Investigating the Morphology, Optical, and Thermal Properties of Multiphase-TiO2/MAPbI3 Heterogeneous Thin-Films for Solar Cell Applications

The present study evaluates the effect of mesoporous multiphase titanium dioxide (TiO2) nanoparticles (NPs) as an electron transporting layer and investigates the influence of phase composition on the perovskite solar cell (PSC) performances. This study also aims to evaluate PSC performance using conductive silver ink as an alternative counter electrode. The heterogeneous PSC thin-film solar cells were successfully fabricated and assembled by using a simple a doctor blade and two-step spin coating methods under ambient conditions. Scanning electron microscopy (SEM) micrograph images investigate methyl ammonium lead iodide (MAPbI3) crystal formation on the mesoporous TiO2 surface structure. Energy-dispersive x-ray spectroscopy (EDX) spectra reveal excellent qualitative and quantitative analysis corresponding to the SEM images in the TiO2/MAPbI3 heterogeneous thin films. Thermogravimetric analysis (TGA) characterization reveals that the TiO2/MAPbI3 thin films are thermally stable recording a maximum of 15.7% mass loss at 800 °C elevated temperatures. Photoluminescence spectroscopy (PL) characterized the effect of multiphase TiO2 phase transformation on the TiO2/MAPbI3 recombination efficiencies. A maximum of 6% power conversion efficiency (PCE) with the open-circuit voltage (Voc) of 0.58 ± 0.02 V and short circuit current (Jsc) of 3.89 ± 0.17 mAcm−2 was achieved for devices with an active area of 3 × 10−4 m2 demonstrating that the synthesized multiphase TiO2 nanoparticles are promising for large surface area manufacturing. Therefore, it is apparent that multiphase TiO2 NPs play a significant role in the performance of the final device.

Cotton fabric loaded with self-dispersive and reactive biphasic TiO2 for durable self-cleaning activity and ultraviolet protection

Self-dispersive and reactive biphasic TiO₂ (TiO₂/KH550/SAT) with negative charge was achieved by introducing sulfonic groups and chlorine atoms, respectively, and combined with cotton fabric by the covalent bonding.

Engineering the Morphology and Crystal Phase of 3 D Hierarchical TiO2 with Excellent Photochemical and Photoelectrochemical Solar Water Splitting

Owing to their unique characteristics, hierarchical TiO₂ nanostructures have several advantages in solar-fuel production. In this work, a single-step approach has been developed to control both the crystal phase and morphology of TiO₂ with 3 D urchin-like structure via a surfactant-free solvothermal route. The growth of 3 D hierarchical structure with phase-engineered band alignment, the role of the H₂ O/HCl ratio, and fine-tuning of the reaction parameters are investigated systematically. An optimum ratio of anatase (41 %) to rutile (59 %) in the mixed-phase TiO₂ (AR-2) results in excellent photocatalytic H₂ generation activity of 5753 μmol g^-1 after 5 h of irradiation with apparent quantum yields of 20.9 % at 366 nm and 4.5 % at 420 nm. The superior performance of AR-2, attributed to efficient separation of charge carriers through the phase junction, is apparent from the transient photocurrent response and photoluminescence studies. The 3 D urchin-like pure rutile TiO₂ (R-1) composed of nanorods shows enhanced photocatalytic activity compared with pure anatase and pure rutile TiO₂ nanoparticles, and this demonstrates the role of morphology. The best-performing mixed-phase 3 D TiO₂ shows excellent durability up to 25 h and is shown to produce 3522 μmol g^-1 of H₂ under natural sunlight, which highlights its potential for long-term application.