PDMAEMA from α to ω chain ends: tools for elucidating the structure of poly(2-(dimethylamino)ethyl methacrylate)

An in-depth characterization of PDMAEMA prepared by ATRP was conducted, with a focus on end group analysis. This work discusses analytical tools providing essential information about the extent of control over DMAEMA polymerization and chain extension.

Application of vinyl polymer-based materials as nucleic acids carriers in cancer therapy

Nucleic acid-based therapies have changed the paradigm of cancer treatment, where conventional treatment modalities still have several limitations in terms of efficacy and severe side effects. However, these biomolecules have a short half-life in vivo, requiring multiple administrations, resulting in severe suffering, discomfort, and poor patient compliance. In the early days of (nano)biotechnology, these problems caused concern in the medical community, but recently it has been recognized that these challenges can be overcome by developing innovative formulations. This review focuses on the use of vinyl polymer-based materials for the protection and delivery of nucleic acids in cancer. First, an overview of the properties of nucleic acids and their versatility as drugs is provided. Then, key information on the achievements to date, the most effective delivery methods, and the evaluation of functionalization approaches (stimulatory strategies) are critically discussed to highlight the importance of vinyl polymers in the new cancer treatment approaches. This article is categorized under: Nanotechnology Approaches to Biology > Nanoscale Systems in Biology Therapeutic Approaches and Drug Discovery > Nanomedicine for Oncologic Disease Biology-Inspired Nanomaterials > Nucleic Acid-Based Structures.

Amino acid-derived ABCBA-type antifouling biohybrid with multi-stimuli responsivity and contaminant removal capability

A multi-stimuli (pH/thermo/redox)-responsive amphiphilic poly(cysteine methacrylamide)-block-poly(N,N-dimethylaminoethyl methacrylate)-block-polybutadiene-block-poly(N,N-dimethylaminoethyl methacrylate)-block-poly(cysteine methacrylamide) (PCysMAM-b-PDMAEMA-b-PB-b-PDMAEMA-b-PCysMAM) pentablock copolymer biohybrids, based on hydrophobic PB, ampholytic redox responsive PCysMAM and dual (pH and temperature) stimuli responsive PDMAEMA segments,...

Polymer-based Non-viral Vectors for Gene Therapy in the Skin

Gene therapy has emerged as a versatile technique with the potential to treat a range of human diseases; however, examples of the topical application of gene therapy as a treatment...

An organotypic model of high-grade serous ovarian cancer to test the anti-metastatic potential of ROR2 targeted Polyion complex nanoparticles

High-grade serous ovarian cancer (HGSOC) is the most lethal gynaecological malignancy. Most patients are diagnosed at late stages when the tumour has metastasised throughout the peritoneal cavity. The Wnt receptor ROR2 has been identified as a promising therapeutic target in HGSOC, with limited targeting therapeutic options currently available. Small interfering RNA (siRNA)-based therapeutics hold great potential for inhibiting the function of specific biomarkers, however major challenges remain in efficient delivery and stability. The aim of this study was to investigate the ability of nanoparticles to deliver ROR2 siRNA into HGSOC cells, including platinum resistant models, and estimate the anti-metastatic effect via a 3D organotypic model for ovarian cancer. The nanoparticles were generated by conjugating poly[2-(dimethylamino) ethyl methacrylate] (PDMAEMA) of various chain length to bovine serum albumin (BSA), followed by the condensation of ROR2 siRNA into polyplexes, also termed polyion complex (PIC) nanoparticles. The toxicity and uptake of ROR2 siRNA PIC nanoparticles in two HGSOC cell lines, CaOV3 as well as its cisplatin resistant pair (CaOV3CisR), in addition to primary cells used for the 3D organotypic model were investigated. ROR2 knockdown at both transcriptional and translational levels were evaluated via real-time PCR and western blot analysis, respectively. Following 24 h incubation with the nanoparticles, functional assays were performed including proliferation (IncuCyte S3), transwell migration and 3D co-cultured transwell invasion assays. The PICs nanoparticles exhibited negligible toxicity in the paired CaOV3 cell lines or primary cells. Treating CaOV3 and CaOV3CisR cells with ROR2 siRNA containing PICs nanoparticles significantly inhibited migration and invasion ability. The biocompatible ROR2 siRNA conjugated PICs nanoparticles provide an innovative therapeutic option. ROR2 targeting therapy shows potential in treating HGSOC including platinum resistant forms.

Chimeric liposomes incorporating functional copolymers: preparation and pH/thermo-responsive behaviour in aqueous solutions

The purpose of this study is to prepare stimuli-responsive chimeric liposomes (i.e. hybrid polymer-lipid liposomes) containing functional copolymers and conduct aqueous solution studies in order to determine their properties and potential as drug-delivery nanocarriers. Two random copolymers, composed of the hydrophilic, pH and thermo-responsive 2-(dimethyl amino) ethyl methacrylate (DMAEMA) monomer and the hydrophobic stearyl methacrylate (SMA) monomer, were synthesized via free-radical polymerization and molecularly characterized using SEC, FTIR, and 1H-NMR. The synthesis was followed by aqueous solution studies, utilising dynamic light scattering (DLS) in order to determine their stimuli responsive self-assembly properties. The preparation of chimeric liposomes was mediated by thin film deposition and hydration, followed by aqueous solution studies via DLS, ζ-potential and fluorescence spectroscopy. The drug-loading studies include curcumin loading via a thin film deposition and hydration technique, while aqueous solution properties of the drug-loaded chimeric liposomes were determined utilizing DLS, and UV-Vis spectroscopy.

Development of Environmentally Friendly Atom Transfer Radical Polymerization

Atom transfer radical polymerization (ATRP) is one of the most successful techniques for the preparation of well-defined polymers with controllable molecular weights, narrow molecular weight distributions, specific macromolecular architectures, and precisely designed functionalities. ATRP usually involves transition-metal complex as catalyst. As the most commonly used copper complex catalyst is usually biologically toxic and environmentally unsafe, considerable interest has been focused on iron complex, enzyme, and metal-free catalysts owing to their low toxicity, inexpensive cost, commercial availability and environmental friendliness. This review aims to provide a comprehensive understanding of iron catalyst used in normal, reverse, AGET, ICAR, GAMA, and SARA ATRP, enzyme as well as metal-free catalyst mediated ATRP in the point of view of catalytic activity, initiation efficiency, and polymerization controllability. The principle of ATRP and the development of iron ligand are briefly discussed. The recent development of enzyme-mediated ATRP, the latest research progress on metal-free ATRP, and the application of metal-free ATRP in interdisciplinary areas are highlighted in sections. The prospects and challenges of these three ATRP techniques are also described in the review.

Pushing the limits of robust and eco-friendly ATRP processes: untreated water as the solvent

ATRP can be performed in untreated water without addition of halide salts, with no deleterious effect on the polymerization control.

Preparation of well-defined brush-like block copolymers for gene delivery applications under biorelevant reaction conditions

Well-defined oligo(ethylene glycol) methyl ether methacrylate (OEOMA) based block copolymers with cationic segments composed by N,N-(dimethylamino) ethyl methacrylate (DMAEMA) and/or 2-(diisopropylamino) ethyl methacrylate (DPA) were developed under biorelevant reaction conditions. These brush-type copolymers were synthesized through supplemental activator and reducing agent (SARA) atom transfer radical polymerization (ATRP) using sodium dithionite as SARA agent. The synthesis was carried out using an eco-friendly solvent mixture, very low copper catalyst concentration, and mild reaction conditions. The structure of the block copolymers was characterized by size exclusion chromatography (SEC) analysis and ¹H nuclear magnetic resonance (NMR) spectroscopy. The pH-dependent protonation of these copolymers enables the efficient complexation with plasmid DNA (pDNA), yielding polyplexes with sizes ranging from 200 up to 700 nm, depending on the molecular weight of the copolymers, composition and concentration used. Agarose gel electrophoresis confirmed the successful pDNA encapsulation. No cytotoxicity effect was observed, even for N/P ratios higher than 50, for human fibroblasts and cervical cancer cell lines cells. The in vitro cellular uptake experiments demonstrated that the pDNA-loaded block copolymers were efficiently delivered into nucleus of cervical cancer cells. The polymerization approach, the unique structure of the block copolymers and the efficient DNA encapsulation presented can open new avenues for development of efficient tailor made gene delivery systems under biorelevant conditions.

Externally controlled atom transfer radical polymerization

ATRP can be externally controlled by electrical current, light, mechanical forces and various chemical reducing agents. The mechanistic aspects and preparation of polymers with complex functional architectures and their applications are critically reviewed.

In Vivo Anti-Biofilm and Anti-Bacterial Non-Leachable Coating Thermally Polymerized on Cylindrical Catheter

Catheters are indispensable tools of modern medicine, but catheter-associated infection is a significant clinical problem, even when stringent sterile protocols are observed. When the bacteria colonize catheter surfaces, they tend to form biofilms making them hard to treat with conventional antibiotics. Hence, there is a great need for inherently antifouling and antibacterial catheters that prevent bacterial colonization. This paper reports the preparation of nonleachable antibiofilm and antibacterial cationic film coatings directly polymerized from actual tubular silicone catheter surfaces via the technique of supplemental activator and reducing agent surface-initiated atom-transfer radical polymerization (SARA SI-ATRP). Three cross-linked cationic coatings containing (3-acrylamidopropyl) trimethylammonium chloride (AMPTMA) or quaternized polyethylenimine methacrylate (Q-PEI-MA) together with a cross-linker (polyethylene glycol dimethacrylate, PEGDMA) were tested. The in vivo antibacterial and antibiofilm effect of these nonleachable covalently linked coatings (using a mouse catheter model) can be tuned to achieve 1.95 log (98.88%) reduction and 1.26 log (94.51%) reduction of clinically relevant pathogenic bacteria (specifically with methicillin-resistant Staphylococcus aureus (MRSA) and vancomycin-resistant Enterococcus faecalis (VRE)). Our good in vivo bactericidal killing results using the murine catheter-associated urinary tract infection (CAUTI) model show that SARA SI-ATRP grafting-from technique is a viable technique for making nonleachable antibiofilm coating even on "small" (0.30/0.64 mm inner/outer diameter) catheter.

High transfection efficiency promoted by tailor-made cationic tri-block copolymer-based nanoparticles

Cationic polymer-based vectors have been considered a promising strategy in gene therapy area due to their inherent ability to condense genetic material and successfully transfect cells. However, they usually exhibit high cytotoxicity. In this work, it is proposed the use of a tailor-made gene carrier based on a tri-block copolymer of poly[2-(dimethylamino)ethyl methacrylate] and poly(β-amino ester) (PDMAEMA-b-PβAE-b-PDMAEMA), the influence of the PβAE length being assessed. For this purpose, three different block copolymers were prepared varying the molecular weight of this segment. The obtained materials were characterized by NMR and SEC analyzes. Different polyplexes formulations were prepared and evaluated in terms of physicochemical characterization (ethidium bromide intercalation assay, agarose gel electrophoresis assay, dynamic light scattering, zeta potential analyzes and atomic force microscopy) and biological activity (cytotoxicity, and luciferase and green fluorescent protein expression in Hela and COS-7 cell lines). Among the developed nanosystems, the best polyplex formulation revealed between 40- and 60-fold higher transgene expression, in HeLa and COS-7 cell lines, and much lower cytotoxicity than that observed with branched PEI and TurboFect™. Moreover, these nanosystems present suitable physicochemical properties for gene delivery namely reduced mean diameter and high DNA protection. The results reported here show the enormous potential of this block copolymer as gene carrier.

STATEMENT OF SIGNIFICANCE

Syntheses of PDMAEMA-b-PβAE-b-PDMAEMA block copolymers for an extremely effective non-viral vector. The block copolymer PDMAEMA₃₀₀₀-b-PβAE₁₂₀₀₀-b-PDMAEMA₃₀₀₀-based polyplexes at 100/1N/P ratio exhibits between 40- and 60-fold higher transgene expression in HeLa and COS-7 cell lines than commonly used polymeric non-viral vectors, namely branched PEI (known as the gold standard) and TurboFect™ (commercial available).

PGMA-based gene carriers with lipid molecules

Lipids, as the greatest constituent in cell membranes, have been widely used for biomedical applications because of their excellent biological properties. The introduction of membrane lipid molecules into gene vectors would embody greater biocompatibility, cellular uptake and transfection efficiency. In this work, one flexible strategy for readily conjugating lipid molecules with polycations was proposed based on atom transfer radical polymerization to produce a series of cholesterol (CHO)- and phosphatidylinositol (PI)-terminated ethanolamine-functionalized poly(glycidyl methacrylate)s, namely CHO-PGEAs and PI-PGEAs, as effective gene carriers. CHO-PGEAs and PI-PGEAs truly demonstrated much better transfection performances compared to linear ethanolamine-functionalized poly(glycidyl methacrylate) (denoted as BUCT-PGEA) counterparts and traditional standard branched polythylenimine (PEI, 25 kDa). In addition, the good antitumor effects of CHO-PGEA and PI-PGEA were confirmed with suppressor tumor gene p53 systems in vitro and in vivo. The present work could provide a new strategy to develop effective cationic conjugation of lipid molecules for gene therapy.

Cyclopentyl methyl ether as a green solvent for reversible-addition fragmentation chain transfer and nitroxide-mediated polymerizations

Cyclopentyl methyl ether (CPME) was successfully used as an environmentally friendly alternative to regularly employed organic solvents (e.g., THF, DMSO, DCM and DMF) for the RAFT and NMP polymerizations of vinyl chloride (VC) and styrene (S).

Getting faster: low temperature copper-mediated SARA ATRP of methacrylates, acrylates, styrene and vinyl chloride in polar media using sulfolane/water mixtures

Supplemental activator and reducing agent atom transfer radical polymerization (SARA ATRP) of acrylates, methacrylates, styrene and vinyl chloride was successfully performed in sulfolane/water mixtures using ppm amounts of soluble copper.

An ATRP-based approach towards water-borne anisotropic polymer–Gibbsite nanocomposites

This paper describes the synthesis of anisotropic polymer–Gibbsite nanocomposites with “muffin-like” morphology via a starved-feed ATRP emulsion polymerisation.

Recent Progress on Transition Metal Catalyst Separation and Recycling in ATRP

Atom transfer radical polymerization (ATRP) is a versatile and robust tool to synthesize a wide spectrum of monomers with various designable structures. However, it usually needs large amounts of transition metal as the catalyst to mediate the equilibrium between the dormant and propagating species. Unfortunately, the catalyst residue may contaminate or color the resultant polymers, which limits its application, especially in biomedical and electronic materials. How to efficiently and economically remove or reduce the catalyst residue from its products is a challenging and encouraging task. Herein, recent advances in catalyst separation and recycling are highlighted with a focus on (1) highly active ppm level transition metal or metal free catalyzed ATRP; (2) post-purification method; (3) various soluble, insoluble, immobilized/soluble, and reversible supported catalyst systems; and (4) liquid-liquid biphasic catalyzed systems, especially thermo-regulated catalysis systems.

Facile synthesis of well-controlled poly(glycidyl methacrylate) and its block copolymers via SARA ATRP at room temperature

The detailed synthesis of poly(glycidyl methacrylate) (PGMA) by atom transfer radical polymerization (ATRP) using a catalytic system of Fe(0)/Cu(ii)Br₂ at room temperature is reported.

Sulfolane: an Efficient and Universal Solvent for Copper-Mediated Atom Transfer Radical (co)Polymerization of Acrylates, Methacrylates, Styrene, and Vinyl Chloride

A very fast and controlled atom transfer radical (co)polymerization (ATRP) of acrylates, methacrylates, styrene, and vinyl chloride is reported in a single dipolar aprotic solvent, sulfolane, with the use of ppm amount of the copper catalyst. The observed rates of polymerization (k_p^app) of the monomers studied are similar to those reported using dimethyl sulfoxide (DMSO) and other polar solvents typically employed in single electron transfer (SET)-mediated atom transfer radical polymerization (ATRP) processes. As proof-of-concept, ABA type block copolymers of polystyrene-b-poly(vinyl chloride)-b-polystyrene and poly(methyl acrylate)-b-poly(vinyl chloride)-b-poly(methyl acrylate) were prepared for the first time using a reversible deactivation radical polymerization (RDRP) method in a single solvent. The quantitative preservation of halide chain-ends was confirmed by ¹H NMR and MALDI-TOF analysis as well as by the complete shift of the GPC traces. The results presented establish an innovative and robust system to afford a vast portfolio of (co)polymers in a single widely used industrial solvent.

Synergistic Effect of 1-Butyl-3-methylimidazolium Hexafluorophosphate and DMSO in the SARA ATRP at Room Temperature Affording Very Fast Reactions and Polymers with Very Low Dispersity

An unusual synergistic effect between 1-butyl-3-methylimidazolium hexafluorophosphate (BMIM-PF6) and dimethyl sulfoxide (DMSO) mixtures is reported for the supplemental activator and reducing agent atom transfer radical polymerization (SARA ATRP) of methyl acrylate (MA) using a catalytic system composed by sodium dithionate (Na2S2O4) and CuBr2/Me6TREN (Me6TREN: tris[2-(dimethylamino)ethyl]amine) at room temperature. To the best of our knowledge, the use of ionic liquids (IL) has never been reported for the SARA ATRP. The kinetic data obtained for a broad range of target molecular weights revealed very fast polymerization rates, low dispersity values (Đ < 1.05) and well-defined chain-end functionalities.

Macromolecular engineering by atom transfer radical polymerization

This Perspective presents recent advances in macromolecular engineering enabled by ATRP. They include the fundamental mechanistic and synthetic features of ATRP with emphasis on various catalytic/initiation systems that use parts-per-million concentrations of Cu catalysts and can be run in environmentally friendly media, e.g., water. The roles of the major components of ATRP--monomers, initiators, catalysts, and various additives--are explained, and their reactivity and structure are correlated. The effects of media and external stimuli on polymerization rates and control are presented. Some examples of precisely controlled elements of macromolecular architecture, such as chain uniformity, composition, topology, and functionality, are discussed. Syntheses of polymers with complex architecture, various hybrids, and bioconjugates are illustrated. Examples of current and forthcoming applications of ATRP are covered. Future challenges and perspectives for macromolecular engineering by ATRP are discussed.

Synthesis of cationic poly((3-acrylamidopropyl)trimethylammonium chloride) by SARA ATRP in ecofriendly solvent mixtures

Successful supplemental activator and reducing agent atom transfer radical polymerization of (3-acrylamidopropyl)trimethylammonium chloride under ecofriendly conditions.