Ratiometric temperature imaging using environment-insensitive luminescence of Mn-doped core-shell nanocrystals

Multimodal Temperature Readout Boosts the Performance of CuInS2/ZnS Quantum Dot Nanothermometers

Fluorescent nanothermometers are positioned to revolutionize research into cell functions and provide strategies for early diagnostics. Fluorescent nanostructures hold particular promise to fulfill this potential if nontoxic, stable varieties allowing for precise temperature measurement with high thermal sensitivities can be fabricated. In this work, we investigate the performance of micelle-encapsulated CuInS2/ZnS core/shell colloidal quantum dots (QDs) as fluorescent nanothermometers. We demonstrate four temperature readout modes, which are based on variations in the photoluminescence intensity, energy, and lifetime and on a specific ratio of excitation efficiencies. We further leverage this multimodal readout to construct a fifth, multiparametric thermometer calibration based on the multiple linear regression (MLR) model. We show that the MLR approach boosts the thermometer sensitivity by up to 7-fold while reducing the readout error by about a factor of 3. As a result, our QDs offer the highest sensitivities among semiconducting QDs emitting in the first biological window. The obtained results indicate that CuInS2/ZnS QDs are excellent candidates for intracellular in vivo thermometry and provide guidelines for further optimization of their performance.

Temperature-Dependent Photoluminescence of CdS/ZnS Core/Shell Quantum Dots for Temperature Sensors

Exploring the temperature-dependent photoluminescence (PL) properties of quantum dots (QDs) is not only important for understanding the carrier recombination processes in QD-based devices but also critical for expanding their special applications at different temperatures. However, there is still no clear understanding of the optical properties of CdS/ZnS core/shell QDs as a function of temperature. Herein, the temperature-dependent PL spectra of CdS/ZnS core/shell QDs were studied in the temperature range of 77-297 K. It was found that the band-edge emission (BEE) intensity decreases continuously with increasing temperature, while the surface-state emission (SSE) intensity first increases and then decreases. For BEE intensity, in the low temperature range, a small activation energy (29.5 meV) in the nonradiative recombination process led to the decrease of PL intensity of CdS/ZnS core/shell QDs; and at high temperature the PL intensity attenuation was caused by the thermal escape process. On the other hand, the temperature-dependent variation trend of the SSE intensity was determined by the competition of the trapping process of the surface trap states and the effect of thermally activated non-radiative defects. As the temperature increased, the PL spectra showed a certain degree of redshift in the peak energies of both band-edge and surface states and the PL spectrum full width at half-maximum (FWHM) increases, which was mainly due to the coupling of exciton and acoustic phonon. Furthermore, the CIE chromaticity coordinates turned from (0.190, 0.102) to (0.302, 0.194), which changed dramatically with temperature. The results indicated that the CdS/ZnS core/shell QDs are expected to be applied in temperature sensors.

Eye-Resolvable Surface-Plasmon-Enhanced Fluorescence Temperature Sensor

Temperature sensors are widely used in important fields such as daily home, medical care, and aerospace as a commonly used device for measuring temperature. Traditional temperature sensors such as thermocouples, thermal resistances, and infrared sensors are technically mature; however, they have limitations in the application environment, temperature measurement range, and temperature measurement accuracy. An eye-resolvable surface plasmon-enhanced fluorescence temperature sensor based on dual-emission Ag@SiO₂@CdS/ZnS composite nanoparticle film with multiple-parameter detectable signals and high response sensitivity was proposed in this work. The temperature sensor's x-chromaticity coordinate varied from 0.299 to 0.358 in the range of 77-297 K, while the y-chromaticity coordinate varied from 0.288 to 0.440, displaying eye-resolvable surface plasmon-enhanced fluorescence. The ratiometric response of two isolated photoluminescence (PL) peak-integrated areas located around 446 and 592 nm was found to be significantly temperature dependent, with a thermal sensitivity of 1.4% K^-1, which can be used as an additional parameter to measure the precise temperature. Furthermore, the surface state emission peak intensity was linearly related to temperature, with a correlation index Adj. R-Square of 99.8%. Multiple independent temperature estimates can help with self-calibration and improve the measurement accuracy. Our findings show that the designed sensors can detect low temperatures while maintaining stability and reproducibility.

Highly efficient ratiometric nanothermometers based on colloidal carbon quantum dots

Optical nanothermometers have attracted much attention due to their non-contact and precise measurement with high spatial resolution at the micro- and nanoscales. They can be applied in various fields such as micro-opto-electronics, photonics, and biomedical thermal and pH sensing, while most thermal sensors reported so far contain heavy metals or have low sensitivity. Herein, we demonstrate a highly sensitive ratiometric thermal sensor based on colloidal C-dots. C-dots exhibit dual emission originating from the band gap emission and surface-dominant emission, which show a different temperature-dependent photoluminescence (PL) response. Among different surface-functionalized C-dots, C-dots@OH exhibit an absolute thermal sensitivity of -0.082 °C-1, which is the highest among various types of ratiometric thermosensors, making it a very promising candidate for high-sensitivity, self-calibrated nanoscale thermometry. As a proof-of-concept, C-dots@OH were employed to monitor the intracellular temperature (32-42 °C), showing a clear trend for temperature variation in a single cell, indicating that C-dots could offer a powerful tool for a potential precise measurement of the intracellular temperature. They could also be used as thermal sensors for nano-electronic and optoelectronic devices.

A Review on van der Waals Boron Nitride Quantum Dots

Boron nitride quantum dots (BNQDs) have gained increasing attention for their versatile fluorescent, optoelectronic, chemical, and biochemical properties. During the past few years, significant progress has been demonstrated, started from theoretical modeling to actual application. Many interesting properties and applications have been reported, such as excitation-dependent emission (and, in some cases, non-excitation dependent), chemical functionalization, bioimaging, phototherapy, photocatalysis, chemical, and biological sensing. An overview of this early-stage research development of BNQDs is presented in this article. We have prepared un-bias assessments on various synthesis methods, property analysis, and applications of BNQDs here, and provided our perspective on the development of these emerging nanomaterials for years to come.

Tailoring the Heterostructure of Colloidal Quantum Dots for Ratiometric Optical Nanothermometry

Colloidal quantum dots (QDs) are a fascinating class of semiconducting nanocrystals, thanks to their optical properties tunable through size and composition, and simple synthesis methods. Recently, colloidal double-emission QDs have been successfully applied as competitive optical temperature sensors, since they exhibit structure-tunable double emission, temperature-dependent photoluminescence, high quantum yield, and excellent photostability. Until now, QDs have been used as nanothermometers for in vivo biological thermal imaging, and thermal mapping in complex environments at the sub-microscale to nanoscale range. In this Review, recent progress for QD-based nanothermometers is highlighted and perspectives for future work are described.

TADF-Emitting Zn(II)-Benzoporphyrin: An Indicator for Simultaneous Sensing of Oxygen and Temperature

A new luminescent indicator is presented that enables simultaneous measurement of oxygen and temperature at a single wavelength. The indicator, an alkylsulfone-substituted Zn(II)-meso-tetraphenyltetrabenzoporphyrin, emits prompt and thermally activated delayed fluorescence (TADF). TADF is sensitive toward oxygen and temperature and is referenced against prompt fluorescence (PF) that is not affected by oxygen. The information on both parameters is accessed from the decay time of TADF and the temperature-dependent ratio of TADF and PF. Sensor foils, made from poly(styrene-co-acrylonitrile) and the indicator dye, enable temperature-compensated trace oxygen sensing (0.002-6 hPa pO2) at ambient conditions. Compared to the previously reported dual sensors based on two emitters, the new sensor significantly simplifies the experimental setup and eliminates risks of different leaching or photobleaching rates by utilizing only one indicator dye and operating at a single wavelength.

Zn(II) Schiff Bases: Bright TADF Emitters for Self-referenced Decay Time-Based Optical Temperature Sensing

Thermally activated delayed fluorescence (TADF) is a highly temperature-dependent process and can be used in optical thermometry. TADF-based optical thermometers reported so far show fairly high-temperature sensitivity but have poor brightness and significant oxygen cross-talk. A new class of TADF emitters, Zn(II) Schiff base complexes, possess excellent brightness and high temperature sensitivity of the decay time at ambient temperature (4.1%/K change of TADF lifetime at 25 °C), enabling a resolution better than 0.03 °C. Oxygen cross-sensitivity is eliminated by covering the sensing layer (luminophore in polystyrene) with an off-stoichiometry thiol-ene polymer as an oxygen-consuming layer, and a poly(vinylidene chloride-co-acrylonitrile) layer as an oxygen barrier. The material is stable after more than 2 months of storage at ambient air, which enables long-term temperature monitoring.

Temperature dependent molecular fluorescence of [Agm]n+ quantum clusters stabilized by phosphate glass networks

Molecule like silver quantum clusters ([Agm]n+ QCs) exhibit an ultrasmall size confinement resulting in efficient broadband fluorescence. However, free [Agm]n+ QCs are also chemically active, so their stabilization is required for practical applications. We report in this work a phosphate oxyfluoride glass network enabled stabilization strategy of [Agm]n+ QCs. A series of silver-doped P2O5-ZnF2-xAg glasses were prepared by a conventional melt-and-quench method. The NMR and XPS results reveal that two types of [P(O,F)4] tetrahedrons (Q1, Q2) form chain structures and Zn(iv) connects [P(O,F)4] chains into a 3-dimension network in the glasses. The frameworks with limited void spaces were designed to restrict the polymerization degree, m, of [Agm]n+ QCs; the negatively charged tetrahedrons were designed to restrict the charge, n, of [Agm]n+ QCs. Through optical and mass spectroscopy studies, silver quantum clusters, [Ag2]2+ and [Ag4]2+, were identified to be charge compensated by [ZnO4] tetrahedrons and surrounded with [P(O,F)4] complex anions. The fluorescence thus gives high quantum efficiencies of 55.2% and 83.4%, for P2O5-ZnF2-xAg glass stabilized [Ag2]2+ and [Ag4]2+ QCs, respectively. This further reveals that the peak fixed fluorescence of [Ag2]2+ and [Ag4]2+ can be described by molecular fluorescence mechanisms. These are parity-allowed singlet-singlet transitions (S1 → S0), parity-forbidden triplet-singlet transitions (T1 → S0) and intersystem crossings between singlets (S1) and triplets (T1). The phonon coupled intersystem crossing between singlets (S1) and triplets (T1) determines the phosphate stabilized [Ag4]2+ QCs to exhibit a series of temperature dependent fluorescence behaviors. These include fluorescence intensity (at 50-200 K), intensity ratio (FIR) (at 50-200 K), peak shift (at 100-300 K) and lifetime (at 300-450 K) with maximum sensitivities of 1.27% K-1, 0.94% K-1, 0.29% K-1 and 0.41% K-1, respectively. Therefore, phosphate stabilized [Ag4]2+ QCs can be applied as temperature sensing probes, especially at low temperatures (10-300 K) and for color-based visualized temperature sensors.

Designing Dual Emissions via Co-doping or Physical Mixing of Individually Doped ZnO and Their Implications in Optical Thermometry

Here, we report on the novel design of dual emission via defect state engineering in codoped oxide microstructures and its implication in fluorescence intensity ratio (FIR) based optical temperature sensing. Eu- and Er-co-doped ZnO (EuEr:ZnO) microrods prepared by hydrothermal method. The emission peaks corresponding to Eu³⁺ and Er³⁺ are observed suggesting dual emission from codoped ZnO. Interestingly, Er³⁺ peak intensity decreases and that of Eu³⁺ increases with increase of temperature as is the case of individual doped cases and dual emission is also achieved via phyical mixing of the individual doped ZnO. The opposite trend is due to the electron transfer from the defect levels of host ZnO to Eu³⁺ and not to Er³⁺. Overall, our results pave the way in designing dual emission that can be exploited in FIR based temperature sensing. As an example, we probe temperature dependency of congo-red and polyvinyle alcohol (PVA) composite using EuEr:ZnO as optical probe for temperature sensing.

Ultrahigh-sensitive optical temperature sensing based on quasi-thermalized green emissions from Er:ZnO

Green emitting Er:ZnO microrods for ultra-high sensitive optical ratiometric temperature sensing, by following the fluorescence intensity ratio technique.

Ratiometric Nanothermometer Based on Rhodamine Dye-Incorporated F127-Melamine-Formaldehyde Polymer Nanoparticle: Preparation, Characterization, Wide-Range Temperature Sensing, and Precise Intracellular Thermometry

A series of fluorescent nanothermometers (FTs) was prepared with Rhodamine dye-incorporated Pluronic F-127-melamine-formaldehyde composite polymer nanoparticles (R-F127-MF NPs). The highly soluble Rhodamine dye molecules were bound with Pluronic F127 micelles and subsequently incorporated in the cross-linked MF resin NPs during high-temperature cross-link treatment. The morphology and chemical structure of R-F127-MF NPs were characterized with dynamic light scattering, electron microscopy, and Fourier-transform infrared (FTIR) spectra. Fluorescence properties and thermoresponsivities were analyzed using fluorescence spectra. R-F127-MF NPs are found to be monodispersed, presenting a size range of 88-105 nm, and have bright fluorescence and high stability in severe treatments such as autoclave sterilization and lyophilization. By simultaneously incorporating Rhodamine B and Rhodamine 110 (as reference) dyes at a doping ratio of 1:400 in the NPs, ratiometric FTs with a high sensibility of 7.6%·°C(-1) and a wide temperature sensing range from -20 to 110 °C were obtained. The FTs exhibit good stability in solutions with varied pH, ionic strengths, and viscosities and have similar working curves in both intracellular and extracellular environments. Cellular temperature variations in Hela cells during microwave exposure were successfully monitored using the FTs, indicating their considerable potential applications in the biomedical field.

Red-Tuned Mn d-d Emission in Doped Semiconductor Nanocrystals

Light-emitting Mn-doped semiconductor nanocrystals have been extensively studied for the last three decades for their intense and stable Mn d-d emission. In principle, this emission should be fixed at 585 nm (yellow), but recent studies have shown that the emission can be widely tuned even to 650 nm (red). This is a spectacular achievement as this would make Mn-doped nanocrystals efficient and tunable light emitters. Keeping these developments in view, the chemistry of the synthesis of these materials, their photophysical processes and the expected origins of their red emission are summarized in this Minireview. All the related important studies from 1992 onwards are chronologically discussed, and one particular case is elaborated on in detail. As these materials are potentially important for biology, and photovoltaic, sensing and light-emitting devices, this Minireview is expected to help researchers investigating the chemistry, physics and applications of these materials.

Tuning the optical, electronic and luminescence properties of LaOCl:Eu3+via structural and lattice strain modulation

Lattice strain increases with increasing of Eu³⁺ concentration, which influences on emission intensity of LaOCl:Eu³⁺ nanodisks.

Intracellular Temperature Sensing: An Ultra-bright Luminescent Nanothermometer with Non-sensitivity to pH and Ionic Strength

Luminescence thermometry usually suffer from cellular complexity of the biochemical environment (such as pH and ionic strength), and thus the accuracy and reliability of the determined intracellular temperature are directly affected. Herein, a photoluminescent nanothermometer composed of polymer encapsulated quantum dots (P-QD) has been developed. And the prepared nanothermometer exhibits some advantages: such as non-sensitivity to pH and ionic strength, as well as high detection sensitivity and ultrahigh reversibility. The intracellular temperature was accurately determined under physiological conditions with different pH and ionic strength, and direct measurement of thermogenesis in individual cells has been achieved.