Filamentous marine Gram-positive Nocardiopsis dassonvillei biofilm as biocathode and its electron transfer mechanism

This study investigated electrochemical characteristics of Gram-positive, Nocardiopsis dassonvillei B17 facultative bacterium in bioelectrochemical systems. The results demonstrated that anodic and cathodic reaction rates were catalyzed by this bacterium, especially by utilization of aluminium alloy as a substrate. Cyclic voltammogram results depicted an increase of peak current and surface area through biofilm development, confirming its importance on catalysis of redox reactions. Phenazine derivatives were detected and their electron mediating behavior was evaluated exogenously. A symmetrical redox peak in the range of -59 to -159 mV/SHE was observed in cyclic voltammogram of bacterial solution supplemented with 12 μM phenazine, a result consistent with cyclic voltammogram of a 5-d biofilm, confirming its importance as an electron mediator in extracellular electron transfer. Furthermore, the dependency of bacterial catalysis and polarization potential were studied. These results suggested that B17 biofilm behaved as a biocathode and transferred electrons to bacterial cells through a mechanism associated with electron mediators.

Geoalkalibacter halelectricus SAP-1 sp. nov. possessing extracellular electron transfer and mineral-reducing capabilities from a haloalkaline environment

The extracellular electron transfer (EET)-capable electroactive microorganisms (EAMs) play crucial roles in mineral cycling and interspecies electron transfer in different environments and are used as biocatalysts in microbial electrochemical technologies. Studying EAMs from extreme environments is desired to advance the electromicrobiology discipline, understanding their unique metabolic traits with implications to extreme microbiology, and develop specific bioelectrochemical applications. Here, we present a novel haloalkaliphilic bacterium named Geoalkalibacter halelectricus SAP-1, isolated from a microbial electroactive biofilm enriched from the haloalkaline lake sediments. It is a rod-shaped Gram-negative heterotrophic anaerobe that uses various carbon and energy sources and respires on soluble and insoluble terminal electron acceptors. Besides 16S-rRNA and whole-genome-based phylogeny, the GGDC values of 21.7 %, ANI of 78.5, and 2.77 % genomic DNA GC content difference with the closest validly named species Geoalkalibacter ferrihydriticus (DSM 17813^T ) confirmed its novelty. When grown with the solid-state electrode as the only electron acceptor, it produced 460±23 μA/cm² bioelectrocatalytic current, thereby confirming its electroactivity. Further electrochemical analysis revealed the presence of membrane redox components with high formal potentials, putatively involved in the direct mode of EET. These are distinct from EET components reported for any known electroactive microorganisms, including well-studied Geobacter spp., Shewanella spp. and Desulfuromonas acetexigens. Further the capabilities of G. halelectricus SAP-1 to respire soluble as well insoluble electron acceptors including fumarate, SO₄ ^2- , Fe³⁺ , and Mn⁴⁺ suggests its role in cycling these elements in haloalkaline environments. This article is protected by copyright. All rights reserved.

Unraveling Anaerobic Metabolisms in a Hypersaline Sediment

The knowledge on the microbial diversity inhabiting hypersaline sediments is still limited. In particular, existing data about anaerobic hypersaline archaea and bacteria are scarce and refer to a limited number of genera. The approach to obtain existing information has been almost exclusively attempting to grow every organism in axenic culture on the selected electron acceptor with a variety of electron donors. Here, a different approach has been used to interrogate the microbial community of submerged hypersaline sediment of Salitral Negro, Argentina, aiming at enriching consortia performing anaerobic respiration of different electron acceptor compounds, in which ecological associations can maximize the possibilities of successful growth. Growth of consortia was demonstrated on all offered electron acceptors, including fumarate, nitrate, sulfate, thiosulfate, dimethyl sulfoxide, and a polarized electrode. Halorubrum and Haloarcula representatives are here shown for the first time growing on lactate, using fumarate or a polarized electrode as the electron acceptor; in addition, they are shown also growing in sulfate-reducing consortia. Halorubrum representatives are for the first time shown to be growing in nitrate-reducing consortia, probably thanks to reduction of N₂O produced by other consortium members. Fumarate respiration is indeed shown for the first time supporting growth of Halanaeroarchaeum and Halorhabdus belonging to the archaea, as well as growth of Halanaerobium, Halanaerobaculum, Sporohalobacter, and Acetohalobium belonging to the bacteria. Finally, evidence is presented suggesting growth of nanohaloarchaea in anaerobic conditions.

Extremophilic electroactive microorganisms: Promising biocatalysts for bioprocessing applications

Electroactive microorganisms (EAMs) use extracellular electron transfer (EET) processes to access insoluble electron donors or acceptors in cellular respiration. These are used in developing microbial electrochemical technologies (METs) for biosensing and bioelectronics applications and the valorization of liquid and gaseous wastes. EAMs from extreme environments can be useful to overcome the existing limitations of METs operated with non-extreme microorganisms. Studying extreme EAMs is also necessary to improve understanding of respiratory processes involving EET. This article first discusses the advantages of using extreme EAMs in METs and summarizes the diversity of EAMs from different extreme environments. It is followed by a detailed discussion on their use as biocatalysts in various bioprocessing applications via bioelectrochemical systems. Finally, the challenges associated with operating METs under extreme conditions and promising research opportunities on fundamental and applied aspects of extreme EAMs are presented.

High current density via direct electron transfer by hyperthermophilic archaeon, Geoglobus acetivorans, in microbial electrolysis cells operated at 80 °C

Utilization of hyperthermophilic electro-active microorganisms in microbial electrolysis cells (MECs) that are used for hydrogen production from organic wastes offers significant advantages, such as increased reaction rate and enhanced degradation of insoluble materials. However, only a limited number of hyperthermophilic bioelectrochemical systems have been investigated so far. This study is the first to illustrate hydrogen production in hyperthermophilic MECs with a maximum rate of 0.57 ± 0.06 m³ H₂/m³d, where an iron reducing archaeon, Geoglobus acetivorans, was used as inoculum. In fact, this is the first study to report that G. acetivorans, as the fourth hyperthermophilic electro-active archaeon. In single chamber MECs operated at 80 °C with a set potential of 0.7 V, a peak current density of 1.53 ± 0.24 A/m² has been attained and this is the highest record of current produced by pure culture hyperthermophilic microorganisms. Turnover cyclic voltammetry curve illustrated a sigmoidal shape (midpoint of -0.40 V vs. Ag/AgCl), and together with linear relation of scan rate and peak anodic current, proves the biofilm attachment to the anode and its capability of direct electron transfer. Along with simple substrate (acetate), G. acetivorans effectively utilized dark fermentation effluent for hydrogen production in MECs.

Substrate salinity: A critical factor regulating the performance of microbial fuel cells, a review

Substrate salinity is a critical factor influencing microbial fuel cells (MFCs) performance and various studies have suggested that increasing substrate salinity first improves MFC performance. However, a further increase in salinity that exceeds the salinity tolerance of exoelectrogens shows negative effects because of inhibited bacterial activity and increased activation losses. In this review, electricity generation and contaminant removal from saline substrates using MFCs are summarized, and results show different optimal salinities for obtaining maximum performance. Then, electroactive bacteria capable of tolerating saline environments and strategies for improving salinity tolerance are discussed. In addition to ohmic resistance and bacterial activity, membrane resistance and catalyst performance will also be affected by substrate salinity, all of which jointly contribute the final overall MFC performance. Therefore, the combined effect of salinity is analyzed to illustrate how the MFC performance changes with increasing salinity. Finally, the challenges and perspectives of MFCs operated in saline environments are discussed.

Microbial electroactive biofilms dominated by Geoalkalibacter spp. from a highly saline-alkaline environment

Understanding of the extreme microorganisms that possess extracellular electron transfer (EET) capabilities is pivotal to advance electromicrobiology discipline and to develop niche-specific microbial electrochemistry-driven biotechnologies. Here, we report on the microbial electroactive biofilms (EABs) possessing the outward EET capabilities from a haloalkaline environment of the Lonar lake. We used the electrochemical cultivation approach to enrich haloalkaliphilic EABs under 9.5 pH and 20 g/L salinity conditions. The electrodes controlled at 0.2 V vs. Ag/AgCl yielded the best-performing biofilms in terms of maximum bioelectrocatalytic current densities of 548 ± 23 and 437 ± 17 µA/cm² with acetate and lactate substrates, respectively. Electrochemical characterization of biofilms revealed the presence of two putative redox-active moieties with the mean formal potentials of 0.183 and 0.333 V vs. Ag/AgCl, which represent the highest values reported to date for the EABs. 16S-rRNA amplicon sequencing of EABs revealed the dominance of unknown Geoalkalibacter sp. at ~80% abundance. Further investigations on the haloalkaliphilic EABs possessing EET components with high formal potentials might offer interesting research prospects in electromicrobiology.

Ammonia oxidation and denitrification in a bio-anode single-chambered microbial electrolysis cell

In this study, anodic ammonia oxidation and denitrification were performed in single-chamber bioelectrochemical systems at a wide range of anodic potentials (-400 to +400 mV) versus Ag/AgCl. The low coulombic efficiencies (~30.84%) in reactors were mainly due to electrons being transferred to atmospheric oxygen through the electrode and reversal of the electrode. The removal efficiencies of acetate, ammonia, and total nitrogen were 100%, 100%, and 40.44% at +200 mV and 100%, 100%, and 50.24% at -200 mV, respectively. The nitrogen-removal mechanisms were nitrogen respiration/nitrate reduction at +200 mV and denitrification at -200 mV, and ammonia oxidation occurred by coupling with sulfate-reducing at -300 and -400 mV. Thauera, Comamonas, Alicycliphilus, Nitrosomonas, Desulforhabdus, Dethiosulfatibacter, and Desulfomicrobium were the dominant genera at the anode which participated in the nitrification/denitrification or sulfate-reducing processes. In summary, ammonia oxidation and denitrification could be coupled with carbon-removal or sulfur-reduction using a bio-anode with a suitable anodic potential.

Electron donor availability controls scale up of anodic biofilms

The scale up of bioelectrochemical systems (BESs) is a challenging problem that limits the advancement and practical implementation of the technology. The goal of this work is to acquire an understanding of the limitations on scaling up anodic biofilms in BESs. We hypothesized that scaling up is dependent on the availability of electron donors. We tested this hypothesis by enriching anodic biofilms on electrodes of multiple sizes (15 cm² to 466 cm²) and quantified the anodic current densities while varying the electron donor concentrations. The anodic biofilms were enriched on electrodes under two conditions: (1) in raw wastewater and (2) in wastewater supplemented with 20 mM acetate. Following anodic biofilm enrichment, the current density for each electrode was quantified in artificial wastewater medium with variable COD loadings using acetate as an electron donor. Current generated using anodic biofilms scaled up at a high COD loading (1500 mg/L), while current density decreased with increasing electrode size at lower COD loadings. Further, microbial community analysis revealed that the microbial community was independent of the electrode size but dependent on the medium composition during the enrichment phase. These results provide a practical framework for the design of large-scale BESs based on laboratory-scale measurements.

Extremophiles for microbial-electrochemistry applications: A critical review

Extremophiles, notably archaea and bacteria, offer a good platform for treating industrial waste streams that were previously perceived as hostile to the model organisms in microbial electrochemical systems (MESs). Here we present a critical overview of the fundamental and applied biology aspects of halophiles and thermophiles in MESs. The current study suggests that extremophiles enable the MES operations under a seemingly harsh conditions imposed by the physical (pressure, radiation, and temperature) and geochemical extremes (oxygen levels, pH, and salinity). We highlight a need to identify the underpinning mechanisms that define the exceptional electrocatalytic performance of extremophiles in MESs.

Microbial fuel cells in saline and hypersaline environments: Advancements, challenges and future perspectives

This review is aimed to report the possibility to utilize microbial fuel cells for the treatment of saline and hypersaline solutions. An introduction to the issues related with the biological treatment of saline and hypersaline wastewater is reported, discussing the limitation that characterizes classical aerobic and anaerobic digestions. The microbial fuel cell (MFC) technology, and the possibility to be applied in the presence of high salinity, is discussed before reviewing the most recent advancements in the development of MFCs operating in saline and hypersaline conditions, with their different and interesting applications. Specifically, the research performed in the last 5years will be the main focus of this review. Finally, the future perspectives for this technology, together with the most urgent research needs, are presented.

Anolyte recycling enhanced bioelectricity generation of the buffer-free single-chamber air-cathode microbial fuel cell

Anolyte acidification is an inevitable restriction for the bioelectricity generation of buffer-free microbial fuel cells (MFCs). In this work, acidification of the buffer-free KCl anolyte has been thoroughly eliminated through anolyte recycling. The accumulated HCO₃^- concentration in the recycled KCl anolyte was above 50mM, which played as natural buffer and elevated the anolyte pH to above 8. The maximum power density (P_max) increased from 322.9mWm^-2 to 527.2mWm^-2, which is comparable with the phosphate buffered MFC. Besides Geobacter genus, the gradually increased anolyte pH and conductivity induced the growing of electrochemically active Geoalkalibacter genus, in the anode biofilm. Anolyte recycling is a feasible strategy to strengthen the self-buffering capacity of buffer-free MFCs, thoroughly eliminate the anolyte acidification and prominently enhance the electric power.

Electrical current generation in microbial electrolysis cells by hyperthermophilic archaea Ferroglobus placidus and Geoglobus ahangari

Few microorganisms have been examined for current generation under thermophilic (40-65°C) or hyperthermophilic temperatures (≥80°C) in microbial electrochemical systems. Two iron-reducing archaea from the family Archaeoglobaceae, Ferroglobus placidus and Geoglobus ahangari, showed electro-active behavior leading to current generation at hyperthermophilic temperatures in single-chamber microbial electrolysis cells (MECs). A current density (j) of 0.68±0.11A/m² was attained in F. placidus MECs at 85°C, and 0.57±0.10A/m² in G. ahangari MECs at 80°C, with an applied voltage of 0.7V. Cyclic voltammetry (CV) showed that both strains produced a sigmoidal catalytic wave, with a mid-point potential of -0.39V (vs. Ag/AgCl) for F. placidus and -0.37V for G. ahangari. The comparison of CVs using spent medium and turnover CVs, coupled with the detection of peaks at the same potentials in both turnover and non-turnover conditions, suggested that mediators were not used for electron transfer and that both archaea produced current through direct contact with the electrode. These two archaeal species, and other hyperthermophilic exoelectrogens, have the potential to broaden the applications of microbial electrochemical technologies for producing biofuels and other bioelectrochemical products under extreme environmental conditions.

Enhancing biomethanogenic treatment of fresh incineration leachate using single chambered microbial electrolysis cells

Methanogenic treatment of municipal solid waste (MSW) incineration leachate can be hindered by high concentrations of refractory organic matter and humification of compounds in the leachate. In an attempt to overcome some of these impediments, microbial electrolysis cells (MECs) were incorporated into anaerobic digesters (ADMECs). COD removal efficiencies and methane production were 8.7% and 44.3% higher in ADMECs than in controls, and ADMEC reactors recovered more readily from souring caused by high organic loading rates. The degradation rate of large macromolecules was substantially higher (96% vs 81%) in ADMEC than control effluent, suggesting that MECs stimulated degradation of refractory organic matter and reduced humification. Exoelectrogenic bacteria and microorganisms known to form syntrophic partnerships were enriched in ADMECs. These results show that ADMECs were more effective at treatment of MSW incineration leachate, and should be taken into consideration when designing future treatment facilities.

Bioelectrochemical treatment of table olive brine processing wastewater for biogas production and phenolic compounds removal

Industry of table olives is widely distributed over the Mediterranean countries and generates large volumes of processing wastewaters (TOPWs). TOPWs contain high levels of organic matter, salt, and phenolic compounds that are recalcitrant to microbial degradation. This work aims to evaluate the potential of bioelectrochemical systems to simultaneously treat real TOPWs and recover energy. The experiments were performed in potentiostatically-controlled single-chamber systems fed with real TOPW and using a moderate halophilic consortium as biocatalyst. In conventional anaerobic digestion (AD) treatment, ie. where no potential was applied, no CH4 was produced. In comparison, Bio-Electrochemical Systems (BES) showed a maximum CH4 yield of 701 ± 13 NmL CH4·LTOPW(-1) under a current density of 7.1 ± 0.4 A m(-2) and with a coulombic efficiency of 30%. Interestingly, up to 80% of the phenolic compounds found in the raw TOPW (i.e. hydroxytyrosol and tyrosol) were removed. A new theoretical degradation pathway was proposed after identification of the metabolic by-products. Consistently, microbial community analysis at the anode revealed a clear and specific enrichment in anode-respiring bacteria (ARB) from the genera Desulfuromonas and Geoalkalibacter, supporting the key role of these electroactive microorganisms. As a conclusion, bioelectrochemical systems represent a promising bioprocess alternative for the treatment and energy recovery of recalcitrant TOPWs.

Anode Biofilms of Geoalkalibacter ferrihydriticus Exhibit Electrochemical Signatures of Multiple Electron Transport Pathways

Thriving under alkaliphilic conditions, Geoalkalibacter ferrihydriticus (Glk. ferrihydriticus) provides new applications in treating alkaline waste streams as well as a possible new model organism for microbial electrochemistry. We investigated the electrochemical response of biofilms of the alkaliphilic anode-respiring bacterium (ARB) Glk. ferrihydriticus voltammetry (CV), electrochemical impedance spectroscopy (EIS), and chronoamperometry. We observed there to be at least four dominant electron transfer pathways, with their contribution to the overall current produced dependent on the set anode potential. These pathways appear to be manifested at midpoint potentials of approximately -0.14 V, -0.2 V, -0.24 V, and -0.27 V vs standard hydrogen electrode. The individual contributions of the pathways change upon equilibration from a set anode potential to another anode potential. Additionally, the contribution of each pathway to the overall current produced is reversible when the anode potential is changed back to the original set potential. The pathways involved in anode respiration in Glk. ferrihydriticus biofilms follow a similar, but more complicated, pattern as compared to those in the model ARB, Geobacter sulfurreducens. This greater diversity of electron transport pathways in Glk. ferrihydriticus could be related to its wider metabolic capability (e.g., higher pH and larger set of possible substrates, among others).

Multi-system Nernst-Michaelis-Menten model applied to bioanodes formed from sewage sludge

Bioanodes were formed under constant polarization at -0.2 V/SCE from fermented sewage sludge. Current densities reached were 9.3±1.2 A m(-2) with the whole fermented sludge and 6.2±0.9 A m(-2) with the fermented sludge supernatant. The bioanode kinetics was analysed by differentiating among the contributions of the three redox systems identified by voltammetry. Each system ensured reversible Nernstian electron transfer but around a different central potential. The global overpotential required to reach the maximum current plateau was not imposed by slow electron transfer rates but was due to the potential range covered by the different redox systems. The microbial communities of the three bioanodes were analysed by 16S rRNA gene pyrosequencing. They showed a significant microbial diversity around a core of Desulfuromonadales, the proportion of which was correlated with the electrochemical performance of the bioanodes.

Microbial characterization of anode-respiring bacteria within biofilms developed from cultures previously enriched in dissimilatory metal-reducing bacteria

This work evaluated the use of a culture enriched in DMRB as a strategy to enrich ARB on anodes. DMRB were enriched with Fe(III) as final electron acceptor and then transferred to a potentiostatically-controlled system with an anode as sole final electron acceptor. Three successive iron-enrichment cultures were carried out. The first step of enrichment revealed a successful selection of the high current-producing ARB Geoalkalibacter subterraneus. After few successive enrichment steps, the microbial community analysis in electroactive biofilms showed a significant divergence with an impact on the biofilm electroactivity. Enrichment of ARB in electroactive biofilms through the pre-selection of DMRB should therefore be carefully considered.

Methods for enrichment of novel electrochemically-active microorganisms

Electrochemically-active microorganisms (EAM) are relevant to metal biogeochemistry and have applications in microbial fuel cells (MFCs), bioremediation, and bioelectrocatalysis. Most research conducted to date focuses on EAM hailing from two distinct genera, namely Shewanella and Geobacter, with a relatively limited number of EAM discovered in recent years. This review article summarises current approaches to novel EAM enrichment, in terms of inoculum choice, growth medium, reactor configuration, electrochemical characterisation and community profiling through metagenomics and metatranscriptomics. A novel roadmap for EAM enrichment and subsequent characterisation using environmental samples as a starting material is provided in order to increase throughput and hence the likelihood of discovering novel EAM.

Possibilities for extremophilic microorganisms in microbial electrochemical systems

Microbial electrochemical systems exploit the metabolism of microorganisms to generate electrical energy or a useful product. In the past couple of decades, the application of microbial electrochemical systems has increased from the use of wastewaters to produce electricity to a versatile technology that can use numerous sources for the extraction of electrons on the one hand, while on the other hand these electrons can be used to serve an ever increasing number of functions. Extremophilic microorganisms grow in environments that are hostile to most forms of life and their utilization in microbial electrochemical systems has opened new possibilities to oxidize substrates in the anode and produce novel products in the cathode. For example, extremophiles can be used to oxidize sulfur compounds in acidic pH to remediate wastewaters, generate electrical energy from marine sediment microbial fuel cells at low temperatures, desalinate wastewaters and act as biosensors of low amounts of organic carbon. In this review, we will discuss the recent advances that have been made in using microbial catalysts under extreme conditions and show possible new routes that extremophilic microorganisms open for microbial electrochemical systems.

Long-term continuous production of H2 in a microbial electrolysis cell (MEC) treating saline wastewater

A biofilm-based 4 L two chamber microbial electrolysis cell (MEC) was continuously fed with acetate under saline conditions (35 g/L NaCl) for more than 100 days. The MEC produced a biogas highly enriched in H2 (≥90%). Both current (10.6 ± 0.2 A/m(2)Anode or 199.1 ± 4.0 A/m(3)MEC) and H2 production (201.1 ± 7.5 LH2/m(2)Cathode·d or 0.9 ± 0.0 m(3)H2/m(3)MEC·d) rates were highly significant when considering the saline operating conditions. A microbial analysis revealed an important enrichment in the anodic biofilm with five main bacterial groups: 44% Proteobacteria, 32% Bacteroidetes, 18% Firmicutes and 5% Spirochaetes and 1% Actinobacteria. Of special interest is the emergence within the Proteobacteria phylum of the recently described halophilic anode-respiring bacteria Geoalkalibacter (unk. species), with a relative abundance up to 14%. These results provide for the first time a noteworthy alternative for the treatment of saline effluents and continuous production of H2.

Genomes of Geoalkalibacter ferrihydriticus Z-0531T and Geoalkalibacter subterraneus Red1T, Two Haloalkaliphilic Metal-Reducing Deltaproteobacteria

We sequenced and annotated genomes of two haloalkaliphilic Deltaproteobacteria, Geoalkalibacter ferrihydriticus Z-0531^T (DSM 17813) and Geoalkalibacter subterraneus Red1^T (DSM 23483). During assembly, we discovered that the DSMZ stock culture of G. subterraneus was contaminated. We reisolated G. subterraneus in axenic culture and redeposited it in DSMZ and JCM.

Bio-electrocatalyzed electron efflux in Gram positive and Gram negative bacteria: an insight into disparity in electron transfer kinetics

Electron transfer (ET) behavior of bacteria varies significantly in a bio-electrocatalyzed environment based on the cell membrane.

Modelling potential/current distribution in microbial electrochemical systems shows how the optimal bioanode architecture depends on electrolyte conductivity

Modeling distribution of electrostatic potential in the a microbial electrolysis cell shows the great dependence of the optimal design on the ionic conductivity of the medium.

Electroanalysis of microbial anodes for bioelectrochemical systems: basics, progress and perspectives

Over about the last ten years, microbial anodes have been the subject of a huge number of fundamental studies dealing with an increasing variety of possible application domains.