Red and near-infrared light-activated photoelectrochemical nanobiosensors for biomedical target detection

Photoelectrochemical (PEC) nanobiosensors integrate molecular (bio)recognition elements with semiconductor/plasmonic photoactive nanomaterials to produce measurable signals after light-induced reactions. Recent advancements in PEC nanobiosensors, using light-matter interactions, have significantly improved sensitivity, specificity, and signal-to-noise ratio in detecting (bio)analytes. Tunable nanomaterials activated by a wide spectral radiation window coupled to electrochemical transduction platforms have further improved detection by stabilizing and amplifying electrical signals. This work reviews PEC biosensors based on nanomaterials like metal oxides, carbon nitrides, quantum dots, and transition metal chalcogenides (TMCs), showing their superior optoelectronic properties and analytical performance for the detection of clinically relevant biomarkers. Furthermore, it highlights the innovative role of red light and NIR-activated PEC nanobiosensors in enhancing charge transfer processes, protecting them from biomolecule photodamage in vitro and in vivo applications. Overall, advances in PEC detection systems have the potential to revolutionize rapid and accurate measurements in clinical diagnostic applications. Their integration into miniaturized devices also supports the development of portable, easy-to-use diagnostic tools, facilitating point-of-care (POC) testing solutions and real-time monitoring.

ZnO:CuO Composites Obtained by Rapid Joule Heating for Photocatalysis

Semiconductor oxides belonging to various families are ideal candidates for application in photocatalytic processes. One of the challenges facing photocatalytic processes today is improving their efficiency under sunlight irradiation. In this study, the growth and characterization of semiconductor oxide nanostructures and composites based on the ZnO and CuO families are proposed. The selected growth method is the resistive heating of Zn and Cu wires to produce the corresponding oxides, combined with galvanic corrosion of Zn. An exhaustive characterization of the materials obtained has been carried out using techniques based on scanning electron microscopy and optical spectroscopies. The method we have followed and the conditions used in this study present promising results, not only from a degradation efficiency point of view but also because it is a cheap, easy, and fast growth method. These characteristics are essential in order to scale the process beyond the laboratory.

Ag/ZnO microcavities with high sensitivity and self-cleaning properties for fast repetitive SERS detection

A SERS substrate with high sensitivity and reusability was proposed. The chip consists of multiple ZnO microcavities loaded with silver particles. Based on structural characteristics, this coupling between cavity modes and localized surface plasmon modes can highly localize the electric field, where experimental results revealed a detection limit of 10-11 M for R6G. In addition, during carrier control in semiconductors with localized electromagnetic fields, our substrate also exhibits high self-cleaning efficiency and in situ detection stability. Even in a dry environment, it exhibits excellent light-mediated cleaning ability across multiple reuse test cycles. The convenient, rinse-free substrate, with its cost-effective and sustainable features, shows great promise for the study on detection and degradation of active materials.

Label-free colorimetric analysis strategies based on adsorption-responsive surface-enhanced photochromic phenomena of tungsten(VI) oxide nanoparticles for amino acids

Herein, we present a colorimetric detection method based on the surface-enhanced photochromic phenomenon of tungsten (VI) oxide (WO3) nanocolloid particles for α-amino acid (AA) molecules, including L-aspartic acid (Asp), L-glutamic acid (Glu), L-histidine (His), L-isoleucine (Ile), L-leucine (Leu), L-lysine (Lys), L-phenylalanine (Phe), and L-valine (Val). The UV-induced photochromic phenomena in the AA/WO3 binary aqueous systems were investigated using UV-Vis absorption spectrometry. The adsorption properties of the AA molecules on the surface of the WO3 nanocolloid particles have been identified using a combination of adsorption isotherm analysis and attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy. A good linear correlation between the concentration of the AAs adsorbed on the surface of the WO3 nanocolloid particles and the initial photochromic coloration rate in the corresponding UV-irradiated WO3 colloidal aqueous solution was obtained with over three orders of magnitude, indicating that the surface-enhanced photochromic phenomenon of the WO3 nanocolloid particle can be used to detect the AA molecules. In addition, based on the results of the UV-Vis absorption, ATR-FTIR, and adsorption isotherm analyses, we have experimentally demonstrated that the AA/WO3 binary aqueous system with inner-sphere adsorbed Ile, Leu, Lys, or Val molecules on the surface of the WO3 nanocolloid particles exhibits a more significant surface-enhanced photochromic phenomenon than the system with outer-sphere adsorbed Asp, Glu, His, or Phe molecules. The strong inner-sphere adsorption of the AA molecules successfully improved the limit of detection. This study provides valuable insights into a "label-free" colorimetric assay system based on the surface-enhanced photochromic phenomenon of the WO3 nanocolloid probe.

Advanced photocatalytic materials based degradation of micropollutants and their use in hydrogen production - a review

The use of pharmaceuticals, dyes, and pesticides in modern healthcare and agriculture, along with expanding industrialization, heavily contaminates aquatic environments. This leads to severe carcinogenic implications and critical health issues in living organisms. The photocatalytic methods provide an eco-friendly solution to mitigate the energy crisis and environmental pollution. Sunlight-driven photocatalytic wastewater treatment contributes to hydrogen production and valuable product generation. The removal of contaminants from wastewater through photocatalysis is a highly efficient method for enhancing the ecosystem and plays a crucial role in the dual-functional photocatalysis process. In this review, a wide range of catalysts are discussed, including heterojunction photocatalysts and various hybrid semiconductor photocatalysts like metal oxides, semiconductor adsorbents, and dual semiconductor photocatalysts, which are crucial in this dual function of degradation and green fuel production. The effects of micropollutants in the ecosystem, degradation efficacy of multi-component photocatalysts such as single-component, two-component, three-component, and four-component photocatalysts were discussed. Dual-functional photocatalysis stands out as an energy-efficient and cost-effective method. We have explored the challenges and difficulties associated with dual-functional photocatalysts. Multicomponent photocatalysts demonstrate superior efficiency in degrading pollutants and producing hydrogen compared to their single-component counterparts. Dual-functional photocatalysts, incorporating TiO2, g-C3N4, CeO2, metal organic frameworks (MOFs), layered double hydroxides (LDHs), and carbon quantum dots (CQDs)-based composites, exhibit remarkable performance. The future of synergistic photocatalysis envisions large-scale production facilitate integrating advanced 2D and 3D semiconductor photocatalysts, presenting a promising avenue for sustainable and efficient pollutant degradation and hydrogen production from environmental remediation technologies.

Surface Reconstruction on Metal Nitride during Photo-oxidation

The efficient conversion and storage of solar energy for chemical fuel production presents a challenge in sustainable energy technologies. Metal nitrides (MNs) possess unique structures that make them multi-functional catalysts for water splitting. However, the thermodynamic instability of MNs often results in the formation of surface oxide layers and ambiguous reaction mechanisms. Herein, we present on the photo-induced reconstruction of a Mo-rich@Co-rich bi-layer on ternary cobalt-molybdenum nitride (Co3 Mo3 N) surfaces, resulting in improved effectiveness for solar water splitting. During a photo-oxidation process, the uniform initial surface oxide layer is reconstructed into an amorphous Co-rich oxide surface layer and a subsurface Mo-N layer. The Co-rich outer layer provides active sites for photocatalytic oxygen evolution reaction (POER), while the Mo-rich sublayer promotes charge transfer and enhances the oxidation resistance of Co3 Mo3 N. Additionally, the surface reconstruction yields a shortened Co-Mo bond length, weakening the adsorption of hydrogen and resulting in improved performance for both photocatalytic hydrogen evolution reaction (PHER) and POER. This work provides insight into the surface structure-to-activity relationships of MNs in solar energy conversion, and is expected to have significant implications for the design of metal nitride-based catalysts in sustainable energy technologies.

Metal-organic framework-based S-scheme heterojunction photocatalysts

Photocatalysis is a promising technology to resolve energy and environmental issues, where the design of high-efficiency photocatalysts is the central task. As an emerging family of photocatalysts, semiconducting metal-organic frameworks (MOFs) with remarkable features have demonstrated great potential in various photocatalytic fields. Compared to MOF-based photocatalysts with a single component, construction of S-scheme heterojunctions can render MOFs with enhanced charge separation, redox capacity and solar energy utilization, and thus improved photocatalytic performance. Herein, an overview of the recent advances in the design of MOF-based S-scheme heterojunctions for photocatalytic applications is provided. The basic principle of S-scheme heterojunctions is introduced. Then, three types of MOF-based S-scheme heterojunctions with different compositions are systematically summarized including MOF/non-MOF, MOF-on-MOF and MOF-derived heterojunctions. Afterwards, the enhanced performances of MOF-based S-scheme heterojunctions in hydrogen production, CO2 reduction, C-H functionalization, H2O2 production and wastewater treatment are highlighted. Lastly, the current challenges and future prospects regarding the design and applications of MOF-based S-scheme heterojunctions are discussed to inspire the further development of this emerging field.

High-throughput experimentation for photocatalytic water purification in practical environments

High-throughput screening instrument was developed for photocatalytic water purification, enabling the simultaneous testing of 132 photocatalytic reactions under uniform visible light irradiation, temperature control, and stirring. The instrument was used to investigate the effects of different catalysts (TiO2, ZnO, α-Fe2O3) and environmental waters (seawater, urban wastewater, and industrial wastewater) on dye degradation. It was observed environmental ions, particularly carbonate and phosphate ions, significantly reduced catalyst activity by inhibiting the adsorption of dye molecules. To develop effective catalysts for dye degradation in industrial wastewater, 15 types of noble metal nanoparticles (NPs) were supported on photocatalysts. The study found that noble metal NPs with high work functions and oxidation resistance, such as Au and Pt, exhibited higher activity even in the industrial wastewater, likely converting environmental ions into active species. These findings, based on 432 test results, demonstrate the effectiveness of the developed high-throughput screening instrument for optimizing photocatalytic water purification.

Combined Analyses on Electronic Structure and Molecular Orbitals of d10 Bimetal Oxide In2Ge2O7 and Photocatalytic Performances for Overall Water Splitting and CO2 Reduction

Semiconducting photocatalytic overall water splitting and CO2 reduction are possible solutions to the emerging worldwide challenges of oil shortage and continual temperature increase, and the key is to develop an efficient photocatalyst. Most photocatalysts contain the d0, d10 or d10ns2 metals, and a guiding principle is desired to help to distinguish outstanding semiconductors. Here, the d10 bimetal oxide In2Ge2O7 was selected as the target. First, density functional theory (DFT) calculations point out that the nonbonding O 2p orbitals dominate the valence band maximum (VBM), and In 5s-O 2s and Ge 4s-O 2s antibonding orbitals are the major components of conduction band minimum (CBM). Moreover, the molecular orbitals were analyzed to consolidate the DFT calculations and make it more understandable for chemists. Due to the very small specific surface area (0.51 m2/g) and wide band gap (4.14 eV), as-prepared In2Ge2O7 did not exhibit any overall water splitting activity; nevertheless, when loading with 1 wt% cocatalyst (i.e., Pt, Pd), the surficial charge recombination can be greatly eliminated and the overall water splitting activity is significantly improved to 33.0(4) and 17.2(7) μmol/h for H2 and O2 generation, respectively. The apparent quantum yield (AQY) at 254 nm is 8.28%. This observation is proof that the inherent electronic structure of In2Ge2O7 is beneficial for the charge migration in bulk. Moreover, this catalyst also exhibits an observable CO2 reduction activity in pure water, which is a competition reaction with water splitting, anyway, the CH4 selectivity can be enhanced by loading Pd. This is a successful attempt to unravel the structure-property relationship by combining the analyses on electronic structure and molecular orbitals and is enlightening to further discover good candidates to photocatalysts.

Mesoporous black TiO2 hollow shells with controlled cavity size for enhanced visible light photocatalysis

Black TiO2 formed by introducing lattice disorder into pristine TiO2 has a narrowed band gap and suppresses the recombination of charge carriers. This provides a potential strategy for visible light photocatalysis. However, the microstructural design of black TiO2 for a higher optimization of visible light is still in high demand. In this work, we proposed the preparation of black TiO2 hollow shells with controllable cavity diameters using silica spheres as templates for the cavities and the NaBH4 reduction method. The decreased cavity size resulted in a hollow shell with an enhanced visible-light absorption and improved photocatalytic performance. Moreover, we demonstrated that this cavity can be combined with gold nanoparticles (AuNPs) to form AuNPs@black TiO2 yolk-shells. The AuNPs provided additional visible light absorption and promoted the separation of photogenerated carriers in the yolk-shell structures. This further improved the photocatalysis, the degradation rate of Cr(VI) can reach 0.066 min-1. Our work evaluated the effect of the cavity size on the photocatalytic performance of hollow and yolk-shell structures and provided concepts for the further enhancement of visible-light photocatalysis.

Construction of Ag-TiO2 Hierarchical Micro-/Nanostructures on a Ti Plate for Photocatalysts via Femtosecond Laser Hybrid Technology

Titanium dioxide photocatalysts can break down pollutants using natural light. They possess notable light stability, chemical stability, and catalytic effects, thus leading to extensive research worldwide. However, the limited light absorption range of titanium dioxide and their inefficiencies in generating and transporting photogenerated carriers hinder the enhancement of their photocatalytic performance. In this study, we employ a femtosecond laser composite processing method to create an Ag-TiO2 nanoplate composite catalyst. This method doubles the catalytic efficiency compared with the structure processed solely with the femtosecond laser. The resulting Ag-TiO2 nanoplate composite catalysts show significant promise for addressing environmental and energy challenges, including the photodegradation of organic pollutants.

Atmospheric Pressure Plasma Deposition of Hybrid Nanocomposite Coatings Containing TiO2 and Carbon-Based Nanomaterials

Among the different applications of TiO₂, its use for the photocatalytic abatement of organic pollutants has been demonstrated particularly relevant. However, the wide band gap (3.2 eV), which requires UV irradiation for activation, and the fast electron-hole recombination rate of this n-type semiconductor limit its photocatalytic performance. A strategy to overcome these limitations relies on the realization of a nanocomposite that combines TiO₂ nanoparticles with carbon-based nanomaterials, such as rGO (reduced graphene oxide) and fullerene (C₆₀). On the other hand, the design and realization of coatings formed of such TiO₂-based nanocomposite coatings are essential to make them suitable for their technological applications, including those in the environmental field. In this work, aerosol-assisted atmospheric pressure plasma deposition of nanocomposite coatings containing both TiO₂ nanoparticles and carbon-based nanomaterials, as rGO or C₆₀, in a siloxane matrix is reported. The chemical composition and morphology of the deposited films were investigated for the different types of prepared nanocomposites by means of FT-IR, FEG-SEM, and TEM analyses. The photocatalytic activity of the nanocomposite coatings was evaluated through monitoring the photodegradation of methylene blue (MB) as a model organic pollutant. Results demonstrate that the nanocomposite coatings embedding rGO or C₆₀ show enhanced photocatalytic performance with respect to the TiO₂ counterpart. In particular, TiO₂/C₆₀ nanocomposites allow to achieve 85% MB degradation upon 180 min of UV irradiation.

Preparation of carnation-like Ag-ZnO composites for enhanced photocatalysis under visible light

Carnation-like ZnO was synthesized by the facile precipitation method (at room temperature and in 120 min) to decompose dyes in an aqueous medium. The carnation-like ZnO had a stratified porous structure with a size of about 2-3μm, its petals had a smooth surface with a thickness of 5-10 nm and a width of about 300-500 nm. Ag-ZnO composites were synthesized using glucose with the assistance of PVP. The morphology of Ag-ZnO composites was almost unchanged compared to ZnO. Where, the Ag nanoparticles in the size range of 5-15 nm were uniformly dispersed on the ZnO petals, improving the catalytic ability of the composites in tartrazine (TA) degradation. The influence of Ag content on catalytic structure and performance of composite was studied. The 5Ag-ZnO sample had the highest BET surface area and pore volume and the lowest gap energy (Eg) among the as-synthesized samples. The 5Ag-ZnO sample proclaimed the degradation efficiency in 70 min of 97.8% and thek_apof 0.031 min^-1. The influences of catalyst content, solution pH, and concentration of dye on the photodegradation efficiency of the composite were thoroughly studied. Besides, the photocatalytic activity of the composite was demonstrated by degrading various organic substances and reusability. In addition, it was compared to a metal-semiconductor catalyst of Au-ZnO and semiconductor-semiconductor catalysts of MoS₂-ZnO, Cu₂O-ZnO, and SiO₂-ZnO. The catalytic mechanism under visible light was proposed.

Deciphering the photocatalytic hydrogen generation process of Fresnoite Ba2TiGe2O8 by electronic structure and bond analyses

In addition to enhancing the activity of already-known photocatalysts, developing new ones is always desired in photocatalysis, giving more opportunities to approach practical applications. Most photocatalysts are composed of d⁰ (i.e. Sc³⁺, Ti⁴⁺, Zr⁴⁺) and/or d¹⁰ (i.e. Zn²⁺, Ga³⁺, In³⁺) metal cations, and a new target catalyst is Ba₂TiGe₂O₈ containing both. Experimentally, it exhibits a UV-driven catalytic H₂ generation rate of 0.5(1) μmol h^-1 in methanol aqueous solution, which could be enhanced to 5.4(1) μmol h^-1 by loading 1 wt% Pt as the cocatalyst. Most interestingly, theoretical calculations together with analyses on the covalent network could help us to decipher the photocatalytic process. The electrons in O 2p non-bonding orbitals are photo-excited to either Ti-O or Ge-O anti-bonding orbitals. The latter interconnect with each other to form an infinite two-dimensional network for electron migration to the catalyst surface, while the Ti-O anti-boding orbitals are rather localized because of the Ti⁴⁺ 3d orbitals; thus, those photo-excited electrons mostly recombine with holes. This study on Ba₂TiGe₂O₈ containing both d⁰ and d¹⁰ metal cations gives an interesting comparison, suggesting that a d¹⁰ metal cation is probably more useful to construct a favorable conduction band minimum for the migration of photo-excited electrons.

Exploiting the LSPR effect for an enhanced photocatalytic hydrogen evolution reaction

Incorporation of plasmonic metals is one of the most widely adopted strategies for improving the photocatalytic hydrogen evolution reaction (HER) activity of semiconductor photocatalysts. This article summarizes recent advances in the development of plasmonic metal-semiconductor photocatalysts and four localized surface plasmon resonance (LSPR) driven mechanisms by which plasmonic metal nanoparticles can contribute to enhancement of HER activity. In addition, principles for maximizing the contribution of these LSPR driven mechanisms are highlighted to provide insights for future design of plasmonic metal-semiconductor photocatalysts with enhanced HER activity.

Construction of Z-Scheme TiO2/Au/BDD Electrodes for an Enhanced Electrocatalytic Performance

TiO₂/Au/BDD composites with a Z-scheme structure was prepared by orderly depositing gold (Au) and titanium dioxide (TiO₂) on the surface of a boron-doped diamond (BDD) film using sputtering and electrophoretic deposition methods. It was found that the introduction of Au between TiO₂ and the BDD, not only could reduce their contact resistance, to increase the carrier transport efficiency, but also could improve the surface Hall mobility of the BDD electrode. Meanwhile, the designed Z-scheme structure provided a fast channel for the electrons and holes combination, to promote the effective separation of the electrons and holes produced in TiO₂ and the BDD under photoirradiation. The electrochemical characterization elucidated that these modifications of the structure obviously enhanced the electrocatalytic performance of the electrode, which was further verified by the simulated wastewater degradation experiments with reactive brilliant red X-3B. In addition, it was also found that the photoirradiation effectively enhanced the pollution degradation efficiency of the modified electrode, especially for the TiO₂/Au/BDD-30 electrode.

Understanding Wavelength-Dependent Synergies between Morphology and Photonic Design in TiO2-Based Solar Powered Redox Cells

Solar powered redox cells (SPRCs) are promising for large-scale and long-term storage of solar-energy, particularly when coupled with redox flow batteries (RFBs). While efforts have primarily focused on heterostructure engineering, the potential of synergistic morphology and photonic design has not been carefully studied. Here, we investigate the wavelength-dependent effects of light-absorption and charge transfer characteristics on the performance of gold decorated TiO₂-based SPRC photoanodes operating with RFB-compatible redox couples. Through an in-depth optical and photoelectrochemical characterization of three complementary TiO₂ microstructures, namely nanotubes, honeycombs, and nanoparticles, we elucidate the combined effects of nanometer-scale semiconductor morphology and plasmonic design across the visible spectrum. In particular, thin-walled TiO₂ nanotubes exhibit a ∼ 50% increase in solar-to-chemical efficiency (STC) compared to thick-walled TiO₂ honeycombs thanks to improved charge transfer. Au nanoparticles both increase generation and interfacial charge transfer (above bandgap) and promote hot carrier injection (below bandgap) leading to a further 25% increase in STC. Overall, Au/TiO₂ nanotubes achieve a high photocurrent at 0.098 mA/cm² and an excellent STC of 0.06%, among the highest with respect to the theoretical limit. The incident photon to current efficiency and internal quantum efficiency are also superior to those of bare TiO₂ showing maximum values of 54.7% and 67%, respectively. Overall, nanophotonic engineering that synergistically combines morphology optimization and plasmonic sensitization schemes offer new avenues for improving rechargeable solar-energy technologies such as solar redox flow batteries.

Plasmonic Metal Mediated Charge Transfer in Stacked Core-Shell Semiconductor Heterojunction for Significantly Enhanced CO2 Photoreduction

Construction of core-shell semiconductor heterojunctions and plasmonic metal/semiconductor heterostructures represents two promising routes to improved light harvesting and promoted charge separation, but their photocatalytic activities are respectively limited by sluggish consumption of charge carriers confined in the cores, and contradictory migration directions of plasmon-induced hot electrons and semiconductor-generated electrons. Herein, a semiconductor/metal/semiconductor stacked core-shell design is demonstrated to overcome these limitations and significantly boost the photoactivity in CO₂  reduction. In this smart design, sandwiched Au serves as a "stone", which "kills two birds" by inducing localized surface plasmon resonance for hot electron generation and mediating unidirectional transmission of conduction band electrons and hot electrons from TiO₂  core to MoS₂  shell. Meanwhile, upward band bending of TiO₂  drives core-to-shell migration of holes through TiO₂ -MoS₂  interface. The co-existence of TiO₂  → Au → MoS₂  electron flow and TiO₂  → MoS₂  hole flow contributes to spatial charge separation on different locations of MoS₂  outer layer for overall redox reactions. Additionally, reduction potential of photoelectrons participating in the CO₂  reduction is elaborately adjusted by tuning the thickness of MoS₂  shell, and thus the product selectivity is delicately regulated. This work provides fresh hints for rationally controlling the charge transfer pathways toward high-efficiency CO₂  photoreduction.

Catalytic degradation of methylene blue by biosynthesized Au nanoparticles on titanium dioxide (Au@TiO2)

The degradation of methylene blue is a critical procedure in its wastewater remediation and thus has inspired wide catalysis research with semiconductors such as titanium dioxide (TiO₂) and rare metals such as gold (Au). In this study, we report bacterial cells assisting biosynthesis for Au@TiO₂ as an efficient catalyst for the catalytic degradation of methylene blue. Multiple complementary characterization for bio-Au_x@TiO₂ evidenced the evenly distributed Au nanoparticles (NPs) on the bio-TiO₂ layers. Meanwhile, bio-Au₂@TiO₂ displayed the superior catalytic activity in the degradation of methylene blue with the highest kinetics constant (k_app) value of 0.195 min^-1. In addition, bio-Au₂@TiO₂ keeps stable catalytic activity for up to 10 cycles. The origin of the catalytic activity was investigated by the hydroxyl radical fluorescence quantitative analysis and optical band gap analysis. In the bio-Au₂@TiO₂ catalytic system, Au NPs decreased the band gap energy of TiO₂ and enabled the generation of abundant photogeneration hydroxyl radicals, resulting in an enhanced photocatalytic activity. Our microbial synthesized bio-TiO₂ and bio-Au_x@TiO₂ study would be useful for developing green synthesis catalyst technology.

Inactivation of mammalian spermatozoa on the exposure of TiO2 nanorods deposited with noble metals

Titanium dioxide (TiO₂) nanorods (NRs) are well-known semiconducting and catalytic material that has been widely applied, but their toxicities have also attracted recent interest. In this study, we investigated and compared the toxic effects of TiO₂ NRs and TiO₂ NRs loaded with Ag or Au NPs on boar spermatozoa. As a result, sperm incubated with Ag-TiO₂ NRs showed lower motility than sperm incubated with controls (with or without TiO₂ NRs) or Au-TiO₂ NRs. In addition, sperm viability and acrosomal integrity were defective in the presence of Ag-TiO₂ NRs, and the generation of intracellular reactive oxygen species (ROS) increased significantly when spermatozoa were incubated with 20 μg/ml Ag-TiO₂ NRs. We discussed in depth the charge transfer mechanism between enzymatic NADPH and Ag-TiO₂ NRs in the context of ROS generation in spermatozoa. The effects we observed reflected the fertilization competence of sperm incubated with Ag-TiO₂ NRs; specifically sperm penetration and embryonic development rates by in vitro fertilization were reduced by Ag-TiO₂ NRs. To summarize, our findings indicate that exposure to Ag-TiO₂ NRs could affect male fertilization fecundity and caution that care be exercised when using these NRs.

Optimizing the shape anisotropy of gold nanoparticles for enhanced light harvesting and photocatalytic applications

Hybrid nanoparticles (NP) of bismutite nanodisks (BSC ND) with gold nanoparticles (Au NP) of different aspect ratios (AR), such as spheres, rods and etched rods were synthesized via a facile sonochemical method. To better control the shapes of Au NP deposited on the substrate, these were pre-synthesized prior to the deposition using a modified seed mediated growth method by altering the pH and supersaturation of the growth solution. The shift in the peak position and shape of the localized surface plasmon resonance (LSPR) absorption band associated with fine-tuning of the shape of Au NP, led to enhanced light harvesting capabilities of the hybrid. Introducing shape anisotropy in the NP brought about narrowing of bandgap and lowering of PL intensity in the hybrids, suggesting better electronic contact of the NP with BSC, and effective suppression of recombination effects. Hybrids of BSC with Au nanorods showed 14% improved degradation of methylene blue (MB) dye compared to the hybrids with nanospheres. With this study, we provide a novel promising strategy to maximize the light harvesting capacity of semiconductors by tailoring the AR of Au NP, for improved solar to chemical energy conversion.

Graphical abstract

Recent progress of Ga-based liquid metals in catalysis

Within the last decade, the application of gallium-based liquid metals in catalysis has received great attention from around the world. This article provides an overview concerning Ga-based liquid metals (LMs) in energy and environmental applications, such as the catalytic synthesis of ethylene by non-petroleum routes via Pd-Ga liquid catalysts, alkane dehydrogenation via Pd-Ga or Pt-Ga catalysts, CO2 hydrogenation to methanol via Ni Ga or Pd/Ga2O3 catalysts, and catalytic degradation of CO2 via EGaIn liquid metal catalysts below 500 °C, where Ga-based liquid metal catalysts exhibit high selectivity and low energy consumption. The formation of isolated metal sites in a liquid metal matrix allows the integration of several characteristics of multiphase catalysis (particularly the operational friendliness of product separation procedures) with those of homogeneous catalysis. In the end, this article sheds light on future prospects, opportunities, and challenges of liquid metal catalysis.

Removal of PFASs from water by carbon-based composite photocatalysis with adsorption and catalytic properties: A review

Per- and polyfluoroalkyl substances (PFASs) are a class of persistent organic pollutants widely distributed in aquatic environments. The adsorption and photocatalytic methods have been widely used to remove PFASs in water because of their respective advantages. Still, they have apparent defects when used alone. Therefore, the adsorption and photocatalytic technologies are combined through suitable preparation methods, and the excellent properties of the two are used to synergize the treatment of organic pollutants. This strategy of "concentrating" pollutants and then degrading them in a centralized manner plays an essential role in removing trace PFASs. Nevertheless, a review focusing on this kind of adsorption photocatalyst system is lacking. This review will fill this gap and provide a reference for developing a carbon-based composite photocatalyst. Firstly, different carbon-based composite photocatalysts are reviewed in detail, focusing on the differences in various composite materials' excellent adsorption and catalytic properties. Secondly, the factors influencing the removal effect of carbon-based composite photocatalysts are discussed. Thirdly, the removal mechanism of carbon-based composite photocatalysts is summarized in detail. The removal process involves two steps: adsorption and photodegradation. The adsorption process involves multiple cooperative adsorption mechanisms, and photocatalytic degradation includes oxidative and reductive degradation. Fourthly, the comparison of adsorption-photocatalysis with common treatment techniques (including removal rate, range of adaptation, cost, and the possibility of expanding application) is summarized. Finally, the prospects of carbon-based composite photocatalysts for repairing PFASs are given by evaluating the performance of different composites.

Approaches for Modifying Oxide-Semiconductor Materials to Increase the Efficiency of Photocatalytic Water Splitting

The constant increase in the amount of energy consumed and environmental problems associated with the use of fossil fuels determine the relevance of the search for alternative and renewable energy sources. One of these is hydrogen gas, which can be produced by sunlight-driven photocatalytic water splitting. The decisive role in the efficiency of the process is played by the properties of the photocatalyst. Oxide materials are widely used as photocatalysts due to their appropriate band structure, high-enough photochemical stability and corrosion resistance. However, the bandgap, crystallinity and the surface morphology of oxide materials are subject to improvement. Apart from the properties of the photocatalyst, the parameters of the process influence the hydrogen-production efficiency. This paper outlines the key ways to improve the characteristics of oxide-semiconductor photocatalysts with the optimum parameters of photocatalytic water splitting.

Smartphone Case-Based Gas Sensing Platform for On-site Acetone Tracking

Gas sensor-embedded smartphones would offer the opportunity of on-site tracking of gas molecules for various applications, for example, harmful air pollutant alarms or noninvasive assessment of health status. Nevertheless, high power consumption and difficulty in replacing malfunctioned sensors as well as limited space in the smartphone to host the sensor restrain the relevant advancements. In this article, we create a smartphone case-based sensing platform by integrating the functional units into a smartphone case, which performs a low detection limit of 117 ppb to acetone and high specificity. Particularly, dimming glass-regulated light fidelity (Li-Fi) communication is successfully developed, allowing the sensing platform to operate with relatively low power consumption (around 217 mW). Experimental proof on harmful gas sensing and potential clinic application is implemented with the sensing platform, demonstrating satisfactory sensing performance and acceptable health risk pre-warning accuracy (87%). Thus, the developed smartphone case-based sensing platform would be a good candidate for realizing harmful gas alarms and noninvasive assessment of health status.

Improvement of the Photocatalytic Activity of Au/TiO2 Nanocomposites by Prior Treatment of TiO2 with Microplasma in an NH3 and H2O2 Solution

Plasmonic photocatalytic nanocomposites of TiO2 and Au nanoparticles (NPs) have recently attracted the attention of researchers, who aim to improve the photocatalytic activity of potential TiO2 NPs. In this study, we report photocatalytic activity enhancement for a Au/TiO2 nanocomposite prepared by the plasma–liquid interaction method using an atmospheric microplasma apparatus. The enhanced photocatalytic activity of the prepared Au/TiO2 is demonstrated by the degradation of methylene blue (MB) in water under both ultraviolet (UV) and visible light irradiation. The prior treatment of TiO2 with microplasma in a NH3 and H2O2 solution is found to strongly improve the photocatalytic activity of both the treated TiO2 NPs, as well as the synthesized Au/TiO2 nanocomposite.

Non-Noble Plasmonic Metal-Based Photocatalysts

Solar-to-chemical energy conversion via heterogeneous photocatalysis is one of the sustainable approaches to tackle the growing environmental and energy challenges. Among various promising photocatalytic materials, plasmonic-driven photocatalysts feature prominent solar-driven surface plasmon resonance (SPR). Non-noble plasmonic metals (NNPMs)-based photocatalysts have been identified as a unique alternative to noble metal-based ones due to their advantages like earth-abundance, cost-effectiveness, and large-scale application capability. This review comprehensively summarizes the most recent advances in the synthesis, characterization, and properties of NNPMs-based photocatalysts. After introducing the fundamental principles of SPR, the attributes and functionalities of NNPMs in governing surface/interfacial photocatalytic processes are presented. Next, the utilization of NNPMs-based photocatalytic materials for the removal of pollutants, water splitting, CO₂ reduction, and organic transformations is discussed. The review concludes with current challenges and perspectives in advancing the NNPMs-based photocatalysts, which are timely and important to plasmon-based photocatalysis, a truly interdisciplinary field across materials science, chemistry, and physics.

Unique BiFeO3/g-C3N4 mushroom heterojunction with photocatalytic antibacterial and wound therapeutic activity

Bacterial infections have become a major problem threatening public health, and it is of great significance to treat wound infections in biological systems caused by bacteria. However, traditionally used bacteriostatic agents usually cause additional pollution. Herein a mushroom-shaped clean and Green BiFeO₃/g-C₃N₄ composite is employed for the first time for photocatalytic antibacterial activity and for the further promotion of wound healing. The ratio between BiFeO₃ and g-C₃N₄ was delicately regulated to control the generated amount of ˙OH and ˙O₂^- by catalyzing the decomposition of hydrogen peroxide (H₂O₂) under illumination. Results show that 10%BFO/CN demonstrates the best performance for ˙OH and ˙O₂^- production, resulting in the highest antibacterial ability against E. coli and S. aureus. In addition, the catalytic mechanism of BiFeO₃/g-C₃N₄ towards antibacterial activity is disclosed by a combination of ESR monitoring and analysis of the Mott-Schottky diagram. Furthermore, in vivo experiments prove that 10%BFO/CN can effectively promote anti-infection and wound healing in nude mice. This work sheds deep scientific insight on the synergistic effect of photocatalysis and photo-Fenton degradation as well as their application in antibacterial and wound therapeutic activity.

Insights into ZnO-based doped porous nanocrystal frameworks

Colloidal nanocrystals play a vital role in several applications. The doping of cations in the nanocrystal matrix enhances the optical, electrical, and magnetic properties. The number and well-defined distribution of the dopant are crucial to protect the nanocrystal from clustering. The XRD, XPS, and XAS instruments reveal the change in the lattice parameters, chemical states, and local coordination environment information. In addition of detecting the position and distribution of the dopant, the 4D-STEM detector mode gathers all types of real-space atomic-resolution images by collecting all diffraction datasets from each electron probe with high-speed and efficient detection. Dopant-host ligand type, reactions conditions, and reaction time optimization during synthesis are critical for the host and dopant reactivity balance. Pearson's hard/soft acids/bases theory would be a base for balancing the solubility of the dopant-host in the given solvents/surfactant. In addition, tuning the colloidal nanocrystals to secondary structures, which enhances the mass-/ions transport, can contribute a combination of properties that do not exist in the original constituents.

Exploring flowery MnO2/Ag nanocomposite as an efficient solar-light-driven photocatalyst

An efficient approach was developed to boost the solar light driven photocatalytic efficacy of pristine flowery MnO2 NCs through the immobilization of Ag NPs, which in turn produces MnO2/Ag NCs.

C. SS, Bajiri MA, Drmosh QAQ, Krishnappagowda LN, Ananda S. Rational design of 2D TiO2-MoO3 Step-scheme heterostructure for boosted photocatalytic overall water splitting

Designing of step-scheme (S-scheme) heterostructure photocatalyst is a promising strategy for the high utilization of photogenerated charge carriers. Herein, a novel S-scheme two-dimensional (2D) TiO2-MoO3 heterojunction photocatalyst is fabricated by...

Carbon nanotubes as electronic mediators combined with Bi2MoO6and g-C3N4to form Z-scheme heterojunctions to enhance visible light photocatalysis

In this paper, Z-scheme Bi₂MoO₆/CNTs/g-C₃N₄composite photocatalysts were prepared through a simple hydrothermal method. The analysis was performed by XRD, FT-IR, SEM, EDS, TEM, HRTEM, XPS, BET, UV-Vis diffuse reflectance and PL spectrums. Various analyses show that CNTs not only act as excellent charge transfer bridges, but also enable a formation of the Z-scheme of charge transfer mechanism between Bi₂MoO₆and g-C₃N₄. This process not only effectively isolates electrons and holes, but also prolongs electron-hole pair lifetimes, resulting in a substantial improvement in the photocatalytic performance of the composite photocatalyst. Best photocatalytic degradation performance was shown by Bi₂MoO₆/CNTs/g-C₃N₄composite photocatalyst under simulated sunlight, while the composite photocatalyst still maintained extremely high degradation performance in cycling tests.

Plasmon-Triggered Upconversion Emissions and Hot Carrier Injection for Combinatorial Photothermal and Photodynamic Cancer Therapy

Despite the unique ability of lanthanide-doped upconversion nanoparticles (UCNPs) to convert near-infrared (NIR) light to high-energy UV-vis radiation, low quantum efficiency has rendered their application unpractical in biomedical fields. Here, we report anatase titania-coated plasmonic gold nanorods decorated with UCNPs (Au NR@aTiO₂@UCNPs) for combinational photothermal and photodynamic therapy to treat cancer. Our novel architecture employs the incorporation of an anatase titanium dioxide (aTiO₂) photosensitizer as a spacer and exploits the localized surface plasmon resonance (LSPR) properties of the Au core. The LSPR-derived near-field enhancement induces a threefold boost of upconversion emissions, which are re-absorbed by neighboring aTiO₂ and Au nanocomponents. Photocatalytic experiments strongly infer that LSPR-induced hot electrons are injected into the conduction band of aTiO₂, generating reactive oxygen species. As phototherapeutic agents, our hybrid nanostructures show remarkable in vitro anticancer effect under NIR light [28.0% cancer cell viability against Au NR@aTiO₂ (77.3%) and UCNP@aTiO₂ (98.8%)] ascribed to the efficient radical formation and LSPR-induced heat generation, with cancer cell death primarily following an apoptotic pathway. In vivo animal studies further confirm the tumor suppression ability of Au NR@aTiO₂@UCNPs through combinatorial photothermal and photodynamic effect. Our hybrid nanomaterials emerge as excellent multifunctional phototherapy agents, providing a valuable addition to light-triggered cancer treatments in deep tissue.

Electron and Energy Transfer Mechanisms: The Double Nature of TiO2 Heterogeneous Photocatalysis

Photocatalytic chemical transformations in the presence of irradiated TiO₂ are generally considered in terms of interfacial electron transfer. However, more elusive energy-transfer-driven reactions have been also hypothesized to occur, mainly on the basis of the indirect evidence of detected reaction products whose existence could not be justified simply by electron transfer. Unlike in homogeneous and colloidal systems, where energy transfer mechanisms have been investigated deeply for several organic syntheses, understanding of similar processes in heterogeneous systems is at only a nascent level. However, this gap of knowledge can be filled by considering the important achievements of synthetic heterogeneous photocatalysis, which bring the field closer to industrial exploitation. The present manuscript summarizes the main findings of previous literature reports and, also on the basis of some novel experimental evidences, tentatively proposes that the energy transfer in TiO₂ photocatalysis could possess a Förster-like nature.

Carbon-Based Nanocomposite Smart Sensors for the Rapid Detection of Mycotoxins

Carbon-based nanomaterials have become the subject of intensive interest because their intriguing physical and chemical properties are different from those of their bulk counterparts, leading to novel applications in smart sensors. Mycotoxins are secondary metabolites with different structures and toxic effects produced by fungi. Mycotoxins have low molecular weights and highly diverse molecular structures, which can induce a spectrum of biological effects in humans and animals even at low concentrations. A tremendous amount of biosensor platforms based on various carbon nanocomposites have been developed for the determination of mycotoxins. Therefore, the contents of this review are based on a balanced combination of our own studies and selected research studies performed by academic groups worldwide. We first address the vital preparation methods of biorecognition unit (antibodies, aptamers, molecularly imprinted polymers)-functionalized carbon-based nanomaterials for sensing mycotoxins. Then, we summarize various types of smart sensors for the detection of mycotoxins. We expect future research on smart sensors to show a significant impact on the detection of mycotoxins in food products.

Au integrated 2D ZnO heterostructures as robust visible light photocatalysts

Integration of semiconducting nanostructures with noble metal nanoparticles are turning highly desirable for cost efficient energy and environmental related applications. From this viewpoint, we report on a facile aqueous synthesis of polymer capped gold (Au) nanoparticles on free standing 2D layered structures of zinc oxide (ZnO) to result with ZnO/Au nanocomposites. Concentration of Au nanoparticles were observed to promote the preferential growth of ZnO along the (002) wurtzite plane. The ZnO/Au structures and their morphological dissemination was noted to be of few. This flake like structure was also noted to be greatly influenced by the concentration of Au in the colloidal blend. Optical band edge transformations noted in the absorption spectra across the lower wavelength region and the shift in surface plasmon resonance (SPR) towards the red region of the visible spectrum signify the improved absorptivity of the heterostructures along the visible spectrum. These heterostructures exhibited remarkable visible light driven photocatalytic activity (99% efficiency) on par with pristine ZnO. The findings also attest this new class of composite structures to open up new openings in diversified solar energy conversion related functions.

ZnIn2 S4 -Based Photocatalysts for Energy and Environmental Applications

As a fascinating visible-light-responsive photocatalyst, zinc indium sulfide (ZnIn₂ S₄ ) has attracted extensive interdisciplinary interest and is expected to become a new research hotspot in the near future, due to its nontoxicity, suitable band gap, high physicochemical stability and durability, ease of synthesis, and appealing catalytic activity. This review provides an overview on the recent advances in ZnIn₂ S₄ -based photocatalysts. First, the crystal structures and band structures of ZnIn₂ S₄ are briefly introduced. Then, various modulation strategies of ZnIn₂ S₄ are outlined for better photocatalytic performance, which includes morphology and structure engineering, vacancy engineering, doping engineering, hydrogenation engineering, and the construction of ZnIn₂ S₄ -based composites. Thereafter, the potential applications in the energy and environmental area of ZnIn₂ S₄ -based photocatalysts are summarized. Finally, some personal perspectives about the promises and prospects of this emerging material are provided.

A Review on Metal Ions Modified TiO2 for Photocatalytic Degradation of Organic Pollutants

TiO2 is a semiconductor material with high chemical stability and low toxicity. It is widely used in the fields of catalysis, sensing, hydrogen production, optics and optoelectronics. However, TiO2 photocatalyst is sensitive to ultraviolet (UV) light; this is why its photocatalytic activity and quantum efficiency are reduced. To enhance the photocatalytic efficiency in the visible light range as well as to increase the number of the active sites on the crystal surface or inhibit the recombination rate of photogenerated electron–hole pairs electrons, various metal ions were used to modify TiO2. This review paper comprehensively summarizes the latest progress on the modification of TiO2 photocatalyst by a variety of metal ions. Lastly, the future prospects of the modification of TiO2 as a photocatalyst are proposed.

Electric Field Assisted Femtosecond Laser Preparation of Au@TiO2 Composites with Controlled Morphology and Crystallinity for Photocatalytic Degradation

TiO₂ is popular in photocatalytic degradation dye pollutants due to its abundance and its stability under photochemical conditions. Au loaded TiO₂ can achieve efficient absorption of visible light and deal with the problem of low conversion efficiency for solar energy of TiO₂. This work presents a new strategy to prepare Au nanoparticles-loaded TiO₂ composites through electric−field−assisted temporally−shaped femtosecond laser liquid-phase ablation of Au³⁺ and amorphous TiO₂. By adjusting the laser pulse delay and electric field parameters, gold nanoparticles with different structures can be obtained, such as nanospheres, nanoclusters, and nanostars (AuNSs). AuNSs can promote the local crystallization of amorphous TiO₂ in the preparation process and higher free electron density can also be excited to work together with the mixed crystalline phase, hindering the recombination between carriers and holes to achieve efficient photocatalytic degradation. The methylene blue can be effectively degraded by 86% within 30 min, and much higher than the 10% of Au nanoparticles loaded amorphous TiO₂. Moreover, the present study reveals the crystallization process and control methods for preparing nanoparticles by laser liquid ablation, providing a green and effective new method for the preparation of high-efficiency photocatalytic materials.

Threefold Collaborative Stabilization of Ag14 -Nanorods by Hydrophobic Ti16 -Oxo Clusters and Alkynes: Designable Assembly and Solid-State Optical-Limiting Application

Ag nanoclusters have received increasing attention due to their atomically precise and diverse structures and intriguing optical properties. Nevertheless, the inherent instability of Ag nanoclusters has seriously hindered their practical application. In this work, for the first time, Ag clusters are collaboratively protected by hydrophobic Ti-oxo clusters and alkyne ligands. Initially, a pyramidal Ag₅ cluster terminated with ^t BuC≡C^- and CH₃ CN was inserted into the cavity of a Ti₈ -oxo nanoring to form Ag₅ @Ti₈ . To overcome the instability of acetonitrile-terminated silver site, such two Ag₅ @Ti₈ clusters could sandwich an Ag₄ unit to form Ag₁₄ -nanorod@Ti₁₆ -oxo-nanoring (Ag₁₄ @Ti₁₆ ), which is peripherally protected by fluorophenyl groups and alkyne caps. This threefold protected (hydrophobic fluorinated organic layer, Ti-O shell, and terminal alkyne ligands) Ag₁₄ @Ti₁₆ exhibits superhydrophobicity and excellent ambient stability, endowing it with solid-state optical limiting characteristics.