Controllable Synthesis of ZnO Nanoparticles with Improved Photocatalytic Performance for the Degradation of Rhodamine B under Ultraviolet Light Irradiation

In this work, two-dimensional (2D) Zn-HMT (Zn(NO₃)₂(HMT)₂(H₂O)₂]_n) nanosheets were synthesized using a facile one-step chemical precipitation in the presence of Zn(NO₃)₂, hexamine (HMT), and anhydrous ethanol at room temperature. Subsequently, hexagonal Tx-ZnO (Tx-ZnO refers to the zinc oxide (ZnO) nanoparticles) were synthesized by a high-temperature solid-phase method at different temperatures (x = 500, 550, 600, 650, 700, 750, and 800 °C) nanoparticles with different morphologies were synthesized by a high-temperature calcination approach using 2D Zn-HMT nanosheets as precursor. The crystal structure, morphology, specific surface areas, surface and interface properties, optical properties, and charge migration behaviors of the as-synthesized Tx-ZnO nanoparticles were characterized by powder X-ray diffraction (XRD), field-emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), high-resolution TEM (HRTEM), automatic specific surface and aperture analyzer, X-ray photoelectron spectroscopy (XPS), UV-visible spectrophotometer, photoluminescence (PL) spectra, and electrochemical impedance spectroscopy (EIS). The photocatalytic performances and stabilities of the as-synthesized typical Tx-ZnO nanoparticles with various morphologies were evaluated and compared with the commercial ZnO (CM-ZnO) nanoparticle. The T700-ZnO nanoparticle with spherical and irregular morphology exhibited the highest photocatalytic activity (99.12%) for the degradation of Rhodamine B (RhB), compared to T500-ZnO (92.32%), T600-ZnO (90.65%), T800-ZnO (44.04%), and the CM-ZnO (88.38%) nanoparticle, which can be attributed to the cooperative effects of higher crystallinity, bigger crystal size, the strongest separation efficiency, the lowest recombination rate, the fastest charge carrier transfer path, and the highest charge-transfer efficiency. The superior photocatalytic activity illustrated by the T700-ZnO nanoparticle makes it have potential application prospects for the treatment of organic wastewater.

The Properties of Microwave-Assisted Synthesis of Metal-Organic Frameworks and Their Applications

Metal-organic frameworks (MOF) are a class of porous materials with various functions based on their host-guest chemistry. Their selectivity, diffusion kinetics, and catalytic activity are influenced by their design and synthetic procedure. The synthesis of different MOFs has been of considerable interest during the past decade thanks to their various applications in the arena of sensors, catalysts, adsorption, and electronic devices. Among the different techniques for the synthesis of MOFs, such as the solvothermal, sonochemical, ionothermal, and mechanochemical processes, microwave-assisted synthesis has clinched a significant place in MOF synthesis. The main assets of microwave-assisted synthesis are the short reaction time, the fast rate of nucleation, and the modified properties of MOFs. The review encompasses the development of the microwave-assisted synthesis of MOFs, their properties, and their applications in various fields.

Catalytic selective oxidation of aromatic amines to azoxy derivatives with an ultralow loading of peroxoniobate salts

Tartaric acid-coordinated peroxoniobate salts demonstrate an exceptionally high TOF value (up to 4435 h−1) even at an ultralow catalyst loading for the oxidation of aromatic amines to azoxy compounds under green and very mild conditions.

Single Step Synthesis and Functionalization of Nano Titania for Development of Multifunctional Cotton Fabrics

Synthesis and modification of nanoparticles to make them suitable to functionalise a substrate for various application fields involves many steps, which are complex, time-consuming, and sometimes require special equipment. This is a major drawback to meet rapid technological requirements. In this work, a procedure has been developed to modify TiO₂ nanoparticles by the sol-gel method at their synthesis stage using titanium tetraisopropoxide and modifying agents including ODS and GPTMS. The prepared nanoparticle finish can be used as it is without any further processing, thus eliminating the need for extra steps required to decorate them on some substrate. The nanoparticles were characterised by SEM, EDX, FTIR, XRD, and zeta potential. The adhesion of the obtained nanoparticles was tested by applying them to a cellulosic substrate. The obtained substrate was subjected to mechanical action and adhesion efficiency was estimated on the basis of UV transmittance and antibacterial properties that showed excellent results. The hydrophobic properties of the obtained nanoparticles were assessed by measuring water contact angles, which reached 157.9°, indicating their superhydrophobic nature. The developed procedure is facile and will be suitable for the engineering of multiple surfaces.

Low Temperature Synthesis of Photocatalytic Mesoporous TiO2 Nanomaterials

We report the synthesis of mesoporous TiO2 nanostructures based on the decomposition of TiOSO4 in aqueous alkaline solution at room temperature, followed by mild thermal treatment (110 °C) in an oven and suitable to yield up to 40 g of product per batch. The duration of the thermal treatment was found to be crucial to control crystalline phase composition, specific surface area, surface chemistry and, accordingly, the photocatalytic properties of the obtained TiO2 nanocrystals. The thorough investigation of the prepared samples allowed us to explain the relationship between the structure of the obtained nanoparticles and their photocatalytic behavior, that was tested in a model reaction. In addition, the advantage of the mild treatment against a harsher calcination at 450 °C was illustrated. The proposed approach represents a facile and sustainable route to promptly access an effective photocatalyst, thus holding a significant promise for the development of solutions suitable to real technological application in environmental depollution.

Facile synthesis of TiO2/Ag3PO4 composites with co-exposed high-energy facets for efficient photodegradation of rhodamine B solution under visible light irradiation

In this study, TiO₂/Ag₃PO₄ composites based on anatase TiO₂ nanocrystals with co-exposed {101}, {010}/{100}, {001} and [111]-facets and Ag₃PO₄ microcrystals with irregular and cubic-like polyhedron morphologies were successfully synthesized by combining hydrothermal and ion-exchange methods. The anatase TiO₂ nanocrystals with different high-energy facets were controllably prepared via hydrothermal treatment of the exfoliated [Ti₄O₉]²⁻/[Ti₂O₅]²⁻ nanosheet solutions at desired pH values. The Ag₃PO₄ microcrystal with different morphologies was prepared via the ion-exchange method in the presence of AgNO₃ and NH₄H₂PO₄ at room temperature, which was used as a substrate to load the as-prepared anatase TiO₂ nanocrystals on its surface and to form TiO₂/Ag₃PO₄ heterostructures. The apparent rate constant of the pH 3.5-TiO₂/Ag₃PO₄ composite was the highest at 12.0 × 10⁻³ min⁻¹, which was approximately 1.1, 1.2, 1.4, 1.6, 13.3, and 24.0 fold higher than that of pH 0.5-TiO₂/Ag₃PO₄ (10.5 × 10⁻³ min⁻¹), pH 7.5-TiO₂/Ag₃PO₄ (10.2 × 10⁻³ min⁻¹), pH 11.5-TiO₂ (8.8 × 10⁻³ min⁻¹), Ag₃PO₄ (7.7 × 10⁻³ min⁻¹), blank sample (0.9 × 10⁻³ min⁻¹), and the commercial TiO₂ (0.5 × 10⁻³ min⁻¹), respectively. The pH 3.5-TiO₂/Ag₃PO₄ composite exhibited the highest visible-light photocatalytic activity which can be attributed to the synergistic effects of its heterostructure, relatively small crystal size, large specific surface area, good crystallinity, and co-exposed high-energy {001} and [111]-facets. The as-prepared TiO₂/Ag₃PO₄ composites still exhibited good photocatalytic activity after three successive experimental runs, indicating that they had remarkable stability. This study provides a new way for the preparation of TiO₂/Ag₃PO₄ composite semiconductor photocatalysts with high energy crystal surfaces and high photocatalytic activity.

TiO₂/Ag₃PO₄ composites with co-exposed {101}, {010}/{100}, {001} and [111]-facets were successfully synthesized by combining hydrothermal and ion-exchange methods.

Titanium Dioxide in Food Products: Quantitative Analysis Using ICP-MS and Raman Spectroscopy

Titanium dioxide (TiO₂) is commonly used as a color additive in food products. In this study, a total of 11 food products, such as a coffee cream, yogurt snack, hard candy, and chewy candy, that are widely consumed by adults or children were investigated. For characterization of particle size, size distribution, crystallinity, and concentration of TiO₂, particles were first extracted using an acid digestion method from food, and various analytical techniques were applied. All products investigated in this study contained nanosized TiO₂ particles (21.3-53.7%) in the anatase phase. The particle size of TiO₂ was in the range of 26.9-463.2 nm. The concentration of TiO₂ in the products ranged from 0.015% (150 ppm) to 0.462% (4620 ppm). These values obtained using inductively coupled plasma-mass spectrometry (ICP-MS) were considered as the reference and were compared with Raman results to evaluate the feasibility of using the Raman method to quantitate TiO₂ in food products. The Raman method developed in this study proved to effectively analyze anatase TiO₂ in food products at levels of several hundred parts per million or greater. Limitations of using the Raman method as a quick screening tool for determination of TiO₂ are also discussed.