Improvement in Radiative Efficiency Via Intramolecular Charge Transfer in ortho-Carboranyl Luminophores Modified with Functionalized Biphenyls

In this study, we found that the electronic effects of the functional groups on aromatic units attached to o-carboranyl species can enhance the efficiency of intramolecular charge transfer (ICT)-based radiative decay processes. Six o-carboranyl-based luminophores having attached functionalized biphenyl groups with CF₃, F, H, CH₃, C(CH₃)₃, and OCH₃ substituents were prepared and fully characterized by multinuclear magnetic resonance spectroscopy. In addition, their molecular structures were determined by single-crystal X-ray diffractometry, which revealed that the distortion of the biphenyl rings and the geometries around the o-carborane cages were similar. All compounds exhibited ICT-based emissions in the rigid state (solution at 77 K and film). Intriguingly, the quantum efficiencies (Φ_em) of five compounds (that of the group with CF₃ could not be measured because of its extremely weak emissions) in the film state increased gradually as the electron-donating power of the terminal functional group modifying the biphenyl moiety increased. Furthermore, the nonradiative decay constants (k_nr) for the group with OCH₃ were estimated to be one-tenth of those for the group with F, whereas the radiative decay constants (k_r) for the five compounds were similar. The dipole moments (μ) calculated for the optimized first excited state (S₁) structures gradually increased, from that of the group with CF₃ to that of the group with OCH₃, implying that the inhomogeneity of the molecular charge distribution was enhanced by electron donation. The electron-rich environment formed as a result of electron donation led to efficient charge transfer to the excited state. Both experimental and theoretical findings revealed that the electronic environment of the aromatic moiety in o-carboranyl luminophores can be controlled to accelerate or interrupt the ICT process in the radiative decay of excited states.

Relationship between the Molecular Geometry and the Radiative Efficiency in Naphthyl-Based Bis-Ortho-Carboranyl Luminophores

The efficiency of intramolecular charge transfer (ICT)-based emission on π-aromatic-group-appended closo-ortho-carboranyl luminophores is known to be affected by structural fluctuations and molecular geometry, but investigation of this relationship has been in progress to date. In this study, four naphthyl-based bis-o-carboranyl compounds, in which hydrogen (15CH and 26CH) or trimethysilyl groups (15CS and 26CS) were appended at the o-carborane cage, were synthesized and fully characterized. All the compounds barely displayed an emissive trace in solution at 298 K; however, 15CH and 26CH distinctly exhibited a dual emissive pattern in rigid states (in solution at 77 K and in films), attributed to locally excited (LE) and ICT-based emission, while 15CS and 26CS showed strong ICT-based greenish emission. Intriguingly, the molecular structures of the four compounds, analyzed by single X-ray crystallography, showed that the C-C bond axis of the o-carborane cage in the trimethysilyl group-appended compounds 15CS and 26CS were more orthogonal to the plane of the appended naphthyl group than those in 15CH and 26CH. These features indicate that 15CS and 26CS present an efficient ICT transition based on strong exo-π-interaction, resulting in a higher quantum efficiency (Φ_em) for ICT-based radiative decay than those of 15CH and 26CH. Moreover, the 26CS structure revealed most orthogonal geometry, resulting in the highest Φ_em and lowest k_nr values for the ICT-based emission. Consequently, all the findings verified that efficient ICT-based radiative decay of aromatic group-appended o-carboranyl luminophores could be achieved by the formation of a specific geometry between the o-carborane cage and the aromatic plane.

Research Progress of Intramolecular π-Stacked Small Molecules for Device Applications

Organic semiconductors can be designed and constructed in π-stacked structures instead of the conventional π-conjugated structures. Through-space interaction (TSI) occurs in π-stacked optoelectronic materials. Thus, unlike electronic coupling along the conjugated chain, the functional groups can stack closely to facilitate spatial electron communication. Using π-stacked motifs, chemists and materials scientists can find new ways for constructing materials with aggregation-induced emission (AIE), thermally activated delayed fluorescence (TADF), circularly polarized luminescence (CPL), and room-temperature phosphorescence (RTP), as well as enhanced molecular conductance. Organic optoelectronic devices based on π-stacked molecules have exhibited very promising performance, with some of them exceeding π-conjugated analogues. Recently, reports on various organic π-stacked structures have grown rapidly, prompting this review. Representative molecular scaffolds and newly developed π-stacked systems could stimulate more attention on through-space charge transfer the well-known through-bond charge transfer. Finally, the opportunities and challenges for utilizing and improving particular materials are discussed. The previous achievements and upcoming prospects may provide new insights into the theory, materials, and devices in the field of organic semiconductors.

Effects of molecular geometry on the efficiency of intramolecular charge transfer-based luminescence in o-carboranyl-substituted 1H-phenanthro[9,10-d]imidazoles

The distinct difference in solid-state emission efficiency between 1H-phenanthro[9,10-d]imidazole–o-carboranyl luminophores showed that the geometric orientation is a key factor for controlling intramolecular charge transfer-based radiative decay.

Structure-controllable growth of nitrogenated graphene quantum dots via solvent catalysis for selective C-N bond activation

Photophysical and photochemical properties of graphene quantum dots (GQDs) strongly depend on their morphological and chemical features. However, systematic and uniform manipulation of the chemical structures of GQDs remains challenging due to the difficulty in simultaneous control of competitive reactions, i.e., growth and doping, and the complicated post-purification processes. Here, we report an efficient and scalable production of chemically tailored N-doped GQDs (NGs) with high uniformity and crystallinity via a simple one-step solvent catalytic reaction for the thermolytic self-assembly of molecular precursors. We find that the graphitization of N-containing precursors during the formation of NGs can be modulated by intermolecular interaction with solvent molecules, the mechanism of wh ich is evidenced by theoretical calculations and various spectroscopic analyses. Given with the excellent visible-light photoresponse and photocatalytic activity of NGs, it is expected that the proposed approach will promote the practical utilization of GQDs for various applications in the near future.

Photophysical and photochemical features of graphene quantum dots (GQDs) strongly depend on their chemical nature that remains challenging to be controlled in a systematic and uniform manner. Here the authors report an efficient solvent-catalyst-aided growth of chemically tailored N-doped GQDs.

Alteration of intramolecular electronic transition via deboronation of carbazole-based o-carboranyl compound and intriguing 'turn-on' emissive variation

The conversion of closo-o-carborane-containing compounds to the nido-o-species via deboronation causes photophysical changes that could be used for sensing applications. 9-Methyl-9H-carbazole-based closo- (closo-Cz) and nido-o-carboranyl (nido-Cz) compounds were prepared and fully characterised by multinuclear NMR spectroscopy and elemental analysis, and the solid-state molecular structure of closo-Cz was analysed by X-ray crystallography. Although the closo-compound exhibited an emissive pattern centred at λ em = ca. 530 nm in the rigid state only (in THF at 77 K and as a film), nido-Cz demonstrated intense emission in the near-UV region (λ em = ca. 380 nm) in both solution and film states at 298 K. The positive solvatochromic effect of nido-Cz and the results of theoretical calculations for both the o-carboranyl compounds supported that these emissive features originate from intramolecular charge transfer (ICT) corresponding to the o-carborane. Furthermore, the calculations verified that the electronic role of the o-carboranyl unit changed from acceptor to donor upon deboronation from closo-Cz to nido-Cz. Investigations of the radiative decay mechanisms of closo-Cz and nido-Cz according to their quantum efficiencies (Φ em) and decay lifetimes (τ obs) suggested that the ICT-based radiative decays of closo-Cz and nido-Cz readily occur in the film (solid) and solution state, respectively. These observations implied that the emission of closo-Cz in the solution state could be drastically enhanced by deboronation to nido-Cz upon exposure to an increasing concentration of fluoride anions. Indeed, turn-on emissive features in an aqueous solution were observed upon deboronation, strongly suggesting the potential of closo-Cz as a turn-on and visually detectable chemodosimeter for fluoride ion sensing.

Theoretical Simulations of Thermochromic and Aggregation-Induced Emission Behaviors of a Series of Red-Light Anthracene-o-carborane Derivatives

Quantum mechanical and molecular dynamics simulations have been carried out on a series of anthracene-o-carborane derivatives (ANT-H, ANT-Ph, ANT-Me and ANT-TMS) with rare red-light emission in the solid state. The simulation of the heating process of the crystals and further comparison of the molecular structures and excited-state properties before and after heating help us to disclose the thermochromic behavior, that is, the red-shift emission is caused by elongation of the C1-C2 bond in the carborane moiety after heating. Thus, we believe that the molecular structure in the crystal is severely affected by heating. Transformation of the molecular conformation appears in the ANT-H crystal with increasing temperature. More specifically, the anthracene moiety moves from nearly parallel to the C1-C2 bond to nearly perpendicular, causing the short-wavelength emission to disappear after heating. As for the aggregation-induced emission phenomenon, the structures and photophysical properties were investigated comparatively in both the isolated and crystal states; the results suggested that the energy dissipation in crystal surroundings was greatly reduced through hindering structure relaxation from the excited to the ground state. We expect that discussion of the thermochromic behavior will provide a new analysis perspective for the molecular design of o-carborane derivatives.

Strategic molecular design of closo-ortho-carboranyl luminophores to manifest thermally activated delayed fluorescence

In this paper, we propose a strategic molecular design of closo-o-carborane-based donor-acceptor dyad system that exhibits thermally activated delayed fluorescence (TADF) in the solution state at ambient temperature. Planar 9,9-dimethyl-9H-fluorene-based compounds with closo- and nido-o-carborane cages appended at the C2-, C3-, and C4-positions of each fluorene moiety (closo-type: 2FC, 3FC, 4FC, and 4FCH, and nido-type: nido-4FC = [nido-form of 4FC]·[NBu4]) were prepared and characterized. The solid-state molecular structure of 4FC exhibited a significantly distorted fluorene plane, which suggests the existence of severe intramolecular steric hindrance. In photoluminescence measurements, 4FC exhibits a noticeable intramolecular charge transition (ICT)-based emission in all states (solution at 298 K and 77 K, and solid states); however, emissions by other closo-compounds were observed in only the rigid state (solution at 77 K and film). Furthermore, nido-4FC did not exhibit emissive traces in any state. These observations verify that all radiative decay processes correspond to ICT transitions triggered by closo-o-carborane, which acts as an electron acceptor. Relative energy barriers calculated by TD-DFT as dihedral angles around o-carborane cages change in closo-compounds, which indicates that the structural formation of 4FC is nearly fixed around its S0-optimized structure. This differs from that for other closo-compounds, wherein the free rotation of their o-carborane cages occurs easily at ambient temperature. Such rigidity in the structural geometry of 4FC results in ICT-based emission in solution at 298 K and enhancement of quantum efficiency and radiative decay constants compared to those for other closo-compounds. Furthermore, 4FC displays short-lived (∼0.5 ns) and long-lived (∼30 ns) PL decay components in solution at 298 K and in the film state, respectively, which can be attributed to prompt fluorescence and TADF, respectively. The calculated energy difference (ΔE ST) between the first excited singlet and triplet states of the closo-compounds demonstrate that the TADF characteristic of 4FC originates from a significantly small ΔE ST maintained by the rigid structural fixation around its S0-optimized structure. Furthermore, the strategic molecular design of the o-carborane-appended π-conjugated (D-A) system, which forms a rigid geometry due to severe intramolecular steric hindrance, can enhance the radiative efficiency for ICT-based emission and trigger the TADF nature.

Impact of deboronation on the electronic characteristics of closo-o-carborane: intriguing photophysical changes in triazole-appended carboranyl luminophores

5-Phenyl-1,2,4-triazole-appended closo- (CB1 and CB2) and nido-o-carboranyl (nido-CB1 and nido-CB2) compounds were prepared and fully characterized using multinuclear NMR spectroscopy and elemental analysis. The solid-state molecular structures of both closo-compounds were analyzed by X-ray crystallography. Although the closo-compounds exhibited dual emissive patterns in the rigid state (in THF at 77 K), which were assignable to a π-π* local excitation (LE)-based emission (λ_em = ca. 380 nm) on the triazole moieties and to an intramolecular charge transfer (ICT)-based emission (ca. 460 nm) in which the o-carborane units acted as the acceptor (A), at 298 K in THF, the LE-based emission dominated. In contrast, the nido-compounds exhibited an intensive emission originating from ICT transitions in which the o-carborane units reversibly acted as the donor (D). In particular, the positive solvatochromic effects of both nido-compounds and the results of theoretical calculations for the o-carboranyl compounds supported the electronic role of the o-carboranyl unit in each compound. Investigation of the radiative decay mechanism of the closo- and nido-compounds using their quantum efficiency (Φ_em) and decay lifetime (τ_obs) suggested that the ICT-based radiative decay of nido-compounds occurred more efficiently than the LE-based decay of closo-compounds. These results implied that emission from the closo-compounds was drastically enhanced by the deboronation reaction upon exposure to an increasing concentration of fluoride anions, and finally became similar to the emission color (sky-blue) of the nido-compounds.

A "flexible" carborane-cored luminogen: variable emission behaviours in aggregates

The performance of tunable emissions in aggregates is highly desirable but challenging owing to the restricted molecular conformations of luminogens. Herein, we designed and synthesized a new "flexible" luminogen, a carborane-cored compound NAPH, which exhibits variable photophysical behaviours in aggregates, such as aggregation-induced emission, crystallization-induced emission, polymorph-dependent emission, and mechanochromic luminescence. Moreover, the two polymorphs with different emission colors show opposite mechano-responsive luminescence, which is rarely observed for single-component luminescent materials. Both theoretical calculations and photophysical experiments reveal that the carborane-cored luminogen could afford variable conformations. This endows the whole molecule with multiple conformations in aggregates, thus leading to variable emission behaviours. Therefore, the present work provides new access to the construction of multifunctional single-component solid-state luminescent materials.

Deboronation-Induced Ratiometric Emission Variations of Terphenyl-Based Closo-o-Carboranyl Compounds: Applications to Fluoride-Sensing

Closo-o-carboranyl compounds bearing the ortho-type perfectly distorted or planar terphenyl rings (closo-DT and closo-PT, respectively) and their nido-derivatives (nido-DT and nido-PT, respectively) were synthesized and fully characterized using multinuclear NMR spectroscopy and elemental analysis. Although the emission spectra of both closo-compounds exhibited intriguing emission patterns in solution at 298 and 77 K, in the film state, closo-DT mainly exhibited a π-π* local excitation (LE)-based emission in the high-energy region, whereas closo-PT produced an intense emission in the low-energy region corresponding to an intramolecular charge transfer (ICT) transition. In particular, the positive solvatochromic effect of closo-PT and theoretical calculation results at the first excited (S₁) optimized structure of both closo-compounds strongly suggest that these dual-emissive bands at the high- and low-energy can be assigned to each π-π* LE and ICT transition. Interestingly, both the nido-compounds, nido-DT and nido-PT, exhibited the only LE-based emission in solution at 298 K due to the anionic character of the nido-o-carborane cages, which cannot cause the ICT transitions. The specific emissive features of nido-compounds indicate that the emissive color of closo-PT in solution at 298 K is completely different from that of nido-PT. As a result, the deboronation of closo-PT upon exposure to increasing concentrations of fluoride anion exhibits a dramatic ratiometric color change from orange to deep blue via turn-off of the ICT-based emission. Consequently, the color change response of the luminescence by the alternation of the intrinsic electronic transitions via deboronation as well as the structural feature of terphenyl rings indicates the potential of the developed closo-o-carboranyl compounds that exhibit the intense ICT-based emission, as naked-eye-detectable chemodosimeters for fluoride ion sensing.

Recent Progress in the Development of Solid-State Luminescent o-Carboranes with Stimuli Responsivity

o-Carborane, a cluster compound containing boron and adjacent carbon atoms, displays intriguing luminescent properties. Recently, compounds containing o-carborane units were found to show suppressed aggregation-induced quenching and intense solid-state emission; they also show potential for the development of stimuli-responsive luminochromic materials. In this Minireview, we introduce three kinds of fundamental photochemical properties: aggregation-induced emission, twisted intramolecular charge transfer in crystals, and environment-sensitive excimer formation in solids. Based on these properties, several types of luminochromism, such as thermos-, vapo-, and mechanochromism, have been discovered. Based mainly on results from recent studies, we illustrate these mechanisms as well as unique luminescent behaviors of o-carborane derivatives.

Planarity of N-aryl in appended 1,2,4-triazole-based o-carboranyl luminophores: a key factor to control intramolecular charge transfer

The distinct difference in the photophysical characteristics between two triazole-based o-carboranes revealed that the planarity of aryl groups strongly influences intramolecular-charge-transfer-based emission.

Enhancing the thermally activated delayed fluorescence of nido-carborane-appended triarylboranes by steric modification of the phenylene linker

The introduction of a methyl group into the 4-position of the phenylene linker of nido-carborane–triarylborane D–A dyads, i.e., at the ortho position to the nido-carborane cage, largely enhances their thermally activated delayed fluorescence.

Photophysical Properties of Spirobifluorene-Based o-Carboranyl Compounds Altered by Structurally Rotating the Carborane Cages

9,9′-Spirobifluorene-based o-carboranyl compounds C1 and C2 were prepared and fully characterized by multinuclear nuclear magnetic resonance (NMR) spectroscopy and elemental analysis. The solid-state structure of C1 was also determined by single-crystal X-ray diffractometry. The two carboranyl compounds display major absorption bands that are assigned to π−π* transitions involving their spirobifluorene groups, as well as weak intramolecular charge-transfer (ICT) transitions between the o-carboranes and their spirobifluorene groups. While C1 only exhibited high-energy emissions (λ_em = ca. 350 nm) in THF at 298 K due to locally excited (LE) states assignable to π−π* transitions involving the spirobifluorene group alone, a remarkable emission in the low-energy region was observed in the rigid state, such as in THF at 77 K or the film state. Furthermore, C2 displays intense dual emissive patterns in both high- and low-energy regions in all states. Electronic transitions that were calculated by time-dependent-DFT (TD-DFT) for each compound based on ground (S₀) and first-excited (S₁) state optimized structures clearly verify that the low-energy emissions are due to ICT-based radiative decays. Calculated energy barriers that are based on the relative energies associated with changes in the dihedral angle around the o-carborane cages in C1 and C2 clearly reveal that the o-carborane cage in C1 rotates more freely than that in C2. All of the molecular features indicate that ICT-based radiative decay is only available to the rigid state in the absence of structural fluctuations, in particular the free-rotation of the o-carborane cage.

Syntheses and quadratic nonlinear optical properties of 2,7-fluorenylene- and 1,4-phenylene-functionalized o-carboranes

o-Carboranes C-functionalized by (4-substituted-phen-1-yl)ethynyl-1,4-phenyl groups or (2-substituted-fluoren-7-yl)ethynyl-2,7-fluorenyl groups, in which the pendant functionalization is electron-withdrawing nitro or electron-donating diphenylamino groups, have been synthesized and in many cases structurally characterized. Diphenylamino-containing examples coupled via the two π-delocalizable bridges to the electron-accepting o-carborane unit exhibit the greater quadratic optical nonlinearities at 1064 nm (hyper-Rayleigh scattering, ns pulses), the nonlinearities also increasing on proceeding from 1,4-phenylene- to 2,7-fluorenylene-containing bridge. The most NLO-efficient example 2-(n-butyl)-1-(2-((9,9-di(n-butyl)-2-(N,N-diphenylamino)-9H-fluoren-7-yl)ethynyl)-9,9-di(n-butyl)-9H-fluoren-7-yl)-1,2-ortho-carborane, consisting of diphenylamino donor, fluorenyl-containing bridge, o-carborane acceptor, and solubilizing n-butyl units, exhibits large 〈β〉_HRS (230 × 10^-30 esu) and frequency-independent (two-level model) 〈β₀〉 (96 × 10^-30 esu) values. Coupling two (2-((9,9-di(n-butyl)-2-(N,N-diphenylamino)-9H-fluoren-7-yl)ethynyl)-9,9-di(n-butyl)-9H-fluoren-7-yl) units to the 1,2-ortho-carborane core affords a di-C-functionalized compound with enhanced nonlinearities (309 × 10^-30 esu and 129 × 10^-30 esu, respectively).

Pyrazinoindole-Based Lewis-Acid/Base Assembly: Intriguing Intramolecular Charge-Transfer Switching through the Dual-Sensing of Fluoride and Acid

Pyrazinoindole-based Lewis-acid/base assemblies are prepared through the use of regioselective formal [3 + 3] cycloaddition reactions, and their intriguing photophysical properties are described. The assemblies exhibit strong emissions in THF solution, which are attributed to through-space intramolecular charge-transfer (ICT) transitions between the branched Lewis-acid/base moieties. Furthermore, these show ratiometric color-change responses in PL titration experiments, which give rise to new colors through turn-on emissions ascribable to ICT transitions that alternate between the pyrazinoindole units and each triarylboryl or amino moiety, a consequence of the binding of the fluoride or acid. Pieces of filter paper covered by these assemblies exhibited blue-shifted color changes when immersed in aqueous acidic solutions, suggesting that these are promising candidate indicators that detect acid through emissive color. Computational data for these assemblies and their corresponding adducts verify the existence of ICT transitions that alternate through fluoride or acid binding.

Improved synthesis of icosahedral carboranes containing exopolyhedral B-C and C-C bonds

Carboranes are boron-rich molecular clusters possessing electronic characteristics that allow for orthogonal approaches to vertex-selective modifications. We report improved functionalization methods utilizing orthogonal chemistry to achieve efficient substitution at electron-rich B-vertices and electron-poor C-vertices of carborane. Functionalization of B-vertices with alkyl and (hetero)aryl groups using the corresponding Grignard reagents has been improved through the use of a Pd-based precatalyst featuring an electron-rich biaryl phosphine ligand, resulting in reduced reaction times. Importantly, this method is tolerant towards alkyl-based Grignard reagents containing β-hydrogens. Furthermore, a transition metal-free approach to the substitution of carborane C-vertices with (hetero)aryl substrates has been developed under nucleophilic aromatic substitution (SNAr) conditions. The selective substitution of carboranes afforded by these methods holds potential for the rational synthesis of heterofunctionalized boron clusters with substituents on both boron and carbon-based vertices.

Effect of Planarity of Aromatic Rings Appended to o-Carborane on Photophysical Properties: A Series of o-Carboranyl Compounds Based on 2-Phenylpyridine- and 2-(Benzo[b]thiophen-2-yl)pyridine

Herein, we investigated the effect of ring planarity by fully characterizing four pyridine-based o-carboranyl compounds. o-Carborane was introduced to the C4 position of the pyridine rings of 2-phenylpyridine and 2-(benzo[b]thiophen-2-yl)pyridine (CB1 and CB2, respectively), and the compounds were subsequently borylated to obtain the corresponding C^∧N-chelated compounds CB1B and CB2B. Single-crystal X-ray diffraction analysis of the molecular structures of CB2 and CB2B confirmed that o-carborane is appended to the aryl moiety. In photoluminescence experiments, CB2, but not CB1, showed an intense emission, assignable to intramolecular charge transfer (ICT) transition between the aryl and o-carborane moieties, in both solution and film states. On the other hand, in both solution and film states, CB1B and CB2B demonstrated a strong emission, originating from π-π * transition in the aryl groups, that tailed off to 650 nm owing to the ICT transition. All intramolecular electronic transitions in these o-carboranyl compounds were verified by theoretical calculations. These results distinctly suggest that the planarity of the aryl groups have a decisive effect on the efficiency of the radiative decay due to the ICT transition.

2-Phenylpyridine- and 2-(benzo[b]thiophen-2-yl)pyridine-based o-carboranyl compounds: impact of the structural formation of aromatic rings on photophysical properties

2-Phenylpyridine and 2-(benzo[b]thiophen-2-yl)pyridine-based o-carboranyl compounds showed intriguing emission that depended on the structural formation.

Tuning the photophysical properties of carboranyl luminophores by closo- to nido-carborane conversion and application to OFF-ON fluoride sensing

A family of closo-carborane-appended luminophores (closo-OXD1-2 and closo-DPS1-2) in which 2-R-o-carboranes (R = H, Me) are attached to the diphenyl-1,3,4-oxadiazole (OXD) or diphenyl-sulfone (DPS) acceptor groups were prepared and characterized. Deboronation of the closo-carborane cage produced the corresponding nido-carboranyl luminophores (nido-OXD1-2 and nido-DPS1-2). Whereas the closo-compounds were poorly emissive in THF (ΦPL < 0.01), the nido-luminophores exhibited an intense fluorescence with good quantum yields (ΦPL = 0.1-0.45). Electrochemical studies showed that while the closo-OXD and -DPS compounds displayed only carborane-centred, quasi-reversible reduction, the nido-compounds exhibited the typical features for nido-carborane-centred, irreversible oxidation and acceptor-centred, reversible reduction. Theoretical studies suggested that while the 1ππ* state of closo-compounds is nonemissive due to the contribution of closo-carborane to the LUMO in the S1 excited state, the intramolecular charge transfer (ICT) state from the nido-carborane to acceptor moieties in nido-compounds leads to an efficient fluorescence. Finally, THF solutions of closo-OXD1 and -DPS1 showed strong fluorescence upon the addition of fluoride anions under mild heating, but were intact to other anions, including cyanide, allowing the selective OFF-ON fluorescence sensing of fluoride.

Nido-Carboranes: Donors for Thermally Activated Delayed Fluorescence

An approach to the design of nido-carborane-based luminescent compounds that can exhibit thermally activated delayed fluorescence (TADF) is proposed. 7,8-Dicarba-nido-undecaboranes (nido-carboranes) having various 8-R groups (R=H, Me, i-Pr, Ph) are appended to the meta or para position of the phenyl ring of the dimesitylphenylborane (PhBMes₂ ) acceptor, forming donor-acceptor compounds (nido-m1-m4 and nido-p1-p4). The bulky 8-R group and meta substitution of the nido-carborane are essential to attain a highly twisted arrangement between the donor and acceptor moieties, leading to a very small energy splitting between the singlet and triplet excited states (ΔE_ST <0.05 eV for nido-m2, -m3, and -p3). These compounds exhibit efficient TADF with microsecond-range lifetimes. In particular, nido-m2 and -m3 display aggregation-induced emission (AIE) with TADF properties.

Efficient crystallization-induced emission in fluorenyl-tethered carboranes

(Aryl)(fluorenyl)-difunctionalized o-carboranes exhibit high quantum efficiency crystallization-induced emission; the origin of the CIE was rationalized from structural and theoretical studies.

Boron clusters in luminescent materials

In recent times, luminescent materials with tunable emission properties have found applications in almost all aspects of modern material sciences. Any discussion on the recent developments in luminescent materials would be incomplete if one does not account for the versatile photophysical features of boron containing compounds. Apart from triarylboranes and tetra-coordinate borate dyes, luminescent materials consisting of boron clusters have also found immense interest in recent times. Recent studies have unveiled the opportunities hidden within boranes, carboranes and metalloboranes, etc. as active constituents of luminescent materials. From simple illustrations of luminescence, to advanced applications in LASERs, OLEDs and bioimaging, etc., the unique features of such compounds and their promising versatility have already been established. In this review, recent revelations about the excellent photophysical properties of such materials are discussed.

Blue-shifted emission and enhanced quantum efficiency via π-bridge elongation in carbazole–carborane dyads

Carbazole–carborane linear and V-shaped dyads display unusual blue-shifts in charge-transfer (CT) emission on π-system lengthening; the linear dyads luminesce via a combination of local excited and CT emission, with quantum efficiencies up to 86% in solution.

The substituent effect of 2-R-o-carborane on the photophysical properties of iridium(iii) cyclometalates

The photophysical properties of heteroleptic iridium(iii) cyclometalates [4-(2-RCB)ppy]₂Ir(acac) (R = H, alkyl, aryl) with 2-R-o-carboranes at the 4-position of the ppy ligands are significantly affected by the 2-R substituent on o-carboranes.