Supramolecular interactions between functional saccharide-based ionic liquids and cellulose macromolecules

Interactions between polysaccharides and ionic liquids (ILs) at the molecular level are essential to elucidate the dissolution and/or plasticization mechanism of polysaccharides. Herein, saccharide-based ILs (SILs) were synthesized, and cellulose membrane was soaked in different SILs to evaluate the interactions between SILs and cellulose macromolecules. The relevant results showed that the addition of SILs into cellulose can effectively reduce the intra- and/or inter-molecular hydrogen bonds of polysaccharides. Glucose-based IL showed the intensest supramolecular interactions with cellulose macromolecules compared to sucrose- and raffinose-based ILs. Two-dimensional correlation and perturbation-correlation moving window Fourier transform infrared techniques were for the first time used to reveal the dynamic variation of the supramolecular interactions between SILs and cellulose macromolecules. Except for the typical HO⋯H interactions of cellulose itself, stronger -Cl⋯HO hydrogen bonding interactions were detected in the specimen of SILs-modified cellulose membranes. Supramolecular interactions of -Cl⋯H, HO⋯H, C-Cl⋯H, and -C=O⋯H between SILs and cellulose macromolecules sequentially responded to the stimuli of temperature. This work provides a new perspective to understanding the interaction mechanism between polysaccharides and ILs, and an avenue to develop the next-generation ILs for dissolving or thermoplasticizing polysaccharide materials.

Bridging the crystal and solution structure of a series of lipid-inspired ionic liquids

A series of 1,2-dimethylimidazolium ionic liquids bearing a hexadecyl alkyl chain are thoroughly examined via X-ray crystallography. The crystal structures reveal several key variations in the non-covalent interactions in the lipid-like salts. Specifically, distinct cation-cation π interactions are observed when comparing the bromide and iodide structures. Changing the anion to bis(trifluoromethane)sulfonimide (Tf₂N^-) changes these cation-cation π interactions with anion⋯π interactions. Additionally, several well-defined geometries of the cations are noted based on torsion and core-plane angles of the alkyl chains. Hirshfeld surface analysis is used to distinguish the interactions and geometries in the solid state, helping to reveal characteristic structural fingerprints for the compounds. The solid-state structures of the ionic liquids are correlated with the solution-state structures through UV-vis spectroscopic studies, further emphasizing the importance of the π interactions in the formation of aggregates. Finally, we investigated the thermal properties of the ionic liquids, revealing complex phase transitions for the iodide-containing species. These phase transitions are further rationalized via the analysis of the data gathered from the structures of the other crystallized salts.

A New Class of Task-Specific Imidazolium Salts and Ionic Liquids and Their Corresponding Transition-Metal Complexes for Immobilization on Electrochemically Active Surfaces

Adding to the versatile class of ionic liquids, we report the detailed structure and property analysis of a new class of asymmetrically substituted imidazolium salts, offering interesting thermal characteristics, such as liquid crystalline behavior, polymorphism or glass transitions. A scalable general synthetic procedure for N-polyaryl-N'-alkyl-functionalized imidazolium salts with para-substituted linker (L) moieties at the aryl chain, namely [LPhm ImH R]+ (L=Br, CN, SMe, CO2 Et, OH; m=2, 3; R=C12 , PEGn ; n=2, 3, 4), was developed. These imidazolium salts were studied by single-crystal X-ray diffraction (SC-XRD), NMR spectroscopy and thermochemical methods (DSC, TGA). Furthermore, these imidazolium salts were used as N-heterocyclic carbene (NHC) ligand precursors for mononuclear, first-row transition metal complexes (MnII , FeII , CoII , NiII , ZnII , CuI , AgI , AuI ) and for the dinuclear Ti-supported Fe-NHC complex [(OPy)2 Ti(OPh2 ImC12 )2 (FeI2 )] (OPy=pyridin-2-ylmethanolate). The complexes were studied concerning their structural and magnetic behavior via multi-nuclear NMR spectroscopy, SC-XRD analyses, variable temperature and field-dependent (VT-VF) SQUID magnetization methods, X-band EPR spectroscopy and, where appropriate, zero-field 57 Fe Mössbauer spectroscopy.

NMR Spectroscopic Studies of Cation Dynamics in Symmetrically-Substituted Imidazolium-Based Ionic Liquid Crystals

Ionic liquid crystals (ILCs) present a new class of non-molecular soft materials with a unique combination of high ionic conductivity and anisotropy of physicochemical properties. Symmetrically-substituted long-chain imidazolium-based mesogenic ionic liquids exhibiting a smectic liquid crystalline phase were investigated by solid state NMR spectroscopy and computational methods. The aim of the study was to reveal the correlation between cation size and structure, local dynamics, and orientational order in the layered mesophase. The obtained experimental data are consistent with the model of a rod-shaped cation with the two chains aligned in opposite directions outward from the imidazolium core. The alignment of the core plane to the phase director and the restricted conformations of the chain segments were determined and compared to those in single-chain counterparts. The orientational order parameter S~0.5-0.6 of double-chain ionic liquid crystals is higher than that of corresponding single-chain analogues. This is compatible with the enhanced contribution of van der Waals forces to the stabilization of smectic layers. Increased orientational order for the material with Br^- counterions, which exhibit a smaller ionic radius and higher ability to form hydrogen bonds as compared to that of BF₄^-, also indicated a non-negligible influence of electrostatic and hydrogen bonding interactions. The enhanced rod-shape character and higher orientational order of symmetrically-substituted ILCs can offer additional opportunities in the design of self-assembling non-molecular materials.

An experimental and computational study on the material dispersion of 1-alkyl-3-methylimidazolium tetrafluoroborate ionic liquids

The material dispersion of the [Ckmim][BF4] (k = 2, 3, 4, 6, 7, 8, 10) family of ionic liquids is measured at several temperatures over a broad spectral range from 300 nm to 1550 nm. The experimental curves are fitted to a modified three-resonance Sellmeier model to understand the effects of temperature and alkyl chain length on the dispersion behaviour. From the parameters of the fitting, we analyze the influence that the different constituents of these ionic liquids have on the dispersion behaviour. In addition, a semi-empirical approach combining simulated electronic polarizabilities and experimental densities for predicting the material dispersion is successfully tested by using a direct comparison with the experimental results. The limitations of this method are analyzed in terms of the molecular structure of the ionic liquids. The results of this work aim to increase our knowledge about how the molecular structure of an ionic liquid influences its material dispersion. Understanding this influence is fundamental to producing ionic liquids with tailored optical properties.

Understanding ionic mesophase stabilization by hydration: a solid-state NMR study

The correlation between the water contribution to hydrogen bonding within ionic sublayer, mesophase order parameter, and ion translational self-diffusion in the layered ionic liquid crystalline phase is investigated. Changes in hydrogen bonding, conformational and translational dynamics, and orientational order upon hydration were followed by solid-state NMR combined with density functional theory (DFT) analysis. We observed that the smectic mesophase of monohydrated imidazolium-based ionic liquids, which was stabilized in a wider temperature range compared to that of anhydrous materials, counterintuitively exhibited a lower orientational order of organic cations. Thus the role of anisotropic alignment of cations and contribution of dispersion forces in the mesophase stability decreased upon hydration. The local dynamics of cations is controlled by the alignment of the bulky methyl-imidazolium ring, experiencing strong electrostatic and H-bond interactions in the ionic sublayer. Anisotropy of translational diffusion increased in the hydrated samples, thus supporting the layer-stabilizing effect of water. The effect of decreasing molecular order is outweighed by the contribution of water hydrogen bonding to the overall interaction energy within the ionic sublayer.

Thermotropic Liquid-Crystalline and Light-Emitting Properties of Bis(4-aalkoxyphenyl) Viologen Bis(triflimide) Salts

A series of bis(4-alkoxyphenyl) viologen bis(triflimide) salts with alkoxy chains of different lengths were synthesized by the metathesis reaction of respective bis(4-alkoxyphenyl) viologen dichloride salts, which were in turn prepared from the reaction of Zincke salt with the corresponding 4-n-alkoxyanilines, with lithium triflimide in methanol. Their chemical structures were characterized by 1H and 13C nuclear magnetic resonance spectra and elemental analysis. Their thermotropic liquid-crystalline (LC) properties were examined by differential scanning calorimetry, polarizing optical microscopy, and variable temperature X-ray diffraction. Salts with short length alkoxy chains had crystal-to-liquid transitions. Salts of intermediate length alkoxy chains showed both crystal-to-smectic A (SmA) transitions, Tms, and SmA-to-isotropic transitions, Tis. Those with longer length of alkoxy chains had relatively low Tms at which they formed the SmA phases that persisted up to the decomposition at high temperatures. As expected, all of them had excellent thermal stabilities in the temperature range of 330-370 °C. Their light-emitting properties in methanol were also included.

Substituted Azolium Disposition: Examining the Effects of Alkyl Placement on Thermal Properties

We describe the thermal phase characteristics of a series of 4,5-bis(n-alkyl)azolium salts that were studied using thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), polarized-light optical microscopy (POM), and synchrotron-based small- to wide-angle X-ray scattering (SWAXS) measurements. Key results were obtained for 1,3-dimethyl-4,5-bis(n-undecyl)imidazolium iodide (1-11), 1,3-dimethyl-4,5-bis(n-pentadecyl)- imidazolium iodide (1-15), and 1,2,3-trimethyl-4,5-bis(n-pentadecyl)imidazolium iodide (2), which were found to adopt enantiotropic smectic A mesophases. Liquid-crystalline mesophases were not observed for 1,3-dimethyl-4,5-bis(n-heptyl)imidazolium iodide (1-7), 3-methyl-4,5-bis(n-penta-decyl)thiazolium iodide (3), and 2-amino-4,5-bis(n-pentadecyl)imidazolium chloride (4). Installing substituents in the 4- and 5-positions of the imidazolium salts appears to increase melting points while lowering clearing points when compared to data reported for 1,3-disubstituted analogues.

Charge Transport and Phase Behavior of Imidazolium-Based Ionic Liquid Crystals from Fully Atomistic Simulations

Ionic liquid crystals occupy an intriguing middle ground between room-temperature ionic liquids and mesostructured liquid crystals. Here, we examine a non-polarizable, fully atomistic model of the 1-alkyl-3-methylimidazolium nitrate family using molecular dynamics in the constant pressure-constant temperature ensemble. These materials exhibit a distinct "smectic" liquid phase, characterized by layers formed by the molecules, which separate the ionic and aliphatic moieties. In particular, we discuss the implications this layering may have for electrolyte applications.

Phase equilibrium and physical properties of biobased ionic liquid mixtures

Protic ionic liquid crystals (PILCs) obtained from natural sources are promising compounds due to their peculiar properties and sustainable appeal.

Iodine-Pseudohalogen Ionic Liquid-Based Electrolytes for Quasi-Solid-State Dye-Sensitized Solar Cells

In the current work, novel symmetrically alkyl-substituted imidazolium-based ionic liquids have been synthesized featuring either iodide (I^-) or selenocyanate (SeCN^-) as counteranions. Physicochemical assays based on spectroscopy and electrochemistry techniques have been performed to identify the best ionic liquid for application as electrolytes in quasi-solid-state dye-sensitized solar cells (qssDSSC). The latter were mixed with additives such as 4-tert-butylpyridine (4tbpy) and guanidinium thiocyanate (GuSCN) to optimize electrode surface coverage, ionic diffusion, and dye regeneration. In addition, we demonstrate that electrolytes containing a mixture of I₂ and (SeCN)₂ enhance the open-circuit voltage of the final quasi-solid-state device by up to 70 mV. As such, iodine-pseudohalogen electrolytes reveal in qssDSSCs a good balance between dye regeneration and hole transport and, in turn, enhance the overall solar energy conversion efficiency by 70% with respect to reference qssDSSCs with iodine-based electrolytes. Finally, devices with the iodine-pseudohalogen electrolyte show a 1000 h stable efficiency of 7-8% under outdoor temperature operation conditions and 1 sun illumination.

Tuning Coulombic interactions to stabilize nematic and smectic ionic liquid crystal phases in mixtures of charged soft ellipsoids and spheres

We have investigated the effect of electrostatic interactions in mixtures of soft ellipsoids and spheres based on the well-known Gay-Berne (GB) and Lennard-Jones (LJ) potential, respectively. These model systems, in their original version, that is without any electrostatic charge, have been thoroughly investigated in the literature both as pure components and mixtures. In particular, mixtures of particles of different shapes, such as spheres and ellipsoids, tend to phase separate because of the excluded volume effects. Common ionic liquid crystals, based on imidazolium or other quaternary ammonium salts, are usually composed of roughly elongated (although flexible) cations and roughly spherical anions, that is, particles with a similar shape such as the GB and LJ models. Therefore, in this work, we present the results of molecular dynamics simulations of mixtures of positively charged GB and negatively charged LJ particles as models of ionic liquid crystals. Interestingly, by modulating the charge of the particles it is possible to stabilize isotropic, nematic, smectic and crystalline ionic phases. The relative weight of Coulomb (a radial, therefore isotropic interaction) and van der Waals (an anisotropic interaction) contributions is a key parameter to tune the stability of various mesophases.

Phase Behavior and Physical Properties of New Biobased Ionic Liquid Crystals

Protic ionic liquids (PILs) have emerged as promising compounds and attracted the interest of the industry and the academy community, due to their easy preparation and unique properties. In the context of green chemistry, the use of biocompounds, such as fatty acids, for their synthesis could disclose a possible alternative way to produce ILs with a low or nontoxic effect and, consequently, expanding their applicability in biobased processes or in the development of bioproducts. This work addressed efforts to a better comprehension of the complex solid-[liquid crystal]-liquid thermodynamic equilibrium of 20 new PILs synthesized by using fatty acids commonly found in vegetable oils, as well as their rheological profile and self-assembling ability. The work revealed that their phase equilibrium and physical properties are significantly impacted by the structure of the ions used for their synthesis. The use of unsaturated fatty acids and bis(2-hydroxyethyl)ammonium for the synthesis of these biobased ILs led to a drastic decreasing of their melting temperatures. Also, the longest alkyl chain fatty acids promoted higher self-assembling and more stable mesophases. Besides their sustainable appeal, the marked high viscosity, non-Newtonian profile, and very low critical micellar concentration values of the PIL crystals here disclosed make them interesting renewable compounds with potential applications as emulsifiers, stabilizers, thickeners, or biolubricants.

Key Developments in Ionic Liquid Crystals

Ionic liquid crystals are materials that combine the classes of liquid crystals and ionic liquids. The first one is based on the multi-billion-dollar flat panel display industry, whilst the latter quickly developed in the past decades into a family of highly-tunable non-volatile solvents. The combination yields materials with a unique set of properties, but also with many challenges ahead. In this review, we provide an overview of the key concepts in ionic liquid crystals, particularly from a molecular perspective. What are the important molecular parameters that determine the phase behavior? How should they be introduced into the molecules? Finally, which other tools does one have to realize specific properties in the material?

Ionic Liquid Crystals: Versatile Materials

This Review covers the recent developments (2005-2015) in the design, synthesis, characterization, and application of thermotropic ionic liquid crystals. It was designed to give a comprehensive overview of the "state-of-the-art" in the field. The discussion is focused on low molar mass and dendrimeric thermotropic ionic mesogens, as well as selected metal-containing compounds (metallomesogens), but some references to polymeric and/or lyotropic ionic liquid crystals and particularly to ionic liquids will also be provided. Although zwitterionic and mesoionic mesogens are also treated to some extent, emphasis will be directed toward liquid-crystalline materials consisting of organic cations and organic/inorganic anions that are not covalently bound but interact via electrostatic and other noncovalent interactions.

Synthesis and characterization of imidazolium poly(azolyl)borate ionic liquids and their potential application in SO2 absorption

New imidazolium poly(azolyl)borate ionic liquids (ILs) were synthesized by salt metathesis, and they can absorb SO₂ through multi-site interactions at 20 °C, 0.1 MPa SO₂ with the highest SO₂ capacity of 5.8 mol mol⁻¹ of IL and 1.05 g g⁻¹ of IL.

Ionic liquid crystals with novel thermal properties formed by the gemini surfactants containing four hydroxyl groups

The ionic liquid crystals formed by the gemini surfactants containing four hydroxyl groups show sustained-release behavior of phase enthalpy.

1,3-Dialkylimidazolium modified clay sorbents for perchlorate removal from water

Clay modified using the 1-hexadecyl-3-methylimidazolium cation (C16-clay) shows perchlorate adsorption of 15.6 mg g⁻¹ accompanied by a conformational change and decrease in d-spacing.

The efficient hydroxyalkylation of phenol with formaldehyde to bisphenol F over a thermoregulated phase-separable reaction system containing a water-soluble Brønsted acidic ionic liquid

A temperature-dependent biphasic system of IL–phenol–water was applied in the hydroxyalkylation of phenol with formaldehyde to bisphenol F. [C₆MIM][HSO₄] gave high yield of 80.5% and selectivity of 96.9% for bisphenol F. The recovered [C₆MIM][HSO₄] retained the original activity after six recycling-uses.