Recent Advances on Furan-Based Visible Light Photoinitiators of Polymerization

Photopolymerization is an active research field enabling to polymerize in greener conditions than that performed with traditional thermal polymerization. At present, a great deal of effort is devoted to developing visible light photoinitiating systems. Indeed, the traditional UV photoinitiating systems are currently the focus of numerous safety concerns so alternatives to UV light are being actively researched. However, visible light photons are less energetic than UV photons so the reactivity of the photoinitiating systems should be improved to address this issue. In this field, furane constitutes an interesting candidate for the design of photocatalysts of polymerization due to its low cost and its easy chemical modification. In this review, an overview concerning the design of furane-based photoinitiators is provided. Comparisons with reference systems are also established to demonstrate evidence of the interest of these photoinitiators in innovative structures.

Recent Advances in 3D Printing of Photocurable Polymers: Types, Mechanism, and Tissue Engineering Application

The conversion of liquid resin into solid structures upon exposure to light of a specific wavelength is known as photopolymerization. In recent years, photopolymerization-based 3D printing has gained enormous attention for constructing complex tissue-specific constructs. Due to the economic and environmental benefits of the biopolymers employed, photo-curable 3D printing is considered an alternative method for replacing damaged tissues. However, the lack of suitable bio-based photopolymers, their characterization, effective crosslinking strategies, and optimal printing conditions are hindering the extensive application of 3D printed materials in the global market. This review highlights the present status of various photopolymers, their synthesis, and their optimization parameters for biomedical applications. Moreover, a glimpse of various photopolymerization techniques currently employed for 3D printing is also discussed. Furthermore, various naturally derived nanomaterials reinforced polymerization and their influence on printability and shape fidelity are also reviewed. Finally, the ultimate use of those photopolymerized hydrogel scaffolds in tissue engineering is also discussed. Taken together, it is believed that photopolymerized 3D printing has a great future, whereas conventional 3D printing requires considerable sophistication, and this review can provide readers with a comprehensive approach to developing light-mediated 3D printing for tissue-engineering applications.

Stereochemistry-Controlled Mechanical Properties and Degradation in 3D-Printable Photosets

Stereochemistry provides an appealing handle by which to control the properties of small molecules and polymers. While it is established that stereochemistry in linear polymers affects their bulk mechanical properties, the application of this concept to photocurable networks could allow for resins that can accommodate the increasing demand for mechanically diverse materials without the need to significantly change their formulation. Herein, we exploit cis and trans stereochemistry in pre-resin oligomers to create photoset materials with mechanical properties and degradation rates that are controlled by their stereochemistry and molecular weight. Both the synthesis of stereopure (cis or trans) acrylate-terminated pre-polymers and the subsequent UV-triggered cross-linking occurred with a retention of stereochemistry, close to 100%. The stereochemistry of a 4 kDa oligomer within the resin enabled the tuning of the formulation to either a fast eroding, soft cis elastomer or a stiff trans plastic that is more resistant to degradation. These results demonstrate that stereochemistry is a powerful tool to modify the stiffness, toughness, and degradability of high-resolution, three-dimensional printed scaffolds from the same formulated ratio of components.

Naphthyl-Naphthalimides as High-Performance Visible Light Photoinitiators for 3D Printing and Photocomposites Synthesis

In this article, five new organic dyes based on the naphthalimide scaffold (Napht-1–Napht-5) were synthesized and tested as high-performance photoinitiators for both the Free Radical Photopolymerization (FRP) of acrylates and the Cationic Polymerization (CP) of epoxides using blue Light-Emitting Diodes (LEDs) as a safe irradiation source (LED @405 nm and 455). In fact, very good photopolymerization profiles (high final conversions and high polymerization rates) were obtained once these photoinitiators were combined with an Iodonium salt (Iod) or Iod/amine NPG and NVK). Remarkably, these dyes were able to generate interpenetrating polymer networks (IPN) by polymerization of a blend of monomers. These experiments were carried out to improve the polymerization profiles as well as the mechanical properties of the obtained materials. Due to their high photoinitiation abilities, these compounds were used in some applications such as photocomposite synthesis, direct laser write, and 3D printing experiments. To determine the chemical mechanisms, the photochemical/photophysical properties of these compounds were studied using different characterization techniques such as UV–visible absorption spectroscopy, steady-state photolysis, Fluorescence quenching, time-resolved fluorescence spectroscopy, FTIR spectroscopy, and cyclic voltammetry

Recent Advances in bis-Chalcone-Based Photoinitiators of Polymerization: From Mechanistic Investigations to Applications

Over the past several decades, photopolymerization has become an active research field, and the ongoing efforts to develop new photoinitiating systems are supported by the different applications in which this polymerization technique is involved-including dentistry, 3D and 4D printing, adhesives, and laser writing. In the search for new structures, bis-chalcones that combine two chalcones' moieties within a unique structure were determined as being promising photosensitizers to initiate both the free-radical polymerization of acrylates and the cationic polymerization of epoxides. In this review, an overview of the different bis-chalcones reported to date is provided. Parallel to the mechanistic investigations aiming at elucidating the polymerization mechanisms, bis-chalcones-based photoinitiating systems were used for different applications, which are detailed in this review.

3D printing of functional microrobots

3D printing (also called "additive manufacturing" or "rapid prototyping") is able to translate computer-aided and designed virtual 3D models into 3D tangible constructs/objects through a layer-by-layer deposition approach. Since its introduction, 3D printing has aroused enormous interest among researchers and engineers to understand the fabrication process and composition-structure-property correlation of printed 3D objects and unleash its great potential for application in a variety of industrial sectors. Because of its unique technological advantages, 3D printing can definitely benefit the field of microrobotics and advance the design and development of functional microrobots in a customized manner. This review aims to present a generic overview of 3D printing for functional microrobots. The most applicable 3D printing techniques, with a focus on laser-based printing, are introduced for the 3D microfabrication of microrobots. 3D-printable materials for fabricating microrobots are reviewed in detail, including photopolymers, photo-crosslinkable hydrogels, and cell-laden hydrogels. The representative applications of 3D-printed microrobots with rational designs heretofore give evidence of how these printed microrobots are being exploited in the medical, environmental, and other relevant fields. A future outlook on the 3D printing of microrobots is also provided.

Purpurin derivatives as visible-light photosensitizers for 3D printing and valuable biological applications

Synthesis of new visible-light absorbing purpurin derivatives as promising photosensitizers for 3D photoprinting and anti-adhesion properties.

Substituent Effects on Photoinitiation Ability of Monoaminoanthraquinone-Based Photoinitiating Systems for Free Radical Photopolymerization under LEDs

Three monoamino-substituted anthraquinone derivatives (AAQs), that is, 1-aminoanthraquinone (AAQ), 1-(methylamino)anthraquinone (MAAQ), and 1-(benzamido)anthraquinone (BAAQ), incorporated with various additives [e.g., triethanolamine (TEAOH) and phenacyl bromide (PhC(═O)CH₂ Br)] are investigated for their roles as photoinitiating systems of free radical photopolymerization of (meth)acrylate monomers upon the exposure to UV to green LEDs. The AAQs-based photoinitiating systems, AAQ/TEAOH/PhC(═O)CH₂ Br and BAAQ/TEAOH/PhC(═O)CH₂ Br photoinitiators exhibit the highest efficiency for the free radical photopolymerization of DPGDA under the irradiation of blue LED and UV LED, respectively, which is consistent with the extent of overlap between their absorption spectra and the emission spectra of the LEDs. AAQ/TEAOH/PhC(═O)CH₂ Br photoinitiator can also initiate the free radical photopolymerization of different (meth)acrylate monomers, with an efficiency dependent on the chemical structures of these monomers.

Oxidation-Induced Differentially Selective Turn-On Fluorescence via Photoinduced Electron Transfer Based on a Ferrocene-Appended Coumarin-Quinoline Platform: Application in Cascaded Molecular Logic

Differentially selective molecular sensors that exhibit differential response toward multiple analytes are cost-effective and in high demand for various practical applications. A novel, highly differentially selective electrochemical and fluorescent chemosensor, 5, based on a ferrocene-appended coumarin-quinoline platform has been designed and synthesized. Our designed probe is very specific toward Fe³⁺ via a reversible redox process, whereas it detects Cu²⁺ via irreversible oxidation. Interestingly, it exhibits differential affinity toward the Cu⁺ ion via complexation. High-resolution mass spectrometry, ¹H NMR titration, and IR spectral studies revealed the formation of a bidentate Cu⁺ complex involving an O atom of the amide group attached to the quinoline ring and a N atom of imine unit, and this observation was further supported by quantum-chemical calculations. The metal binding responses were further investigated by UV-vis, fluorescence spectroscopy, and electrochemical analysis. Upon the addition of Fe³⁺ and Cu²⁺ ions, the fluorescence emission of probe 5 shows a "turn-on" signal due to inhibition of the photoinduced electron transfer (PET) process from a donor ferrocene unit to an excited-state fluorophore. The addition of sodium l-ascorbate (LAS) as a reducing agent causes fluorescence "turn off" for the Fe³⁺ ion because of reemergence of the PET process but not for the Cu²⁺ ion because it oxidizes the ferrocene unit to a ferrocenium ion with its concomitant reduction to Cu⁺, which further complexes with 5. Thermodynamic calculations using the Weller equation along with density functional theory calculations validate the feasibility of the PET process. A unique combination of Fe³⁺, LAS, and Cu²⁺ ions has been used to produce a molecular system demonstrating combinational "AND-OR" logic operation.

Design of Iodonium Salts for UV or Near-UV LEDs for Photoacid Generator and Polymerization Purposes

Iodonium salts are well established photoacid generators, cationic photoinitiators, as well as additives commonly used in photoredox catalytic cycles. However, as a strong limitation, iodonium salts are characterized by low light absorption properties for λ > 300 nm so that these latter cannot be activated with cheap, safe, and eco-friendly near UV or even visible light emitting diodes (LEDs). To overcome this drawback, the covalent linkage of an iodonium salt to a chromophore absorbing at longer wavelength is actively researched. With aim at red-shifting the absorption spectrum of the iodonium salt, the synthesis of new compounds combining within a unique chemical structure both the chromophore (here the naphthalimide scaffold) and the iodonium salt is presented. By mean of this strategy, a polymerization could be initiated at 365 nm with the modified iodonium salts whereas no polymerization could be induced with the benchmark iodonium salt i.e., Speedcure 938 at this specific wavelength. To examine the effect of the counter-anion on the photoinitiating ability of these different salts, five different counter-anions were used. Comparison between the different anions revealed the bis(trifluoromethane)sulfonimide salt to exhibit the best photoinitiating ability in both the free radical polymerization of acrylates and the cationic polymerization of epoxides. To support the experimental results, molecular orbital calculations have been carried out. By theoretical calculations, the initiating species resulting from the photocleavage of the iodonium salts could be determined. The cleavage selectivity and the photochemical reactivity of the new iodoniums are also discussed.

New 1,8-Naphthalimide Derivatives as Photoinitiators for Free-Radical Polymerization Upon Visible Light

Photopolymerization processes, and especially those carried out under visible light, are more and more widespread for their multiple advantages compared to thermal processes. In the present paper, new 1,8-naphthalimide derivatives are proposed as photoinitiators for free-radical polymerization upon visible light exposure using light-emitting diodes (LEDs) at 395, 405, and 470 nm. These photoinitiators are used in combination with both iodonium salts and phosphine. The synthesis of these compounds as well as their excellent polymerization initiation ability for methacrylate monomers are presented in this article. A full picture of the involved chemical mechanisms is also provided thanks to photolysis, radical characterization, and redox measurements.

Silicone-Thioxanthone: A Multifunctionalized Visible Light Photoinitiator with an Ability to Modify the Cured Polymers

A silicone-thioxanthone (STX) visible light photoinitiator was prepared by the nucleophilic substitution reaction of 2-[(4-hydroxybenzyl)-(methyl)-amino]-9H-thioxanthen-9-one (TX-HB) and γ-chloropropylmethylpolysiloxane-co-dimethyl-polysiloxane (PSO-Cl). Its structure was confirmed by ¹H NMR, ¹³C NMR, FTIR, UV-vis and GPC. The photopolymerization kinetics of 1, 6-Hexanedioldiacrylate (HDDA) and trimethylolpropane triacrylate (TMPTA) initiated by STX confirmed that STX is an efficient photoinitiator. Its visible light photolysis experiment and the photopolymerization kinetics studies implied that a possible synergistic effect existed between two adjacent thioxanthone groups. Moreover, a higher migration stability was revealed in STX than 2-benzyl (methyl) amino-9H-thioxanthen-9-one (TX-B). STX could change the surface property of the cured film of polyurethane diacrylate prepolymer (PUA) from hydrophilic to hydrophobic, as well as change the thermal stability of the polymer network. Meanwhile, it could improve the resistance against water and acid. Thus, STX is an effective multifunctionalized photoinitiator.

Amphiphilic polymer coated nanodiamonds: a promising platform to deliver azonafide

An amphiphilic polymer is grafted on nanodiamonds to improve the colloidal stability and to deliver an anticancer drug azonafide.

Photoinitiators in Dentistry: Challenges and Advances

Photopolymerization is used in a wide range of clinical applications in dentistry and the demand for dental materials that can restore form, function and esthetics is increasing rapidly. Simultaneous with this demand is the growing need for photoinitiators that provide effective and efficient in situ polymerization of dental materials using visible light irradiation. This chapter reviews the fundamentals of Type I and II photoinitiators. The advantages and disadvantages of these photoinitiators will be considered with a particular focus on parameters that affect the polymerization process in the oral cavity. The chapter examines recent developments in photoinitiators and opportunities for future research in the design and development of photoinitiators for dental applications. Future research directions that employ computational models in conjunction with iterative synthesis and experimental methods will also be explored in this chapter.

3D printing of photopolymers

Recent progress in the photoinitiators and monomers/oligomers of photopolymers for 3D printing is presented in the review.