Detailed Structural Study on the Poly(vinyl alcohol) Adsorption Layers on a Si Substrate with Solvent Vapor-Induced Swelling

We investigated in detail the structures in the poly(vinyl alcohol) (PVA) adsorption layers on a Si substrate, which remained on the substrate after immersing the relatively thick 30-50 nm films in hot water, by neutron reflectometry under humid conditions. For the PVA with a degree of saponification exceeding 98 mol %, the adsorption layer exhibits a three-layered structure in the thickness direction. The bottom layer is considered to be the so-called inner adsorption layer that is not fully swollen with water vapor. This may be because the polymer chains in the inner adsorption layer are strongly constrained onto the substrate, which inhibits water vapor penetration. The polymer chains in this layer have many contact points to the substrate via the hydrogen bonding between the hydroxyl groups in the polymer chain and the silanol groups on the surface of the Si substrate and consequently exhibit extremely slow dynamics. Therefore, it is inferred that the bottom layer is fully amorphous. Furthermore, we consider the middle layer to be somewhat amorphous because parts of the molecular chains are pinned below the interface between the middle and bottom layers. The molecular chains in the top layer become more mobile and ordered, owing to the large distance from the strongly constrained bottom layer; therefore, they exhibit a much lower degree of swelling compared to the middle amorphous layer. Meanwhile, for the PVA with a much lower degree of saponification, the adsorption layer structure consists of the two-layers. The bottom layer forms the inner adsorption layer that moderately swells with water vapor because the polymer chains have few contact points to the substrate. The molecular chains in the middle layer, therefore, are somewhat crystallizable because of this weak constraint.

Elucidation of a Heterogeneous Layered Structure in the Thickness Direction of Poly(vinyl alcohol) Films with Solvent Vapor-Induced Swelling

We investigated the swelling behaviors of poly(vinyl alcohol) (PVA) films deposited on Si wafers with water vapor, which is a good solvent for PVA for elucidating structural and dynamical heterogeneities in the film thickness direction. Using deuterated water vapor, structural and dynamical differences in the thickness direction can be detected easily as different degrees of swelling in the thickness direction by neutron reflectivity. Consequently, the PVA film with a degree of saponification exceeding 98 mol % exhibits a three-layered structure in the thickness direction. It is considered that an adsorption layer consisting of molecular chains that are strongly adsorbed onto the solid substrate is formed at the interface with the substrate, which is not swollen with water vapor compared with the bulk-like layer above it. The adsorption layer is considered to exhibit significantly slower dynamics than the bulk. Furthermore, a surface layer that swells excessively compared with the underneath bulk-like layer is found. This excess swelling of the surface layer may be related to a higher mobility of the molecular chains or lower crystallinity at the surface region compared to the underneath bulk-like layer. Meanwhile, for the PVA film with a much lower degree of saponification, a thin layer with a slightly lower degree of swelling than the bulk-like layer above it can be detected at the interface between the film and substrate only under a high humidity condition. This layer is considered to be the adsorption layer composed of molecular chains loosely adsorbed onto the Si substrate.

Using sonochemistry for the production of poly(vinyl alcohol)/MWCNT–vitamin B1 nanocomposites: exploration of morphology, thermal and mechanical properties

Functionalized MWCNTs with vitamin B₁ as a green material were applied for the enhancement of poly(vinyl alcohol) properties.

Unraveling the sub-nanoscopic structure at interphase in a poly(vinyl alcohol)-MOF nanocomposite, and its role in thermo-mechanical properties

A microscopic model of the interfacial region is required to improve understanding of the role of local structure in bulk physical properties in metal organic framework-based polymer nanocomposites. A zeolitic imidazolate framework (ZIF-8)-based (loading 2-30 wt%) composite of poly vinyl alcohol (PVA) is studied as a model system to investigate the role of interfacial interaction in molecular packing, glass transition process and tensile properties. Attractive interfacial interaction between the surface of ZIF particles and PVA chains is established by Fourier transform infra red (FTIR) measurements. The morphology of the nanocomposites is characterized using X-ray diffraction and scanning electron microscopy (SEM), showing that aggregation of particles started from 5 wt% of ZIF-8. At low loadings, occurrence of two glass transitions measured using differential scanning calorimetry indicates two spatial zones, viz. interphase and bulk layers, of different packing density in the PVA matrix. With increase in loading, molecular packing throughout the polymer matrix is changed as the interparticle distance and interphase width become comparable. At the highest loading, PVA shows bulk glass transition temperature because of the non-significant volume fraction of interphase resulting from aggregation of ZIF. Molecular packing (free volume structure) of PVA in the nanocomposites is investigated using ortho-positronium lifetime distributions, which show that large vacant spaces are created at the interfacial region leading to a low-density interphase. The existence of a low-density interphase is also supported by bulk-density measurements of the nanocomposites. Tensile testing measurements show a decrease in ductility of the nanocomposites, indicating enhancement in rigidity of polymer chains at the interfacial region because of attractive interfacial interaction. This study indicates that the polymer chain framework at the interfacial region in PVA-MOF nanocomposites can be represented by a rigid but rather open network.

Investigation of free volume characteristics of the interfacial layer in poly(methyl methacrylate)–alumina nanocomposite and its role in thermal behaviour

A denser interfacial layer with smaller size nanoholes and narrower size distribution around alumina particles in PMMA–alumina composites.

Graphene networks and their influence on free-volume properties of graphene–epoxidized natural rubber composites with a segregated structure: rheological and positron annihilation studies

The motion of ENR chains is retarded by the geometric confinement of “GE networks”, producing a high-density interfacial region in the vicinity of GE nanoplatelets.

Effects of the molecular level dispersion of graphene oxide on the free volume characteristics of poly(vinyl alcohol) and its impact on the thermal and mechanical properties of their nanocomposites

The effects of the molecular dispersion of graphene oxide on (A) the crystallinity of PVA–GO nanocomposite films and (B) nanohole size distribution in the amorphous region of PVA–GO nanocomposite films.