Energy transfer processes in dye-doped nanostructures yield cooperative and versatile fluorescent probes

Control of the fluorescence lifetime in dye based nanoparticles

Fluorescent dye based nanoparticles (NPs) have received increased interest due to their high brightness and stability. In fluorescence microscopy and assays, high signal to background ratios and multiple channels of detection are highly coveted. To this end, time-resolved imaging offers suppression of background and temporal separation of spectrally overlapping signals. Although dye based NPs and time-resolved imaging are widely used individually, the combination of the two is uncommon. This is likely due to that dye based NPs in general display shortened and non-mono-exponential lifetimes. The lower quality of the lifetime signal from dyes in NPs is caused by aggregation caused quenching (ACQ) and energy migration to dark states in NPs. Here, we report a solution to this problem by the use of the small-molecule ionic isolation lattices (SMILES) concept to prevent ACQ. Additionally, incorporation of FRET pairs of dyes locks the exciton on the FRET acceptor providing control of the fluorescence lifetime. We demonstrate how SMILES NPs with a few percent rhodamine and diazaoxatriangulenium FRET acceptors imbedded with a cyanine donor dye give identical emission spectra and high quantum yields but very different fluorescence lifetimes of 3 ns and 26 ns, respectively. The two spectrally identical NPs are easily distinguished at the single particle level in fluorescence lifetime imaging. The doping approach for dye based NPs provides predictable fluorescence lifetimes and allows for these bright imaging reagents to be used in time-resolved imaging detection modalities.

VEGFR-2 adhesive nanoprobes reveal early diabetic retinopathy in vivo

Diabetic retinopathy (DR) is a debilitating organ manifestation of diabetes. Absent of early diagnosis and intervention, vision tends to drastically and irreversibly decline. Previously, we showed higher vascular endothelial growth factor receptor 2 (VEGFR-2) expression in diabetic microvessels, and the suitability of this molecule as a biomarker for early DR diagnosis. However, a hurdle to translation remained generation of biodegradable nanoprobes that are sufficiently bright for in vivo detection. Here, an adhesive fluorescent nanoprobe with high brightness was developed using biodegradable materials. To achieve that, a fluorophore with bulky hydrophobic groups was encapsulated in the nanoparticles to minimize fluorophore π-π stacking, which diminishes brightness at higher loading contents. The nanoprobe selectively targeted the VEGFR-2 under dynamic flow conditions. Upon systemic injection, the nanoprobes adhered in the retinal microvessels of diabetic mice and were visualized as bright spots in live retinal microscopy. Histology validated the in vivo results and showed binding of the nanoprobes to the microvascular endothelium and firmly adhering leukocytes. Leukocytes were found laden with nanoprobes, indicating the potential for payload transport across the blood-retinal barrier. Our results establish the translational potential of these newly generated nanoprobes in early diagnosis of DR.

Bright and Stable Nanomaterials for Imaging and Sensing

This review covers strategies to prepare high-performance emissive polymer nanomaterials, combining very high brightness and photostability, to respond to the drive for better imaging quality and lower detection limits in fluorescence imaging and sensing applications. The more common approaches to obtaining high-brightness nanomaterials consist of designing polymer nanomaterials carrying a large number of fluorescent dyes, either by attaching the dyes to individual polymer chains or by encapsulating the dyes in nanoparticles. In both cases, the dyes can be covalently linked to the polymer during polymerization (by using monomers functionalized with fluorescent groups), or they can be incorporated post-synthesis, using polymers with reactive groups, or encapsulating the unmodified dyes. Silica nanoparticles in particular, obtained by the condensation polymerization of silicon alcoxides, provide highly crosslinked environments that protect the dyes from photodegradation and offer excellent chemical modification flexibility. An alternative and less explored strategy is to increase the brightness of each individual dye. This can be achieved by using nanostructures that couple dyes to plasmonic nanoparticles so that the plasmon resonance can act as an electromagnetic field concentrator to increase the dye excitation efficiency and/or interact with the dye to increase its emission quantum yield.

Challenges in the Direct Detection of Chirality-induced Spin Selectivity: Investigation of Foldamer-based Donor-acceptor Dyads

Over the past two decades, the chirality-induced spin selectivity (CISS) effect was reported in several experiments disclosing a unique connection between chirality and electron spin. Recent theoretical works highlighted time-resolved Electron Paramagnetic Resonance (trEPR) as a powerful tool to directly detect the spin polarization resulting from CISS. Here, we report a first attempt to detect CISS at the molecular level by linking the pyrene electron donor to the fullerene acceptor with chiral peptide bridges of different length and electric dipole moment. The dyads are investigated by an array of techniques, including cyclic voltammetry, steady-state and transient optical spectroscopies, and trEPR. Despite the promising energy alignment of the electronic levels, our multi-technique analysis reveals no evidence of electron transfer (ET), highlighting the challenges of spectroscopic detection of CISS. However, the analysis allows the formulation of guidelines for the design of chiral organic model systems suitable to directly probe CISS-polarized ET.

Pyrene-Containing Polyamines as Fluorescent Receptors for Recognition of PFOA in Aqueous Media

The globally widespread perfluorooctanoic acid (PFOA) is a concerning environmental contaminant, with a possible toxic long-term effects on the environment and human health The development of sensible, rapid, and low-cost detection systems is a current change in modern environmental chemistry. In this context, two triamine-based chemosensors, L1 and L2, containing a fluorescent pyrene unit, and their Zn(II) complexes are proposed as fluorescent probes for the detection of PFOA in aqueous media. Binding studies carried out by means of fluorescence and NMR titrations highlight that protonated forms of the receptors can interact with the carboxylate group of PFOA, thanks to salt bridge formation with the ammonium groups of the aliphatic chain. This interaction induces a decrease in the fluorescence emission of pyrene at neutral and slightly acidic pH values. Similarly, emission quenching has also been observed upon coordination of PFOA by the Zn(II) complexes of the receptors. These results evidence that simple polyamine-based molecular receptors can be employed for the optical recognition of harmful pollutant molecules, such as PFOA, in aqueous media.

Revolutionizing Food Safety with Quantum Dot-Polymer Nanocomposites: From Monitoring to Sensing Applications

The present review article investigates the prospective utilisation of quantum dot-polymer nanocomposites in the context of ensuring food safety. The text pertains to the advancement of nanocomposites, encompassing their distinctive optical and electrical characteristics, and their prospective to transform the detection and perception of food safety risks. The article explores diverse methodologies for producing nanocomposites and underscores their potential utility in identifying impurities, microorganisms, and harmful substances in food. The article provides an overview of the challenges and limitations associated with the utilisation of nanocomposites in food safety applications, encompassing concerns regarding toxicity and the necessity for standardised protocols. The review article presents a comprehensive examination of the present research status in this area and underscores the potential of quantum dots-polymer nanocomposites in transforming food safety monitoring and sensing.

Static quenching upon adduct formation: a treatment without shortcuts and approximations

Luminescence quenching is a process exploited in transversal applications in science and technology and it has been studied for a long time. The luminescence quenching mechanisms are typically distinguished in dynamic (collisional) and static, which can require different quantitative treatments. This is particularly important - and finds broad and interdisciplinary application - when the static quenching is caused by the formation of an adduct between the luminophore - at the ground state - and the quencher. Due to its nature, this case should be treated starting from the well-known law of mass action although, in specific conditions, general equations can be conveniently reduced to simpler ones. A proper application of simplified equations, though, can be tricky, with frequent oversimplifications taking to severe errors in the interpretation of the photophysical data. This tutorial review aims to (i) identify the precise working conditions for the application of the simplified equations of static quenching and to (ii) provide general equations for broadest versatility and applicability. The latter equations can be used even beyond the sole case of pure quenching, i.e., in the cases of partial quenching and even luminescence turn-on. Finally, we illustrate different applications of the equations via a critical discussion of examples in the field of sensing, supramolecular chemistry and nanotechnology.

Upconversion luminescent nanomaterials: A promising new platform for food safety analysis

Foodborne diseases have become a significant threat to public health worldwide. Development of analytical techniques that enable fast and accurate detection of foodborne pathogens is significant for food science and safety research. Assays based on lanthanide (Ln) ion-doped upconversion nanoparticles (UCNPs) show up as a cutting edge platform in biomedical fields because of the superior physicochemical features of UCNPs, including negligible autofluorescence, large signal-to-noise ratio, minimum photodamage to biological samples, high penetration depth, and attractive optical and chemical features. In recent decades, this novel and promising technology has been gradually introduced to food safety research. Herein, we have reviewed the recent progress of Ln³⁺-doped UCNPs in food safety research with emphasis on the following aspects: 1) the upconversion mechanism and detection principles; 2) the history of UCNPs development in analytical chemistry; 3) the in-depth state-of-the-art synthesis strategies, including synthesis protocols for UCNPs, luminescence, structure, morphology, and surface engineering; 4) applications of UCNPs in foodborne pathogens detection, including mycotoxins, heavy metal ions, pesticide residue, antibiotics, estrogen residue, and pathogenic bacteria; and 5) the challenging and future perspectives of using UCNPs in food safety research. Considering the diversity and complexity of the foodborne harmful substances, developing novel detections and quantification techniques and the rigorous investigations about the effect of the harmful substances on human health should be accelerated.

Core-Shell Pluronic-Organosilica Nanoparticles with Controlled Polarity and Oxygen Permeability

Nanostructured systems constitute versatile carriers with multiple functions engineered in a nanometric space. Yet, such multimodality often requires adapting the chemistry of the nanostructure to the properties of the hosted functional molecules. Here, we show the preparation of core-shell Pluronic-organosilica "PluOS" nanoparticles with the use of a library of organosilane precursors. The precursors are obtained via a fast and quantitative click reaction, starting from cost-effective reagents such as diamines and an isocyanate silane derivative, and they condensate in building blocks characterized by a balance between hydrophobic and H-bond-rich domains. As nanoscopic probes for local polarity, oxygen permeability, and solvating properties, we use, respectively, solvatochromic, phosphorescent, and excimer-forming dyes covalently linked to the organosilica matrix during synthesis. The results obtained here clearly show that the use of these organosilane precursors allows for finely tuning polarity, oxygen permeability, and solvating properties of the resulting organosilica core, expanding the toolbox for precise engineering of the particle properties.

Ratiometric Nanoparticle Probe Based on FRET-Amplified Phosphorescence for Oxygen Sensing with Minimal Phototoxicity

Luminescent oxygen probes enable direct imaging of hypoxic conditions in cells and tissues, which are associated with a variety of diseases, including cancer. Here, a nanoparticle probe that addresses key challenges in the field is developed, it: i) strongly amplifies room temperature phosphorescence of encapsulated oxygen-sensitive dyes; ii) provides ratiometric response to oxygen; and iii) solves the fundamental problem of phototoxicity of phosphorescent sensors. The nanoprobe is based on 40 nm polymeric nanoparticles, encapsulating ≈2000 blue-emitting cyanine dyes with fluorinated tetraphenylborate counterions, which are as bright as 70 quantum dots (QD525). It functions as a light-harvesting nanoantenna that undergoes efficient Förster resonance energy transfer to ≈20 phosphorescent oxygen-sensitive platinum octaethylporphyrin (PtOEP) acceptor dyes. The obtained nanoprobe emits stable blue fluorescence and oxygen-sensitive red phosphorescence, providing ratiometric response to dissolved oxygen. The light harvesting leads to ≈60-fold phosphorescence amplification and makes the single nanoprobe particle as bright as ≈1200 PtOEP dyes. This high brightness enables oxygen detection at a single-particle level and in cells at ultra-low nanoprobe concentration with no sign of phototoxicity, in contrast to PtOEP dye. The developed nanoprobe is successfully applied to the imaging of a microfluidics-generated oxygen gradient in cancer cells. It constitutes a promising tool for bioimaging of hypoxia.

Synthetic Tuning of CoII-Doped Silica Nanoarchitecture Towards Electrochemical Sensing Ability

The present work introduces both synthesis of silica nanoparticles doped with CoII ions by means of differently modified microemulsion water-in-oil (w/o) and Stöber techniques and characterization of the hybrid nanoparticles (CoII@SiO2) by TEM, DLS, XRD, ICP-EOS, SAXS, UV-Vis, and UV-Vis/DR spectroscopy and electrochemical methods. The results reveal the lack of nanocrystalline dopants inside the hybrid nanoparticles, as well as no ligands, when CoII ions are added to the synthetic mixtures as CoII(bpy)3 complexes, thus pointing to coordination of CoII ions with Si-O- groups as main driving force of the doping. The UV-Vis/DR spectra of CoII@SiO2 in the range of d-d transitions indicate that Stöber synthesis in greater extent than the w/o one stabilizes tetrahedral CoII ions versus the octahedral ions. Both cobalt content and homogeneity of the CoII distribution within CoII@SiO2 are greatly influenced by the synthetic technique. The electrochemical behavior of CoII@SiO2 is manifested by one oxidation and two reduction steps, which provide the basis for electrochemical response on glyphosate and HP(O)(OEt)2 with the LOD = 0.1 μM and the linearity within 0.1-80 μM. The Stöber CoII@SiO2 are able to discriminate glyphosate from HP(O)(OEt)2, while the w/o nanoparticles are more efficient but nonselective sensors on the toxicants.

Specific, Surface-Driven, and High-Affinity Interactions of Fluorescent Hyaluronan with PEGylated Nanomaterials

Hybrid nanomaterials are a subject of extensive research in nanomedicine, and their clinical application is reasonably envisaged in the near future. However, the fate of nanomaterials in biological environments poses serious limitations to their application; therefore, schemes to monitor them and gain control on their toxicity could be of great help for the development of the field. Here, we propose a probe for PEGylated nanosurfaces based on hyaluronic acid (HA) functionalized with rhodamine B (RB). We show that the high-affinity interaction of this fluorogenic hyaluronan (HA-RB) with nanoparticles exposing PEGylated surfaces results in their sensing, labeling for super-resolution imaging, and synergistic cellular internalization. HA-RB forms nanogels that interact with high affinity-down to the picomolar range-with silica nanoparticles, selectively when their surface is covered by a soft and amphiphilic layer. This surface-driven interaction triggers the enhancement of the luminescence intensity of the dyes, otherwise self-quenched in HA-RB nanogels. The sensitive labeling of specific nanosurfaces also allowed us to obtain their super-resolution imaging via binding-activated localization microscopy (BALM). Finally, we show how this high-affinity interaction activates a synergistic cellular uptake of silica nanoparticles and HA-RB nanogels, followed by a differential fate of the two partner nanomaterials inside cells.

Medical fluorophore 1 (MF1), a benzoquinolizinium-based fluorescent dye, as an inflammation imaging agent

Structure-based targeting of fluorescent dyes is essential for their use as imaging agents for disease diagnosis. Here, we describe the development of the benzoquinolizinium compound Medical fluorophore 1 (MF1) as a novel biomedical imaging agent that allows the visualization of inflammation by virtue of its unique chemical structure. Lipopolysaccharide treatment stimulated the uptake of MF1 by bone marrow-derived macrophages, with no adverse effects on cell proliferation. In vivo fluorescence lifetime imaging revealed the accumulation of MF1 in carrageenan-induced acute inflammatory lesions in mice, which peaked at 6 h. MF1-based imaging also allowed monitoring of the response to the anti-inflammatory drugs dexamethasone and sulfasalazine. Thus, MF1 can be used to diagnose diseases characterized by inflammation as well as treatment efficacy.

Antiproliferative Ability and Fluorescence Tracking of α-Linolenic Acid-Loaded Microemulsion as Label-Free Delivery Carriers in MDA-MB-231 Cells

In this work, the effects of α-linolenic acid (ALA) loaded in oil-in-water (O/W) and water-in-oil-in-water (W/O/W) microemulsions on cell viability, lactic dehydrogenase (LDH) viability, and reactive oxygen species (ROS) levels were examined using Cell Counting Kit-8 (CCK-8), an LDH assay kit, and a fluorescence microscope, respectively. The CCK-8 assay demonstrated that ALA inhibited MDA-MB-231 human breast cancer cell proliferation in a dose-dependent manner. Further, the results of LDH activity and ROS levels revealed that ALA-induced cancer cell damage was closely related to oxidative stress. Under the irradiation of ultraviolet light, the microemulsion without any added fluorescent dye would emit bright blue fluorescence, and the fluorescent images of the cells treated with ALA-loaded O/W and W/O/W microemulsions at different incubation times were taken, which exhibited long-term photostability and biocompatibility. In addition, the fluorescence mechanism of the microemulsion was explained by immobilizing surfactant molecules with aggregation-induced emission (AIE) properties at the water-oil interface through the microemulsion with a self-assembled structure. These findings showed the potential application of O/W and W/O/W microemulsions as the label-free delivery carriers in long-term imaging of living cells and real-time release monitoring of nutrients.

Ionic aggregation-induced emission dye with bulky counterions for preparation of bright near-infrared polymeric nanoparticles

Dyes exhibiting aggregation-induced emission (AIE) are attractive building blocks for the preparation of bright fluorescent nanomaterials. AIEgens are especially efficient in pure dye aggregates, whereas they are much less explored as dopants in NPs built of hydrophobic polymers. Here, we describe an approach that combines cationic AIEgens with bulky hydrophobic counterions (fluorinated tetraphenylborates) that enables preparation of small and bright AIEgen-loaded polymeric NPs. To this end, we synthesised a cationic tetraphenylethylene (TPE) derivative and studied its salts with counterions of different sizes and hydrophobicities. In organic solvent/water mixtures, all these salts exhibited typical AIE behaviour, whereas only salts with bulky hydrophobic counterions exhibited strongly red-shifted emission in the near-infrared (NIR) region. Encapsulation of these salts into poly(methyl methacrylate-co-methacrylic acid) (PMMA-MA) NPs revealed that bulky counterions ensure (i) formation of small (∼50 nm) AIEgen-loaded polymeric NPs; (ii) good fluorescence quantum yield (up to 30%); and (iii) NIR emission reaching 700 nm. By contrast, AIEgens with small inorganic anions (perchlorate and hexafluorophosphate) blended with PMMA-MA produced large aggregates with emission in the far-red region. Single-particle microscopy revealed that our 50 nm AIEgen-loaded PMMA-MA NPs were 6-fold brighter than the NIR emitting quantum dots (QD705). These NPs feature low cytotoxicity and compatibility with live cell imaging, in contrast to large aggregates of AIEgens with small inorganic counterions that failed to internalize into the cells. The present work shows that combination of cationic AIEgens with bulky counterions opens new routes for the preparation of bright polymer-based nanomaterials.

Förster Resonance Energy Transfer-Activated Processes in Smart Nanotheranostics Fabricated in a Sustainable Manner

Multilayer nanocarriers loaded with optically activated payloads are gaining increasing attention due to their anticipated crucial role for providing new mechanisms of energy transfers in the health-oriented applications, as well as for energy storage and environmental protection. The combination of careful selection of optical components for efficient Förster resonance energy transfer, and surface engineering of the nanocarriers, allowed us to synthesize and characterize novel theranostic nanosystems for diagnosis and therapy of deep-seated tumors. The cargo, constrained within the oil core of the nanocapsules, composed of NaYF₄ :Tm⁺³ , Yb⁺³ up-converting nanoparticles together with a second-generation porphyrin-based photosensitizing agent-Verteporfin, assured requisite diagnostic and therapeutic functions under near-IR laser excitation. The outer polyaminoacid shell of the nanocapsules was functionalized with a ligand-poly(l-glutamic acid) functionalized by PEG-ylated folic acid-to ensure both a "stealth" effect and active targeting towards human breast cancer cells. The preparation criteria of all nanocarrier building blocks meet the requirements for sustainable and green chemistry practices. The multifunctionality of the proposed nanocarriers is a consequence of both the surface-functionalized organic exterior part, which was accessible for selective accumulation in cancer cells, and the hydrophobic optically active interior, which shows phototoxicity upon irradiation within the first biological window.

Mapping heterogeneous polarity in multicompartment nanoparticles

Understanding polarity gradients inside nanomaterials is essential to capture their potential as nanoreactors, catalysts or in drug delivery applications. We propose here a method to obtain detailed, quantitative information on heterogeneous polarity in multicompartment nanostructures. The method is based on a 2-steps procedure, (i) deconvolution of complex emission spectra of two solvatochromic probes followed by (ii) spectrally resolved analysis of FRET between the same solvatochromic dyes. While the first step yields a list of polarities probed in the nanomaterial suspension, the second step correlates the polarities in space. Colocalization of polarities falling within few nanometer radius is obtained via FRET, a process called here nanopolarity mapping. Here, Prodan and Nile Red are tested to map the polarity of a water-dispersable, multicompartment nanostructure, named PluS nanoparticle (NPs). PluS NPs are uniform core-shell nanoparticles with silica cores (diameter ~10 nm) and Pluronic F127 shell (thickness ~7 nm). The probes report on a wide range of nanopolarities among which the dyes efficiently exchange energy via FRET, demonstrating the coexistence of a rich variety of environments within nanometer distance. Their use as a FRET couple highlights the proximity of strongly hydrophobic sites and hydrated layers, and quantitatively accounts for the emission component related to external water, which remains unaffected by FRET processes. This method is general and applicable to map nanopolarity in a large variety of nanomaterials.

DNA-Functionalized Dye-Loaded Polymeric Nanoparticles: Ultrabright FRET Platform for Amplified Detection of Nucleic Acids

Going beyond the limits of optical biosensing motivates exploration of signal amplification strategies that convert a single molecular recognition event into a response equivalent to hundreds of fluorescent dyes. In this respect, Førster Resonance Energy Transfer (FRET) with bright fluorescent nanoparticles (NPs) is an attractive direction, but it is limited by poor efficiency of NPs as FRET donors, because their size is typically much larger than the Førster radius (∼5 nm). Here, we established FRET-based nanoparticle probes that overcome this fundamental limitation by exploiting a phenomenon of giant light harvesting with thousands of strongly coupled dyes in a polymer matrix. These nanoprobes are based on 40 nm dye-loaded poly(methyl methacrylate- co-methacrylic acid) (PMMA-MA) NPs, so-called light-harvesting nanoantennas, which are functionalized at their surface with oligonucleotides. To achieve this functionalization, we developed an original methodology: PMMA-MA was modified with azide/carboxylate bifunctional group that enabled assembly of small polymeric NPs and their further Cu-free click coupling with oligonucleotides. The obtained functionalized nanoantenna behaves as giant energy donor, where hybridization of target nucleic acid (encoding survivin cancer marker) with ∼23 grafted oligonucleotides/Cy5-acceptors switches on/off FRET from ∼3200 rhodamine-donors of the nanoantenna, leading to 75-fold signal amplification. In solution and on surfaces at single-particle level, the nanoprobe provides sequence-specific two-color ratiometric response to nucleic acids with limit of detection reaching 0.25 pM. It displays unprecedented brightness for a FRET biosensor: it outperforms analogous FRET-based molecular probe by >2000-fold and QDot-605 by ∼100-fold. The developed concept of amplified sensing will increase orders of magnitude sensitivity of fluorescent probes for biomolecular targets.

Thermochemiluminescent semiconducting polymer dots as sensitive nanoprobes for reagentless immunoassay

Thermochemiluminescence (TCL) is a potentially simple and sensitive detection principle, as the light emission is simply elicited by thermally-triggered decomposition of a molecule to produce a singlet excited-state product. Here we report about TCL semiconductive polymer dots (TCL-Pdots) obtained by doping fluorescent cyano-polyphenylene vinylene (CN-PPV) Pdots with an acridine 1,2-dioxetane derivative. The TCL-Pdots showed remarkable stability over time and minimum leaching of the thermo-responsive species. Furthermore, detectability of TCL-Pdots was improved by taking advantage of both the high number of 1,2-dioxetanes entrapped in each nanoparticle (about 20 molecules per Pdot) and the 5-fold enhancement of TCL emission due to energy transfer from 1,2-dioxetane to the polymer matrix, which itself acted as an energy acceptor. Indeed, upon heating the TCL-Pdots to 110 °C, 1,2-dioxetane decomposes generating an acridanone product in its electronically excited state. The latter transfers its energy to the surrounding CN-PPV chains via the Förster mechanism (φFRET about 80%), resulting in intense yellow light emission (550 nm wavelength). We next conjugated streptavidin onto the surface of these TCL-Pdots and demonstrated their suitability for use in biological studies. In particular, we used TCL-Pdots as labels in a model non-competitive immunoassay for IgG detection, which showed a LOD of 13 nM IgG and a dynamic range extending up to 230 nM. By combining the biocompatibility, brightness and tunability of Pdot fluorescence emission with the thermally-triggered reagentless light generation from TCL 1,2-dioxetanes, a broad panel of ultrabright TCL nanosystems could be designed for a variety of bioscience applications, even in multiplexed formats.

Quantitative Assessment of Nanoparticle Biodistribution by Fluorescence Imaging, Revisited

Fluorescence-based whole-body imaging is widely used in the evaluation of nanoparticles (NPs) in small animals, often combined with quantitative analysis to indicate their spatiotemporal distribution following systemic administration. An underlying assumption is that the fluorescence label represents NPs and the intensity increases with the amount of NPs and/or the labeling dyes accumulated in the region of interest. We prepare DiR-loaded poly(lactic- co-glycolic acid) (PLGA) NPs with different surface layers (polyethylene glycol with and without folate terminus) and compare the distribution of fluorescence signals in a mouse model of folate-receptor-expressing tumors by near-infrared fluorescence whole-body imaging. Unexpectedly, we observe that fluorescence distribution patterns differ far more dramatically with DiR loading than with the surface ligand, reaching opposite conclusions with the same type of NPs (tumor-specific delivery vs predominant liver accumulation). Analysis of DiR-loaded PLGA NPs reveals that fluorescence quenching, dequenching, and signal saturation, which occur with the increasing dye content and local NP concentration, are responsible for the conflicting interpretations. This study highlights the critical need for validating fluorescence labeling of NPs in the quantitative analysis of whole-body imaging. In light of our observation, we make suggestions for future whole-body fluorescence imaging in the in vivo evaluation of NP behaviors.

Cooperative and FRET-Assisted Brightness Enhancement in Oligo(phenylene ethynylene): Quantum Dot Organic-Inorganic Nanohybrids

Herein, we combine the ideas of concerted emission from fluorophore ensembles and its further amplification through FRET in an organic-inorganic hybrid approach. Spherical and highly fluorescent organic nanoparticles (FONPs, Φ_f =0.38), prepared by the self-assembly of oligo(phenylene ethynylene) (OPE) molecules, were selected as a potential donor material. This organic core was then decorated with a shell of fluorescent CdSe/ZnS core-shell quantum dots (QDs; <d>≅5.5 nm, Φ_f =0.27) with the aid of a bifunctional ligand, mercaptopropionic acid. Its high extinction coefficient (ϵ≈4.1×10⁵  m^-1  cm^-1 ) and good spectral match with the emission of the FONPs (J(λ)≈4.08×10¹⁶  m^-1  cm^-1  nm⁴ ) made them a better acceptor candidate to constitute an efficient FRET pair (Φ_FRET =0.8). As a result, the QD fluorescence intensity was enhanced by more than twofold. The fundamental calculations carried out indicated an improvement in all the FRET parameters as the number of QDs around the FONPs was increased. This, together with the localization of multiple QDs in a nanometric dimension (volume≈1.8×10⁶  nm³ ), gave highly bright reddish luminescent hybrid particles as visualized under a fluorescence microscope.

Highly Fluorescent Magnetic Nanobeads with a Remarkable Stokes Shift as Labels for Enhanced Detection in Immunoassays

Fluorescence immunoassays are popular for achieving high sensitivity, but they display limitations in biological samples due to strong absorption of light, background fluorescence from matrix components, or light scattering by the biomacromolecules. A powerful strategy to overcome these problems is introduced here by using fluorescent magnetic nanobeads doped with two boron-dipyrromethane dyes displaying intense emission in the visible and near-infrared regions, respectively. Careful matching of the emission and absorption features of the dopants leads to a virtual Stokes shift larger than 150 nm achieved by an intraparticle Förster resonance energy transfer (FRET) process between the donor and the acceptor dyes. Additionally, the magnetic properties of the fluorescent beads allow preconcentration of the sample. To illustrate the usefulness of this approach to increase the sensitivity of fluorescence immunoassays, the novel nanoparticles are employed as labels for quantification of the widely used Tacrolimus (FK506) immunosuppressive drug. The FRET-based competitive inhibition immunoassay yields a limit of detection (LOD) of 0.08 ng mL^-1 , with a dynamic range (DR) of 0.15-2.0 ng mL^-1 , compared to a LOD of 2.7 ng mL^-1 and a DR between 4.1 and 130 ng mL^-1 for the immunoassay carried out with direct excitation of the acceptor dye.

Giant light-harvesting nanoantenna for single-molecule detection in ambient light

Here, we explore the enhancement of single molecule emission by polymeric nano-antenna that can harvest energy from thousands of donor dyes to a single acceptor. In this nano-antenna, the cationic dyes are brought together in very close proximity using bulky counterions, thus enabling ultrafast diffusion of excitation energy (≤30 fs) with minimal losses. Our 60-nm nanoparticles containing >10,000 rhodamine-based donor dyes can efficiently transfer energy to 1-2 acceptors resulting in an antenna effect of ~1,000. Therefore, single Cy5-based acceptors become 25-fold brighter than quantum dots QD655. This unprecedented amplification of the acceptor dye emission enables observation of single molecules at illumination powers (1-10 mW cm^-2) that are >10,000-fold lower than typically required in single-molecule measurements. Finally, using a basic setup, which includes a 20X air objective and a sCMOS camera, we could detect single Cy5 molecules by simply shining divergent light on the sample at powers equivalent to sunlight.

Novel Fluorescent Microemulsion: Probing Properties, Investigating Mechanism, and Unveiling Potential Application

Nanoscale microemulsions have been utilized as delivery carriers for nutraceuticals and active biological drugs. Herein, we designed and synthesized a novel oil in water (O/W) fluorescent microemulsion based on isoamyl acetate, polyoxyethylene castor oil EL (CrEL), and water. The microemulsion emitted bright blue fluorescence, thus exhibiting its potential for active drug detection with label-free strategy. The microemulsion exhibited excitation-dependent emission and distinct red shift with longer excitation wavelengths. Lifetime and quantum yield of fluorescent microemulsion were 2.831 ns and 5.0%, respectively. An excellent fluorescent stability of the microemulsion was confirmed by altering pH, ionic strength, temperature, and time. Moreover, we proposed a probable mechanism of fluorochromic phenomenon, in connection with the aromatic ring structure of polyoxyethylene ether substituent in CrEL. Based on our findings, we concluded that this new fluorescent microemulsion is a promising drug carrier that can facilitate active drug detection with a label-free strategy. Although further research is required to understand the exact mechanism behind its fluorescence property, this work provided valuable guidance to develop new biosensors based on fluorescent microemulsion.

Photochrome-doped organic films for photonic keypad locks and multi-state fluorescence

The spectroscopic properties of poly(methyl methacrylate) polymer films doped with two kinds of photochromic molecular switches are investigated. A green-fluorescent sulfonyl diarylethene (P1) is combined with either a non-fluorescent diarylethene (P2) or red-fluorescent spiropyran (P3). Photoswitching between the colorless and colored isomers (P1: o-BTFO4 ↔ c-BTFO4, P2: o-DTE ↔ c-DTE, P3: SP ↔ MC) enables the P1 + P2 and P1 + P3 films to be cycled through three distinct states. From the initial state (o-BTFO4 + o-DTE/SP), irradiation with UV light generates the second state (c-BTFO4 + c-DTE/MC), where c-BTFO4 → c-DTE/MC energy transfer is established. Irradiation with green light then generates the third state (c-BTFO4 + o-DTE/SP), where the energy transfer acceptor is no longer present. Finally, irradiation with blue light regenerates the initial state. For the P1 + P2 film, only one state is fluorescent, with the irradiation inputs required to be entered in the correct order to access this state, acting as a keypad lock. For the P1 + P3 film, the states emit either no fluorescence, red fluorescence, or green fluorescence, all using a common excitation wavelength. Additionally, once the fluorescence is activated with UV light, it undergoes a time-dependent color transition from red to green, due to the pairing of P-type and T-type photochromes. These multi-photochromic systems may be useful for security ink or imaging applications.

Protein-Sized Bright Fluorogenic Nanoparticles Based on Cross-Linked Calixarene Micelles with Cyanine Corona

The key challenge in the field of fluorescent nanoparticles (NPs) for biological applications is to achieve superior brightness for sizes equivalent to single proteins (3-7 nm). We propose a concept of shell-cross-linked fluorescent micelles, in which PEGylated cyanine 3 and 5 bis-azides form a covalently attached corona on micelles of amphiphilic calixarene bearing four alkyne groups. The fluorescence quantum yield of the obtained monodisperse NPs, with a size of 7 nm, is a function of viscosity and reached up to 15 % in glycerol. In the on-state they are circa 2-fold brighter than quantum dots (QD-585), which makes them the smallest PEGylated organic NPs of this high brightness. FRET between cyanine 3 and 5 cross-linkers at the surface of NPs suggests their integrity in physiological media, organic solvents, and living cells, in which the NPs rapidly internalize, showing excellent imaging contrast. Calixarene micelles with a cyanine corona constitute a new platform for the development of protein-sized ultrabright fluorescent NPs.

Multimodal near-infrared-emitting PluS Silica nanoparticles with fluorescent, photoacoustic, and photothermal capabilities

Purpose

The aim of the present study was to develop nanoprobes with theranostic features, including – at the same time – photoacoustic, near-infrared (NIR) optical imaging, and photothermal properties, in a versatile and stable core–shell silica-polyethylene glycol (PEG) nanoparticle architecture.

Materials and methods

We synthesized core–shell silica-PEG nanoparticles by a one-pot direct micelles approach. Fluorescence emission and photoacoustic and photothermal properties were obtained at the same time by appropriate doping with triethoxysilane-derivatized cyanine 5.5 (Cy5.5) and cyanine 7 (Cy7) dyes. The performances of these nanoprobes were measured in vitro, using nanoparticle suspensions in phosphate-buffered saline and blood, dedicated phantoms, and after incubation with MDA-MB-231 cells.

Results

We obtained core–shell silica-PEG nanoparticles endowed with very high colloidal stability in water and in biological environment, with absorption and fluorescence emission in the NIR field. The presence of Cy5.5 and Cy7 dyes made it possible to reach a more reproducible and higher doping regime, producing fluorescence emission at a single excitation wavelength in two different channels, owing to the energy transfer processes within the nanoparticle. The nanoarchitecture and the presence of both Cy5.5 and Cy7 dyes provided a favorable agreement between fluorescence emission and quenching, to achieve optical imaging and photoacoustic and photothermal properties.

Conclusion

We obtained rationally designed nanoparticles with outstanding stability in biological environment. At appropriate doping regimes, the presence of Cy5.5 and Cy7 dyes allowed us to tune fluorescence emission in the NIR for optical imaging and to exploit quenching processes for photoacoustic and photothermal capabilities. These nanostructures are promising in vivo theranostic tools for the near future.

Functionalized dye encapsulated polymer nanoparticles attached with a BSA scaffold as efficient antenna materials for artificial light harvesting

A potential strategy for a new generation light harvesting system is multi-chromophoric donor-acceptor pairs where light energy is absorbed by an antenna complex and subsequently transfers its energy to the acceptor via energy transfer. Here, we design a system of a functionalized polymer nanoparticle-protein scaffold for efficient light harvesting and white light generation where a dye doped polymer nanoparticle acts as a donor and a dye encapsulated BSA protein acts as an acceptor. Analysis reveals that 91.3% energy transfer occurs from the dye doped polymer nanoparticle to the dye encapsulated BSA protein. The antenna effect of this light harvesting system is found to be 31 at a donor to acceptor ratio of 0.82 : 1 which is unprecedented. The enhanced effective molar extinction coefficient of the acceptor dye is potential for the light harvesting system. Bright white light emission with a quantum yield of 14% under single wavelength excitation is obtained by changing the ratio of donor to acceptor. Analysis reveals that the efficient energy transfer in this polymer-protein assembly may open up new possibilities in designing artificial light harvesting systems for future applications.

Polymeric nanocapsules with up-converting nanocrystals cargo make ideal fluorescent bioprobes

An innovative approach for up-converting nanoparticles adaptation for bio-related and theranostic applications is presented. We have successfully encapsulated multiple, ~8 nm in size NaYF₄ nanoparticles inside the polymeric nanocarriers with average size of ~150 nm. The initial coating of nanoparticles surfaces was preserved due to the hydrophobic environment inside the nanocapsules, and thus no single nanoparticle surface functionalization was necessary. The selection of biodegradable and sugar-based polyelectrolyte shells ensured biocompatibility of the nanostructures, while the choice of Tm³⁺ and Yb³⁺ NaYF₄ nanoparticles co-doping allowed for near-infrared to near-infrared bioimaging of healthy and cancerous cell lines. The protective role of organic shell resulted in not only preserved high up-converted emission intensity and long luminescence lifetimes, without quenching from water environment, but also ensured low cytotoxicity and high cellular uptake of the engineered nanocapsules. The multifunctionality of the proposed nanocarriers is a consequence of both the organic exterior part that is accessible for conjugation with biologically important molecules, and the hydrophobic interior, which in future application may be used as a container for co-encapsulation of inorganic nanoparticles and anticancer drug cargo.

Upconversion Nanoparticles and Monodispersed Magnetic Polystyrene Microsphere Based Fluorescence Immunoassay for the Detection of Sulfaquinoxaline in Animal-Derived Foods

A novel fluorescence immunoassay for detecting sulfaquinoxaline (SQX) in animal-derived foods was developed using NaYF4:Yb/Tm upconversion nanoparticles (UCNPs) conjugated with antibodies as fluorescence signal probes, and monodisperse magnetic polystyrene microspheres (MMPMs) modified with coating antigen as immune-sensing capture probes for trapping and separating the signal probes. Based on a competitive immunoassay format, the detection limit of the proposed method for detecting SQX was 0.1 μg L(-1) in buffer and 0.5 μg kg(-1) in food samples. The recoveries of SQX in spiked samples ranged from 69.80 to 133.00%, with coefficients of variation of 0.24-25.06%. The extraction procedure was fast, simple, and environmentally friendly, requiring no organic solvents. In particular, milk samples can be analyzed directly after simple dilution. This method has appealing properties, such as sensitive fluorescence response, a simple and fast extraction procedure, and environmental friendliness, and could be applied to detecting SQX in animal-derived foods.

Fluorescent Polymer Nanoparticles Based on Dyes: Seeking Brighter Tools for Bioimaging

Speed, resolution and sensitivity of today's fluorescence bioimaging can be drastically improved by fluorescent nanoparticles (NPs) that are many-fold brighter than organic dyes and fluorescent proteins. While the field is currently dominated by inorganic NPs, notably quantum dots (QDs), fluorescent polymer NPs encapsulating large quantities of dyes (dye-loaded NPs) have emerged recently as an attractive alternative. These new nanomaterials, inspired from the fields of polymeric drug delivery vehicles and advanced fluorophores, can combine superior brightness with biodegradability and low toxicity. Here, we describe the strategies for synthesis of dye-loaded polymer NPs by emulsion polymerization and assembly of pre-formed polymers. Superior brightness requires strong dye loading without aggregation-caused quenching (ACQ). Only recently several strategies of dye design were proposed to overcome ACQ in polymer NPs: aggregation induced emission (AIE), dye modification with bulky side groups and use of bulky hydrophobic counterions. The resulting NPs now surpass the brightness of QDs by ≈10-fold for a comparable size, and have started reaching the level of the brightest conjugated polymer NPs. Other properties, notably photostability, color, blinking, as well as particle size and surface chemistry are also systematically analyzed. Finally, major and emerging applications of dye-loaded NPs for in vitro and in vivo imaging are reviewed.

A novel graphene-based label-free fluorescence 'turn-on' nanosensor for selective and sensitive detection of phosphorylated species in biological samples and living cells

A novel label-free fluorescence 'turn-on' nanosensor has been developed for highly selective and sensitive detection of phosphorylated species (Ps) in biological samples and living cells. The design strategy relies on the use of Ti(4+)-immobilized polydopamine (PDA) coated reduced graphene oxide (rGO@PDA-Ti(4+)) that serves as an attractive platform to bind riboflavin 5'-monophosphate molecules (FMNs) through ion-pair interactions between phosphate groups and Ti(4+). The as-prepared rGO@PDA-Ti(4+)-FMNs (nanosensor), fluoresce only weakly due to the ineffective Förster resonance energy transfer between the FMNs and rGO@PDA-Ti(4+). The experimental findings revealed that the microwave-assisted interaction of the nanosensor with α-, β-casein, ovalbumin, human serum, non-fat milk, egg white, and living cells (all containing Ps) releases FMNs (due to the high formation constant between phosphate groups and Ti(4+)), leading to an excellent fluorescence 'turn-on' response. The fluorescence spectroscopy, confocal microscopy, and MALDI-TOF MS spectrometry were used to detect Ps both qualitatively and quantitatively. Under the optimized conditions, the nanosensor showed a detection limit of ca. 118.5, 28.9, and 54.8 nM for the tryptic digests of α-, β-casein and ovalbumin, respectively. Furthermore, the standard addition method was used as a bench-mark proof for phosphopeptide quantification in egg white samples. We postulate that the present quantitative assay for Ps holds tremendous potential and may pave the way to disease diagnostics in the near future.

Blue to near-IR energy transfer cascade within a dye-doped polymer matrix, mediated by a photochromic molecular switch

The spectroscopic properties of a poly(methyl methacrylate) matrix doped with a coumarin dye, a cyanine dye, and a photochromic spiropyran dye have been investigated. Before UV irradiation of the matrix, excitation of the coumarin dye results in minimal energy transfer to the cyanine dye. The energy transfer is substantially enhanced following UV irradiation of the matrix, which converts the colourless spiropyran isomer to the coloured merocyanine isomer, which then acts as an intermediate bridge by accepting energy from the coumarin dye and then donating energy to the cyanine dye. This demonstration of a switchable energy transfer cascade should help initiate new research directions in molecular photonics.

Dye-doped silica nanoparticle probes for fluorescence lifetime imaging of reductive environments in living cells

Dye-doped silica nanoparticle probes with rationally designed FRET acceptors enable fluorescence lifetime imaging of reductive environments in living cells.

Fluorinated counterion-enhanced emission of rhodamine aggregates: ultrabright nanoparticles for bioimaging and light-harvesting

The key to ultrabright fluorescent nanomaterials is the control of dye emission in the aggregated state. Here, lipophilic rhodamine B derivatives are assembled into nanoparticles (NPs) using tetraphenylborate counterions with varied fluorination levels that should tune the short-range dye ordering. Counterion fluorination is found to drastically enhance the emission characteristics of these NPs. Highly fluorinated counterions produce 10-20 nm NPs containing >300 rhodamine dyes with a fluorescence quantum yield of 40-60% and a remarkably narrow emission band (34 nm), whereas, for other counterions, aggregation caused quenching with a weak broad-band emission is observed. NPs with the most fluorinated counterion (48 fluorines) are ∼40-fold brighter than quantum dots (QD585 at 532 nm excitation) in single-molecule microscopy, showing improved photostability and suppressed blinking. Due to exciton diffusion, revealed by fluorescence anisotropy, these NPs are efficient FRET donors to single cyanine-5 acceptors with a light-harvesting antenna effect reaching 200. Finally, NPs with the most fluorinated counterion are rather stable after entry into living cells, in contrast to their less fluorinated analogue. Thus, the present work shows the crucial role of counterion fluorination in achieving high fluorescence brightness and photostability, narrow-band emission, efficient energy transfer and high intracellular stability of nanomaterials for light harvesting and bioimaging applications.