Urushiol-Based Coating with High Surface Hydrophilicity for Easy-Cleaning of Oil Pollutants

Urushiol is recognized as a sustainable coating material with superior properties; however, it faces significant challenges in applications such as petrochemicals and marine engineering due to surface oil contamination. This study aimed to enhance the cleanability of urushiol-based coatings through hydrophilic modification. Polyethylene glycol monooleate (PEGMO) was identified as an appropriate hydrophilic macromonomer and utilized as a modifier to develop a novel urushiol-based coating, termed P(U-PEGMO), via thermal curing. The results indicated that copolymerization occurred between urushiol and PEGMO during the curing process, forming a stable urushiol copolymer with favorable compatibility. The incorporation of PEGMO greatly improved the surface hydrophilicity of the coatings, as evidenced by a reduction in the water contact angle to below 30° when the modifier content reached 30% or higher, demonstrating a high degree of surface hydrophilicity. This enhanced property imparted the modified coating with underwater superoleophobicity and reduced oil adhesion, thereby facilitating the removal of oil. The cleaning performance was evaluated using a simple water rinsing method, after which, less than 2.5 wt% of oil residues remained on the surface of the modified coating. The high hydrophilicity is considered responsible for the coating's easy-cleaning capability. In addition, the modified coatings exhibited improved flexibility and impact resistance, albeit with a slight decrease in hardness.

Recent Advances in the Application of ATRP in the Synthesis of Drug Delivery Systems

Advances in atom transfer radical polymerization (ATRP) have enabled the precise design and preparation of nanostructured polymeric materials for a variety of biomedical applications. This paper briefly summarizes recent developments in the synthesis of bio-therapeutics for drug delivery based on linear and branched block copolymers and bioconjugates using ATRP, which have been tested in drug delivery systems (DDSs) over the past decade. An important trend is the rapid development of a number of smart DDSs that can release bioactive materials in response to certain external stimuli, either physical (e.g., light, ultrasound, or temperature) or chemical factors (e.g., changes in pH values and/or environmental redox potential). The use of ATRPs in the synthesis of polymeric bioconjugates containing drugs, proteins, and nucleic acids, as well as systems applied in combination therapies, has also received considerable attention.

Thiol-Lactam Initiated Radical Polymerization (TLIRP): Scope and Application for the Surface Functionalization of Nanoparticles

:

Controlled polymerization techniques make the possible fabrication of polymers with desired molecular weights, narrow dispersity, and tailor-making of advanced hybrid materials. Thiol- Lactam Initiated Radical Polymerization (TLIRP) was introduced in 2002 and developed during the last two decades. The thiol/lactam combination enables one to generate radicals that can initiate the polymerization of vinyl-based monomers. The study of the mechanism and kinetics of TLIRP revealed the characteristics of living polymerization for TLIRP. Moreover, TLIRP has been used successfully for the synthesis of homopolymers, block copolymers, and statistical copolymers with polydispersity below 2.0. Especially, TLIRP provides a very straightforward method for grafting polymer brushes on the surface of nanoparticles. We review herein the systems developed for TLIRP and their applications for macromolecular engineering, emphasizing the surface functionalization of nanoparticles via the grafting-from approach.

End-functionalized polymers by controlled/living radical polymerizations: synthesis and applications

This review focuses on end-functionalized polymers synthesized by controlled/living radical polymerizations and the applications in fields including bioconjugate formation, surface modification, topology construction, and self-assembly.

Designing a robust recyclable tricopolymer poly(ionic liquid) macroligand for copper-mediated atom transfer radical polymerization in non-aqueous biphasic systems

Herein, a robust thermoregulated poly(ionic liquid) macroligand was designed, synthesized and applied in an ICAR-based ATRP-TPSC system with efficient recycling/reuse.

ARGET ATRP of Triblock Copolymers (PMMA-b-PEO-b-PMMA) and Their Microstructure in Aqueous Solution

Triblock copolymers poly(methyl methacrylate)-b-poly(ethylene oxide)-b-poly(methyl methacrylate) (PMMA-b-PEO-b-PMMA) with designed molecular weight of PMMA and PEO blocks were synthesized via the activator regenerated by electron transfer (ARGET) atom transfer radical polymerization (ATRP) of MMA. The Br-terminated Br-PEO-Br with the molecular weights of 20k and 100k were used as  macroinitiators. ARGET ATRP was performed with ppm level amount CuBr2 as the catalyst and ascorbic acid as the reducing agent to overcome the sensitivity to oxygen in a traditional ATRP. The molecular weight of the PMMA block was manipulated by changing the molar ratio of monomers to the Br-PEO-Br macroinitiators. The synthesis of PMMA-b-PEO-b-PMMA and its structure was confirmed by Fourier transform infrared and 1H NMR, and the molecular weight of the PMMA block was determined by 1H NMR. Aqueous solutions of PMMA-b-PEO-b-PMMA were prepared by solvent-exchange, and their microstructures were examined by tensiometry, static light scattering, and transmission electron microscopy. The effects of molecular weight of the PMMA and PEO blocks on the microstructure were elucidated.

Design, Synthesis and Architectures of Hybrid Nanomaterials for Therapy and Diagnosis Applications

Hybrid nanomaterials based on inorganic nanoparticles and polymers are highly interesting structures since they combine synergistically the advantageous physical-chemical properties of both inorganic and polymeric components, providing superior functionality to the final material. These unique properties motivate the intensive study of these materials from a multidisciplinary view with the aim of finding novel applications in technological and biomedical fields. Choosing a specific synthetic methodology that allows for control over the surface composition and its architecture, enables not only the examination of the structure/property relationships, but, more importantly, the design of more efficient nanodevices for therapy and diagnosis in nanomedicine. The current review categorizes hybrid nanomaterials into three types of architectures: core-brush, hybrid nanogels, and core-shell. We focus on the analysis of the synthetic approaches that lead to the formation of each type of architecture. Furthermore, most recent advances in therapy and diagnosis applications and some inherent challenges of these materials are herein reviewed.

Cu(0)-RDRP of styrene: balancing initiator efficiency and dispersity

The optimisation of all components within Cu(0)-wire mediated polymerisation of styrene is illustrated yielding well-defined polystyrene with enhanced initiator efficiency and dispersity at higher molecular weights.

Photocatalyzed iron-based ATRP of methyl methacrylate using 1,3-dimethyl-2-imidazolidinone as both solvent and ligand

A simple photocatalyzed Fe-based ATRP of MMA was conducted under UV irradiation using the “green” solvent DMI as both the solvent and ligand.

The positive effect of water on photo-induced step transfer-addition & radical-termination (START) polymerization

In photo-induced Step Transfer-Addition & Radical-Termination (START) polymerization, the addition of water greatly enhanced the overall polymerization efficiency and inhibited the function loss (C–I).

Visible light-induced PET-RAFT polymerization of methacrylates with novel organic photocatalysts

PET-RAFT polymerization was successfully carried out under irradiation of various LED lights at room temperature by using two novel organic agents 4-methoxybenzaldehyde and 2,4,6-tri-(p-methoxyphenyl) pyrylium tetrafluoroborate for the first time.

Reversible Addition-Fragmentation Chain Transfer Polymerization of Acrylonitrile under Irradiation of Blue LED Light

Compared to unhealthy UV or γ-ray and high-energy-consumption thermal external stimuli, the promising light emitting diode (LED) external stimulus has some outstanding technological merits such as narrow wavelength distribution, low heat generation and energy consumption, and safety for human beings. In this work, a novel reversible addition-fragmentation transfer (RAFT) polymerization system for acrylonitrile (AN) was developed under the irradiation of blue LED light at room temperature, using 1,2,3,5-tetrakis(carbazol-9-yl)-4,6-dicyanobenzene (4CzIPN) as a novel radical initiator and 2-cyanoprop-2-yl-1-dithionaphthalate (CPDN) as the typical chain transfer agent. Well-defined polyacrylonitrile (PAN) with a controlled molecular weight and narrow molecular weight distribution was successfully synthesized. This strategy may provide another effective method for scientific researchers or the industrial community to synthesize a PAN-based precursor of carbon fibers.

One-Step Dipping Method for Covalently Grafting Polymer Films onto a Si Surface from Aqueous Media

A facile and one-pot dipping method was proposed in this article for the first time to prepare vinylic polymer films on a silicon (Si) surface. This novel process was conducted in acidic aqueous media containing 4-nitrobenzene diazonium (NBD) tetrafluoroborate, hydrofluoric acid (HF), and vinylic monomers at room temperature in the open air and without any apparatus requirement. The formation of the polyvinyl film was confirmed by corroborating evidence from ellipsometry, Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), and atomic force microscope (AFM) analysis. The results revealed that both polymers of poorly water soluble methyl methacrylate (MMA) and water-soluble acrylic acid (AA) monomers were covalently grafted onto the Si surface via this simple process. The polyvinyl film was composed of polynitrophenyl (PNP) and polyvinyl, where PNP was doped into polyvinyl chains throughout the entire film. From a mechanistic point of view, the simple dipping method took advantage of the ability of the NBD cation to be spontaneously reduced at the Si surface at open circuit potential, providing aryl radicals. These radicals can be covalently bonded to the Si surface to form the PNP primer layer. Although the PNP sublayer was thinner and difficult to detect, it was necessary to graft polyvinyl chains. Furthermore, the aryl radicals were used to initiate the polymerization of vinylic monomers. The radical-terminated polyvinyl chains formed in the solution were then added to the aromatic rings of the primer layer to form the expected polyvinyl film.

Iron-Mediated Homogeneous ICAR ATRP of Methyl Methacrylate under ppm Level Organometallic Catalyst Iron(III) Acetylacetonate

Atom Transfer Radical Polymerization (ATRP) is an important polymerization process in polymer synthesis. However, a typical ATRP system has some drawbacks. For example, it needs a large amount of transition metal catalyst, and it is difficult or expensive to remove the metal catalyst residue in products. In order to reduce the amount of catalyst and considering good biocompatibility and low toxicity of the iron catalyst, in this work, we developed a homogeneous polymerization system of initiators for continuous activator regeneration ATRP (ICAR ATRP) with just a ppm level of iron catalyst. Herein, we used oil-soluble iron (III) acetylacetonate (Fe(acac)₃) as the organometallic catalyst, 1,1'-azobis (cyclohexanecarbonitrile) (ACHN) with longer half-life period as the thermal initiator, ethyl 2-bromophenylacetate (EBPA) as the initiator, triphenylphosphine (PPh₃) as the ligand, toluene as the solvent and methyl methacrylate (MMA) as the model monomer. The factors related with the polymerization system, such as concentration of Fe(acac)₃ and ACHN and polymerization kinetics, were investigated in detail at 90 °C. It was found that a polymer with an acceptable molecular weight distribution (Mw/Mn = 1.43 at 45.9% of monomer conversion) could be obtained even with 1 ppm of Fe(acac)₃, making it needless to remove the residual metal in the resultant polymers, which makes such an ICAR ATRP process much more industrially attractive. The "living" features of this polymerization system were further confirmed by chain-extension experiment.

Reconstitution of bacteriorhodopsin with cationic poly(dimethylaminoethyl acrylate)-block-poly(methylacrylate) for bio-hybrid materials

A kind of cationic amphiphilic copolymer was synthesized for supporting membrane proteins to prepare bio-hybrid materials.

Polymerisation of 2-acrylamido-2-methylpropane sulfonic acid sodium salt (NaAMPS) and acryloyl phosphatidylcholine (APC) via aqueous Cu(0)-mediated radical polymerisation

The scope of aqueous Cu(0)-mediated living radical polymerisation has been expanded with the preparation of poly(2-acrylamido-2-methylpropane sulfonic acid)sodium salt (P(NaAMPS)) and poly(acryloyl phosphatidycholine) (PAPC).

Hollow silica bubble based immobilized trypsin for highly efficient proteome digestion and buoyant separation

Tryptic digestion before identification and quantification by mass spectrometry is an indispensable process for most proteomics studies.

Synthesis of amphiphilic nanoparticles and multi-block hydrophilic copolymers by a facile and effective “living” radical polymerization in water

A convenient and robust approach using MANDC-COOH as the initiator and oxidatively stable Cu(OAc)₂as the catalyst to synthesize amphiphilic nanoparticles and hydrophilic multi-block copolymers was successfully developed in water.

Folate-decorated hydrophilic three-arm star-block terpolymer as a novel nanovehicle for targeted co-delivery of doxorubicin and Bcl-2 siRNA in breast cancer therapy

To minimize the side effects and enhance the efficiency of chemotherapy, a novel folate-decorated hydrophilic cationic star-block terpolymer, [poly(l-glutamic acid γ-hydrazide)-b-poly(N,N-dimethylaminopropyl methacrylamide)]3-g-poly(ethylene glycol) ((PGAH-b-PDMAPMA)3-g-PEG), with disulfide linkages between the PEG and PDMAPMA blocks, was developed for targeted co-delivery of doxorubicin and Bcl-2 small interfering RNA (siRNA) into breast cancer cells. The terpolymer was synthesized by a combination of ring-opening polymerization, reversible addition-fragmentation chain transfer polymerization, PEGylation and hydrazinolysis. The chemical structures of the polymers were confirmed by (1)H-NMR analysis. The terpolymer could conjugate doxorubicin via an acid-labile hydrazone linkage and simultaneously efficiently complex siRNA through electrostatic interaction at N/P ratios of ⩾4:1 to form "two-in-one" nanomicelleplexes, which displayed a spherical shape and had an average size of 101.3 nm. The doxorubicin loading efficiency and content were 61.0 and 13.23%, respectively. The cytotoxicity, drug release profile, targeting ability, cellular uptake and intracellular distribution of the nanomicelleplexes were evaluated in vitro. We found that the release behaviors of doxorubicin and siRNA had a pH/reduction dual dependency. They were released faster under reductive acidic conditions (pH 5.0, glutathione: 10mM) than under physiological conditions (pH 7.4). The folate-decorated nanomicelleplexes could deliver doxorubicin and Bcl-2 siRNA more efficiently into the same MCF-7 cell and exhibited a higher cytotoxicity than non-targeted nanomicelleplexes. These results indicate that the terpolymer could act as an efficient vehicle for targeted intracellular co-delivery of doxorubicin and therapeutic siRNA in cancer therapy.

Iron-catalyzed atom transfer radical polymerization

This article reviews the preparation of polymers using iron-catalyzed atom transfer radical polymerization.

Surface PEGylation on PLA membranes via micro-swelling and crosslinking for improved biocompatibility/hemocompatibility

A feasible and efficient strategy was developed to enable persistent PEGylation on a PLA membrane surface via micro-swelling and subsequent UV-initiated crosslinking of poly(ethylene glycol) diacrylate.

Preparation of graphene/poly(2-hydroxyethyl acrylate) nanohybrid materials via an ambient temperature “grafting-from” strategy

PHEA polymer brushes were grownin situfrom the surface of graphene sheetsviaSET-LRP through a “grafting-from” strategy at ambient temperature to afford the PHEA/graphene hybrid material with excellent dispersibility in organic solvents.

Amide group-containing polar solvents as ligands for iron-catalyzed atom transfer radical polymerization of methyl methacrylate

Iron-catalyzed ATRP of MMA using polar solvents based on amide groups as ligands is reported.

Magnetic nanomaterials with near-infrared pH-activatable fluorescence via iron-catalyzed AGET ATRP for tumor acidic microenvironment imaging

This work provides a fluorescent/magnetic iron oxide nanomaterials prototype to visualize the solid tumor in vivo by sensing the tumor acidic microenvironment, and a satisfactory tumor-to-normal tissue signal ratio (T/N ratio) and a prolonged time-window for 4T1 tumor visualization were observed in vivo.

Fabrication of amphiphilic fluorescent polylysine nanoparticles by atom transfer radical polymerization (ATRP) and their application in cell imaging

A novel amphiphilic Flu-Ply fluorescent polymer was successfully fabricated by ATRP method with high potential applications for bioimaging.

Facile and universal photo-induced living radical polymerization system mediated by iniferter agent and copper(ii) acetate at ambient temperature

A facile and universal photo-induced living radical polymerization with a wide range of monomers was developed in the presence of iniferter agent MANDC and organic catalyst copper(ii) acetate under UV irradiation at ambient temperature.

AS1411 aptamer and folic acid functionalized pH-responsive ATRP fabricated pPEGMA-PCL-pPEGMA polymeric nanoparticles for targeted drug delivery in cancer therapy

Nonspecificity and cardiotoxicity are the primary limitations of current doxorubicin chemotherapy. To minimize side effects and to enhance bioavailability of doxorubicin to cancer cells, a dual-targeted pH-sensitive biocompatible polymeric nanosystem was designed and developed. An ATRP-based biodegradable triblock copolymer, poly(poly(ethylene glycol) methacrylate)-poly(caprolactone)-poly(poly(ethylene glycol) methacrylate) (pPEGMA-PCL-pPEGMA), conjugated with doxorubicin via an acid-labile hydrazone bond was synthesized and characterized. Dual targeting was achieved by attaching folic acid and the AS1411 aptamer through EDC-NHS coupling. Nanoparticles of the functionalized triblock copolymer were prepared using the nanoprecipitation method, resulting in an average particle size of ∼140 nm. The biocompatibility of the nanoparticles was evaluated using MTT cytotoxicity assays, blood compatibility studies, and protein adsorption studies. In vitro drug release studies showed a higher cumulative doxorubicin release at pH 5.0 (∼70%) compared to pH 7.4 (∼25%) owing to the presence of the acid-sensitive hydrazone linkage. Dual targeting with folate and the AS1411 aptamer increased the cancer-targeting efficiency of the nanoparticles, resulting in enhanced cellular uptake (10- and 100-fold increase in uptake compared to single-targeted NPs and non-targeted NPs, respectively) and a higher payload of doxorubicin in epithelial cancer cell lines (MCF-7 and PANC-1), with subsequent higher apoptosis, whereas a normal (noncancerous) cell line (L929) was spared from the adverse effects of doxorubicin. The results indicate that the dual-targeted pH-sensitive biocompatible polymeric nanosystem can act as a potential drug delivery vehicle against various epithelial cancers such as those of the breast, ovary, pancreas, lung, and others.

Bifunctional nanoparticles with magnetism and NIR fluorescence: controlled synthesis from combination of AGET ATRP and 'click' reaction

In this work, bifunctional nanoparticles (NPs) capable of emitting near infrared (NIR) fluorescence and generating superparamagnetism under an external magnetic field were prepared by combination of 'click' reaction and surface-initiated activators generated by electron transfer for atom transfer radical polymerization (AGET ATRP) of water-soluble poly(ethylene glycol) monomethyl ether methacrylate (PEGMA) and glycidyl methacrylate (GMA) using biocompatible iron as the catalyst on the surface of silica-coated iron oxide (Fe3O4@SiO2) NPs. The nanosized Fe3O4@SiO2@PPEGMA-co-PGMA@N3 was prepared through AGET ATRP and alkynyl bearing NIR dye was also prepared; afterwards they were integrated together by 'click' reaction. The different stages of surface modification were approved by employing different characterization techniques such as TEM, XRD, XPS, VSM and FT-IR, and the properties of the final NPs were thoroughly studied. Their suitability as dual model imaging agents for magnetic resonance (MR) and fluorescence imaging was investigated, indicating them to be a competitive candidate for imaging contrast agents.

Rhodamine based pH-sensitive “intelligent” polymers as lysosome targeting probes and their imaging applications in vivo

Two rhodamine-based polymers were prepared via free radical polymerization and could serve as lysosome targeting probes with good pH sensitivity. Fluorescence imaging of nude mice displayed a chance for visualization of cancerous tissue in vivo by sensing its acidic microenvironments.