Surface Modification of an Absorbable Bimodal Fe-Mn-Ag Alloy by Nitrogen Plasma Immersion Ion Implantation

Recently, Fe-Mn-based alloys have been increasingly catching the attention of the scientific community, because of their tunable and outstanding mechanical properties, and suitable degradation behavior for biomedical applications. In spite of these assets, their corrosion rate (CR) is, in general, too low to satisfy the requirements that need to be met for cardiovascular device applications, such as stents. In fact, the CR is not always the same for all of the degradation stages of the material, and in addition, a finely tuned release rate, especially during the first steps of the corrosion pattern, is often demanded. In this work, a resorbable bimodal multi-phase alloy Fe-3Mn-1Ag was designed by mechanical alloying and spark plasma sintering (SPS) to accelerate the corrosion rate. The presence of several phases, for example α-Fe, α-Mn, γ-FeMn and Ag, provided the material with excellent mechanical properties (tensile strength UTS = 722 MPa, tensile strain A = 38%) and a higher corrosion rate (CR = 3.2 ± 0.2 mm/year). However, higher corrosion rates, associated with an increased release of degradation elements, could also raise toxicity concerns, especially at the beginning of the corrosion pattern. In this study, The focus of the present work was the control of the CR by surface modification, with nitrogen plasma immersion ion implantation (N-PIII) treatment that was applied to mechanically polished (MP) samples. This plasma treatment (PT) improved the corrosion resistance of the material, assessed by static degradation immersion tests (SDITs), especially during the first degradation stages. Twenty-eight days later, the degradation rate reached the same value of the MP condition. Nitrogen compounds on the surface of the substrate played an important role in the corrosion mechanism and corrosion product formation. The degradation analysis was carried out also by potentiodynamic tests in modified Hanks' balanced salt solution (MHBSS), and Dulbecco's phosphate buffered saline solution (DPBSS). The corrosion rate was higher in MHBSS for both conditions. However, there was no significant difference between the corrosion rate of the PT in DPBSS (CR = 1.9 ± 0.6 mm/year) and in MHBSS (CR = 2 ± 1.4 mm/year). The cell viability was assessed with human vein endothelial cells (HUVECs) via an indirect metabolic activity test (MTT assay). Due to the lower ion release of the PT condition, the cell viability increased significantly. Thus, nitrogen implantation can control the in vitro corrosion rate starting from the very first stage of the implantation, improving cell viability.

Facile fabrication of Fe/Fe3C embedded in N-doped carbon nanofiber for efficient degradation of tetracycline via peroxymonosulfate activation: Role of superoxide radical and singlet oxygen

The toxic metal ions leaching and metal nanoparticles agglomeration were the critical issues for metal-based carbon materials during the peroxymonosulfate (PMS) activation processes. Herein, a facile strategy was first proposed that zero-dimensional Fe/Fe₃C nanoparticles were embedded in one-dimensional N-doped carbon nanofiber (Fe/Fe₃C@NCNF) to solve the above challenges. The as-obtained Fe/Fe₃C@NCNF-800 possessed a low E_a value (11.7 kJ/mol) and exhibited high activity for activating PMS to degrade tetracycline (TC) in a wide range of pH 3-11. As expected, the iron ions leaching concentration of Fe/Fe₃C@NCNF-800 was very low (0.082 mg/L). Meanwhile, the Fe/Fe₃C@NCNF-800 was easily recovered from the reaction solution due to its magnetic properties. Both superoxide radicals (O₂^∙-) and non-radical of singlet oxygen (¹O₂) were the primary reactive oxygen species (ROS) in the Fe/Fe₃C@NCNF-800/PMS system via quenching tests and electron spin resonance spectroscopy (ESR). The catalytic mechanism suggested that the Fe/Fe₃C and graphitic N were the main active sites in the Fe/Fe₃C@NCNF-800 for PMS activation. This work provided a facile method for the preparation of Fe-based carbon materials with high catalytic ability, low metal leaching and easy recycling, showing a broad prospect for environmental applications.

Nickel-Iron Nitride-Nickel Sulfide Composites for Oxygen Evolution Electrocatalysis

Advance applications like water splitting system and rechargeable metal-air battery are highly dependent on efficient electrocatalyst for the oxygen evolution reaction (OER). Heterostructured materials, with a high active surface area and electron effect, accomplish enhanced catalytic performance. Here, a nitride-sulfide composite (FeNi₃N-Ni₃S₂) has been prepared by a simple hydrothermal process coupled with nitridation. The prepared composite electrocatalyst FeNi₃N-Ni₃S₂ possesses lower electron densities compared to those of FeNi₃N and Ni₃S₂, lessening the activation energy (E_a) toward the OER. Consequently, the prepared FeNi₃N-Ni₃S₂ exhibits excellent OER performance with a low overpotential (230 mV) and a small Tafel slope (38 mV dec^-1). Highly stable FeNi₃N-Ni₃S₂ composite delivers lower charging voltage and extended lifetime in rechargeable Zn-air battery, compared with IrO₂.

Sodalite-type Cu-based Three-dimensional Metal-Organic Framework for Efficient Oxygen Reduction Reaction

Inspired by copper-based oxygen reduction biocatalysts, we have studied the electrocatalytic behavior of a Cu-based MOF (Cu-BTT) for oxygen reduction reaction (ORR) in alkaline medium. This catalyst reduces the oxygen at the onset (E_onset ) and half-wave potential (E^1/2 ) of 0. 940 V and 0.778 V, respectively. The high halfway potential supports the good activity of Cu-BTT MOF. The high ORR catalytic activity can be interpreted by the presence of nitrogen-rich ligand (tetrazole) and the generation of nascent copper(I) during the reaction. In addition to the excellent activity, Cu-BTT MOF showed exceptional stability too, which was confirmed through chronoamperometry study, where current was unchanged up to 12 h. Further, the 4-electrons transfer of ORR kinetics was confirmed by hydrodynamic voltammetry. The oxygen active center namely copper(I) generation during ORR has been understood by the reduction peak in cyclic voltammetry as well in the XPS analysis.

Noble-Metal-Free Iron Nitride/Nitrogen-Doped Graphene Composite for the Oxygen Reduction Reaction

Considerable effort has been devoted recently to replace platinum-based catalysts with their non-noble-metal counterparts in the oxygen reduction reaction (ORR) in fuel cells. Nitrogen-doped carbon structures emerged as possible candidates for this role, and their earth-abundant metal-decorated composites showed great promise. Here, we report on the simultaneous formation of nitrogen-doped graphene and iron nitride from the lyophilized mixture of graphene oxide and iron salt by high-temperature annealing in ammonia atmosphere. A mixture of FeN and Fe2N particles was formed with average particle size increasing from 23.4 to 127.0 nm and iron content ranging from 5 to 50 wt %. The electrocatalytic oxygen reduction activity was investigated via the rotating disk electrode method in alkaline media. The highest current density of 3.65 mA cm-2 at 1500 rpm rotation rate was achieved in the 20 wt % catalyst via the four-electrode reduction pathway, exceeding the activity of both the pristine iron nitride and the undecorated nitrogen-doped graphene. Since our catalysts showed improved methanol tolerance compared to the platinum-based ones, the formed non-noble-metal system offers a viable alternative to the platinum-decorated carbon black (Pt/CB) ORR catalysts in direct methanol fuel cells.

A facile strategy to fabricate nitrogen-doped graphene aerogel-supported Fe3N nanoparticles as efficient electrocatalysts for the oxygen reduction reaction

In this study, a novel hybrid composed of iron nitride and nitrogen-functionalized graphene aerogel (Fe₃N/N-GA) was fabricated and used as an electrode material for the oxygen reduction reaction (ORR).

Nanoparticle-Stacked Porous Nickel-Iron Nitride Nanosheet: A Highly Efficient Bifunctional Electrocatalyst for Overall Water Splitting

Nanoparticle-stacked porous Ni3FeN nanosheets were synthesized through a simple nitridation reaction of the corresponding LDHs. The nanosheet is composed of stacked nanoparticles with more active sites exposed for electrocatalytic reactions. Thus, it exhibited excellent oxygen evolution reaction performance having an extremely low overpotential of 223 mV at 10 mA/cm(2) and hydrogen evolution reaction property with a very low overpotential of 45 mV at 10 mA/cm(2). This electrocatalyst as bifunctional electrodes is used to overall water splitting in alkaline media, showing a high performance with 10 mA/cm(2) at a cell voltage of 1.495 V.

Synergetic adsorption and catalytic oxidation performance originating from leafy graphite nanosheet anchored iron(ii) phthalocyanine nanorods for efficient organic dye degradation

Leafy graphite nanosheet anchored iron(ii) phthalocyanine nanorods (FePc@LGNS) were facilely synthesized without using a complex covalent anchoring procedure.