Ternary Electrical Memory Devices Based on Polycarbazole: SnO2 Nanoparticles Composite Material

In this paper, a D–A polymer (PIB) containing carbazole as the donor group in the main chain and benzimidazole benzisoindolinone as the acceptor group was synthesized by Suzuki reaction. The Suzuki reaction, also known as the Suzuki coupling reaction, is a relatively new organic coupling reaction in which aryl or alkenyl boronic acids or boronic acid esters react with chlorine, bromine, iodoaromatic hydrocarbons or alkenes under the catalysis of zerovalent palladium complexes cross-coupling. A series of devices were fabricated by a spin-coating approach, and the devices all exhibited ternary resistance switching storage behavior. Among them, the composite device with the mass fraction of SnO₂ NPs of 5 wt% has the best storage performance, with a threshold voltage of −0.4 V and a switching current ratio of 1:10^1.5:10^4.5. At the same time, the current of the device remained stable after a 3-h test. Furthermore, after 10³ cycles, the current has no obvious attenuation. The device has good stability and continuity. Moreover, the conduction mechanism is further revealed. Inorganic nanoparticle composite devices have splendid memory performances and exhibit underlying application significance in storing data.

Highly electrochemically and thermally stable donor–π–acceptor triphenylamine-based hole-transporting homopolymers via oxidative polymerization

Polymers combining high electrochemical and thermal stability, good solubility, high Tg and high coke residue with low-lying HOMO levels and reasonable hole mobilities in thin films are reported in this study.

Synthesis, characterization and electrochromic properties of novel redox triarylamine-based aromatic polyethers with methoxy protecting groups

Two series of novel redox aromatic polyethers were synthesized successfully from disilyl ether-containing triphenylamine-based monomers and they display one to three stage electrochromism with interesting and multi-coloured changes.

Optically Isotropic, Colorless, and Flexible PITEs/TiO2 and ZrO2 Hybrid Films with Tunable Refractive Index, Abbe Number, and Memory Properties

A series of novel polyimidothioethers (PITEs) and the respective polymer hybrids of titania or zirconia with fantastic thermal stability and optical properties have been successfully prepared. These colorless PITEs with high transparency were synthesized by Michael polyaddition from commercially available dithiol and bismaleimides monomers. The PITE with sulfide and hydroxyl groups (S-OH) and the corresponding hybrid films declare ultra-lowest birefringence value of 0.002 and tunable refractive index (1.65–1.81 for S-OH/titania and 1.65–1.80 for S-OH/zirconia), implying large potential to the optical applications in the future. Moreover, the S-OH/zirconia hybrid films exhibit higher Abbe’s number and optical transparency than those of S-OH/titania system because larger energy band gap of ZrO₂. Furthermore, by adding titania and zirconia as electron acceptor into S-OH system, the charge transfer complex can be facilitated and stabilized caused by the lower LUMO energy level of hybrid materials. Consequently, the devices of memory prepared from these polymer films of hybrid showed interesting and adjustable memory behavior from DRAM, SRAM, to WORM at various titania or zirconia contents with a large ON/OFF ratio (10⁸), denoting that the memory devices derived from these highly transparent novel S-OH/TiO₂ and S-OH/ZrO₂ hybrid films are attractive for the electrical applications.

Redox-State Dependent Spectroscopic Properties of Porous Organic Polymers Containing Furan, Thiophene, and Selenophene

A series of electroactive triarylamine porous organic polymers (POPs) with furan, thiophene, and selenophene (POP-O, POP-S, and POP-Se) linkers have been synthesised and their electronic and spectroscopic properties investigated as a function of redox state. Solid state NMR provided insight into the structural features of the POPs, while in situ solid state Vis-NIR and electron paramagnetic resonance spectroelectrochemistry showed that the distinct redox states in POP-S could be reversibly accessed. The development of redox-active porous organic polymers with heterocyclic linkers affords their potential application as stimuli responsive materials in gas storage, catalysis, and as electrochromic materials.

Main chain copolysiloxanes with terthiophene and perylenediimide units: synthesis, characterization and electrical memory

A main chain donor–acceptor copolysiloxane PBIClSi-alt-PTSi for resistor type memory has been designed and synthesized. The PBIClSi-alt-PTSi possesses high thermal stability and shows nonvolatile write-once-read many times (WORM) memory characteristics.

Highly transparent and flexible bio-based polyimide/TiO2 and ZrO2 hybrid films with tunable refractive index, Abbe number, and memory properties

The novel bio-based polyimide (4ATA-PI) and the corresponding PI hybrids of TiO2 or ZrO2 with excellent optical properties and thermal stability have been prepared successfully. The highly transparent 4ATA-PI containing carboxylic acid groups in the backbone could provide reaction sites for organic-inorganic bonding to obtain homogeneous hybrid films. These PI hybrid films showed a tunable refractive index (1.60-1.81 for 4ATA-PI/TiO2 and 1.60-1.80 for 4ATA-PI/ZrO2), and the 4ATA-PI/ZrO2 hybrid films revealed a higher optical transparency and Abbe's number than those of the 4ATA-PI/TiO2 system due to a larger band gap of ZrO2. By introducing TiO2 and ZrO2 as the electron acceptor into the 4ATA-PI system, the hybrid materials have a lower LUMO energy level which could facilitate and stabilize the charge transfer complex. Therefore, memory devices derived from these PI hybrid films exhibited tunable memory properties from DRAM, SRAM, to WORM with a different TiO2 or ZrO2 content from 0 wt% to 50 wt% with a high ON/OFF ratio (10(8)). In addition, the different energy levels of TiO2 and ZrO2 revealed specifically unique memory characteristics, implying the potential application of the prepared 4ATA-PI/TiO2 and 4ATA-PI/ZrO2 hybrid films in highly transparent memory devices.

Linkage and donor–acceptor effects on resistive switching memory devices of 4-(N-carbazolyl)triphenylamine-based polymers

In order to gain deeper insight about the linkage effect and donor–acceptor effect on memory behavior (from DRAM to WORM), 4-(N-carbazolyl)triphenylamine-based polyimides and polyamides were synthesized and their memory behaviours were investigated.

Zinc and linkage effects of novel porphyrin-containing polyimides on resistor memory behaviors

The retention time of resistor type memory devices could be tuned by the linkage groups between porphyrin moiety and DSDA on the PIs. Moreover, the metal zinc also plays an important role in further tuning the memory behavior.

Electrochemically fabricated electrochromic films from 4-(N-carbazolyl)triphenylamine and its dimethoxy derivative

4-(N-Carbazolyl)triphenylamine (TPACz) and its methoxy derivative MeOTPACz could be facilely fabricated into redox-active and electrochromic PTPACz polymer and (MeOTPACz)2 dimer films via electrochemical polymerization.

Side-chain and linkage-mediated effects of anthraquinone moieties on ambipolar poly(triphenylamine)-based volatile polymeric memory devices

Two ambipolar and thermally stable poly(triphenylamine)s with pendent anthraquinone acceptors were readily synthesized and prepared for the investigation of side-chain and linkage-mediated effects on the memory behaviour.