Unraveling the effect of particle size of active metals in Ni/MgO on methane activation and carbon growth mechanism

For dry reforming of methane, the active metal particle size of the catalyst has a significant effect on both the reaction activity and the resistance to carbon deposition. In this study, nickel particles of different sizes (Ni13, Ni25, and Ni37) supported on the MgO(100) slab are used to study the mechanism of CH4 activation and carbon growth based on DFT theoretical calculations. According to the results, the energy of adsorption for reaction intermediates changes depending on the size of the active metal. The adsorption process of CH3, CH2, CH and C on Ni25/MgO has a maximum exothermic value. Furthermore, the energy barriers of CH4 four-step dehydrogenation are lowest on Ni25/MgO during the CH4 activation process. The growth process of carbon deposition on the catalysts is also investigated in this work. The results indicate that the growth of carbon from C5 to C6 is difficult to proceed on Ni13/MgO due to size and active site limitation. Additionally, with an increase in particle size of the active metal, the absolute value of growth energy and average carbon binding energy of Cn increase on both Ni25/MgO and Ni37/MgO. It is proved that smaller particle size presents better resistance to carbon deposition. In the studied size range, Ni25/MgO is demonstrated to have greater catalytic activity and better resistance to carbon deposition.

Modulating the Local Coordination Environment of Single-Atom Catalysts for Enhanced Catalytic Performance in Hydrogen/Oxygen Evolution Reaction

Single-atom catalysts (SACs) hold the promise of utilizing 100% of the participating atoms in a reaction as active catalytic sites, achieving a remarkable boost in catalytic efficiency. Thus, they present great potential for noble metal-based electrochemical application systems, such as water electrolyzers and fuel cells. However, their practical applications are severely hindered by intrinsic complications, namely atom agglomeration and relocation, originating from the uncontrollably high surface energy of isolated single-atoms (SAs) during postsynthetic treatment processes or catalytic reactions. Extensive efforts have been made to develop new methodologies for strengthening the interactions between SAs and supports, which could ensure the desired stability of the active catalytic sites and their full utilization by SACs. This review covers the recent progress in SACs development while emphasizing the association between the regulation of coordination environments (e.g., coordination atoms, numbers, sites, structures) and the electrocatalytic performance of the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). The crucial role of coordination chemistry in modifying the intrinsic properties of SACs and manipulating their metal-loading, stability, and catalytic properties is elucidated. Finally, the future challenges of SACS development and the industrial outlook of this field are discussed.

Density-Functional Tight-Binding Study of Carbonaceous Species Diffusion on the (100)-γ-Al2O3 Surface

Carbonaceous or oxy-carbon species are intermediates formed during C _x H _y combustion on a Pt _n /Al₂O₃ catalyst, which contain carbon, hydrogen, and oxygen atoms. The accumulation of the carbonaceous species, arguably, leads to catalytic deactivation; therefore, their removal is of importance. As the diffusion process is occasionally the rate-determining step in the growth of carbonaceous species, the present study aims to reveal the diffusion mechanisms. The free energy barriers of acetate, formate, and methoxy diffusion on the (100)-γ-Al₂O₃ surface were evaluated through extensive metadynamics simulations at the density-functional tight-binding level. The present work deduces that each adopted carbonaceous species exhibits different diffusion mechanisms and supports experimental evidence that the acetate species exhibits the slowest diffusivity among the adopted carbonaceous species.

Contrasting the Role of Ni/Al2O3 Interfaces in Water-Gas Shift and Dry Reforming of Methane

Transition metal nanoparticles (NPs) are typically supported on oxides to ensure their stability, which may result in modification of the original NP catalyst reactivity. In a number of cases, this is related to the formation of NP/support interface sites that play a role in catalysis. The metal/support interface effect verified experimentally is commonly ascribed to stronger reactants adsorption or their facile activation on such sites compared to bare NPs, as indicated by DFT-derived potential energy surfaces (PESs). However, the relevance of specific reaction elementary steps to the overall reaction rate depends on the preferred reaction pathways at reaction conditions, which usually cannot be inferred based solely on PES. Hereby, we use a multiscale (DFT/microkinetic) modeling approach and experiments to investigate the reactivity of the Ni/Al₂O₃ interface toward water-gas shift (WGS) and dry reforming of methane (DRM), two key industrial reactions with common elementary steps and intermediates, but held at significantly different temperatures: 300 vs 650 °C, respectively. Our model shows that despite the more energetically favorable reaction pathways provided by the Ni/Al₂O₃ interface, such sites may or may not impact the overall reaction rate depending on reaction conditions: the metal/support interface provides the active site for WGS reaction, acting as a reservoir for oxygenated species, while all Ni surface atoms are active for DRM. This is in contrast to what PESs alone indicate. The different active site requirement for WGS and DRM is confirmed by the experimental evaluation of the activity of a series of Al₂O₃-supported Ni NP catalysts with different NP sizes (2-16 nm) toward both reactions.

Probing the electronic structures of Con (n = 1–5) clusters on γ-Al2O3 surfaces using first-principles calculations

Using density functional theory calculations, we discussed the geometric and electronic structures and nucleation of small Co clusters on γ-Al₂O₃(100) and γ-Al₂O₃(110) surfaces.

Correlating the surface structure and hydration of a γ-Al2O3 support with the Run (n = 1–4) cluster adsorption behavior: a density functional theory study

Theory configurations consisting of Ru_n (1–4) clusters on a γ-Al₂O₃ support are constructed to illustrate the effect of surface structure and hydration on adsorption performance.

The growth of Nin clusters and their interaction with cubic, monoclinic, and tetragonal ZrO2 surfaces–a theoretical and experimental study

The interaction and growth of Ni clusters on three phases of ZrO₂ surfaces were investigated through theoretical and experimental methods.

The difference of roles of alkaline-earth metal oxides on silica-supported nickel catalysts for CO2 methanation

Modification of alkaline-earth oxides to Ni/SiO₂ catalyst could affect significantly the reducibility of Ni species under the given reduction conditions.