Enhanced Catalytic Hydrogen Peroxide Production from Hydroxylamine Oxidation on Modified Activated Carbon Fibers: The Role of Surface Chemistry

Herein, direct production of hydrogen peroxide (H2O2) through hydroxylamine (NH2OH) oxidation by molecular oxygen was greatly enhanced over modified activated carbon fiber (ACF) catalysts. We revealed that the higher content of pyrrolic/pyridone nitrogen (N5) and carboxyl-anhydride oxygen could effectively promote the higher selectivity and yield of H2O2. By changing the volume ratio of the concentrated H2SO4 and HNO3, the content of N5 and surface oxygen containing groups on ACF were selectively tuned. The ACF catalyst with the highest N5 content and abundant carboxyl-anhydride oxygen containing groups was demonstrated to have the highest activity toward catalytic H2O2 production, enabling the selectivity of H2O2 over 99.3% and the concentration of H2O2 reaching 123 mmol/L. The crucial effects of nitrogen species were expounded by the correlation of the selectivity of H2O2 with the content of N5 from X-ray photoelectron spectroscopy (XPS). The possible reaction pathway over ACF catalysts promoted by N5 was also shown.

Enantioselective Hydroxylation of Benzylic C(sp3)-H Bonds by an Artificial Iron Hydroxylase Based on the Biotin-Streptavidin Technology

The selective hydroxylation of C–H bonds is of great interest to the synthetic community. Both homogeneous catalysts and enzymes offer complementary means to tackle this challenge. Herein, we show that biotinylated Fe(TAML)-complexes (TAML = Tetra Amido Macrocyclic Ligand) can be used as cofactors for incorporation into streptavidin to assemble artificial hydroxylases. Chemo-genetic optimization of both cofactor and streptavidin allowed optimizing the performance of the hydroxylase. Using H₂O₂ as oxidant, up to ∼300 turnovers for the oxidation of benzylic C–H bonds were obtained. Upgrading the ee was achieved by kinetic resolution of the resulting benzylic alcohol to afford up to >98% ee for (R)-tetralol. X-ray analysis of artificial hydroxylases highlights critical details of the second coordination sphere around the Fe(TAML) cofactor.

Targeting of High-Valent Iron-TAML Activators at Hydrocarbons and Beyond

TAML activators of peroxides are iron(III) complexes. The ligation by four deprotonated amide nitrogens in macrocyclic motifs is the signature of TAMLs where the macrocyclic structures vary considerably. TAML activators are exceptional functional replicas of the peroxidases and cytochrome P450 oxidizing enzymes. In water, they catalyze peroxide oxidation of a broad spectrum of compounds, many of which are micropollutants, compounds that produce undesired effects at low concentrations-as with the enzymes, peroxide is typically activated with near-quantitative efficiency. In nonaqueous solvents such as organic nitriles, the prototype TAML activator gave the structurally authenticated reactive iron(V)oxo units (Fe^VO), wherein the iron atom is two oxidation equivalents above the Fe^III resting state. The iron(V) state can be achieved through the intermediacy of iron(IV) species, which are usually μ-oxo-bridged dimers (Fe^IVFe^IV), and this allows for the reactivity of this potent reactive intermediate to be studied in stoichiometric processes. The present review is primarily focused at the mechanistic features of the oxidation by Fe^VO of hydrocarbons including cyclohexane. The main topic is preceded by a description of mechanisms of oxidation of thioanisoles by Fe^VO, because the associated studies provide valuable insight into the ability of Fe^VO to oxidize organic molecules. The review is opened by a summary of the interconversions between Fe^III, Fe^IVFe^IV, and Fe^VO species, since this information is crucial for interpreting the kinetic data. The highest reactivity in both reaction classes described belongs to Fe^VO. The resting state Fe^III is unreactive oxidatively. Intermediate reactivity is typically found for Fe^IVFe^IV; therefore, kinetic features for these species in interchange and oxidation processes are also reviewed. Examples of using TAML activators for C-H bond cleavage applied to fine organic synthesis conclude the review.

Spectroscopic investigation and direct comparison of the reactivities of iron pyridyl oxidation catalysts

The growing interest in green chemistry has fueled attention to the development and characterization of effective iron complex oxidation catalysts. A number of iron complexes are known to catalyze the oxidation of organic substrates utilizing peroxides as the oxidant. Their development is complicated by a lack of direct comparison of the reactivities of the iron complexes. To begin to correlate reactivity with structural elements, we compare the reactivities of a series of iron pyridyl complexes toward a single dye substrate, malachite green (MG), for which colorless oxidation products are established. Complexes with tetradentate, nitrogen-based ligands with cis open coordination sites were found to be the most reactive. While some complexes reflect sensitivity to different peroxides, others are similarly reactive with either H₂O₂ or tBuOOH, which suggests some mechanistic distinctions. [Fe(S,S-PDP)(CH₃CN)₂](SbF₆)₂ and [Fe(OTf)₂(tpa)] transition under the oxidative reaction conditions to a single intermediate at a rate that exceeds dye degradation (PDP=bis(pyridin-2-ylmethyl) bipyrrolidine; tpa=tris(2-pyridylmethyl)amine). For the less reactive [Fe(OTf)₂(dpa)] (dpa=dipicolylamine), this reaction occurs on a timescale similar to that of MG oxidation. Thus, the spectroscopic method presented herein provides information about the efficiency and mechanism of iron catalyzed oxidation reactions as well as about potential oxidative catalyst decomposition and chemical changes of the catalyst before or during the oxidation reaction.

Effect of textual features and surface properties of activated carbon on the production of hydrogen peroxide from hydroxylamine oxidation

Herein, the textural features and surface properties of activated carbon were mediated by oxidation in the gas-phase or liquid-phase.

Activation of Dioxygen by a TAML Activator in Reverse Micelles: Characterization of an Fe(III)Fe(IV) Dimer and Associated Catalytic Chemistry

Iron TAML activators of peroxides are functional catalase-peroxidase mimics. Switching from hydrogen peroxide (H2O2) to dioxygen (O2) as the primary oxidant was achieved by using a system of reverse micelles of Aerosol OT (AOT) in n-octane. Hydrophilic TAML activators are localized in the aqueous microreactors of reverse micelles where water is present in much lower abundance than in bulk water. n-Octane serves as a proximate reservoir supplying O2 to result in partial oxidation of Fe(III) to Fe(IV)-containing species, mostly the Fe(III)Fe(IV) (major) and Fe(IV)Fe(IV) (minor) dimers which coexist with the Fe(III) TAML monomeric species. The speciation depends on the pH and the degree of hydration w0, viz., the amount of water in the reverse micelles. The previously unknown Fe(III)Fe(IV) dimer has been characterized by UV-vis, EPR, and Mössbauer spectroscopies. Reactive electron donors such as NADH, pinacyanol chloride, and hydroquinone undergo the TAML-catalyzed oxidation by O2. The oxidation of NADH, studied in most detail, is much faster at the lowest degree of hydration w0 (in "drier micelles") and is accelerated by light through NADH photochemistry. Dyes that are more resistant to oxidation than pinacyanol chloride (Orange II, Safranine O) are not oxidized in the reverse micellar media. Despite the limitation of low reactivity, the new systems highlight an encouraging step in replacing TAML peroxidase-like chemistry with more attractive dioxygen-activation chemistry.