Tunable properties induced by ion exchange in multilayer intertwined CuS microflowers with hierarchal structures

Flexible stretchable electrothermally/photothermally dual-driven heaters from nano-embedded hierarchical CuxS-Coated PET fabrics for all-weather wearable thermal management

The multifunctional photoelectronic devices are recently attracting much more attention due to their potential enlarged applications. The flexible stretchable electrothermally/photothermally dual-driven heaters for all-weather wearable thermal management are presented in this work with nano-embedded hierarchical Cu_xS-coated PET fabrics. Herein, the hierarchical nano-embedded Cu_xS film is fabricated via a simple chemical bath method for high electrical conductivity and highly efficient inelastic collision of electro/photo-generated carriers. The hierarchical nano-embedded Cu_xS morphology produces the low sheet resistance of 1.26 Ω sq^-1 and the super low total heat transfer coefficient of 3.256 × 10^-5 W/^oC·mm², which lead to the high-efficient electro/photo-dual-driven heating effect in the Cu_xS@PET fabrics. The saturated temperature on the as-fabricated flexible wearable heaters reaches up to 172 °C. The thermal conversion devices also bear the excellent stability, reproducibility, stretchability, controllability and corrosion-resistant characteristics. Interestingly, their excellent thermal conversion performance could be achieved by freely exchanging the driving power sources, such as electricity-supplying equipment, 635-nm laser, infrared physiotherapy lamp and solar simulator, which provides a necessary precondition for the all-weather applications of flexible wearable heaters. The as-fabricated electro/photo-dual-driven heaters on the Cu_xS@PET fabrics have the promising applications in wearable electronics, all-weather self-heating facilities, out/in-vivo physiotherapy, and so on.

Elucidating the Origin of Enhanced Photocatalytic Hydrogen Production on Tuned Cu7S4/CdS Heterostructures

Direct Z-scheme Cu 7 S 4 /CdS Janus photocatalysts are successfully prepared by cation exchange method. Extensive studies containing single-nanoparticle impact electrochemistry are performed and reveal that optimizing the Cu 7 S 4 /CdS ratio can decrease the accumulation of holes on valence band of CdS for inhibiting photocorrosion and promote the accumulation of electrons on the conduction band of Cu 7 S 4 for boosting the electron reducibility. With the optimized heterostructures, hydrogen evolution is remarkable promoted up to 21.62 mmol h -1 and quantum efficiency is up to 14.37 % using polylactic acid plastic waste as feedstock.

Dual-stimuli-responsive CuS-based micromotors for efficient photo-Fenton degradation of antibiotics

Antibiotics as emerging pollutants in water pose great risks to human health. Due to their persistence in the environment, advanced oxidation processes (AOPs) have been proposed for the degradation of antibiotics. Therefore, developing efficient catalysts for AOPs becomes critical for the removal of antibiotics. Herein, we develop self-propelled CuS-based micromotors (CuS@Fe₃O₄/Pt) as active heterogenous catalysts for efficient photo-Fenton degradation of antibiotics. Combining the merits of conventional heterogenous and homogenous catalysts, the prepared micromotors are easy to recycle and free of secondary pollution risks, while demonstrating high degradation efficiency due to self-induced intensification of mass transfer via autonomous motion and microbubble generation. The H₂O₂ in the Fenton reagents can serve as the fuel for the micromotors to drive their self-propulsion by bubbles generated from catalytic decomposition of H₂O₂ by the platinum layer. The dual-stimuli-responsiveness of the micromotors to magnetic field and light irradiation allows multi-modes of propulsion and guidance in different systems. The efficient photothermal effect of CuS enables the micromotors to achieve collective phototactic motion toward light, whereas magnetic responsiveness facilitates the recovery and collection of the micromotors. The synergistic effect of CuS and Fe₃O₄ NPs in H₂O₂ under visible light irradiation generates a large amount of OH· and ·O₂^- to effectively degrade tetracycline within several minutes. With these advantages, the dual-stimuli-responsive CuS-based micromotors provide a new strategy for enhanced degradation of antibiotics in water purification applications.

SiO2@Cu7S4 nanotubes for photo/chemodynamic and photo-thermal dual-mode synergistic therapy under 808 nm laser irradiation

Photodynamic therapy (PDT) is a light-based modality for tumor treatment that involves the generation of reactive oxygen species (ROS) by the combination of light, a photosensitizer, and molecular oxygen. Nevertheless, the therapeutic effects of PDT are limited by hypoxic conditions that worsen with oxygen consumption during the PDT process. Photo/chemodynamic therapy (PCDT) based on the Fenton reaction is one strategy to improve ROS generation, provided a highly effective Fenton reagent is developed. In this research, SiO₂@Cu₇S₄ nanotubes (NTs) were synthesized as a PCDT agent. This double-valence metal-sulfide composite material can react with H₂O₂ at the tumor site. SiO₂@Cu₇S₄ NTs can produce more ROS than the traditional PDT agents, and besides, they can also be used as a photothermal therapy (PTT) agent. SiO₂@Cu₇S₄ NTs will trigger the PTT effect under 808 nm irradiation and generate a large amount of heat to eradicate cancer cells. This heat will also promote the PCDT effect by increasing the reaction rate. Thus, the SiO₂@Cu₇S₄ NT is a suitable material for PCDT and PTT synergistic oncotherapy. The 808 nm laser is selected as the appropriate excitation source, providing adequate penetration and minimal harm to normal cells. The experimental data presented herein demonstrate the promising photosensitive, Fenton-like, and photothermal performance of SiO₂@Cu₇S₄ NTs. Furthermore, the findings could promote the development of PCDT and PTT synergistic therapy. Thus, this research provides a feasible method to design a single, multifunctional material for cancer treatment.

Green synthesis of CuO nanoparticles using Lantana camara flower extract and their potential catalytic activity towards the aza-Michael reaction

Aza-Michael addition is one of the most exploited reactions in organic chemistry. It is regarded as one of the most popular and efficient methods for the creation of the carbon–nitrogen bond, which is a key feature of many bioactive molecules. Herein, we report the synthesis of CuO nanoparticles by an alkaline hydrolysis process in the presence of the flower extract of Lantana camara, an invasive weed, followed by calcination in air at 400 °C. Microscopic results indicated that the plant extract played an important role in the modulation of the size and shape of the product. In the presence of extract, porous CuO nanostructures are formed. While mostly aggregated rod-shaped CuO nanostructures are formed in the absence of extract. The products are pure and highly crystalline possessing the monoclinic phase. The CuO nanoparticles have been used as a catalyst in the aza-Michael addition reaction in aqueous medium under ultrasound vibration. The product yield is excellent and the catalyst is reusable up to the fifth cycle. The catalyst system can be extended to various substituted substrates with excellent to moderate yields.

An easy and convenient synthesis process is reported for the synthesis of CuO nanoparticles using plant extract for use as a catalyst in the aza-Michael addition reaction.

Room-temperature conversion of Cu2−xSe to CuAgSe nanoparticles to enhance the photocatalytic performance of their composites with TiO2

Surfactant-free CuAgSe–TiO₂ composites show an improved photocatalysis as compared to Cu_2−xSe–TiO₂ composites or TiO₂ alone.

RN, Rajamathi JT, Rajamathi M. Microwave-Assisted Synthesis of Porous Aggregates of CuS Nanoparticles for Sunlight Photocatalysis

Solvated two-dimensional nanosheets of copper hydroxy dodecylsulfate in 1-butanol react with thiourea under microwave irradiation to yield surfactant-free porous aggregates of CuS nanoparticles. These aggregates exhibit excellent photocatalytic activity toward degradation of methylene blue, methyl orange, and 4-chlorophenol in natural sunlight. While the high surface area (14.74 m² g^-1) and porosity increase the active reaction centers for adsorption and degradation of organic molecules, quantum confinement results in a low recombination of photogenerated electrons and holes. Chemical and photogenerated hydroxyl radicals cause the oxidation of the dyes and 4-chlorophenol.

Growth behavior of Au/Cu2−xS hybrids and their plasmon-enhanced dual-functional catalytic activity

The growth behavior of Au/Cu_2−xS hybrids was investigated, and the obtained half-shell Au(nanospheres)/Cu_2−xS exhibited dual-plasmon enhanced bifunctional catalytic activity.

Hierarchical Cu2S nanorods with different crystal phases for asymmetrical supercapacitors and visible-light photocatalysis

Nanomaterials with hierarchical structures have attracted much attention recently due to their impressive behavior in many fields. Herein, hierarchical Cu2S nanorods with monoclinic and hexagonal phases are first in situ grown on copper sheets by simple hydrothermal methods. The solvent largely influences the feature of Cu2S nanorods during the growth process and the proposed mechanism is elaborately elucidated for these different Cu2S nanorods. Owing to their wheat-like architecture and higher electrical conductivity, the hexagonal Cu2S nanorods exhibit superior electrochemical performance with a specific capacitance of 346 mF cm-2 at 5 mA cm-2 and more than 90% capacitance after 2000 cycles. The solid-state asymmetrical supercapacitors based on the hexagonal Cu2S electrodes have a specific capacitance of 172 mF cm-2 at 5 mA cm-2 and excellent electrochemical stability with ∼90% capacitance after 2000 cycling tests. Moreover, the hierarchical Cu2S nanorods show great photocatalytic ability in the degradation of methylene blue (MB) and rhodamine B (RhB) dyes with the assistance of H2O2 under visible light. This work provides a way to fabricate copper sulfides with hierarchical structures and multi-functions.

In situ sulfuration synthesis of flexible PAN-CuS “flowering branch” heterostructures as recyclable catalysts for dye degradation

“Flowering branch”-like PAN-CuS hierarchical heterostructures were in situ synthesized through a facile hydrothermal sulfuration growth process on PAN-based fibers prepared by electrospinning. The PAN fibers can serve as a stable flexible support, while CuS flowers assembled from nanosheets can act as reactive materials, showing high performance in the degradation of dyes. Moreover, these heterostructures can be recovered easily without a decrease in their photocatalytic activity, thus showing favorable recycling capability.

“Flowering branch”-like PAN-CuS hierarchical heterostructures were in situ synthesized through a facile hydrothermal sulfuration growth process on PAN-based fibers prepared by electrospinning.

Diversified copper sulfide (Cu2-xS) micro-/nanostructures: a comprehensive review on synthesis, modifications and applications

As a significant metal chalcogenide, copper sulfide (Cu_2-xS, 0 < x < 1), with a unique semiconducting and nontoxic nature, has received significant attention over the past few decades. Extensive investigations have been employed to the various Cu_2-xS micro-/nanostructures owing to their excellent optoelectronic behavior, potential thermoelectric properties, and promising biomedical applications. As a result, micro-/nanostructured Cu_2-xS with well-controlled morphologies, sizes, crystalline phases, and compositions have been rationally synthesized and applied in the fields of photocatalysis, energy conversion, in vitro biosensing, and in vivo imaging and therapy. However, a comprehensive review on diversified Cu_2-xS micro-/nanostructures is still lacking; therefore, there is an imperative need to thoroughly highlight the new advances made in function-directed Cu_2-xS-based nanocomposites. In this review, we have summarized the important progress made in the diversified Cu_2-xS micro-/nanostructures, including that in the synthetic strategies for the preparation of 0D, 1D, 2D, and 3D micro-/nanostructures (including polyhedral, hierarchical, hollow architectures, and superlattices) and in the development of modified Cu_2-xS-based composites for enhanced performance, as well as their various applications. Furthermore, the present issues and promising research directions are briefly discussed.

Hierarchical Design of CuS Architectures for Visible Light Photocatalysis of 4-Chlorophenol

Hydrothermal-assisted CuS hierarchical architectures were grown in the presence of anionic sulfur sources, and the investigation of their degradation efficiency for a pesticide 4-chlorophenol (4-CP) under visible light irradiation was carried out. The dissociation of S^2- from the sulfur compound governs the nucleation of CuS followed by a specific pattern of growth to produce different morphologies. The self-assembled covellite spherical CuS flower architecture assembles in the presence of thiourea and exhibits the highest photodegradation activity. The open architecture of ∼2.3 μm spherical CuS flowers consisting of a ∼100 nm thick sheet encompasses a comparatively high surface area and particle growth along the (110) plane that facilitates more active sites for catalytic activity enhancement. The catalyst loading for 4-CP degradation has been optimized, and a detailed trapping mechanism has been explored.

Consecutive Reaction to Construct Hierarchical Nanocrystalline CuS "Branch" with Tunable Catalysis Properties

New CuS nanocrystals with a 3D hierarchical branched structure are successfully synthesized through in situ consecutive reaction method with copper foam as template. The formation mechanism of the 3D hierarchical branched structure obtained from the secondary reaction is investigated by adjusting the reaction time. The morphology of CuS nanosheet arrays with the 3D hierarchical branched structure is changed through Cu(2+) exchange. In this method, the copper foam reacted completely, and the as-synthesized CuS@Cu9S5 nanocrystals are firmly grown on the surface of the 3D framework. This tunable morphology significantly influence the physical and chemical properties, particularly catalytic performance, of the materials. The as-obtained material of Cu@CuS-2 with the 3D hierarchical branched structure as catalyst for methylene blue degradation exhibits good catalytic performance than that of the material of Cu@CuS with 2D nanosheets in dark environment. Furthermore, the cation exchange between Cu and Cu(2+) indicates that Cu(2+) in wastewater could be absorbed by Cu@CuS-2 with the 3D hierarchical branched structure. The exchanged resultant of CuS@Cu9S5 retains its capability to degrade organic dyes. This in situ consecutive reaction method may have a significant impact on controlling the crystal growth direction of inorganic material.

Green self-assembly of zein-conjugated ZnO/Cd(OH)Cl hierarchical nanocomposites with high cytotoxicity and immune organs targeting

Inorganic nanomedicines in the fight against cancer have progressed rapidly during recent years, with the synergistic advantages of multifunctional nanosystems compared to single component. Herein, a drug-combination opinion was introduced into “nanomedicine” based on the understanding of Trojan horse-anti-tumor mechanism of inorganic nano-medicines. Moreover, we reported the green and facile synthesis route of mono-dispersed and rod-like zein-conjugated ZnO/Cd(OH)Cl hierarchical nanocomposites. We found that the nanocomposites exhibited high-efficiency killing ability to tumor cells through lipid peroxidation mediated-membrane disintegration route. The safety studies in BALB/c mice didn’t detect injection anaphylaxis, hemolysis and cytotoxicity. More interestingly, the nano-composites could specially accumulate in liver and kidney, which will be helpful for targeting cure to these regional cancers.

Nanoporous CuS with excellent photocatalytic property

We present the rational synthesis of nanoporous CuS for the first time by chemical dealloying method. The morphologies of the CuS catalysts are controlled by the composition of the original amorphous alloys. Nanoporous Cu₂S is firstly formed during the chemical dealloying process, and then the Cu₂S transforms into CuS. The nanoporous CuS exhibits excellent photocatalytic activity for the degradation of the methylene blue (MB), methyl orange (MO) and rhodamine B (RhB). The excellent photocatalytic activity of the nanoporous CuS is mainly attributed to the large specific surface area, high adsorbing capacity of dyes and low recombination of the photo generated electrons and holes. In the photo degradation process, both chemical and photo generated hydroxyl radicals are generated. The hydroxyl radicals are favor in the oxidation of the dye molecules. The present modified dealloying method may be extended for the preparation of other porous metal sulfide nanostructures.

Solvothermal Synthesis of Three-Dimensional Hierarchical CuS Microspheres from a Cu-Based Ionic Liquid Precursor for High-Performance Asymmetric Supercapacitors

It is meaningful to exploit copper sulfide materials with desired structure as well as potential application due to their cheapness and low toxicity. A low-temperature and facile solvothermal method for preparing three-dimensional (3D) hierarchical covellite (CuS) microspheres from an ionic liquid precursor [Bmim]2Cu2Cl6 (Bmim = 1-butyl-3-methylimidazolium) is reported. The formation of CuS nanostructures was achieved by decomposition of intermediate complex Cu(Tu)3Cl (thiourea = Tu), which produced CuS microspheres with diameters of 2.5-4 μm assembled by nanosheets with thicknesses of 10-15 nm. The ionic liquid, as an "all-in-one" medium, played a key role for the fabrication and self-assembly of CuS nanosheets. The alkylimidazolium rings ([Bmim](+)) were found to adsorb onto the (001) facets of CuS crystals, which inhibited the crystal growth along the [001] direction, while the alkyl chain had influence on the assembly of CuS nanosheets. The CuS microspheres showed enhanced electrochemical performance and high stability for the application in supercapacitors due to intriguing structural design and large specific surface area. When this well-defined CuS electrode was assembled into an asymmetric supercapacitor (ASC) with an activated carbon (AC) electrode, the CuS//AC-ASC demonstrated good cycle performance (∼88% capacitance after 4000 cycles) and high energy density (15.06 W h kg(-1) at a power density of 392.9 W kg(-1)). This work provides new insights into the use of copper sulfide electrode materials for asymmetric supercapacitors and other electrochemical devices.

Double metal ions synergistic effect in hierarchical multiple sulfide microflowers for enhanced supercapacitor performance

In this paper, the design, synthesis, and measurement of a new and hierarchically structured series of NixCo1-xS1.097 electroactive materials are reported. The materials were synthesized through an ion-exchange process using hierarchically structured CoS1.097 as precursors, and a strategy utilizing the synergistic effect of double metal ions was developed. Two complementary metal ions were used to enhance the performance of electrode materials. The specific capacitance of the electroactive materials was continuously improved by increasing the nickel ion content, and the electric conductivity was also enhanced when the cobalt ion was varied. Experimental results showed that the nickel ion content in NixCo1-xS1.097 could be adjusted from x = 0 to 0.48. Specifically, when x = 0.48, the composite exhibited a remarkable maximum specific capacitance approximately 5 times higher than that of the CoS1.097 precursors at a current density of 0.5 A g(-1). Furthermore, the specific capacitance of Ni0.48Co0.52S1.097 electrodes that were modified with reduced graphene oxide could reach to 1152 and 971 F g(-1) at current densities of 0.5 and 20 A g(-1) and showed remarkably higher electrochemical performance than the unmodified electrodes because of their enhanced electrical conductivity. Thus, the strategy utilizing the synergistic effect of double metal ions is an alternative technique to fabricate high-performance electrode materials for supercapacitors and lithium ion batteries.

Nanostructured copper sulfides: synthesis, properties and applications

Copper sulfides are the most extensively studied materials due to their non-toxicity, semiconducting nature and tunable properties. In view of this, present review article discusses various synthetic strategies for the fabrication of nanostructured copper sulfides of different morphologies and properties comprehensively followed by their applications in various fields.

A controlled solvothermal synthesis of CuS hierarchical structures and their natural-light-induced photocatalytic properties

A solvothermal synthesis of CuS hierarchical structures for the photodegradation of methylene blue (MB).

Fabrication of copper sulfide using a Cu-based metal organic framework for the colorimetric determination and the efficient removal of Hg2+ in aqueous solutions

From a Cu-based metal organic framework to copper sulfide by wet-treatment: towards the colorimetric determination and the efficient removal of Hg²⁺.

Controlled synthesis of CuS caved superstructures and their application to the catalysis of organic dye degradation in the absence of light

CuS caved superstructures with a variety of sizes and regular shapes were synthesized by an innovative one-pot method, which showed excellent catalytic properties evaluated by degradation of methylene blue (MB) without light.

Alanine based coordinating ligand mediated hydrothermal synthesis of CuS nano/microstructures and morphology dependent photocatalysis

Coordinating ligand controlled CuS nano/microstructures and morphology dependent photocatalysis.

Nanostructured metal sulfides for energy storage

Advanced electrodes with a high energy density at high power are urgently needed for high-performance energy storage devices, including lithium-ion batteries (LIBs) and supercapacitors (SCs), to fulfil the requirements of future electrochemical power sources for applications such as in hybrid electric/plug-in-hybrid (HEV/PHEV) vehicles. Metal sulfides with unique physical and chemical properties, as well as high specific capacity/capacitance, which are typically multiple times higher than that of the carbon/graphite-based materials, are currently studied as promising electrode materials. However, the implementation of these sulfide electrodes in practical applications is hindered by their inferior rate performance and cycling stability. Nanostructures offering the advantages of high surface-to-volume ratios, favourable transport properties, and high freedom for the volume change upon ion insertion/extraction and other reactions, present an opportunity to build next-generation LIBs and SCs. Thus, the development of novel concepts in material research to achieve new nanostructures paves the way for improved electrochemical performance. Herein, we summarize recent advances in nanostructured metal sulfides, such as iron sulfides, copper sulfides, cobalt sulfides, nickel sulfides, manganese sulfides, molybdenum sulfides, tin sulfides, with zero-, one-, two-, and three-dimensional morphologies for LIB and SC applications. In addition, the recently emerged concept of incorporating conductive matrices, especially graphene, with metal sulfide nanomaterials will also be highlighted. Finally, some remarks are made on the challenges and perspectives for the future development of metal sulfide-based LIB and SC devices.

Controlled synthesis and catalytic activity of copper sulfide nanostructured assemblies with different morphologies

A simple, template-free and mild solution chemistry route was employed to synthesize diverse copper sulfide (CuS) nanostructured assemblies at 70 °C by varying the solvent (water or ethylene glycol, or their ratios (3:1, 1:1 and 1:3)). The CuS structures in the shape of spheres and nanotubes were found to be assemblies of either nanoplates or nanoparticles. The nanotube formation was elaborately studied by varying the synthesis parameters such as temperature, reaction duration, precursor's ratio, and counterions. Counterions such as NO3(-) and SO4(2-) were found to be suitable for nanotube formation whereas in the presence of Cl(-) and OAc(-) ions, CuS flake-like and nanoparticle assemblies are obtained, respectively. The optical bandgaps for the CuS with different morphologies were measured to be in the range of 1.88-2.16 eV. The bandgap of CuS in the visible region of electromagnetic radiation prompted it to be used as photocatalyst in the past under natural light. However, we demonstrate here the similar catalytic performance of as-synthesized CuS nanostructures for the degradation of methylene blue in the dark, suggesting that light does not play a role in its catalytic behavior.

Ag+ insertion into 3D hierarchical rose-like Cu(1.8)Se nanocrystals with tunable band gap and morphology genetic

In this study, novel hierarchical rose-like Cu1.8Se microspheres with a porous three-dimensional (3D) framework were successfully synthesized by using a one-pot in situ growth method at low temperature (60 °C). The Cu1.8Se microspheres covered the surface of the 3D porous framework. The formation mechanism was investigated in detail by adjusting the volume ratio of DMF and EDA, as the blend solvents, and the reaction time. Then, the chemical composition of the Cu1.8Se microspheres was altered by Ag(+) exchange without changing their morphology and structure. In this way, the binary Cu1.8Se was efficiently converted into the ternary CuAgSe. Notably, the band gap of materials was tuned continuously from 3.83 eV to 3.03 eV, and CuAgSe was produced continuously by adjusting the replacement time. This work provides a novel concept and a simple method that can serve as a good reference for improving the performance of tunable materials and the preparation of multielement alloy materials.

Template-free and green sonochemical synthesis of hierarchically structured CuS hollow microspheres displaying excellent Fenton-like catalytic activities

Hollow CuS architectures have been fabricated via a template-free and green sonochemical process displaying superior Fenton-like catalytic activities.

Beneficial metal ion insertion into dandelion-like MnS with enhanced catalytic performance and genetic morphology

Large-scale novel hierarchical dandelion-like MnS was successfully synthesized with manganese complex as a template under mild reaction conditions.