In Situ Fabrication of Silver Nanoparticle-Decorated Polymeric Vesicles for Antibacterial Applications

Silver/polymeric vesicle composite nanoparticles with good antibacterial properties were fabricated in this study. Silver nanoparticles (AgNPs) were prepared in situ on cross-linked vesicle membranes through the reduction of silver nitrate (AgNO3) using polyvinylpyrrolidone (PVP) via coordination bonding between the Ag+ ions and the nitrogen atoms on the vesicles. X-ray diffraction (XRD), ultraviolet-visible spectroscopy (UV-vis), and transmission electron microscopy (TEM) analyses confirmed the formation of AgNPs on the vesicles. The antibacterial test demonstrated good antibacterial activity against both Gram-negative bacteria (Escherichia coli) and Gram-positive bacteria (Staphylococcus aureus) for the produced AgNP-decorated vesicles. The minimum inhibitory concentration (MIC) values of the AgNP-decorated vesicles for E. coli and S. aureus were 8.4 and 9.6 μg/mL, respectively. Cell viability analysis on the A549 cells indicated that the toxicity was low when the AgNP concentrations did not exceed the MIC values, and the wound healing test confirmed the good antibacterial properties of the AgNP-decorated vesicles.

Hybrid Polymer Vesicles: Controllable Preparation and Potential Applications

Hybrid polymer vesicles contain functional nanoparticles (NPs) in their walls, interfaces, coronae, or cavities. NPs render the hybrid vesicles with specific physical properties, while polymers endow them with structural stability and may significantly reduce the high toxicity of NPs. Therefore, hybrid vesicles integrate fascinating multifunctions from both NPs and polymeric vesicles, which have gained tremendous attention because of their diverse promising applications. Various types of delicate hybrid polymeric vesicles with size control and tunable localization of NPs in different parts of vesicles have been constructed via in situ and ex situ strategies, respectively. Their potential applications have been widely explored, as well. This review presents the progress of block copolymer (BCP) vesicle systems containing different types of NPs including metal NPs, magnetic NPs, and semiconducting quantum dots (QDs), etc. The strategies for controlling the location of NPs within hybrid vesicles are discussed. Typical potential applications of the elegant hybrid vesicles are also highlighted.

Antibacterial and Antifungal Properties of Polyester, Polylactide, and Cotton Nonwovens and Fabrics, by Means of Stable Aqueous Dispersions Containing Copper Silicate and Some Metal Oxides

Literature reviews have described the applications of silver, copper, and zinc ions and metallic particles of Cu, Ti, and Zn oxides, which have been found to be useful antimicrobial reagents for the biofunctionalization of various materials and their surfaces. For this purpose, compositions of water dispersions containing emulsions of synthetic copolymers based on acrylic and vinyl monomers, polysaccharides (hydroxyethyl cellulose and starch), and various additives with wetting and stabilizing properties were used. Many stable water dispersions of different chemical compositions containing bioactive chemical compounds (copper silicate hydrate, titanium dioxide, and zinc oxide (and other auxiliary substances)) were developed. They were used for the preparation of thin hybrid coatings having good antimicrobial properties against Gram-negative bacteria (Escherichia coli), Gram-positive bacteria (Staphylococcus aureus), and yeast fungus (Candida albicans). Polyester (PES) and polylactide (PLA) nonwovens were modified using the dip-coating method, while PES and cotton fabrics were biofunctionalized by means of dip-coating and coating methods. The antimicrobial (antibacterial and antifungal) properties of the textile materials (nonwovens and fabrics) biofunctionalized with the above-mentioned bioactive agents exhibiting antimicrobial properties (CuSiO3, TiO2, ZnO, or ZnO∙SiO2) were strongly dependent on the agents' content in the water dispersions. The PES and PLA nonwovens, modified on the surface with water compositions containing copper silicate hydrate, showed good antibacterial properties against the Gram-negative bacteria Escherichia coli, even at a content of 1 wt.% CuSiO3∙xH2O, and against the Gram-positive bacteria Staphylococcus aureus, at the content of at least 5 wt.% CuSiO3∙xH2O. The bacterial growth reduction factor (R) was greater than 99% for most of the samples tested. Good antifungal properties against the fungus Candida albicans were found for the PES and PLA nonwoven fabrics modified with dispersions containing 5-7 wt.% CuSiO3∙xH2O and 4.2-5.0 wt.% TiO2. The addition of TiO2 led to a significant improvement in the antifungal properties of the PES and PLA nonwovens modified in this way. For the samples of PES WIFP-270 and FS F-5 nonwovens, modified with water dispersions containing 5.0 wt.% CuSiO3∙xH2O and 4.2-5.0 wt.% TiO2, the growth reduction factor for the fungus Candida albicans (R) reached values in the range of 80.9-98.0%. These new biofunctionalized polymeric nonwoven textile materials can find practical applications in the manufacture of filters for hospital air-conditioning systems and for the automotive industry, as well as in air purification devices. Moreover, similar antimicrobial modification of fabrics with the dip-coating or coating methods can be applied, for example, in the fabrication of fungi- and mold-resistant garden furniture.

Pyrolized Diatomaceous Biomass Doped with Epitaxially Growing Hybrid Ag/TiO2 Nanoparticles: Synthesis, Characterisation and Antibacterial Application

In the pursuit of innovative solutions for modern technologies, particularly in the design and production of new micro/nanostructured materials, microorganisms acting as "natural microtechnologists" can serve as a valuable source of inspiration. This research focuses on harnessing the capabilities of unicellular algae (diatoms) to synthesize hybrid composites composed of AgNPs/TiO₂NPs/pyrolyzed diatomaceous biomass (AgNPs/TiO₂NPs/DBP). The composites were consistently fabricated through metabolic (biosynthesis) doping of diatom cells with titanium, pyrolysis of the doped diatomaceous biomass, and chemical doping of the pyrolyzed biomass with silver. To characterize the synthesized composites, their elemental and mineral composition, structure, morphology, and photoluminescent properties were analysed using techniques such as X-ray diffraction, scanning and transmission electron microscopy, and fluorescence spectroscopy. The study revealed the epitaxial growth of Ag/TiO₂ nanoparticles on the surface of pyrolyzed diatom cells. The antimicrobial potential of the synthesized composites was evaluated using the minimum inhibitory concentration (MIC) method against prevalent drug-resistant microorganisms, including Staphylococcus aureus, Klebsiella pneumonia, and Escherichia coli, both from laboratory cultures and clinical isolates.

Dual-emissive ratiometric fluorescent nanosensor based on multi-nanomaterials for Ag+ determination in lake water

In this study, a sensitive ratiometric fluorescent nanosensor was constructed using a facile one-pot method by encapsulating carbon dots (CDs) and cadmium telluride quantum dots (CdTe QDs) into the pore cavities of a metal-organic framework (ZIF-8). In this nanosensor (CD/CdTe QD@ZIF-8), the fluorescence attributed to CdTe QDs was quenched by silver ions (Ag⁺), and the fluorescence intensity of CDs did not change. The introduction of ZIF-8 into the system can not only adsorb Ag⁺ but also easily separate CDs and CdTe QDs from the matrix. The developed CD/CdTe QD@ZIF-8 composite used as a ratiometric fluorescent probe exhibited high sensitivity and selectivity towards Ag⁺. The working linear range was 0.1-20 μM with a limit of detection (LOD) of 1.49 nM. Finally, the proposed nanosensor was applied to determine Ag⁺ in lake water with satisfactory results.

Intelligent design of polymersomes for antibacterial and anticancer applications

Polymersomes (or polymer vesicles) have attracted much attention for biomedical applications in recent years because their lumen can be used for drug delivery and their coronas and membrane can be modified with a variety of functional groups. Thus, polymersomes are very suitable for improved antibacterial and anticancer therapy. This review mainly highlighted recent advances in the synthetic protocols and design principles of intelligent antibacterial and anticancer polymersomes. Antibacterial polymersomes are divided into three categories: polymersomes as antibiotic nanocarriers, intrinsically antibacterial polymersomes, and antibacterial polymersomes with supplementary means including photothermal and photodynamic therapy. Similarly, the anticancer polymersomes are divided into two categories: polymersomes-based delivery systems and anticancer polymersomes with supplementary means. In addition, the bilateral relationship between bacteria and cancer is addressed, since more and more evidences show that bacteria may cause cancer or promote cancer progression. Finally, prospective on next-generation antibacterial and anticancer polymersomes are discussed. This article is categorized under: Therapeutic Approaches and Drug Discovery > Nanomedicine for Infectious Disease Therapeutic Approaches and Drug Discovery > Nanomedicine for Oncologic Disease Biology-Inspired Nanomaterials > Lipid-Based Structures.

Polymer Vesicles for Antimicrobial Applications

Polymer vesicles, hollow nanostructures with hydrophilic cavity and hydrophobic membrane, have shown significant potentials in biomedical applications including drug delivery, gene therapy, cancer theranostics, and so forth, due to their unique cell membrane-like structure. Incorporation with antibacterial active components like antimicrobial peptides, etc., polymer vesicles exhibited enhanced antimicrobial activity, extended circulation time, and reduced cell toxicity. Furthermore, antibacterial, and anticancer can be achieved simultaneously, opening a new avenue of the antimicrobial applications of polymer vesicles. This review seeks to highlight the state-of-the-art of antimicrobial polymer vesicles, including the design strategies and potential applications in the field of antibacterial. The structural features of polymer vesicles, preparation methods, and the combination principles with antimicrobial active components, as well as the advantages of antimicrobial polymer vesicles, will be discussed. Then, the diverse applications of antimicrobial polymer vesicles such as wide spectrum antibacterial, anti-biofilm, wound healing, and tissue engineering associated with their structure features are presented. Finally, future perspectives of polymer vesicles in the field of antibacterial is also proposed.

Plasmonic carriers responsive to pulsed laser irradiation: a review of mechanisms, design, and applications

This review focuses on interactions which govern release from plasmonic carrier systems including liposomes, polymersomes, and nanodroplets under pulsed irradiation.

Factors affecting the morphology of some organic and inorganic nanostructures for drug delivery: characterization, modifications, and toxicological perspectives

Introduction: In this review, we aim to highlight the impact of various processes and formulation variables influencing the characteristics of certain surfactant-based nanoconstructs for drug delivery. Areas covered: The review includes the discussion on processing parameters for the preparation of nanoconstructs, especially those made up of surfactants. Articles published in last 15 years (437) were reviewed, 381 articles were selected for data review and most appropriate articles (215) were included in article. Effect of variables such as surfactant concentration and type, membrane additives, temperature, and pH-dependent transitions on morphology has been highlighted along with effect of shape on nanoparticle uptake by cells. Various characterization techniques explored for these nanostructures with respect to size, morphology, lamellarity, distribution, etc., and a separate section on polymeric vesicles and the influence of block copolymers, type of block copolymer, control of block length, interaction of multiple block copolymers on the structure of polymersomes and chimeric nanostructures have been discussed. Finally, applications, modification, degradation, and toxicological aspects of these drug delivery systems have been highlighted. Expert opinion: Parameters influencing the morphology of micelles and vesicles can directly or indirectly affect the efficacy of small molecule cellular internalization as well as uptake in the case of biologicals.[Figure: see text].

Gold nanorods with surface charge-switchable activities for enhanced photothermal killing of bacteria and eradication of biofilm

The gold nanorods (PCB-AuNRs) with pH induced surface charge transform activities were used for photothermal disinfection of planktonic bacteria and eradication of bacterial biofilms.

Silver nanoparticles with pH induced surface charge switchable properties for antibacterial and antibiofilm applications

Silver nanoparticles with pH induced surface charge transform activities were prepared which showed an enhanced antibacterial and antibiofilm efficiency while demonstrated reduced cytotoxicity to mammalian cells.

Bioengineering of Functional Nanosilver Nanogels for Smart Healthcare Systems

Functional designing of nanogels has become an attractive domain of biomedical engineering to develop bioactive materials with innovative features for the human healthcare system. Nanosilver has attracted enormous attention due to its wide antimicrobial spectrum and ability to kill almost all types of bacteria in its vicinity. However, the most crucial challenge for bioscientists is the lack of binding ability of nanosilver with the material surfaces that allow nanosilver to leach out to the surrounding tissue and exert toxicity while the biomaterial is in contact with the living system. Designing nanosilver within a nanogel confinement offers enormous possibilities to develop functional bioactive nanoparticles that may be bonded to any biomaterial surface via the nanogel functionality. This approach requires the proper combination of material science with nanotechnology and biotechnology to innovate interesting domain of functional nanogels with unique features. This work aims at providing a critical review on the current progress, approaches, and vision in designing nanosilver-entrapped nanogel particles with diverse functionality, and their bioactivity against microorganisms for human healthcare devices.

Antibacterial Melamine Foams Decorated with in Situ Synthesized Silver Nanoparticles

A new and straightforward single-step route to decorate melamine foams with silver nanoparticles (ME/Ag) is proposed. Uniform coatings of silver nanoparticles with diameters less than 10 nm are formed in situ directly on the struts surface of the foams, after their dipping in an AgNO₃ solution. We prove that the nanoparticles are stably adhered on the foams, and that their amount can be directly controlled by the concentration of the AgNO₃ solution and the dipping time. Following this production route, ME/Ag foams can be obtained with silver content ranging between 0.2 and 18.6 wt % and excellent antibacterial performance, making them appropriate for various applications. Herein we explore the possibility to use them as antibacterial filters for water treatment, proving that they are able to remove completely Escherichia coli bacteria from water when filtered at flow rates up to 100 mL/h·cm² due to the release of less than 1 ppm of Ag⁺ ions by the foams. No bacterial regrowth was observed after further dilution of the treated water, to arrive below the safety threshold of Ag⁺ for drinking water (0.1 ppm), demonstrating the excellent bactericide performance of the ME/Ag filters.

Silver-Decorated Polymeric Micelles Combined with Curcumin for Enhanced Antibacterial Activity

Because of the mounting prevalence of complicated infections induced by multidrug-resistant bacteria, it is imperative to develop innovative and efficient antibacterial agents. In this work, we design a novel polymeric micelle for simultaneous decorating of silver nanoparticles and encapsulating of curcumin as a combination strategy to improve the antibacterial efficiency. In the constructed combination system, silver nanoparticles were decorated in the micellar shell because of the in situ reduction of silver ions, which were absorbed by the poly(aspartic acid) (PAsp) chains in the shell. Meanwhile, natural curcumin was encapsulated into the poly(ε-caprolactone) (PCL) core of the micelle through hydrophobic interaction. This strategy could prevent aggregation of silver nanoparticles and improve the water solubility of curcumin at the same time, which showed enhanced antibacterial activity toward Gram-negative P.aeruginosa and Gram-positive S.aureus compared with sliver-decorated micelle and curcumin-loaded micelle alone, due to the cooperative antibacterial effects of the silver nanoparticles and curcumin. Furthermore, the achieved combinational micelles had good biocompatibility and low hemolytic activity. Thus, our study provides a new pathway in the rational design of combination strategy for efficiently preventing the ubiquitous bacterial infections.

Phosphonium-Functionalized Polymer Micelles with Intrinsic Antibacterial Activity

New approaches to treat bacterial infections are badly needed to address the increasing problem of antibiotic resistance. This study explores phosphonium-functionalized block copolymer micelles as intrinsically antibacterial polymer assemblies. Phosphonium cations with varying alkyl lengths were conjugated to the terminus of a poly(ethylene oxide)-polycaprolactone block copolymer, and the phosphonium-functionalized block copolymers were self-assembled to form micelles in aqueous solution. The size, morphology, and ζ-potential of the assemblies were studied, and their abilities to kill Escherichia coli and Staphylococcus aureus were evaluated. It was found that the minimum bactericidal concentration depended on the phosphonium alkyl chain length, and different trends were observed for Gram-negative and Gram-positive bacteria. The most active assemblies exhibited no hemolysis of red blood cells above the bactericidal concentrations, indicating that they can selectively disrupt the membranes of bacteria. Furthermore, it was possible to encapsulate and release the antibiotic tetracycline using the assemblies, providing a potential multimechanistic approach to bacterial killing.

Copper and silver nanoparticles stabilized by bistriazole-based dendritic amphiphile micelles for 4-nitrophenol reduction

Copper and silver nanoparticles stabilized on dendritic amphiphiles catalyzed 4-nitrophenol reduction at the ppm level, with particle size influencing catalytic efficiency.

Visualization of silver-decorated poly (DL-lactide-co-glycolide) nanoparticles and their efficacy against Staphylococcus epidermidis

Understanding of self-protection activity of the bacteria and interaction with drug substances has significant importance for designing of effective drug delivery system for treatment of biofilm infections. Recently silver nanoparticle has attracted attention as antibacterial substance for drug delivery system because of its high antibacterial activity. Here, efflux of silver nanoparticles obtained from within the prepared silver-decorated poly (DL-lactide-co-glycolide) (Ag PLGA) nanoparticles derived from Staphylococcus epidermidis bacterial cell was successfully visualized using scanning transmission electron microscopy (STEM). We also revealed the interaction between prepared Ag PLGA nanoparticles and the bacterial cells at the nanoscale level using field emission scanning electron microscopy and STEM, after a pretreatment process by an ionic liquid. This finding is significant to understand a fundamental function of S. epidermidis bacterial cells, which is not explored previously. The results suggest that Ag PLGA nanoparticles could demonstrate high efficacy against biofilm infections.

Rationally Separating the Corona and Membrane Functions of Polymer Vesicles for Enhanced T₂ MRI and Drug Delivery

It is an important challenge to in situ grow ultrafine super-paramagnetic iron oxide nanoparticles (SPIONs) in drug carriers such as polymer vesicles (also called polymersomes) while keeping their biodegradability for enhanced T2-weighted magnetic resonance imaging (MRI) and drug delivery. Herein, we present a new strategy by rationally separating the corona and membrane functions of polymer vesicles to solve the above problem. We designed a poly(ethylene oxide)-block-poly(ε-caprolactone)-block-poly(acrylic acid) (PEO43-b-PCL98-b-PAA25) triblock copolymer and self-assembled it into polymer vesicle. The PAA chains in the vesicle coronas are responsible for the in situ nanoprecipitation of ultrafine SPIONs, while the vesicle membrane composed of PCL is biodegradable. The SPIONs-decorated vesicle is water-dispersible, biocompatible, and slightly cytotoxic to normal human cells. Dynamic light scattering, transmission electron microscopy, energy disperse spectroscopy, and vibrating sample magnetometer revealed the formation of ultrafine super-paramagnetic Fe3O4 nanoparticles (1.9 ± 0.3 nm) in the coronas of polymer vesicles. Furthermore, the CCK-8 assay revealed low cytotoxicity of vesicles against normal L02 liver cells without and with Fe3O4 nanoparticles. The in vitro and in vivo MRI experiments confirmed the enhanced T2-weighted MRI sensitivity and excellent metastasis in mice. The loading and release experiments of an anticancer drug, doxorubicin hydrochloride (DOX·HCl), indicated that the Fe3O4-decorated magnetic vesicles have potential applications as a nanocarrier for anticancer drug delivery. Moreover, the polymer vesicle is degradable in the presence of enzyme such as Pseudomonas lipases, and the ultrafine Fe3O4 nanoparticles in the vesicle coronas are confirmed to be degradable under weakly acidic conditions. Overall, this decoration-in-vesicle-coronas strategy provides us with a new insight for preparing water-dispersible ultrafine super-paramagnetic Fe3O4 nanoparticles with promising theranostic applications in biomedicine.

Construction of stable polymeric vesicles based on azobenzene and beta-cyclodextrin grafted poly(glycerol methacrylate)s for potential applications in colon-specific drug delivery

Stable polymeric vesicles constructed from cyclodextrin- and azobenzene-grafted poly(glycerol methacrylate)s exhibited potential applications in colon-specific drug delivery.

Preparation of polymersomes in pure water for facile antibacterial applications

We report the facile synthesis of antibacterial polymersomes in pure water, which show good antibacterial activities against both Gram-positive and Gram-negative bacteria and can be sprayed in places which are susceptible to bacterial attack.

CO2-switchable drug release from magneto-polymeric nanohybrids

A CO₂-responsive well-defined magneto-polymeric drug delivery system has been developed. A dosage release of doxorubicin (DOX) in vitro in a time-controllable manner can be easily executed with alternate CO₂/N₂ treatment by these smart nanocarriers.

Composite copolymer hybrid silver nanoparticles: preparation and characterization of antibacterial activity and cytotoxicity

The AgNPs could adhere to the bacterial membrane through electrostatic force, then damage the bacterial membrane irreversibly and lead to bacterial apoptosis finally.

Silkworm cocoons by cylinders self-assembled from H-shaped alternating polymer brushes

We report a novel silkworm cocoon-like nanostructure based on the 3D hierarchical self-assembly of cylinders which are spontaneously formed by an H-shaped polymer brush comprising a disulfide-bridged spacer and two brushes with alternating PEG and PCL side chains. Crystalline of PCL between adjacent cylinders bridges cylinders.

Reduction of 4-nitrophenol catalyzed by silver nanoparticles supported on polymer micelles and vesicles

We report the reduction of 4-nitrophenol catalyzed by silver nanoparticles supported on polymer micelles and vesicles which can significantly improve the stability, dispersibility and catalytic activity of silver nanoparticles even at one ppm.

Antibacterial polymeric nanostructures for biomedical applications

A topical review on recent advances in the research and applications of antimicrobial polymeric nanostructures, such as silver-decorated polymeric nanostructures, and polymeric micelles and vesicles based on antimicrobial polymers and antimicrobial peptides.

Mussel-inspired polydopamine coating as a versatile platform for synthesizing polystyrene/Ag nanocomposite particles with enhanced antibacterial activities

A mussel-inspired polydopamine coating-assisted electroless Ag metallization procedure was presented to prepare PS/Ag nanocomposite particles with enhanced antibacterial activities.

Decoration of homopolymer vesicles by antibacterial ultrafine silver nanoparticles

Silver nanoparticles have been successfully decorated on the poly(2-(2-ethoxyethoxy)ethyl acrylate) (PEEA) homopolymer vesicles, exhibiting good antibacterial activity against both Gram-positive and Gram-negative bacteria.

Effective oxidation protection of polymer micelles for copper nanoparticles in water

Copper nanoparticles are often susceptible to rapid oxidation in water. We report a water-dispersible and long-term stable copper nanoparticle protected by a block copolymer micelle that can effectively inhibit the access of oxygen to the copper inside its hydrophobic core, providing a sufficient diffusion barrier against oxidation in water.