Mixed Systems of Quaternary Ammonium Foam Drainage Agent with Carbon Quantum Dots and Silica Nanoparticles for Improved Gas Field Performance

Foam drainage agents enhance gas production by removing wellbore liquids. However, due to the ultra-high salinity environments of the Hechuan gas field (salinity up to 32.5 × 104 mg/L), no foam drainage agent is suitable for this gas field. To address this challenge, we developed a novel nanocomposite foam drainage system composed of quaternary ammonium and two types of nanoparticles. This work describes the design and synthesis of a quaternary ammonium foam drainage agent and nano-engineered stabilizers. Nonylphenol polyoxyethylene ether sulfosuccinate quaternary ammonium foam drainage agent was synthesized using maleic anhydride, sodium chloroacetate, N,N-dimethylpropylenediamine, etc., as precursors. We employed the Stöber method to create hydrophobic silica nanoparticles. Carbon quantum dots were then prepared and functionalized with dodecylamine. Finally, carbon quantum dots were incorporated into the mesopores of silica nanoparticles to enhance stability. Through optimization, the best performance was achieved with a (quaternary ammonium foam drainage agents)-(carbon quantum dots/silica nanoparticles) ratio of 5:1 and a total dosage of 1.1%. Under harsh conditions (salinity 35 × 104 mg/L, condensate oil 250 cm3/m3, temperature 80 °C), the system exhibited excellent stability with an initial foam height of 160 mm, remaining at 110 mm after 5 min. Additionally, it displayed good liquid-carrying capacity (160 mL), low surface tension (27.91 mN/m), and a long half-life (659 s). These results suggest the effectiveness of nanoparticle-enhanced foam drainage systems in overcoming high-salinity challenges. Previous foam drainage agents typically exhibited a salinity resistance of no more than 25 × 104 mg/L. In contrast, this innovative system demonstrates a superior salinity tolerance of up to 35 × 104 mg/L, addressing a significant gap in available agents for high-salinity gas fields. This paves the way for future development of advanced foam systems for gas well applications with high salinity.

State-of-the-art developments in carbon quantum dots (CQDs): Photo-catalysis, bio-imaging, and bio-sensing applications

Carbon quantum dots (CQDs), the intensifying nanostructured form of carbon material, have exhibited incredible impetus in several research fields such as bio-imaging, bio-sensing, drug delivery systems, optoelectronics, photovoltaics, and photocatalysis, thanks to their exceptional properties. The CQDs show extensive photonic and electronic properties, as well as their light-collecting, tunable photoluminescence, remarkable up-converted photoluminescence, and photo-induced transfer of electrons were widely studied. These properties have great advantages in a variety of visible-light-induced catalytic applications for the purpose of fully utilizing the energy from the solar spectrum. The major purpose of this review is to validate current improvements in the fabrication of CQDs, characteristics, and visible-light-induced catalytic applications, with a focus on CQDs multiple functions in photo-redox processes. We also examine the problems and future directions of CQD-based nanostructured materials in this growing research field, with an eye toward establishing a decisive role for CQDs in photocatalysis, bio-imaging, and bio-sensing applications that are enormously effective and stable over time. In the end, a look forward to future developments is presented, with a view to overcoming challenges and encouraging further research into this promising field.

A Brief Review of Carbon Dots-Silica Nanoparticles Synthesis and their Potential Use as Biosensing and Theragnostic Applications

Carbon dots (CDs) are carbon nanoparticles with sizes below 10 nm and have attracted attention due to their relatively low toxicity, great biocompatibility, water solubility, facile synthesis, and exceptional photoluminescence properties. Accordingly, CDs have been widely exploited in different sensing and biomedical applications, for example, metal sensing, catalysis, biosensing, bioimaging, drug and gene delivery, and theragnostic applications. Similarly, the well-known properties of silica, such as facile surface functionalization, good biocompatibility, high surface area, and tunable pore volume, have allowed the loading of diverse inorganic and organic moieties and nanoparticles, creating complex hybrid nanostructures that exploit distinct properties (optical, magnetic, metallic, mesoporous, etc.) for sensing, biosensing, bioimaging, diagnosis, and gene and drug delivery. In this context, CDs have been successfully grafted into diverse silica nanostructures through various synthesis methods (e.g., solgel chemistry, inverse microemulsion, surfactant templating, and molecular imprinting technology (MIT)), imparting hybrid nanostructures with multimodal properties for distinct objectives. This review discusses the recently employed synthesis methods for CDs and silica nanoparticles and their typical applications. Then, we focus on combined synthesis techniques of CD-silica nanostructures and their promising biosensing operations. Finally, we overview the most recent potential applications of these materials as innovative smart hybrid nanocarriers and theragnostic agents for the nanomedical field.

Recent Progress on Carbon Quantum Dots Based Photocatalysis

As a novel carbon allotrope, carbon quantum dots (CQDs) have been investigated in various fields, including photocatalysis, bioimaging, optoelectronics, energy and photovoltaic devices, biosensing, and drug delivery owing to their unique optical and electronic properties. In particular, CQDs' excellent sunlight harvesting ability, tunable photoluminescence (PL), up-conversion photoluminescence (UCPL), and efficient photo-excited electron transfer have enabled their applications in photocatalysis. This work focuses on the recent progress on CQDs-related materials' synthesis, properties, and applications in photocatalysis.

A novel rapid synthesis of highly stable silver nanoparticle/carbon quantum dot nanocomposites derived from low-grade coal feedstock

Coal-based highly stable carbon quantum dot/silver nanocomposites.

Fenton-like removal of tetracycline from aqueous solution using iron-containing carbon dot nanocatalysts

Iron-containing carbon dot nano-catalysts were synthesized hydrothermally and the Fenton-like reaction catalysed by Fe/CD was able to efficiently remove tetracycline.

Band gap tuning and surface modification of carbon dots for sustainable environmental remediation and photocatalytic hydrogen production - A review

Energy and water are the two major issues facing the modern mankind. Providing freshwater requires energy and producing energy uses water. In the present-day scenario, both these routes face growing problems and limitations. Energy crisis has risen due to the depletion of fossil fuels that cause pollution to water bodies making the water unusable for human consumption. In this regard, semiconductor nanocrystals with luminescent properties or carbon quantum dots (CQDs) are the newly developed nanomaterials whose distinctive photo-physical characteristics are focusing to a new generation of robust materials and sensors for sustainable development. In this review, advances in surface and band gap modification of CQDs to improve the activity of nanomaterials will be discussed with special reference to some specific CQDs exhibiting special optical properties for water treatment/splitting applications. Recent advances on CQDs nanocomposites including their applications in photodegradation of organic pollutants, sensing of heavy metal ions in water and water splitting are discussed critically to narrate the future prospects in this field. Challenges and limitations for further improvement are covered to provide smart choices for creating sustainability of benign environment and economic benefits.

Challenges and implication of full solar spectrum-driven photocatalyst

Conventional metal oxide and its composites embrace the long-standing problem of using the combined visible and near-infrared (NIR) light. Doping with suitable impurities of metal, nonmetal, or its combinations for visible light enhancement is very well studied. However, the quantum efficiency of these photocatalysts does not produce an exciting appearance toward visible and NIR light when irradiated through either artificial or natural light. Furthermore, owing to the limited availability of solar light, challenges arise from the implication of these developed nano-photocatalysts. Therefore, the hybridized concept was developed for the effective use of either full or partial solar spectrum, even functioning in dark conditions. The present review focuses on the challenges of hybridized photocatalysts in storing and discharging the harvested photons obtained from the solar spectrum. The review vividly emphasizes the evolution of light-driven nanomaterials since its innovation and significant breakthroughs in brief, while a detailed presentation of the implications of hybrid photocatalysts for full solar applications, including the mechanistic features, charging-discharging characteristics, work function, charge carrier mobility, and interactions, follows. The article also delivers the substantial contribution of these materials in regard to energy and environmental application.

Biocompatible FeOOH-Carbon quantum dots nanocomposites for gaseous NOx removal under visible light: Improved charge separation and High selectivity

Development of biocompatible photocatalysts with improved charge separation and high selectivity is essential for effective removal of air pollutants. Iron-containing catalysts have attracted extensive attention due to their low-toxicity and high natural abundance. Here, carbon quantum dots (CQDs) modified FeOOH nanocomposites fabricated using a facile hydrothermal route showed enhanced NO removal efficiency (22%) compared to pure FeOOH. Moreover, generation of toxic NO₂ intermediates was significantly inhibited using the nanocomposites, demonstrating high selectivity for final nitrate formation. Photo-electrochemical results showed that both charge separation and transfer efficiency were significantly improved by CQDs addition, and the lifetime of photo-generated carriers was increased eventually. Density functional theory calculations further elucidated that the suppressed recombination of photo-induced electron-hole pairs was due to enhanced electron migration from the FeOOH to CQDs. A NO degradation mechanism was proposed based on detection of the reactive oxygen species using electron paramagnetic spectroscopy. In addition, the nanocomposite showed good biocompatibility and low cytotoxity, ensuring minimal environmental impact for potential application in large-scale.

Application of carbon dots as efficient catalyst for the green oxidation of phenol: Kinetic study of the degradation and optimization using response surface methodology

The reactivity of bio-polymer based nano carbon dots (NCDs) was studied for catalyzing the decomposition of H₂O₂ to generate free hydroxyl radicals and consequently its applicability in the removal of phenol. To the best of our knowledge, for the first time, this work reports that bio-polymer based NCDs could activate H₂O₂ and yielding more than 99% phenol degradation within 20 min in the presence of 12 mmol H₂O₂. Herein, a simple hydrothermal carbonization route was employed for the synthesis of NCDs. The surface morphology, functional groups and crystallinity of the NCDs are studied. SEM images show the NCDs with spherical shape. The graphitic nature of the NCDs was evident from the XRD pattern. The presence of many surface functional groups is confirmed by FT-IR spectra. The influences of three independent operating parameters involving hydrogen peroxide concentration (4-12 mmol), reaction time (10-20 min) and catalyst amount (50-1000 ppm) on the phenol oxidation rate by two NCDs were examined using response surface methodology (RSM). Terephthalic acid (TA) dosimetry demonstrates that the as-prepared NCDs can produce hydroxyl radicals from H₂O₂, and hence catalyze the oxidation of phenol. Finally, the reusability of the NCDs catalysts was examined and the produced catalysts exhibit good recyclability.

Natural-Product-Derived Carbon Dots: From Natural Products to Functional Materials

Nature provides an almost limitless supply of sources that inspire scientists to develop new materials with novel applications and less of an environmental impact. Recently, much attention has been focused on preparing natural-product-derived carbon dots (NCDs), because natural products have several advantages. First, natural products are renewable and have good biocompatibility. Second, natural products contain heteroatoms, which facilitate the fabrication of heteroatom-doped NCDs without the addition of an external heteroatom source. Finally, some natural products can be used to prepare NCDs in ways that are very green and simple relative to traditional methods for the preparation of carbon dots from man-made carbon sources. NCDs have shown tremendous potential in many fields, including biosensing, bioimaging, optoelectronics, and photocatalysis. This Review addresses recent progress in the synthesis, properties, and applications of NCDs. The challenges and future direction of research on NCD-based materials in this booming field are also discussed.

An evaporation induced self-assembly approach to prepare polymorphic carbon dot fluorescent nanoprobes for protein labelling

Herein, we report a novel route to prepare polymorphic carbon dot fluorescent probes via the evaporation-induced self-assembly of glutaraldehyde and carbon dots, which first usually form carbon nanoclusters which then could self-assemble to form carbon nanocrystals, nanospheres or nanofibers in different ionic strength solutions at room temperature.

Carbon dot-silica composite nanoparticle: an excitation-independent fluorescence material with tunable fluorescence

A novel composite nanoparticle of silica/carbon dots showing tunable fluorescence from green to yellow without excitation wavelength dependence is fabricated.

Advances, challenges and promises of carbon dots

Carbon-dots with unique physical and chemical properties have versatile applications in environmental and energy fields.

Carbon quantum dots and their applications

This review covers the progress in the research and development of carbon quantum dots and their applications in chemical sensing, biosensing, bioimaging, nanomedicine, photocatalysis and electrocatalysis.

Laser-assisted synthesis of multi-colored protein dots and their biological distribution in experimental mice using a dye tracking method

We report a novel method for the synthesis of ultra-bright green and red colored protein dots (Pr-dots) using continuous and pulse lasers (λ = 534 and 1064 nm) with lysozyme as a precursor in ethanol.