Optofluidic-tunable color filters and spectroscopy based on liquid-crystal microflows

Electrically-driven modulation of flow patterns in liquid crystal microfludics

The flow of liquid crystals in the presence of electric fields is investigated as a possible means of flow control. The Beris-Edwards model is coupled to a free energy incorporating electric field effects. Simulations are conducted in straight channels and in junctions. Our findings reveal that local flow mediation can be achieved by the application of spatially varying electric fields. In rectangular straight channels, we report a two-stream velocity profile arising in response to the imposed electric field. Furthermore, we observe that the flow rate in each stream scales inversely with the Miesowicz viscosities, leading to the confinement of 70% of the throughput to one half of the channel. Similar flow partitioning is also demonstrated in channel junction geometries, where we show that using external fields provides a novel avenue for flow modulation in microfluidic circuits.

Optofluidic tunable filters using ionic liquid electrolyte capacitors

Tunable optical filter is a basic component for most optical systems. This study reports a unique design of Fabry-Pérot (FP) tunable filter by using an ionic liquid solution. The tunable filter consists of two neighboring regions: capacitor region and FP region. The former is in the form of electrolyte capacitor and the latter remains transparent as an FP cavity for light transmission. When the capacitor region is applied with a bias voltage, it attracts the ions from the FP region and thus reduces the ion concentration of the FP region, resulting in a change of the refractive index and eventually a shift of transmission peak of the FP cavity. Among four electrolyte solutions studied, 1-butyl-3-methylimidazolium hexafluorophosphate (BMIM-PF6) exhibits the best overall performance, such as low insertion loss (3.2 dB), large side mode suppression ratio (23 dB) and high stability (drift <0.2 nm). Additionally, a wavelength tuning of 0.17 nm/V is achieved over 0-17 V, providing a tunable range of 3 nm. This device features low bias voltage, no mechanical movement, easy fabrication and seamless integration with microfluidics systems, and may find potential applications in spectral analyzers and lab-on-a-chip biosensing systems.

Curvature-mediated programming of liquid crystal microflows

Despite the recognized role of liquid crystal microfluidics in generating programmable, self-organized and guided flow properties, to date, the flow behavior of LCs within curved channels remains unexplored. Using experiments and numerical simulations, we demonstrate that the curvature of microscale conduits allow programming of liquid crystal (LC) flows. Focusing on a nematic LC flowing through U- and L-shaped channels - two simple yet fundamental curved flow paths - with rectangular cross-section, our results reveal that the curvature of flow path can trigger transverse flow-induced director gradients. The emergent director field feeds back into the flow field, ultimately leading to LC flows controlled by the channel curvature. This curvature-mediated flow control, identified by polarizing optical microscopy and supported by the nematofluidic solutions, offers concepts in LC microfluidic valves, wherein the throughput distribution is determined by the Ericksen number and variations in local curvature. Finally, this work leverages curvature to amplify (suppress) LC transport through flow-aligned (homeotropic) regions emerging within channels with bends, in a programmable manner. Our results demonstrating the dependence of the dynamic flow-director coupling on the local curvature will have far-reaching ramifications in advancing the understanding of LC-based passive and active biological systems under real life geometrical constraints.

Light Propagation in Confined Nematic Liquid Crystals and Device Applications

Liquid crystals are interesting linear and nonlinear optical materials used to make a wide variety of devices beyond flat panel displays. Liquid crystalline materials can be used either as core or as cladding of switchable/reconfigurable waveguides with either an electrical or an optical control or both. In this paper, materials and main device structures of liquid crystals confined in different waveguide geometries are presented using different substrate materials, such as silicon, soda lime or borosilicate glass and polydimethylsiloxane. Modelling of the behaviour of liquid crystal nanometric molecular reorientation and related refractive index distribution under both low-frequency electric and intense optical fields is reported considering optical anisotropy of liquid crystals. A few examples of integrated optic devices based on waveguides using liquid crystalline materials as core for optical switching and filtering are reviewed. Reported results indicate that low-power control signals represent a significant feature of photonic devices based on light propagation in liquid crystals, with performance, which are competitive with analogous integrated optic devices based on other materials for optical communications and optical sensing systems.

Novel optofluidic concepts enabled by topological microfluidics-INVITED

The coupling between flow and director orientation of liquid crystals (LCs) has been long utilized to devise wide-ranging applications spanning modern displays, medical and environmental solutions, and bio-inspired designs and applications. LC-based optofluidic platforms offer a non-invasive handle to modulate light and material fields, both locally and dynamically. The flow-driven reorientation of the LC molecules can tailor distinct optical and mechanical responses in microfluidic confinements, and harness the coupling therein. Yet the synergy between traditional optofluidics with isotropic fluids and LC microfluidics remains at its infancy. Here, we discuss emerging optofluidic concepts based on Topological Microfluidics, leveraging microfluidic control of topological defects and defect landscapes. With a specific focus on the role of surface anchoring and microfluidic geometry, we present recent and ongoing works that harness flow-controlled director and defect configurations to modulate optical fields. The flow-induced optical attributes, and the corresponding feedback, is enhanced in the vicinity of the topological defects which geenerate distinct isotropic opto-material properties within an anisotropic matrix. By harnessing the rich interplay of confining geometry, anchoring and micro-scale nematodynamics, topological microfluidics offers a promising platform to ideate the next generation of optofluidic and optomechnical concepts.

Time Dependent Lyotropic Chromonic Textures in Microfluidic Confinements

Nematic and columnar phases of lyotropic chromonic liquid crystals (LCLCs) have been long studied for their fundamental and applied prospects in material science and medical diagnostics. LCLC phases represent different self-assembled states of disc-shaped molecules, held together by noncovalent interactions that lead to highly sensitive concentration and temperature dependent properties. Yet, microscale insights into confined LCLCs, specifically in the context of confinement geometry and surface properties, are lacking. Here, we report the emergence of time dependent textures in static disodium cromoglycate (DSCG) solutions, confined in PDMS-based microfluidic devices. We use a combination of soft lithography, surface characterization, and polarized optical imaging to generate and analyze the confinement-induced LCLC textures and demonstrate that over time, herringbone and spherulite textures emerge due to spontaneous nematic (N) to columnar M-phase transition, propagating from the LCLC-PDMS interface into the LCLC bulk. By varying the confinement geometry, anchoring conditions, and the initial DSCG concentration, we can systematically tune the temporal dynamics of the N- to M-phase transition and textural behavior of the confined LCLC. Overall, the time taken to change from nematic to the characteristic M-phase textures decreased as the confinement aspect ratio (width/depth) increased. For a given aspect ratio, the transition to the M-phase was generally faster in degenerate planar confinements, relative to the transition in homeotropic confinements. Since the static molecular states register the initial conditions for LC flows, the time dependent textures reported here suggest that the surface and confinement effects—even under static conditions—could be central in understanding the flow behavior of LCLCs and the associated transport properties of this versatile material.

Microfluidic control over topological states in channel-confined nematic flows

Compared to isotropic liquids, orientational order of nematic liquid crystals makes their rheological properties more involved, and thus requires fine control of the flow parameters to govern the orientational patterns. In microfluidic channels with perpendicular surface alignment, nematics discontinuously transition from perpendicular structure at low flow rates to flow-aligned structure at high flow rates. Here we show how precise tuning of the driving pressure can be used to stabilize and manipulate a previously unresearched topologically protected chiral intermediate state which arises before the homeotropic to flow-aligned transition. We characterize the mechanisms underlying the transition and construct a phenomenological model to describe the critical behaviour and the phase diagram of the observed chiral flow state, and evaluate the effect of a forced symmetry breaking by introduction of a chiral dopant. Finally, we induce transitions on demand through channel geometry, application of laser tweezers, and careful control of the flow rate.

It is interesting phenomenon that chiral order can emerge in intrinsically achiral liquid crystals. Here Čopar et al. demonstrate achiral-to-chiral transition of the nematic liquid crystals flow in microfluidic channels and their behaviour, stability, and dependence on geometric and material parameters.

Shear-Induced Alignment of Anisotropic Nanoparticles in a Single-Droplet Oscillatory Microfluidic Platform

Flow-induced alignment of shape-anisotropic colloidal particles is of great importance in fundamental research and in the fabrication of structurally anisotropic materials; however, rheo-optical studies of shear-induced particle orientation are time- and labor-intensive and require complicated experimental setups. We report a single-droplet oscillatory microfluidic strategy integrated with in-line polarized light imaging as a strategy for studies of shear-induced alignment of rod-shape nanoparticles. Using an oscillating droplet of an aqueous isotropic suspension of cellulose nanocrystals (CNCs), we explore the effect of the shear rate and suspension viscosity on the flow-induced CNC alignment and subsequent relaxation to the isotropic state. The proposed microfluidic strategy enables high-throughput studies of shear-induced orientations in structured liquid under precisely controlled experimental conditions. The results of such studies can be used in the development of structure-anisotropic materials.

Cross-talk between topological defects in different fields revealed by nematic microfluidics

Topological defects are singularities in material fields that play a vital role across a range of systems: from cosmic microwave background polarization to superconductors and biological materials. Although topological defects and their mutual interactions have been extensively studied, little is known about the interplay between defects in different fields-especially when they coevolve-within the same physical system. Here, using nematic microfluidics, we study the cross-talk of topological defects in two different material fields-the velocity field and the molecular orientational field. Specifically, we generate hydrodynamic stagnation points of different topological charges at the center of star-shaped microfluidic junctions, which then interact with emergent topological defects in the orientational field of the nematic director. We combine experiments and analytical and numerical calculations to show that a hydrodynamic singularity of a given topological charge can nucleate a nematic defect of equal topological charge and corroborate this by creating [Formula: see text], [Formula: see text], and [Formula: see text] topological defects in four-, six-, and eight-arm junctions. Our work is an attempt toward understanding materials that are governed by distinctly multifield topology, where disparate topology-carrying fields are coupled and concertedly determine the material properties and response.

Highly sensitive on-chip fluorescence sensor with integrated fully solution processed organic light sources and detectors

The first reported on-chip fluorescent sensor consisting of fully solution processed organic light sources and detectors.

Light filter tailoring – the impact of light emitting diode irradiation on the morphology and optical properties of silver nanoparticles within polyethylenimine thin films

In this contributionin situemission filter generation for,e.g.fluorescence light detection by morphology tailoring of silver nanoparticles within a polymer layer, is presented for the first time.

Microfluidic flow of cholesteric liquid crystals

We explore the rheology and flow-induced morphological changes of cholesteric liquid crystal patterns subject to Poiseuille flow within a slab geometry, and under different anchoring conditions at the wall. Our focus is particularly on the behaviour of "Cholesteric Fingers of the first kind" and of Blue Phase II. Depending on the applied pressure gradient, we observe a number of dynamic regimes with different rheological properties. Our results provide the first insight into the flow response of cholesteric phases with fully two- or three-dimensional director field patterns and normal and planar degenerate anchoring conditions as commonly realised in experiments. They are also of high relevance for a fundamental understanding of complex liquid crystals in confinement and an important step towards future microfluidic applications that are based on cholesteric liquid crystals.

Flexible optofluidic waveguide platform with multi-dimensional reconfigurability

Dynamic reconfiguration of photonic function is one of the hallmarks of optofluidics. A number of approaches have been taken to implement optical tunability in microfluidic devices. However, a device architecture that allows for simultaneous high-performance microfluidic fluid handling as well as dynamic optical tuning has not been demonstrated. Here, we introduce such a platform based on a combination of solid- and liquid-core polydimethylsiloxane (PDMS) waveguides that also provides fully functioning microvalve-based sample handling. A combination of these waveguides forms a liquid-core multimode interference waveguide that allows for multi-modal tuning of waveguide properties through core liquids and pressure/deformation. We also introduce a novel lifting-gate lightvalve that simultaneously acts as a fluidic microvalve and optical waveguide, enabling mechanically reconfigurable light and fluid paths and seamless incorporation of controlled particle analysis. These new functionalities are demonstrated by an optical switch with >45 dB extinction ratio and an actuatable particle trap for analysis of biological micro- and nanoparticles.

Sensing and tuning microfiber chirality with nematic chirogyral effect

Microfibers with their elongated shape and translation symmetry can act as important components in various soft materials, notably for their mechanics on the microscopic level. Here we demonstrate the mechanical response of a micro-object to imposed chirality, in this case, the tilt of disclination rings in an achiral nematic medium caused by the chiral surface anchoring on an immersed microfiber. This coupling between chirality and mechanical response, used to demonstrate sensing of chirality of electrospun cellulose microfibers, is revealed in the optical micrographs due to anisotropy in the elastic response of the host medium. We provide an analytical explanation of the chirogyral effect supported with numerical simulations and perform an experiment to test the effect of the cell confinement and fiber size. We controllably twist the microfibers and demonstrate the response of the nematic medium. More generally the demonstrated study provides means for experimental discrimination of surface properties and allows mechanical control over the shape of disclination rings.

Light driven optofluidic switch developed in a ZnO-overlaid microstructured optical fiber

A great challenge of Optofluidics remains the control of the fluidic properties of a photonic circuit by solely utilizing light. In this study, the development of a ZnO nanolayered microstructured optical fiber (MOF) Fabry-Perot interferometer is demonstrated, along with its fully reversible optofluidic switching behaviour. The actuation and switching principle is entirely based on the employment of light sources, i.e. UV 248 nm and green 532 nm lasers, while using modest irradiation doses. The synthesized ZnO within the MOF capillaries acts as a light triggered wettability transducer, allowing the controlled water filling and draining of the MOF Fabry-Perot cavity. The progression of the optofluidic cycle is monitored in situ with optical microscopy, while Fabry-Perot reflection spectra are monitored in real time to probe temporal infiltration behaviour. Finally, a first insight on the light triggered switching mechanism, employing photoluminescence and spectrophotometric measurements is presented. Results appear highly promising towards the design of smart in-fiber optofluidic light switching devices, suitable for actuating and sensing applications.

Transport of particles in liquid crystals

Colloidal particles in a liquid crystal (LC) behave very differently from their counterparts in isotropic fluids. Elastic nature of the orientational order and surface anchoring of the director cause long-range anisotropic interactions and lead to the phenomenon of levitation. The LC environment enables new mechanisms of particle transport that are reviewed in this work. Among them the motion of particles caused by gradients of the director, and effects in the electric field: backflow powered by director reorientations, dielectrophoresis in LC with varying dielectric permittivity and LC-enabled nonlinear electrophoresis with velocity that depends on the square of the applied electric field and can be directed differently from the field direction.