Fabrication of MnSnO2 intercalated TA-rGO modified sensor for selective electrochemical detection of chloramphenicol in real samples

Chloramphenicol (CAP), a potent antibiotic capable of inhibiting protein synthesis, presents significant challenges related to long-term dosing and its persistent leaching into the environment, raising concerns about environmental contamination and resistance development. To address this issue, we developed a reliable, low-cost, and biocompatible nanocomposite material comprising tannic acid (TA)-reduced graphene oxide (rGO) intercalated into manganese-doped tin oxide nanoparticles (MnSnO₂ NPs). The structural formation and catalytic activity of the MnSnO₂ NPs/TA-rGO nanocomposite were characterized using field emission-scanning electron microscopy (FE-SEM), high-resolution transmission electron microscopy (HR-TEM), X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), and electrochemical techniques. This material exhibits robust interfacial interactions and synergistic effects, resulting in an admirable electrocatalytic reduction response for CAP sensing. The presence of co-interference molecules improved the selectivity performance of the MnSnO2 NPs/TA-rGO-modified glassy carbon electrode. The fabricated exhibited a two linear determination range (0.011-103.43 μmol L-1 and 103.43-1924.16 μmol L-1), with a detection limit (LOD) is 6.7 nmol L-1 and limit of quantification (LOQ) is 12.3 nmol L-1. Furthermore, this sensor demonstrated good sensitivity, admirable reproducibility, repeatability, and storage stability. Finally, the practicability of the fabricated MnSnO2 NPs/TA-rGO glassy carbon electrode sensor was evaluated by analyzing the CAP content in milk, honey, eye drops, biofluids (human serum and urine), and river water, and satisfactory recovery rates of 95.4 %-100.3 % were noted.

Dynamic properties of photogenerated charge in BiOBr/Bi2WO6/GO ternary composites and its application for organic pollutants degradation

Carbon-based Materials have been extensively researched for their prospect in the fields of environment and energy, especially for graphene oxide (GO). In this work, a novel sodium dodecyl sulfate (SDS)-assisted synthesis of BiOBr/Bi2WO6/GO ternary composite has been synthesized successfully by a handy hydrothermal method. Photoluminescence, Photocurrent, Electrochemical Impedance Spectroscopy, surface photovoltage and transient photovoltage measurements illustrate that construction of p-n BiOBr/Bi2WO6 heterojunction leads to the obviously enhancement of charge separation efficiency, and the photogenerated electrons trapped by GO can effectively inhibit the recombination process of photogenerated charge, resulting in the improvement of charge separation efficiency and the longer lifetime of photogenerated carriers for BiOBr/Bi2WO6/GO. The characterization of structure and morphology indicate that role of GO can also improve the visible light absorption range, and the SDS-assisted synthesis can reduce the size of particle in the composite and enhances the specific surface area of the composite by regulating the particle size and agglomeration. Under optimal conditions, BiOBr/Bi2WO6/GO (SDS) has the outstanding photocatalytic degradation performance and the degradation rate constants for oxytetracycline, tetracycline hydrochloride, methylene blue and rhodamine are 0.056, 0.057, 0.103 and 0.414 min-1, respectively. Notably, the degradation rate constants obtained by BiOBr/Bi2WO6/GO (SDS) are more ten times higher than that of pure BiOBr and Bi2WO6. The possible mechanism of photocatalytic degradation was suggested for BiOBr/Bi2WO6/GO based on the dynamic properties of photogenerated charge and reactive oxidation species results. Surprisingly, the recyclability of the BiOBr/Bi2WO6/GO (SDS) composite obtained from the cyclic experiments has laid a foundation for the study of efficient and stable photocatalysts.

Effect of Manganese Distribution on Sensor Properties of SnO2/MnOx Nanocomposites

Nanocomposites SnO₂/MnO_x with various manganese content (up to [Mn]/[Sn] = 10 mol. %) and different manganese distribution were prepared by wet chemical technique and characterized by X-ray diffraction, scanning electron microscopy (SEM) with energy dispersive X-ray (EDX) analysis and mapping, IR and Raman spectroscopy, total reflection X-ray fluorescence, mass-spectrometry with inductive-coupled plasma (ICP-MS), X-ray photoelectron spectroscopy (XPS), electron paramagnetic resonance (EPR) spectroscopy. A different distribution of manganese between the volume and the surface of the SnO₂ crystallites was revealed depending on the total Mn concentration. Furthermore, the identification of surface MnO₂ segregation was performed via Raman spectroscopy. There is a strong dependence of the sensor signal toward CO and, especially, NO) on the presence of MnO₂ surface segregation. However, manganese ions intruding the SnO₂ crystal structure were shown to not almost effect on sensor properties of the material.

Band Gap Tuning in Transition Metal and Rare-Earth-Ion-Doped TiO2, CeO2, and SnO2 Nanoparticles

The energy gap Eg between the valence and conduction bands is a key characteristic of semiconductors. Semiconductors, such as TiO2, SnO2, and CeO2 have a relatively wide band gap Eg that only allows the material to absorb UV light. Using the s-d microscopic model and the Green's function method, we have shown two possibilities to reduce the band-gap energy Eg-reducing the NP size and/or ion doping with transition metals (Co, Fe, Mn, and Cu) or rare earth (Sm, Tb, and Er) ions. Different strains appear that lead to changes in the exchange-interaction constants, and thus to a decrease in Eg. Moreover, the importance of the s-d interaction, which causes room-temperature ferromagnetism and band-gap energy tuning in dilute magnetic semiconductors, is shown. We tried to clarify some discrepancies in the experimental data.

The impact of fluence dependent 120 MeV Ag swift heavy ion irradiation on the changes in structural, electronic, and optical properties of AgInSe2 nano-crystalline thin films for optoelectronic applications

Swift heavy ion (SHI) irradiation in thin films significantly modifies the structure and related properties in a controlled manner. In the present study, the 120 MeV Ag ion irradiation on AgInSe₂ nanoparticle thin films prepared by the thermal evaporation method and the induced modifications in the structure and other properties are being discussed. The ion irradiation led to the suppression of GIXRD and Raman peaks with increasing ion fluence, which indicated amorphization of the AgInSe₂ structure along the path of 120 MeV Ag ions. The Poisson's fitting of the ion fluence dependence of the normalized area under the GIXRD peak of AgInSe₂ gave the radius of the ion track as 5.8 nm. Microstructural analysis using FESEM revealed a broad bi-modal distribution of particles with mean particle sizes of 67.5 nm and 159 nm in the pristine film. The ion irradiation led to the development of uniform particles on the film surface with a mean size of 36 nm at high ion fluences. The composition of the film was checked by the energy dispersive X-ray fluorescence (EDXRF) spectrometer. The UV-visible spectroscopy revealed the increase of the electronic bandgap of AgInSe₂ films with an increase in ion fluence due to quantum confinement. The Hall measurement and EDXRF studies showed that the unirradiated and irradiated AgInSe₂ films have n-type conductivity and vary with the ion fluence. The changes in the films were tuned with different ion fluence and are favorable for both optical and electronic applications.

Swift heavy ion (SHI) irradiation in thin films significantly modifies the structure and related properties in a controlled manner.

Template-directed synthesis of Sm2Ti2O7 nanoparticles: a FRET-based fluorescent chemosensor for the fast and selective determination of picric acid

Fluorescence “turn off” detection of picric acid using a Sm₂Ti₂O₇ nanoprobe.

Tin-oxide nanoparticles deposited from a beam: what happens to the composition?

The debate around the oxidation states occurring in laboratory-prepared tin-oxide samples has been for a long time an obstacle for an unambiguous assignment of characterization studies performed on such samples. In particular the changes in the Sn core-level energies caused by oxidation - i.e. the chemical shifts - as measured by photoelectron spectroscopy (PES) have been under discussion. The assignment problem is especially pronounced for nanoscale structures, which are important for photovoltaics, electronics, catalysis, and gas sensing. The reasons for the difficulties lie both in the natural properties of tin oxides, which can have substantial deficiencies of oxygen and tin in the lattice, and in the shortcomings of the fabrication and PES-characterization procedures themselves. Our recent PES study on tin-oxide nanoparticles fabricated by vapour-aggregation gave a chemical shift two times larger than earlier reported for Sn(iv) oxide for the Sn 4d level. The implemented fabrication technique forms an in-vacuum beam of particles whose composition can be both controlled and characterized by PES. In the present work SnO and SnO2 nanoparticles fabricated this way were deposited from the beam and probed by PES directly, as well as after exposure to air. The deposited nanoparticle films were also imaged by TEM (Transmission Electron Microscopy). The effects of the deposition process and exposure to air on the chemical composition were studied. The PES study of deposited SnO2 nanoparticles in the Sn 4d and Sn 3d core-level regions revealed the same core level shift as for unsupported nanoparticles, indicating that the chemical composition is preserved in the deposition process. The TEM study demonstrated a crystalline structure of separate SnO2 particles with lattice constants close to the macroscopic Sn(iv)-oxide. The PES study on the particles exposed to air showed changes in the composition. For the film of initially SnO particles a higher intermediate oxide was created. For the SnO2 nanoparticle film a lower, but strong, intermediate oxide was observed, likely at the surface.

Alternative Type Two-Dimensional-Three-Dimensional Lead Halide Perovskite with Inorganic Sodium Ions as a Spacer for High-Performance Light-Emitting Diodes

Two-dimensional (2D) lead halide perovskites with long-chain ammonium halides display high photoluminescence quantum yields (PLQYs), because of their size and dielectric confinement, which hold promise for a high-efficiency and low-cost light-emitting diode (LED). However, the presence of an insulating organic long-chain spacer cation (L) dramatically deteriorates the charge transport properties along the out-of-plane nanoplatelet direction or adjacent nanocrystals, which would limit the device performance of the LED. To overcome this issue, we successfully incorporate small alkaline ions such as sodium (Na⁺) to replace the long organic molecule. Grazing incidence X-ray diffraction measurements verify 2D layer formation with a preferred crystallite orientation. In addition, the incorporated sodium salt also generates amorphous sodium lead bromide (NaPbBr₃) in perovskite as spacers to form a nanocrystal-like halide perovskite film. The PLQY is dramatically improved in the sodium-incorporated film because of its enhanced photoluminescence lifetime. Upon incorporation of a low concentration of an organic additive, this two-dimensional-three-dimensional (2D-3D) perovskite can achieve a compact and uniform film. Therefore, a 2D-3D perovskite achieves a high external quantum efficiency of 15.9% with good operational stability. We develop a type of 2D-3D halide perovskite with various inorganic ions as spacers for promising high-performance optoelectronic devices.

A Low Spin Manganese(IV) Nitride Single Molecule Magnet

Structural, spectroscopic and magnetic methods have been used to characterize the tris(carbene)borate compound PhB(MesIm)3Mn≡N as a four-coordinate manganese(IV) complex with a low spin (S = 1/2) configuration. The slow relaxation of the magnetization in this complex, i.e. its single-molecule magnet (SMM) properties, is revealed under an applied dc field. Multireference quantum mechanical calculations indicate that this SMM behavior originates from an anisotropic ground doublet stabilized by spin-orbit coupling. Consistent theoretical and experiment data show that the resulting magnetization dynamics in this system is dominated by ground state quantum tunneling, while its temperature dependence is influenced by Raman relaxation.

SnO2-decorated multiwalled carbon nanotubes and Vulcan carbon through a sonochemical approach for supercapacitor applications

Multiwalled carbon nanotubes (MWCNTs) and Vulcan carbon (VC) decorated with SnO2 nanoparticles were synthesized using a facile and versatile sonochemical procedure. The as-prepared nanocomposites were characterized by means of transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and Fourier transform infra red spectroscopy. It was evidenced that SnO2 nanoparticles were uniformly distributed on both carbon surfaces, tightly decorating the MWCNTs and VC. The electrochemical performance of the nanocomposites was evaluated by cyclic voltammetry and galvanostatic charge/discharge cycling. The as-synthesized SnO2/MWCNTs nanocomposites show a higher capacity than the SnO2/VC nanocomposites. Concretely, the SnO2/MWCNTs electrodes exhibit a specific capacitance of 133.33 F g(-1), whereas SnO2/VC electrodes exhibit a specific capacitance of 112.14 F g(-1) measured at 0.5 mA cm(-2) in 1 M Na2SO4.