Modulating Nanoparticle Structure by Metal-Metal Oxide Interfacial Interaction in a CeO2-Supported Bimetallic System: The Ni-Cu Case

Structure-optimized bimetallic and multicomponent catalysts often outperform single-component catalysts, inspiring a detailed investigation of metal-metal and metal-support interactions in the system. We investigated the geometric and electronic structures of ceria-supported Ni-Cu particles prepared using different metal deposition sequences employing a combination of X-ray photoelectron spectroscopy, resonant photoemission spectroscopy, and infrared reflection absorption spectroscopy. The bimetallic model catalyst structure was altered by a distinct surface evolution process determined by the metal deposition sequence. The postdeposited Cu stays on the surface of Ni predeposited CeO2 and forms only a limited Ni-Cu alloy in the Cu-contacted Ni region. However, when Ni is deposited on the Cu predeposited CeO2 surface, Ni can migrate through the Cu layer to the Cu-ceria interface and form an extended Ni-Cu alloy to the whole deposited metal layer on the ceria surface. The dynamic metal diffusion in the CeO2-supported Ni-Cu system indicates that metal-support interactions can be used to achieve the rational design of a bimetallic composition distribution during catalyst preparation.

Structure and Properties of Ultrathin SiOx Films on Cu(111)

The metal-oxide interface plays a crucial role in catalysis, and it has attracted increasing interest in recent years. Cu/SiO₂, as a common copper-based catalyst, has been widely used in industrial catalysis. However, it is still a challenge to clarify the structures of the interface of Cu-SiO_x and the effect on catalytic performance. Herein, we prepared ultrathin SiO_x films by evaporating Si onto a Cu(111) surface followed by annealing in an O₂ atmosphere, which were characterized by various surface science techniques. The results showed that a SiO_x film could grow nearly layer-by-layer on the Cu(111) surface in the present condition. Both X-ray photoelectron spectroscopy (XPS) and high-resolution electron energy loss spectroscopy (HREELS) results confirmed the presence of Cu-O-Si and Si-O-Si species. Thermal stability experiments illustrated that the well-ordered silica films were stable under annealing in vacuum. The feature of CO adsorption suggested a CO-Cu^δ+ species induced from the Cu^δ+-O-Si. Low-energy ion scattering spectroscopy (LEIS) and XPS results demonstrated that some Cu₂O appeared on the surface when the 1 ML SiO_x/Cu(111) was exposed in O₂ at 353 K.

Atomic overlayer of permeable microporous cuprous oxide on palladium promotes hydrogenation catalysis

The interfacial sites of metal-support interface have been considered to be limited to the atomic region of metal/support perimeter, despite their high importance in catalysis. By using single-crystal surface and nanocrystal as model catalysts, we now demonstrate that the overgrowth of atomic-thick Cu2O on metal readily creates a two-dimensional (2D) microporous interface with Pd to enhance the hydrogenation catalysis. With the hydrogenation confined within the 2D Cu2O/Pd interface, the catalyst exhibits outstanding activity and selectivity in the semi-hydrogenation of alkynes. Alloying Cu(0) with Pd under the overlayer is the major contributor to the enhanced activity due to the electronic modulation to weaken the H adsorption. Moreover, the boundary or defective sites on the Cu2O overlayer can be passivated by terminal alkynes, reinforcing the chemical stability of Cu2O and thus the catalytic stability toward hydrogenation. The deep understanding allows us to extend the interfacial sites far beyond the metal/support perimeter and provide new vectors for catalyst optimization through 2D interface interaction.

Revisit of XPS Studies of Supersonic O2 Molecular Adsorption on Cu(111): Copper Oxides

We report the X-ray photoemission spectroscopy (XPS) characterization of the bulk Cu₂O(111) surface and "8" and "29" oxide structures on Cu(111) prepared using a 0.5 eV O₂ supersonic molecular beam. We propose a new structural model for the "8" oxide structure and also confirm the previously proposed model for the "29" oxide structure on Cu(111), based on the O 1s XPS spectra. The detection angle dependence of the O 1s spectra supports that the nanopyramidal model is more preferable for the (√3 × √3)R30° Cu₂O(111). We also report electronic excitations that O 1s electrons suffer.

Tuning the properties of copper-based catalysts based on molecular in situ studies of model systems

Studying catalytic processes at the molecular level is extremely challenging, due to the structural and chemical complexity of the materials used as catalysts and the presence of reactants and products in the reactor's environment. The most common materials used on catalysts are transition metals and their oxides. The importance of multifunctional active sites at metal/oxide interfaces has been long recognized, but a molecular picture of them based on experimental observations is only recently emerging. The initial approach to interrogate the surface chemistry of catalysts at the molecular level consisted of studying metal single crystals as models for reactive metal centers, moving later to single crystal or well-defined thin film oxides. The natural next iteration consisted in the deposition of metal nanoparticles on well-defined oxide substrates. Metal nanoparticles contain undercoordinated sites, which are more reactive. It is also possible to create architectures where oxide nanoparticles are deposited on top of metal single crystals, denominated inverse catalysts, leading in this case to a high concentration of reactive cationic sites in direct contact with the underlying fully coordinated metal atoms. Using a second oxide as a support (host), a multifunctional configuration can be built in which both metal and oxide nanoparticles are located in close proximity. Our recent studies on copper-based catalysts are presented here as an example of the application of these complementary model systems, starting from the creation of undercoordinated sites on Cu(111) and Cu2O(111) surfaces, continuing with the formation of mixed-metal copper oxides, the synthesis of ceria nanoparticles on Cu(111) and the codeposition of Cu and ceria nanoparticles on TiO2(110). Catalysts have traditionally been characterized before or after reactions and analyzed based on static representations of surface structures. It is shown here how dynamic changes on a catalyst's chemical state and morphology can be followed during a reaction by a combination of in situ microscopy and spectroscopy. In addition to determining the active phase of a catalyst by in situ methods, the presence of weakly adsorbed surface species or intermediates generated only in the presence of reactants can be detected, allowing in turn the comparison of experimental results with first principle modeling of specific reaction mechanisms. Three reactions are used to exemplify the approach: CO oxidation (CO + 1/2O2 → CO2), water gas shift reaction (WGSR) (CO + H2O → CO2 + H2), and methanol synthesis (CO2 + 3H2 → CH3OH + H2O). During CO oxidation, the full conversion of Cu(0) to Cu(2+) deactivates an initially outstanding catalyst. This can be remedied by the formation of a TiCuOx mixed-oxide that protects the presence of active partially oxidized Cu(+) cations. It is also shown that for the WGSR a switch occurs in the reaction mechanism, going from a redox process on Cu(111) to a more efficient associative pathway at the interface of ceria nanoparticles deposited on Cu(111). Similarly, the activation of CO2 at the ceria/Cu(111) interface allows its facile hydrogenation to methanol. Our combined studies emphasize the need of searching for optimal metal/oxide interfaces, where multifunctional sites can lead to new efficient catalytic reaction pathways.

Adsorbate-driven morphological changes on Cu(111) nano-pits

Healing of a metal surface by formation of a sub-surface hydride.

CO oxidation catalyzed by Pt-embedded graphene: a first-principles investigation

The combination of reactive Pt atoms and defects over graphene makes Pt-embedded graphene a superior catalyst for low-temperature CO oxidation.