal MIL-101 was reported to be obtainable through the direct synthesis, which is, to some, the only way to achieve it. Here, we settle this dispute by investigating Szilágyi's method not only as described, but also at extended conditions of time and different metal precursors: all attempts were vain. However, by reconsidering the refluxing solvent (dimethylformamide "DMF" instead of water) and the applied reaction conditions (110 °C-20 h), mixed-metal MIL-101(Cr/Fe) was achieved via a simple PSE method.

(4,5,8)-Connected Cationic Coordination Polymer Material as Explosive Chemosensor Based on the in Situ Generated AIE Tetrazolyl-Tetraphenylethylene Derivative

A multidentate tetrazole molecule based on a TPE core, tetrakis[4-(1H-tetrazol-5-yl)phenyl]ethylene (H₄ttpe) with combined advantages of two functional groups, was synthesized by cycloaddition reaction of the corresponding organic benzonitrile derivative and azide salt. Coordination self-assembly of the in situ formed aggregation-induced emission polytetrazole luminogen with cadmium(II) ion produces an unprecedented tetrazolyl-TPE-based microporous cationic metal-organic framework (MOF) with an unusual (4,5,8T14)-connected net of {[Cd₄(H₄ttpe)₂Cl₅]·(N₃)₃}, in which the H₄ttpe serves as the first undeprotonated tetrazole ligand of octa-coordinating bridging mode. We investigate, for the first time, the utilization of the luminescent MOF containing a TPE core decorated with tetrazolyl terminals for explosive detection based on the change in fluorescence intensity, which shows high selectivity and efficiency in fluorescence quenching toward TNP detection in water solution.

Bimetallic metal-organic frameworks and their derivatives

Bimetallic metal-organic frameworks (MOFs) have two different metal ions in the inorganic nodes. According to the metal distribution, the architecture of bimetallic MOFs can be classified into two main categories namely solid solution and core-shell structures. Various strategies have been developed to prepare bimetallic MOFs with controlled compositions and structures. Bimetallic MOFs show a synergistic effect and enhanced properties compared to their monometallic counterparts and have found many applications in the fields of gas adsorption, catalysis, energy storage and conversion, and luminescence sensing. Moreover, bimetallic MOFs can serve as excellent precursors/templates for the synthesis of functional nanomaterials with controlled sizes, compositions, and structures. Bimetallic MOF derivatives show exposed active sites, good stability and conductivity, enabling them to extend their applications to the catalysis of more challenging reactions and electrochemical energy storage and conversion. This review provides an overview of the significant advances in the development of bimetallic MOFs and their derivatives with special emphases on their preparation and applications.

Rare metal-ion metathesis of a tetrahedral Zn(ii) core of a noncentrosymmetric (3,4)-connected 3D MOF

An SHG-active framework of 1-Zn can undergo metal metathesis, in which the tetrahedrally coordinated Zn(ii) ions are completely exchanged with Cu(ii) ions while retaining the integrity of the network.

Mixed-metal metal–organic frameworks

Mixed-metal MOFs contain at least 2 different metal ions presenting promising potential in heterogeneous catalysis, gas sorption/separation, luminescence and sensing.

Development of Isostructural Porphyrin-Salen Chiral Metal-Organic Frameworks through Postsynthetic Metalation Based on Single-Crystal to Single-Crystal Transformation

The development of well-defined multimetallic porous metal-organic frameworks (MOFs) will add a new dimension to the application of MOF catalysis. From this perspective, the understanding and tailoring of the catalytic metal sites in MOFs are key fundamental challenges that could reveal the intrinsic potential of these materials. In this work, a series of porphyrin-salen chiral MOFs (ps-CMOFs 2-7) have been synthesized through postsynthetic metalation (PSMet) of the parent ps-CMOF via single-crystal to single-crystal transformation. Crystal structures of these ps-CMOF analogues revealed the same topological structure but varied metal entities compared to those of the parent framework. Note that the PSMet process involves three methods involving cation exchange at the nodes, cation exchange at the metalated porphyrin, and cation addition at the free porphyrin, which has been systematically investigated using single-crystal X-ray diffraction and other physicochemical methods. The N₂ adsorption tests, thermogravimetric analysis, and powder X-ray diffraction of 2-7 showed curves or patterns similar to those of 1, indicating the maintenance of the crystallinity, porosity, and thermal stability of the framework during the PSMet process. In addition, 2-7 showed distinctly improved adsorption capacities and isosteric heats of adsorption (Q_st) for CO₂ compared to those of their parent counterpart. Lastly, as a representative example of the ps-CMOF catalytic platform, 5 proved to be an efficient recyclable heterogeneous catalyst for the asymmetric addition reaction of CO₂ with epoxides under mild conditions. Furthermore, because of the constrained chiral environment within ps-CMOF, the enantioselectivity of this reaction appears to be dependent on substrate size.

Selective, Tunable O2 Binding in Cobalt(II)-Triazolate/Pyrazolate Metal-Organic Frameworks

The air-free reaction of CoCl2 with 1,3,5-tri(1H-1,2,3-triazol-5-yl)benzene (H3BTTri) in N,N-dimethylformamide (DMF) and methanol leads to the formation of Co-BTTri (Co3[(Co4Cl)3(BTTri)8]2·DMF), a sodalite-type metal-organic framework. Desolvation of this material generates coordinatively unsaturated low-spin cobalt(II) centers that exhibit a strong preference for binding O2 over N2, with isosteric heats of adsorption (Qst) of -34(1) and -12(1) kJ/mol, respectively. The low-spin (S = 1/2) electronic configuration of the metal centers in the desolvated framework is supported by structural, magnetic susceptibility, and computational studies. A single-crystal X-ray structure determination reveals that O2 binds end-on to each framework cobalt center in a 1:1 ratio with a Co-O2 bond distance of 1.973(6) Å. Replacement of one of the triazolate linkers with a more electron-donating pyrazolate group leads to the isostructural framework Co-BDTriP (Co3[(Co4Cl)3(BDTriP)8]2·DMF; H3BDTriP = 5,5'-(5-(1H-pyrazol-4-yl)-1,3-phenylene)bis(1H-1,2,3-triazole)), which demonstrates markedly higher yet still fully reversible O2 affinities (Qst = -47(1) kJ/mol at low loadings). Electronic structure calculations suggest that the O2 adducts in Co-BTTri are best described as cobalt(II)-dioxygen species with partial electron transfer, while the stronger binding sites in Co-BDTriP form cobalt(III)-superoxo moieties. The stability, selectivity, and high O2 adsorption capacity of these materials render them promising new adsorbents for air separation processes.

Site-specific metal and ligand substitutions in a microporous Mn2+-based metal–organic framework

Mixed-ligand syntheses and post-synthetic metal exchange performed on the Mn₃L₃ structure type results in site-specific manipulations to the framework structure.

Cation exchange at the secondary building units of metal-organic frameworks

Cation exchange is an emerging synthetic route for modifying the secondary building units (SBUs) of metal-organic frameworks (MOFs). This technique has been used extensively to enhance the properties of nanocrystals and molecules, but the extent of its applications for MOFs is still expanding. To harness cation exchange as a rational tool, we need to elucidate its governing factors. Not nearly enough experimental observations exist for drawing these conclusions, so we provide a conceptual framework for approaching this task. We address which SBUs undergo exchange, why certain ions replace others, how the framework influences the process, the role of the solvent, and current applications. Using these guidelines, certain trends emerge from the available data and missing experiments become obvious. If future studies follow this framework, then a more comprehensive body of observations will furnish a deeper understanding of cation exchange and inspire future applications.

Substitution reactions in metal–organic frameworks and metal–organic polyhedra

This review summarizes the advances in the study of substitution reactions in metal–organic frameworks (MOFs) and metal–organic polyhedra (MOPs).