Carboxymethyl potato starch hydrogels encapsulated cyclodextrin metal-organic frameworks for enantioselective loading of S-naproxen and its programmed release

A natural polysaccharide-based vehicle is facilely prepared for enantioselective loading of S-naproxen (S-NPX) and its programmed release. Cyclodextrin metal-organic frameworks (CD-MOF) are synthesized through the coordination of K+ with γ-cyclodextrin (γ-CD). Compared with R-NPX, the CD-MOF preferably combines with S-NPX, which can be confirmed by the thermodynamic calculations. The S-NPX loaded CD-MOF (CD-MOF-S-NPX) is grafted with disulfide bond (-S-S-) to improve its hydrophobicity, and the loaded S-NPX is further encapsulated in the chiral cavity of γ-CD by carboxymethyl potato starch (CPS) hydrogels. The intermolecular hydrogen bonding of the CPS hydrogels is prone to be destroyed in mildly basic media (∼pH 8.0), resulting in the swelling of the hydrogels; the -S-S- linkage in the vehicle can be cleaved in the presence of glutathione (GSH), leading to the collapse of the CD-MOF. Therefore, the programmed release of S-NPX can be achieved. Also in this work, the release kinetics is investigated, and the results indicate that the release of S-NPX is controlled by the Higuchi model.

Simultaneous Adsorption and Reduction of Cr(VI) to Cr(III) in Aqueous Solution Using Nitrogen-Rich Aminal Linked Porous Organic Polymers

Two novel nitrogen-rich aminal linked porous organic polymers, NRAPOP-O and NRAPOP-S, have been prepared using a single step-one pot Schiff-base condensation reaction of 9,10-bis-(4,6-diamino-S-triazin-2-yl)benzene and 2-furaldehyde or 2-thiophenecarboxaldehyde, respectively. The two polymers show excellent thermal and physiochemical stabilities and possess high porosity with Brunauer–Emmett–Teller (BET) surface areas of 692 and 803 m2 g−1 for NRAPOP-O and NRAPOP-S, respectively. Because of such porosity, attractive chemical and physical properties, and the availability of redox-active sites and physical environment, the NRAPOPs were able to effectively remove Cr(VI) from solution, reduce it to Cr(III), and simultaneously release it into the solution. The efficiency of the adsorption process was assessed under various influencing factors such as pH, contact time, polymer dosage, and initial concentration of Cr(VI). At the optimum conditions, 100% removal of Cr(VI) was achieved, with simultaneous reduction and release of Cr(III) by NRAPOP-O with 80% efficiency. Moreover, the polymers can be easily regenerated by the addition of reducing agents such as hydrazine without significant loss in the detoxication of Cr(VI).

Synthesis of core-shell UiO-66-poly(m-phenylenediamine) composites for removal of hexavalent chromium

The present research developed a direct in situ heterogeneous method to synthesize UiO-66-poly(m-phenylenediamine) core-shell nanostructures by inducing assembly of m-phenylenediamine radical on UiO-66 surfaces. The strong interaction between negative charged UiO-66 and positive radical from the oxidation of monomer is the major driving force. The produced UiO-66-poly(m-phenylenediamine) composites exhibited a distinct core-shell morphology with controllable surface features. The UiO-66₁-PmPD_0.5 showed a uniform PmPD shell with a thickness of 40-60 nm and the nanocomposite exhibited a high specific surface area of 319.77 m² g^-1. Moreover, the Cr(VI) adsorption amount of the polymeric shell in the nanocomposites can reach as high as 745 mg g^-1, far beyond the performance of the original PmPD. The adsorption tends to be equilibrium within 300 min. This research opens a hopeful window for facile and large-scale fabrication of core-shell nanostructures with controllable core-shell configuration, exhibiting high prospect in heavy metal removal from water.

Enhanced adsorption-coupled reduction of hexavalent chromium by 2D poly(m-phenylenediamine)-functionalized reduction graphene oxide

To improve the mass transfer efficiency of poly(m-phenylenediamine) for the effective removal of hexavalent chromium (Cr (VI)) from aqueous solution, a facile and one-step method to prepare two-dimensional poly(m-phenylenediamine) functionalized reduction graphene oxide (rGO-PmPD) by dilution polymerization is developed. The structure and morphology of rGO-PmPD as well as rGO and PmPD were characterized by scanning electron microscope (SEM), transmission electron microscope (TEM), Brunauer-Emmett-Teller (BET), Fourier-transformed infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), Raman, and X-ray diffraction (XRD). The preparation mechanism, adsorption performance, and mechanism of rGO-PmPD were then investigated in detail. The obtained rGO-PmPD exhibited thin 2D nanosheet morphology with much improved specific surface area and pore volume (18 and 25 times higher than that of PmPD, respectively). The Cr (VI) adsorption of rGO-PmPD was fitted well with the pseudo-second-order kinetic model and Langmuir isotherm model, and the maximum adsorption capacity of rGO-PmPD reached 588.26 mg g^-1, higher than that of PmPD (400 mg g^-1) and rGO (156.25 mg g^-1). Moreover, the regeneration efficiency of the rGO-PmPD nanosheet is also promising that the adsorption performance after five times of adsorption-desorption cycles still maintains more than 530 mg g^-1. The removal mechanism involved reduction coupled with adsorption and electrostatic interaction between rGO-PmPD and Cr (VI), and ~ 65% of Cr (VI) removal was attributed to reduction and ~ 35% was ascribed to adsorption and electrostatic interaction. This study thus provides a simple and effective route to achieve high accessible surface area of adsorbent materials with enhanced mass transfer efficiency and thereafter improved adsorption performance.

The chemistry of Cr(VI) adsorption on to poly(p-phenylenediamine) adsorbent

Water pollution due to industrial processes has necessitated and spurred robust research into the development of adsorbent materials for remediation. Polyphenylenediamines (PPD) have attracted significant attention because of their dual cationic and redox properties. They are able to reduce Cr(VI) to Cr(III) in solution. Interrogation of the chemical processes involved in the Cr(VI) adsorption on para-PPD was primarily by X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared (FT-IR) spectroscopy. It was confirmed that the underlying oxidation of the amino groups to imines during the reduction of Cr(VI) to Cr(III) was irreversible. This process occurred at both acidic and alkaline conditions. Reduction was accompanied by Cr(III) chelation on the adsorbent surface. Further, regeneration with dilute aqueous NaOH and HCl extended the polymer's adsorptive capacity beyond exhaustion of its redox potentials.

Simultaneous functionalization and magnetization of biochar via NH3 ambiance pyrolysis for efficient removal of Cr (VI)

Enhancing biochar adsorption capabilities and recollection ability is essential for efficient biochar application. In this study, Nitrogen-doped magnetic biochar was prepared via one-step heating of FeCl₃-laden agar biomass under NH₃ environment. Synthesized magnetic biochar ABF-N₈₀₀ shows a maximum Cr (VI) adsorption capacity up to 142.86 mg g^-1, outperforming that of magnetic biochar and many other previously reported materials. Moreover, a significant increase of magnetic properties obtained by NH₃ ambiance pyrolysis enables easy separation of the adsorbent from the solution after treated with Cr (VI). The physiochemical properties of composites characterized by SEM, EDS, XRD, XPS, VSM, BET surface and pore, Elemental content, and FTIR analysis. The NH₃ ambiance pyrolysis confirmed as an efficient process for surface modification, increased magnetic properties and activated N-functional groups. The Langmuir isotherm model and pseudo-second-order model are applicable for describing adsorption behavior. The thermodynamic study shows that the adsorption was spontaneous and endothermic. The present results warrant the application of simultaneous functionalized and magnetized biochar for Cr (VI) contaminated wastewater treatment.

Comparative study of remediation of Cr(VI)-contaminated soil using electrokinetics combined with bioremediation

The purpose of this research is to design a new bioremediation-electrokinetic (Bio-EK) remediation process to increase treatment efficiency of chromium contamination in soil. Upon residual chromium analysis, it is shown that traditional electrokinetic-PRB system (control) does not have high efficiency (80.26%) to remove Cr(VI). Bio-electrokinetics of exogenous add with reduction bacteria Microbacterium sp. Y2 and electrokinetics can enhance treatment efficiency Cr(VI) to 90.67% after 8 days' remediation. To optimize the overall performance, integrated bio-electrokinetics were designed by synergy with 200 g humic substances (HS) into the systems. According to our results, Cr(VI) (98.33%) was effectively removed via electrokinetics. Moreover, bacteria and humic substances are natural, sustainable, and economical enhancement agents. The research results indicated that the use of integrated bio-electrokinetics is an effective method to remediate chromium-contaminated soils.

Ultrafiltration membrane for effective removal of chromium ions from potable water

The objective of the present work was to investigate the efficacy of indigenously developed polyacrylonitrile (PAN) based ultrafiltration (UF) membrane for chromium ions removal from potable water. The hydrolyzed PAN membranes effectively rejected chromium anions in the feed ranging from 250 ppb to 400 ppm and a rejection of ≥90% was achieved for pH ≥ 7 at low chromate concentration (≤25 ppm) in feed. The rejection mechanism of chromium ions was strongly dependent on Donnan exclusion principle, while size exclusion principle for UF did not play a major role on ions rejection. Feed pH played a vital role in changing porosity of membrane, which influenced the retention behavior of chromate ions. Cross-flow velocity, pressure did not play significant role for ions rejection at low feed concentration. However, at higher feed concentration (≥400 ppm), concentration polarization became important and it reduced the chromate rejection to 32% at low cross flow and high pressure. Donnan steric-partitioning pore and dielectric exclusion model (DSPM-DE) was applied to evaluate the chromate ions transport through PAN UF membrane as a function of flux by using optimized model parameters and the simulated data matched well with experimental results.

One-pot synthesis of nitrogen-enriched carbon spheres for hexavalent chromium removal from aqueous solution

Nitrogen-enriched carbon spheres (NECS) with high nitrogen content (10.21 wt%) had been prepared and presented superior Cr(vi) removal capacity as high as 279 mg g⁻¹.

Temperature based adsorption studies of Cr(vi) using p-toluidine formaldehyde resin coated silica material

A PTFR coated silica material was developed, characterised and applied for the treatment of hexavalent chromium.

From nanorods of palygorskite to nanosheets of smectite via a one-step hydrothermal process

The structural evolution of silicate opens a new avenue to cognize its microstructure, intensify its properties and extend its application.

High-yield synthesis of poly(m-phenylenediamine) hollow nanostructures by a diethanolamine-assisted method and their enhanced ability for Ag+ adsorption

DEA induces the formation of PmPD hollow nanostructures which exhibit improved adsorption performance.