Ultralow contact resistance in organic transistors via orbital hybridization

Organic field-effect transistors (OFETs) are of interest in unconventional form of electronics. However, high-performance OFETs are currently contact-limited, which represent a major challenge toward operation in the gigahertz regime. Here, we realize ultralow total contact resistance (R_c) down to 14.0 Ω ∙ cm in C₁₀-DNTT OFETs by using transferred platinum (Pt) as contact. We observe evidence of Pt-catalyzed dehydrogenation of side alkyl chains which effectively reduces the metal-semiconductor van der Waals gap and promotes orbital hybridization. We report the ultrahigh performance OFETs, including hole mobility of 18 cm² V^-1 s^-1, saturation current of 28.8 μA/μm, subthreshold swing of 60 mV/dec, and intrinsic cutoff frequency of 0.36 GHz. We further develop resist-free transfer and patterning strategies to fabricate large-area OFET arrays, showing 100% yield and excellent variability in the transistor metrics. As alkyl chains widely exist in conjugated molecules and polymers, our strategy can potentially enhance the performance of a broad range of organic optoelectronic devices.

Mode Selective Chemistry for the Dissociation of Methane on Efficient Ni/Pt-Bimetallic Alloy Catalysts

The mode selectivity of methane dissociation is studied on three different Ni/Pt-bimetallic alloy surfaces using a fully quantum approach based on reaction path Hamiltonian. Dissociative sticking probability depends on the...

Infrared Activities of Adsorbed Species on Metal Surfaces: The Puzzle of Adsorbed Methyl (CH3)

Reflection-absorption infrared spectroscopy (RAIRS) is widely used to identify molecular adsorbates on metals during surface chemical reactions, but the interpretation of RAIRS data can be difficult with experiment alone. Here, we reveal from first-principles calculations the origin of the contrasting RAIRS spectra of methyl adsorbed on Pt(111) and Ni(111). We find that the dynamic dipole associated with the symmetric C-H stretch vibration of CH₃ along surface normal is significant on Pt(111) but negligibly small on Ni(111), explaining the strong IR activity in the former and the absence of any RAIRS peaks in the latter. This difference is correlated to different charge transfer patterns between metals and the adsorbate, which are determined by the different preferred adsorption sites of methyl on the two surfaces. This work highlights the need of electronic structure calculations in interpreting RAIRS spectra of adsorbates on metal surfaces.

Plasma-chemical promotion of catalysis for CH4 dry reforming: unveiling plasma-enabled reaction mechanisms

A kinetic study revealed that a Ni/Al2O3 catalyst exhibited a drastic increase in CH4 and CO2 conversion under nonthermal plasma when lanthanum was added to the Ni/Al2O3 catalyst as a promoter. For a better fundamental understanding of the plasma and catalyst interfacial phenomena, we employed in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) under plasma-on conditions to elucidate the nonthermal plasma-enabled reaction enhancement mechanisms. Compared with thermal catalysis, plasma-activated CO2 shows a 1.7-fold enhancement for bidentate (1560 and 1290 cm-1) and monodentate carbonate (1425 and 1345 cm-1) formation on La. Moreover, new peaks of bicarbonate (1655 cm-1) and bridge carbonate (1720 cm-1) were formed due to nonthermal plasma interactions. CO2-TPD study after thermal- and plasma-activated CO2 treatment further confirmed that plasma-activated CO2 enhances bidentate and monodentate carbonate generation with a 1.5-fold promotion at high temperature (500 °C). XRD and EDS analyses suggest that atomic-scale interaction between CO2-La and CHx-Ni is possible over the complex La-Ni-Al oxide; vibrationally excited CO2-induced carbonates provide the key to enhancing the overall performance of CH4 dry reforming at low temperature.

Quantum state and surface-site-resolved studies of methane chemisorption by vibrational spectroscopies

Infrared spectroscopic methods enable quantum-state-specific and surface-site-selective studies of methane chemisorption on stepped platinum surfaces.

Dynamics in reactions on metal surfaces: A theoretical perspective

Recent advances in theoretical characterization of reaction dynamics on metal surfaces are reviewed. It is shown that the widely available density functional theory of metals and their interactions with molecules have enabled first principles theoretical models for treating surface reaction dynamics. The new theoretical tools include methods to construct high-dimensional adiabatic potential energy surfaces, to characterize nonadiabatic processes within the electronic friction models, and to describe dynamics both quantum mechanically and classically. Three prototypical surface reactions, namely, dissociative chemisorption, Eley-Rideal reactions, and recombinative desorption, are surveyed with a focus on some representative examples. While principles governing gas phase reaction dynamics may still be applicable, the presence of the surface introduces a higher level of complexity due to strong interaction between the molecular species and metal substrate. Furthermore, most of these reactive processes are impacted by energy exchange with surface phonons and/or electron-hole pair excitations. These theoretical studies help to interpret and rationalize experimental observations and, in some cases, guide experimental explorations. Knowledge acquired in these fundamental studies is expected to impact many practical problems in a wide range of interfacial processes.

Hydrogen adsorption and desorption from Cu(111) and Cu(211)

We present a combined experimental-theoretical study on structural and coverage dependences of the adsorption and desorption of molecular hydrogen on atomically flat Cu(111) and highly stepped Cu(211) surfaces. For molecules with identical incident energy from supersonic molecular beams, we find a reduced dissociative sticking probability for the stepped surface compared to Cu(111). DFT calculations of activation barriers to dissociation for the clean and partially precovered surfaces, as well as quantitative analysis of TPD spectra, support that the A-type step of the (211) surface causes an upward shift in activation barriers to dissociation and lowering of the desorption barrier. The new data allow us to determine low sticking probabilities at conditions where King and Wells measurements fail to determine the reactivity. They are also fully consistent with the unexpected observation that monoatomic steps on a surface lower the reactivity toward the dissociation of a diatomic molecule.

Saturation of charge-induced water alignment at model membrane surfaces

The electrical charge of biological membranes and thus the resulting alignment of water molecules in response to this charge are important factors affecting membrane rigidity, transport, and reactivity. We tune the surface charge density by varying lipid composition and investigate the charge-induced alignment of water molecules using surface-specific vibrational spectroscopy and molecular dynamics simulations. At low charge densities, the alignment of water increases proportionally to the charge. However, already at moderate, physiologically relevant charge densities, water alignment starts to saturate despite the increase in the nominal surface charge. The saturation occurs in both the Stern layer, directly at the surface, and in the diffuse layer, yet for distinctly different reasons. Our results show that the soft nature of the lipid interface allows for a marked reduction of the surface potential at high surface charge density via both interfacial molecular rearrangement and permeation of monovalent ions into the interface.

Methane adsorption and dissociation on iron oxide oxygen carriers: the role of oxygen vacancies

We investigated the interaction between methane and iron oxide oxygen carrier for chemical looping reaction systems and found the oxygen vacancies can facilitate methane conversion.

Quantum dynamics of polyatomic dissociative chemisorption on transition metal surfaces: mode specificity and bond selectivity

Recent advances in quantum dynamical characterization of polyatomic dissociative chemisorption on accurate global potential energy surfaces are critically reviewed.

Cation doping size effect for methane activation on alkaline earth metal doping of the CeO2 (111) surface

Alkaline earth metal doping of CeO₂ improves the dissociative adsorption of methane with the behaviour showing a correlation to dopant ionic radius.

Oxygen vacancy promoted methane partial oxidation over iron oxide oxygen carriers in the chemical looping process

We found that oxygen vacancies can promote CH₄ partial oxidation on iron oxide oxygen carriers during the chemical looping process.

Vibrational Activation of Methane Chemisorption: The Role of Symmetry

Quantum state-resolved reactivity measurements probe the role of vibrational symmetry on the vibrational activation of the dissociative chemisorption of CH4 on Pt(111). IR-IR double resonance excitation in a molecular beam is used to prepare CH4 in all three different vibrational symmetry components A1, E, and F2 of the 2ν3 antisymmetric stretch overtone vibration. Methyl dissociation products chemisorbed on the cold Pt(111) surface are detected via reflection absorption infrared spectroscopy (RAIRS). We observe similar reactivity for CH4 prepared in the A1 and F2 sublevels but up to a factor of 2 lower reactivity for excitation of the E sublevel. It is suggested that differences in the localization of the C-H stretch amplitudes for the three states at the transition state leads to the observed difference in reactivity rather than state-specific vibrational energy transfer to electronic excitation of the metal.