One-pot synthesis of iron oxide - Gamma irradiated chitosan modified SBA-15 mesoporous silica for effective methylene blue dye removal

The development of adsorption technology and the processing of radiation have both been influenced by chitosan adsorbent (γ-chitosan), a raw material with unique features. The goal of the current work was to improve the synthesis of Fe-SBA-15 utilizing chitosan that has undergone gamma radiation (Fe-γ-CS-SBA-15) in order to investigate the removal of methylene blue dye in a single hydrothermal procedure. High-resolution transmission electron microscopy (HRTEM), High angle annular dark field scanning transmission electron microscopy (HAADF-STEM), small- and wide-angle X-ray powder diffraction (XRD), Fourier transform-infrared spectroscopy (FT-IR) and Energydispersive X-ray spectroscopy (EDS) were used to characterize γ-CS-SBA-15 that had been exposed to Fe. By using N₂-physisorption (BET, BJH), the structure of Fe-γ-CS-SBA-15 was investigated. The study parameters also included the effect of solution pH, adsorbent dose and contact time on the methylene blue adsorption. The elimination efficiency of the methylene blue dye was compiled using a UV-VIS spectrophotometer. The results of the characterization show that the Fe-γ-CS-SBA-15 has a substantial pore volume of 504 m² g^-1 and a surface area of 0.88 cm³ g^-1. Furthermore, the maximum adsorption capacity (Q_max) of the methylene blue is 176.70 mg/g. The γ-CS can make SBA-15 operate better. It proves that the distribution of Fe and chitosan (the C and N components) in SBA-15 channels is uniform.

U(VI) binding onto electrospun polymers functionalized with phosphonate surfactants

We previously observed that phosphonate functionalized electrospun nanofibers can uptake U(VI), making them promising materials for sensing and water treatment applications. Here, we investigate the optimal fabrication of these materials and their mechanism of U(VI) binding under the influence of environmentally relevant ions (e.g., Ca²⁺ and CO 3 2 - ). We found that U(VI) uptake was greatest on polyacrylonitrile (PAN) functionalized with longer-chain phosphonate surfactants (e.g., hexa- and octadecyl phosphonate; HDPA and ODPA, respectively), which were better retained in the nanofiber after surface segregation. Subsequent uptake experiments to better understand specific solid-liquid interfacial interactions were carried out using 5 mg of HDPA-functionalized PAN mats with 10 μM U at pH 6.8 in four systems with different combinations of solutions containing 5 mM calcium (Ca²⁺) and 5 mM bicarbonate ( HCO 3 - ). U uptake was similar in control solutions containing no Ca²⁺ and HCO 3 - (resulting in 19 ± 3% U uptake), and in those containing only 5 mM Ca²⁺ (resulting in 20 ± 3% U uptake). A decrease in U uptake (10 ± 4% U uptake) was observed in experiments with HCO 3 - , indicating that UO₂-CO₃ complexes may increase uranium solubility. Results from shell-by-shell EXAFS fitting, aqueous extractions, and surface-enhanced Raman scattering (SERS) indicate that U is bound to phosphonate as a monodentate inner sphere surface complex to one of the hydroxyls in the phosphonate functional groups. New knowledge derived from this study on material fabrication and solid-liquid interfacial interactions will help to advance technologies for use in the in-situ detection and treatment of U in water.

Shear-induced fabrication of SiO2 nano-meshes for efficient uranium capture

The extraction of uranium from seawater and the safe treatment of wastewater containing uranium (VI) were important to ensure the sustainable development of nuclear-related energy sources. Two-dimensional silica nanomaterials have been extensively investigated in the field of uranium adsorption due to their high adsorption capacity, short equilibration times, and easily modified surface groups. However, the two-dimensional mesoporous silica nanomaterial preparation has become a challenge due to the lack of natural sheet templating agents. The reason will hinder the development of silica nanomaterials for uranium extraction. Here, the specific surface area silica nanomeshes (HSMSMs) uranium adsorbent was prepared by a high shear method to induce nanobubble formation. HSMSMs showed a high uranium adsorption capacity of 822 mg_-U/g_-abs in seawater with the uranium adsorption concentration was 50 mg/L, which was approximately 2 times higher than the conventional mesoporous silica nanomaterials. Compared to HSMSMs, the amidoxime-modified high specific surface area silica nanomesh (HSMSMs-AO) demonstrated good selectivity for U(VI), and the uranium ions uptake was 877 mg_-U/g_-abs in 50 mg/L uranium-spiked simulated seawater. Due to HSMSMs-AO's stable chemical properties and high mechanical strength, HSMSMs-AO also displayed long service life. Benefiting from the simple preparation method and high adsorption capacity of HSMSMs, HSMSMs could be a promising candidate for large-scale extraction of uranium from seawater.

Functionalized Mesoporous Silicon Nanomaterials in Inorganic Soil Pollution Research: Opportunities for Soil Protection and Advanced Chemical Imaging

"Innovative actions towards a pollution free-planet" is a goal of the United Nations Environment Assembly (UNEA). Aided by both the Food and Agricultural Organisation (FAO) and its Global Soil Partnership under the 3rd UNEA resolution, a consensus from > 170 countries have agreed a need for accelerated action and collaboration to combat soil pollution. This initiative has been tasked to find new and improved solutions to prevent and reduce soil pollution, and it is in this context that this review provides an updated perspective on an emerging technology platform that has already provided demonstrable utility for measurement, mapping, and monitoring of toxic trace elements (TTEs) in soils, in addition to the entrapment, removal, and remediation of pollutant sources. In this article, the development and characteristics of functionalized mesoporous silica nanomaterials (FMSN) will be discussed and compared with other common metal scavenging materials. The chemistries of the common functionalizations will be reviewed, in addition to providing an outlook on some of the future directions/applications of FMSN. The use of FMSN in soil will be considered with some specific case studies focusing on Hg and As. Finally, the advantages and developments of FMSN in the widely used diffusive gradients-in-thin films (DGT) technique will be discussed, in particular, its advantages as a DGT substrate for integration with oxygen planar optodes in multilayer systems that provide 2D mapping of metal pollutant fluxes at submillimeter resolution, which can be used to measure detailed sediment-water fluxes as well as soil-root interactions, to predict plant uptake and bioavailability.

Bifunctional Phosphorylcholine-Modified Adsorbent with Enhanced Selectivity and Antibacterial Property for Recovering Uranium from Seawater

The recovery of uranium from seawater is of great concern because of the growing demand for nuclear energy. Though amidoxime-functionalized adsorbents as the most promising adsorbents have been widely used for this purpose, their low selectivity and vulnerability to biofouling have limited their application in real marine environments. Herein, a new bifunctional phosphorylcholine-modified adsorbent (PVC-PC) is disclosed. The PVC-PC fiber is found to be suitable for use in the pH range of seawater and metals that commonly coexist with uranium, such as alkali and alkaline earth metals, transition metals, and lanthanide metals, have no obvious effect on its uranium adsorption capacity. PVC-PC shows better selectivity and adsorption capacity than the commonly used amidoxime-functionalized adsorbent. Furthermore, PVC-PC fiber exhibits excellent antibacterial properties which could reduce the effects of biofouling caused by marine microorganisms. Because of its good selectivity and antibacterial property, phosphorylcholine-based material shows great potential as a new generation adsorbent for uranium recovery from seawater.

Economic and Efficient phosphonic functional groups mesoporous silica for uranium selective adsorption from aqueous solutions

A novel mesoporous silica with enhanced phosphonic functional groups (PFGs) and without any silane agents was provided by Sol-Gel technique for selective adsorption of U(VI) from aqueous solutions (AqS). The absorbent was synthesized based on the achieving the four best performance characteristics including availability, economically, adsorption efficiency, and selectivity which are undoubtedly defined the usefulness of the adsorbents. The sorption results exhibited the highest uranium adsorption capacity, qe, of 820.7 mg/g at pH ≈ 8 which indicated the adsorbent is the best alternative for uranium adsorption from the nearly neutral solutions such as seawater. The recovery percentages by the adsorbent in the aqueous environments involving other elements such as Mg, Cd, Hg, As, Ca, Na, Ni and the salty environment with high concentration of Cl- ions are indicated that the adsorbent presents the acceptable selectivity for uranium adsorption from the AqS such as industrial wastewater. Several activities and factors including removing the silane agents, using sodium metasilicate as an available and low-cost source of silica, and using the Sol-gel method as an unexpansive synthesis technique caused to reduce the synthesis costs from 222.787 EUR/kg for the template method to 60.078 EUR/kg for Sol-gel method which confirm the synthesis of a cost-effective adsorbent.

Petroleum pitch-based porous aromatic frameworks with phosphonate ligand for efficient separation of uranium from radioactive effluents

Porous aromatic frameworks with structural/pore controllability and rigid skeletons present a series of emerging materials for solid phase extraction. However, the complicated monomers or noble metal catalyst, and cumbersome synthetic strategies result in high-cost engineering application of porous aromatic frameworks. Herein, a simple synthetic strategy of porous aromatic frameworks with phosphonate is reported for efficient separation of uranium from radioactive effluents, and petroleum pitch, a low-cost and widely available material, was used as the building block. 4-Vinylbenzylphosphonic acid diethyl ester monomer is introduced to chelate uranium and to improve the aqueous dispersibility of sorbents. The phosphonate functionalized PPAFs take 40 min to achieve adsorption equilibrium, and the maximum sorption capacity reaches 147 mg U/g at pH 1.0. PPAFs exhibit good selectivity over various competing ions and excellent radioresistance in acidic solution. Besides, PPAFs remain almost 100% sorption efficiency and intact structure over 5 sorption-desorption cycles with alkaline eluent. This work not only applies a low-cost material for uranium extraction, but a new idea for the utilization of waste and recycling of resources.

Polythionine grafted onto magnetic SBA-15 for the removal of cadmium ions from aqueous solutions: isothermal and kinetic studies

Magnetic SBA-15 coated with polythionine was synthesized via the grafting method and used for the adsorption of Cd²⁺ ions from aqueous solutions.

Chemisorption of lanthanide ions on succinate-functionalized mesoporous silica: An in situ characterization by fluorescence

Chemisorption of Eu³⁺ and Tb³⁺ on SBA-15 functionalized with succinic groups has been studied by in situ steady-state fluorescence measurements. The enhancement of the emission sensitive bands indicates that both ions adsorb forming inner-sphere surface complexes. Adsorption is a fast process that attains equilibrium in about 5min. The variation of the peaks maxima (I₅₉₂ and I₆₁₆, for europium, and I₄₉₀ and I₅₄₅, for terbium) with the total ion concentration is accounted for by the sum of the contributions due to the adsorbed and free ions. The former contribution is langmuirian. At pH 4.5, the respective adsorption constants are 5×10⁵ and 3×10⁵M^-1, and the maximum adsorption capacities are 5.10×10^-4 and 5.23×10^-4molg^-1. The mismatch between the latter values and the number of attached carboxylic groups is discussed. Comparison with other functionalized mesoporous silicas indicates that the anchored succinic groups are very efficient for removing lanthanide ions from aqueous solutions.

Ion-Imprinted Mesoporous Silica for Selective Removal of Uranium from Highly Acidic and Radioactive Effluent

It is strategically important to recycle uranium from radioactive liquid wastes for future uranium supply of nuclear energy. However, it is still a challenge to adsorb uranium selectively from highly acidic and radioactive waste. In this paper, we report a novel strategy for effective uranium removal from highly acidic and radioactive media by surface ion-imprinted mesoporous silica sorbent. The sorbent was successfully synthesized by a co-condensation method with uranyl as the template ion and diethylphosphatoethyltriethoxysilane as the functional ligands. The pseudo-second-order model and Langmuir model showed better correlation with the sorption kinetic and isotherm data, and the sorption equilibrium could be reached within 40 min, the maximum adsorption capacity from Langmuir model was 80 mg/g in 1 mol/L nitric acid (HNO₃) solution at 298.15 K. The sorbent showed faster kinetics and higher selectivity toward uranium over other ions compared with nonimprinted mesoporous and other previous sorbents. Furthermore, the ion-imprinted materials exhibited remarkable radioresistance stability and could be regenerated efficiently after five cycles. This work may provide a new approach for highly efficient sorption of uranium from strong HNO₃ and radioactive media.

Phosphate-Functionalized Polyethylene with High Adsorption of Uranium(VI)

For uranium extraction from seawater, development of new stable and reusable sorbents with high affinity and good selectivity for U(VI) is required. Herein, a new phosphate-functionalized polyethylene (denoted PO₄/PE) was synthesized via a simple Ar-jet plasma treatment of PE in concentrated H₃PO₄ and was employed in U(VI) extraction from seawater. The prepared PO₄/PE shows superior performance in the extraction of trace U(VI) from seawater. The adsorption process followed the second-order kinetics model and the Langmuir model. The maximum adsorption capacity of PO₄/PE for U(VI) reaches 173.8 mg/g at pH 8.2 and 298 K. PO₄/PE can be effectively regenerated by 0.1 mol/L Na₂CO₃ and reused well even after eight cycles. Experimental results offer a new approach for U(VI) uptake from seawater.

Adsorption of Uranium over NH2-Functionalized Ordered Silica in Aqueous Solutions

The aim of this work was to obtain an in-depth understanding of the U(VI) adsorption mechanism over amino-functionalized mesoporous silica SBA-15 and highlights its high efficiency in aqueous media for U(VI) removal and preconcentration. The samples were synthesized and functionalized by both grafting and co-condensation methods, using different alkyl-substituted amine groups and were characterized using X-ray diffraction, N₂ physisorption, Fourier transform infrared spectroscopy, and elemental C-H-N-S analyses. The properties for U(VI) adsorption were evaluated under discontinuous conditions, with the determination of the effect of several parameters (initial pH, contact time, initial U(VI) concentration, functionalization method, and organic moiety composition). U(VI) adsorption over grafted materials reached equilibrium at around 30 min, with a maximum adsorption capacity of 573 mg_U·g_ads^-1 for the most efficient material at its optimal adsorption pH (equal to 6) at 20 °C. Functionalized materials by grafting exhibit better adsorption capacities than co-condensed samples because of higher function surface density and function availability. U(VI) adsorption mechanisms were also studied by measuring the electrophoretic mobilities of the particles, aqueous U(VI) speciation, in situ attenuated total reflection infrared and Raman spectroscopies, and transmission electron microscopy analysis. U(VI) adsorption occurred through the formation of an inner sphere complex. The localization of adsorbed U(VI) has also been determined inside of the mesopores, with the formation of several particles on the nanometer scale, in the size of U-hydroxy phases. Besides, the study of the reusability of amino-functionalized SBA-15 by applying adsorption-desorption cycles was also conducted. The adsorption capacity of the material remains stable for at least four adsorption-desorption cycles without any noticeable capacity decrease.

Organic layer formation and sorption of U(vi) on acetamide diethylphosphonate-functionalized mesoporous silica

Solid-state NMR is used to connect the molecular structure of acetamide phosphonate-functionalized mesoporous silica with its macroscopic U(vi) extraction properties.

Functionalized magnetic mesoporous silica nanoparticles for U removal from low and high pH groundwater

U(VI) species display limited adsorption onto sediment minerals and synthetic sorbents in pH <4 or pH >8 groundwater. In this work, magnetic mesoporous silica nanoparticles (MMSNs) with magnetite nanoparticle cores were functionalized with various organic molecules using post-synthetic methods. The functionalized MMSNs were characterized using N2 adsorption-desorption isotherms, thermogravimetric analysis (TGA), transmission electron microscopy (TEM), (13)C cross polarization and magic angle spinning (CPMAS) nuclear magnetic resonance (NMR) spectroscopy, and powder X-ray diffraction (XRD), which indicated that mesoporous silica (MCM-41) particles of 100-200nm formed around a core of magnetic iron oxide, and the functional groups were primarily grafted into the mesopores of ∼3.0nm in size. The functionalized MMSNs were effective for U removal from pH 3.5 and 9.6 artificial groundwater (AGW). Functionalized MMSNs removed U from the pH 3.5 AGW by as much as 6 orders of magnitude more than unfunctionalized nanoparticles or silica and had adsorption capacities as high as 38mg/g. They removed U from the pH 9.6 AGW as much as 4 orders of magnitude greater than silica and 2 orders of magnitude greater than the unfunctionalized nanoparticles with adsorption capacities as high as 133mg/g. These results provide an applied solution for treating U contamination that occurs at extreme pH environments and a scientific foundation for solving critical industrial issues related to environmental stewardship and nuclear power production.

Silica with immobilized phosphinic acid-derivative for uranium extraction

A novel adsorbent benzoimidazol-2-yl-phenylphosphinic acid/aminosilica adsorbent (BImPhP(O)(OH)/SiO2NH2) was prepared by carbonyldiimidazole-mediated coupling of aminosilica with 1-carboxymethylbenzoimidazol-2-yl-phenylphosphinic acid. It was obtained through direct phosphorylation of 1-cyanomethylbenzoimidazole by phenylphosphonic dichloride followed by basic hydrolysis of the nitrile. The obtained sorbent was well characterized by physicochemical methods, such as differential scanning calorimetry-mass spectrometry (DSC-MS), surface area and pore distribution analysis (ASAP), scanning electron microscopy (SEM), X-ray photoelectron (XPS) and Fourier transform infrared (FTIR) spectroscopies. The adsorption behavior of the sorbent and initial silica gel as well as aminosilica gel with respect to uranium(VI) from the aqueous media has been studied under varying operating conditions of pH, concentration of uranium(VI), contact time, and desorption in different media. The synthesized material was found to show an increase in adsorption activity with respect to uranyl ions in comparison with the initial compounds. In particular, the highest adsorption capacity for the obtained modified silica was found at the neutral pH, where one gram of the adsorbent can extract 176mg of uranium. Under the same conditions the aminosilica extracts 166mg/g, and the silica - 144mg/g of uranium. In the acidic medium, which is common for uranium nuclear wastes, the synthesized adsorbent extracts 27mg/g, the aminosilica - 16mg/g, and the silica - 14mg/g of uranium. It was found that 15% of uranium ions leached from the prepared material in acidic solutions, while 4% of uranium can be removed in a phosphate solution.

The removal of aqueous uranium by SBA-15 modified with phosphoramide: a combined experimental and DFT study

Phosphoramide-modified SBA-15 materials were prepared via a two-step process involving: (1) the synthesis of phosphoramide via amidation of phosphoryl chloride with a primary amine and (2) modification of the phosphoramide onto SBA-15.

Phosphonate-functionalized polystyrene microspheres with controlled zeta potential for efficient uranium sorption

A new method has been developed for effective uranium(vi) sorption from aqueous solution through phosphonate-functionalized polystyrene microspheres with controlled zeta potentials.

Probing the interaction of U(vi) with phosphonate-functionalized mesoporous silica using solid-state NMR spectroscopy

Solid-state NMR techniques combined with batch contact experiments elucidate how U(vi) binds to phosphonate-functionalized mesoporous silica.

New insights into the uranium adsorption behavior of mesoporous SBA-15 silicas decorated with alkylphosphine oxide ligands

Alkylphosphine oxide functionalized mesoporous silicas were prepared by co-condensation and further addition reaction with secondary n-propylphosphine oxide and are promising candidates for the preconcentration and adsorption of uranium from acidic aqueous solutions.

Functionalization of mesoporous materials for lanthanide and actinide extraction

Recent advances in the field of functionalized mesoporous solid-phase sorbents designed for rare earth element and actinide separation/concentration could provide answers to limitations occurring in the industrial separation processes of these critical elements.