2-O-Methylated β-Cyclodextrin as an Effective Building Block to Construct Supramolecular Assemblies with Various Morphologies and Molecular Arrangements

The preparation of supramolecular cyclodextrin (CD) assemblies and control of their assembly mode through guest inclusion in CD cavities have been actively studied. Contrarily, there are limited reports on the control of the assembly mode of guest-free CD molecules by external stimuli. Herein, we report the use of 2-O-methylated β-cyclodextrin (2-Me-β-CD) as an effective building block in fabricating supramolecular assemblies with diverse morphologies and molecular arrangements through assembly mode control by various stimuli, such as temperature and solvent. When methanol and diethyl carbonate were used as good and poor solvents, respectively, 2-Me-β-CD formed an amorphous assembly through solvent evaporation on a polyethylene terephthalate (PET) substrate. Increasing the drying temperature and using crystalline substrates, such as highly oriented pyrolytic graphite (HOPG) and sapphire, changed the assembly mode of 2-Me-β-CD to a head-to-tail channel assembly. However, when a 2-Me-β-CD/1-propanol solution was mixed with linear alkanes as a poor solvent, 2-Me-β-CD with head-to-head channel assembly was formed as a precipitate. Additionally, when the corresponding cyclic alkane was used as an alternative poor solvent, an organogel composed of 2-Me-β-CD with head-to-head channel assemblies was obtained. The organogel obtained became a precipitate composed of 2-Me-β-CD with cage-type assembly upon heating at 50 °C. Among the supramolecular assemblies fabricated in this study, the head-to-tail channel assembly is a rare molecular assembly of β-CD and its derivatives. It possesses a modified columnar cavity that has potential applications in molecular recognition and sensing.

Highly Regulated Supramolecular Assembly of 2-O-Methylated α-Cyclodextrin to Construct Vertically Oriented Microrods on Graphite

Precisely controlling self-assembled molecules to fabricate highly ordered nano/microstructures is a challenging task. Here, a simple precipitation technique with common solvents forms supramolecular microstructures with highly regulated molecular arrangements from a methylated derivative of α-cyclodextrin at the 2-O position (2-Me-α-CD). The formation of a head-to-tail channel assembly of 2-Me-α-CD through host-guest complexation with a solvent molecule such as benzene or cyclohexane yields well-defined hexagonal microrods. Specifically, the self-assembly of 2-Me-α-CD forms vertically aligned hexagonal microrods on a highly ordered pyrolytic graphite (HOPG) surface via epitaxial growth. This work should provide insight into the design of supramolecular building blocks for controlled self-assembly.

Advanced Li-S Batteries Enabled by a Biomimetic Polysulfide-Engulfing Net

Lithium-sulfur batteries are attractive because of their high specific capacity and energy density, but issues with the polysulfide dissolution and shuttling intrinsically hinder their wide application. Here, hydroxylate multiwalled carbon nanotubes (MWCNT-OH) were grafted with a supramolecular polymer (heptakis(6-amino-6-deoxy)-β-cyclodextrin) to form a polysulfide-engulfing net, which was coated on a separator. Such a molecular microarray structure of a polymer can block the polysulfides and have biomimetic cellular behavior for engulfing polysulfides. The cavity (∼6 Å) and functional groups of the supramolecular polymer can provide a dynamic structure for reversible adsorption of polysulfides while the conductive MWCNT-OH ensure fast electron transfer. The batteries with the modified separator exhibited excellent rate capacities (945.5 and 625.4 mA h g^-1 at 2 C and 4 C rates, respectively). Especially, the high areal capacities of 5.86 and 7.2 mA h cm^-2 achieved at S loadings of 4.5 and 6.0 mg cm^-2 and good cycling stability after 200 cycles at 0.1 C can be obtained. This demonstrates a strategy of supramolecular polymer-grafted carbon for dynamic polysulfide adsorption toward advanced Li-S batteries.

Supramolecular organogel formation through three-dimensional α-cyclodextrin nanostructures: solvent chirality-selective organogel formation

Novel supramolecular organogels were efficiently formed by mixing a 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP) solution of α-cyclodextrin (α-CD) with 1- or 2-butanol via the formation of three-dimensional hexagonal nanostructures composed of head-to-tail α-CD channel assemblies. Mixing (R)- and (S)-2-butanol with an α-CD/HFIP solution realized (S)-2-butanol-selective organogel formation.

pH-Responsive Dipeptide-Based Dynamic Covalent Chemistry Systems Whose Products and Self-Assemblies Depend on the Structure of Isomeric Aromatic Dialdehydes

Facile control over preparation of organic building blocks and self-assembled aggregations to construct the desired materials remains challenges. This article reports selective dynamic covalent bonds formation and the corresponding self-assembly behaviors by using a dipeptide, glycylglycine (GlyGly), reacting with isomeric aromatic dialdehydes o-phthalaldehyde (OPA), p-phthalaldehyde (PPA), and m-phthalaldehyde (MPA) to demonstrate diversified aggregation forms caused by structure topology variations. Under alkaline condition, the aldehyde groups of phthalaldehydes can be connected with the amino groups of GlyGly by imine bonds as the dynamic chemical bonds. Owing to the fact that formation and dissociation of the imine bonds were reversibly pH-responsive, the reactions and aggregates assembled by their products were also reversibly controlled by changing pH. Three products, including two-armed product (OPGG, in which two GlyGly molecules were connected with one OPA molecule), single-armed product (PPG, in which only one GlyGly molecule was connected with a PPA molecule), and a mixture product (MPGG and MPG), as well as their different self-assembly behaviors, were obtained from OPA/GlyGly, PPA/GlyGly, and MPA/GlyGly systems, respectively, at the same condition of pH 8.6 in 90% methanol aqueous solution. However, for OPA/GlyGly system, another different type of product with benzopyrrole structure (OPG) was obtained by nucleophilic substitution via mixing OPA and GlyGly in water, which generated organic nanoparticles. Based on the results above, we conjectured the differences in dynamic covalent bond formation and supramolecular assembly clearly were influenced by the structure topologies of phthalaldehydes (OPA, PPA, and MPA). The experimental phenomenon verified the hypothesis as well, which may guide us to realize facile construction of selective reaction products and intelligent reversibly responsive materials with diverse morphologies and functions.

Facile Stimuli-Responsive Transformation of Vesicle to Nanofiber to Supramolecular Gel via ω-Amino Acid-Based Dynamic Covalent Chemistry

This paper reports an interesting type of self-assembly systems based on dynamic covalent bonds. The systems are pH-responsible and reversible, which could be utilized for controlling the morphology transformation of the assemblies. In alkaline conditions, the amine group of 11-aminoundecanoic acid (AUA) can connect with the aldehyde group of benzaldehyde (BA) or 1-naphthaledhyde (NA) by dynamic covalent bond to form a small organic building block accompanied by the morphological transformation from vesicles to fibers. When pH is lowered to a neutral value, the dynamic covalent bonds (imine bonds) can be hydrolyzed, leading to the dissociation of fibers and appearance of spherical aggregates. The transformation was confirmed reversible as fibers appeared again when the pH was changed back to alkaline value. In addition, a reversibly controlled gel was designed based on the nanofiber formation. NaCl, which is capable of greatly enhance the nanofiber density and cross-linking, was used to induce the growth of free-standing gel from free-flowing nanofiber system, and the resultant gel was proven to be pH-reversible.

Superstructure Formation and Topological Evolution Achieved by Self-Organization of a Highly Adaptive Dynamer

The adaptive property of supramolecular building blocks facilitates noncovalent synthesis of soft materials. While it is still a challenging task, fine-tuning and precise control over topological nanostructures constructed from the self-assembly of low-molecular-weight building blocks are an important research direction to investigate the structure-property relationship. Herein, we report controlled self-assembly evolution of a low-molecular-weight building block bearing cholesterol and naphthalene-dicarboximide moieties, showing ultrasensitivity to solvent polarity. In low-polarity solvents (<4), it could form an M-type fiber-constituted organogel (supergel) with high solvent content, columnar molecular packing, and self-healing property. Highly polar solvents (>7.8) favor the formation of P-type helical nanostructures terminated by nanotoroids, having lamellar molecular packing. With a further increase in solvent polarity (up to 9.6), unilamellar and multilamellar vesicles were generated, which could undergo an aggregation-induced fusion process to form branched nanotubes tuned by the concentration. Self-attractive interactions between aggregates were found to be responsible for the formation of superstructures including helix-nanotoroid junctions as well as membrane-fused nanotubes.

Solvent-polarity-tuned nanostructures assembled from modified octadecylcarbamate with an anthracen moiety

A-9-YMOC tends to form nanofibers whereas it self-assembles in polar solvents and nanoflowers in nonpolar solvents with different molecular arrangements.

Tuning of gel morphology with supramolecular chirality amplification using a solvent strategy based on an Fmoc-amino acid building block

The self-assembly of an aromatic amino acid affords diverse aggregates from flat nanofibers to twist nanofibers with tunable supramolecular chirality.

An easy approach for constructing vesicles by using aromatic molecules with β-cyclodextrin

Vesicles were formed in aqueous solution using β-cyclodextrin (β-CD) complexes with a series of ultra-small aromatic molecules. The vesicles are easy to prepare without a complicated synthesis procedure and their structure was identified and characterized using various techniques, including transmission electron microscopy, atomic force microscopy and dynamic laser light scattering. Using the β-CD/l-phenylalanine system as a representative example, the structural factors that caused the self-assembly were revealed using proton nuclear magnetic resonance, Fourier transform infrared spectroscopy and X-ray diffraction. In addition, the vesicular architecture could be endowed with a diverse range of stimuli-responses, as a consequence of the selective addition of various guest molecules. It is anticipated that this novel assembly strategy could be further extended, and that it presents new opportunities for the development of nanocarriers and soft materials.

1,1,1,3,3,3-Hexafluoro-2-propanol (HFIP) as a novel and effective solvent to facilely prepare cyclodextrin-assembled materials

HFIP solutions of CDs act as a powerful tool to facilely prepare CD-assembled materials.

Self-assembly of folic acid/melamine complexes with hierarchy levels: from membranes to porous spherulites and networks

Utilizing the self-assembly of folic acid/melamine complexes in water, we realized the construction of spherulites and networks with porous structure from membrane growth and folding.