The optical and magnetic properties of CoO and Co nanocrystals prepared by a facile technique

Oleic acid/oleylamine ligand pair: a versatile combination in the synthesis of colloidal nanoparticles

A variety of colloidal chemical approaches has been developed in the last few decades for the controlled synthesis of nanostructured materials in either water or organic solvents. Besides the precursors, the solvents, reducing agents, and the choice of surfactants are crucial for tuning the composition, morphology and other properties of the resulting nanoparticles. The ligands employed include thiols, amines, carboxylic acids, phosphines and phosphine oxides. Generally, adding a single ligand to the reaction mixture is not always adequate to yield the desired features. In this review, we discuss in detail the role of the oleic acid/oleylamine ligand pair in the chemical synthesis of nanoparticles. The combined use of these ligands belonging to two different categories of molecules aims to control the size and shape of nanoparticles and prevent their aggregation, not only during their synthesis but also after their dispersion in a carrier solvent. We show how the different binding strengths of these two molecules and their distinct binding modes on specific facets affect the reaction kinetics toward the production of nanostructures with tailored characteristics. Additional functions, such as the reducing function, are also noted, especially for oleylamine. Sometimes, the carboxylic acid will react with the alkylamine to form an acid-base complex, which may serve as a binary capping agent and reductant; however, its reducing capacity may range from lower to much lower than that of oleylamine. The types of nanoparticles synthesized in the simultaneous presence of oleic acid and oleylamine and discussed herein include metal oxides, metal chalcogenides, metals, bimetallic structures, perovskites, upconversion particles and rare earth-based materials. Diverse morphologies, ranging from spherical nanoparticles to anisotropic, core-shell and hetero-structured configurations are presented. Finally, the relation between tuning the resulting surface and volume nanoparticle properties and the relevant applications is highlighted.

The Use of Synthesized CoO/Co3O4 Nanoparticles as A Corrosion Inhibitor of Low-Carbon Steel in 1 M HCl

CoO/Co₃O₄ nanoparticles (CoO/Co₃O₄ NPs) were synthesized with egg white. The effectiveness of CoO/Co₃O₄ NPs to inhibit the corrosion of carbon steel has verified in acidic medium (1 M HCl). It has been found that Langmuir adsorption isotherm is the dominant adsorption process of CoO/Co₃O₄ NPs on the surface of low-carbon steel. The thermodynamic parameters also demonstrated that the adsorption process of CoO/Co₃O₄ NPs was a physicochemical, spontaneous, and exothermic process. The electrochemical impedance spectroscopy technique and potentiodynamic polarization were applied. The results obtained in this study showed that CoO/Co₃O₄ NPs acted as a mixed inhibitor for the anodic reaction and the cathodic reaction, and the efficiency to inhibit the corrosion was 93% at 80 ppm of the inhibitor. The results of scanning electron microscopy (SEM) technique, energy-dispersive X-ray spectroscopy (EDS), and X-ray electron spectroscopy (XPS) confirmed the effectiveness that was obtained using the inhibitor to protect the surface of low carbon steel. Thus, low-carbon steel can be protected against corrosion in acidic medium using CoO/Co₃O₄ NPs as inhibitors.

Crystalline and magnetic properties of CoO nanoparticles locally investigated by using radioactive indium tracer

We herein report a comprehensive investigation on the magnetic, structural, and electric properties of CoO nanoparticles with different sizes by local inspection through hyperfine interactions measured in a wide range of temperatures (10–670 K) by using radioactive \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$^{111}$$\end{document}111In(\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$^{111}$$\end{document}111Cd) tracers with the perturbed angular correlations technique. Small cobalt oxide nanoparticles with the characteristic size of 6.5 nm have been prepared by the wet chemical route that turned out to be essential to incorporate radioactivity tracers during nucleation and growth of the particles. Nanocrystalline samples with 22.1 nm size were obtained by thermal treatments under low pressure of helium at 670 K. The hyperfine data were correlated with X-ray diffraction, ZFC–FC magnetic measurements, and transmission electron microscopy to describe the structure, magnetic properties, size, and shape of samples. An analysis of the temperature evolution of hyperfine parameters revealed that the structural distortion and the magnetic disorder in the core and on the surface layer play an important role in the magnetic behavior of CoO nanoparticles.

Conversion of Co Nanoparticles to CoS in Metal-Organic Framework-Derived Porous Carbon during Cycling Facilitates Na2S Reactivity in a Na-S Battery

Room-temperature sodium-sulfur batteries have attracted wide interest due to their high energy density and high natural abundance. Polysulfide dissolution and irreversible Na₂S conversion are challenges to achieving high battery performance. Herein, we utilize a metal-organic framework-derived Co-containing nitrogen-doped porous carbon (CoNC) as a catalytic sulfur cathode host. A concentrated sodium electrolyte based on sodium bis(fluorosulfonyl)imide, dimethoxyethane, and bis(2,2,2-trifluoroethyl) ether is used to mitigate polysulfide dissolution. We tune the amount of Co present in the CoNC carbon host by acid washing. Significant improvement in reversible sulfur conversion and capacity retention is observed with a higher Co content in CoNC, with 600 mAh g^-1 and 77% capacity retention for CoNC and 261 mAh g^-1 and 56% capacity retention for acid-washed CoNC at cycle 50 at 80 mAh g^-1. Post-mortem X-ray photoelectron spectroscopy, transmission electron microscopy, and selected area electron diffraction suggest that CoS is formed during cycling in place of Co nanoparticles and CoN₄ sites. Raman spectroscopy suggests that CoS exhibits a catalytic effect on the oxidation of Na₂S. Our findings provide insights into understanding the role Co-based catalysts play in sulfur batteries.

Dendritic defect-rich palladium-copper-cobalt nanoalloys as robust multifunctional non-platinum electrocatalysts for fuel cells

Recently, the development of high-performance non-platinum electrocatalysts for fuel cell applications has been gaining attention. Palladium-based nanoalloys are considered as promising candidates to substitute platinum catalysts for cathodic and anodic reactions in fuel cells. Here, we develop a facile route to synthesize dendritic palladium–copper–cobalt trimetallic nanoalloys as robust multifunctional electrocatalysts for oxygen reduction and formic acid oxidation. To the best of our knowledge, the mass activities of the dendritic Pd₅₉Cu₃₀Co₁₁ nanoalloy toward oxygen reduction and formic acid oxidation are higher than those previously reported for non-platinum metal nanocatalysts. The Pd₅₉Cu₃₀Co₁₁ nanoalloys also exhibit superior durability for oxygen reduction and formic acid oxidation as well as good antimethanol/ethanol interference ability compared to a commercial platinum/carbon catalyst. The high performance of the dendritic Pd₅₉Cu₃₀Co₁₁ nanoalloys is attributed to a combination of effects, including defects, a synergistic effect, change of d-band center of palladium, and surface strain.

Fuel cells are promising for sustainable energy generation, but are limited by the performance of electrocatalysts. Here the authors synthesize dendritic palladium–copper–cobalt nanoalloys with electrocatalytic activity for oxygen reduction and formic acid oxidation as well as alcohol tolerance.

Phase-controlled synthesis and magnetic properties of cubic and hexagonal CoO nanocrystals

We report facile solution approaches for the phase-controlled synthesis of rock-salt cubic CoO (c-CoO) and wurtzite-type hexagonal CoO (h-CoO) nanocrystals. In the syntheses, the cobalt precursor cobalt (II) stearate is decomposed in 1-octadecene at 320 °C, and the crystalline phase of synthesized products depend critically on the amounts of H₂O. While the presence of small amounts of H₂O promotes the generation of c-CoO, h-CoO is obtained in the absence of H₂O. The as-prepared c-CoO nanocrystals exhibit a multi-branched morphology with several short rods growing on the 〈100〉 direction interlaced together whereas the h-CoO nanocrystals show a multi-rod structure with several rods growing on the same base facet along the c-axis. The formation mechanisms are discussed on the basis of FTIR spectrometry data and color changes of the reaction mixture. Finally the magnetic properties of as-prepared CoO nanocrystals are measured and the results show that c-CoO nanocrystals are intrinsically antiferromagnetic with a Néel temperature of about 300 K but the antiferromagnetic ordering is not distinct for the h-CoO nanocrystals. Weak ferromagnetic contributions are also observed for both c-CoO and h-CoO nanocrystals with obvious magnetic hysteresis at 5 and 300 K. The uncompensated spins that can be induced by crystalline defects such as cation-vacancy may account for the observed weak ferromagnetism.

Dramatically enhancing the yield of carbon nanotubes by simply adding oxygen-containing molecules in solid-state synthesis

Commercially available oxygen-containing molecules are utilized to enhance the yield of carbon nanotubes in the solid-state pyrolysis of organometallic precursors.

Ethylenediamine-mediated synthesis of Mn₃O₄ nano-octahedrons and their performance as electrocatalysts for the oxygen evolution reaction

Mn₃O₄ octahedrons with well-defined facets exhibit enhanced catalytic activity and sensing characteristics, and have attracted considerable attention in recent years. However, current fabrication methods for Mn₃O₄ octahedrons generally produce particles of micron and sub-micron sizes, and impurities such as MnO₂ and Mn₂O₃ are often found. We present the synthesis of Mn₃O₄ nano-octahedrons with a pure Mn₃O₄ phase and size down to 50 nm based on a hydrothermal method using Mn(NO₃)₂ as the manganese source and ethylenediamine (EDA) as the structure-mediating agent. It is found that EDA plays a crucial role in the formation of Mn₃O₄ nano-octahedrons in regulating both the morphology and the crystal structure of the products. The growth process is proposed to follow a "dissolution-recrystallization" and "capping-molecule assisted growth" mechanism. As electrocatalysts towards the oxygen evolution reaction, the 50 nm Mn₃O₄ nano-octahedrons demonstrate a considerably enhanced activity compared to 160 nm Mn₃O₄ octahedrons.