Self-assembled polymersomes formed by symmetric, asymmetric and side-chain-tethered coil-rod-coil triblock copolymers

The self-assembly behavior of polymer brushes induced by the orientational ordering of rod backbones: a dissipative particle dynamics study

This work proposed the “rod–coil competitive mechanism” for the self-assembly of polymer brushes with rod–coil backbones.

Shape Transformations of Vesicles Self-Assembled from Amphiphilic Hyperbranched Multiarm Copolymers via Simulation

The understanding of shape transformations of vesicles is of fundamental importance in biological and clinical sciences. Hyperbranched polymer vesicles (branched polymersomes) are newly emerging polymer vesicles with special structure and property. They have also been regarded as a good model for biomembranes. However, the shape transformations of hyperbranched polymer vesicles have not been studied from either an experimental or theoretical level. Herein, the shape transformations of vesicles self-assembled from amphiphilic hyperbranched multiarm copolymers (HMCs) in response to the interaction parameters between the hydrophobic core and hydrophilic arms and the polymer concentrations are investigated carefully through dissipative particle dynamics (DPD) simulations. In the morphological phase diagram, two types of vesicles are obtained: one type corresponds to vesicles without holes formed at low concentrations including unilamellar vesicles, double-lamellar vesicles, discocyte-shaped vesicles, and tubular vesicles, and the other type corresponds to vesicles with holes formed at high concentrations including stomatocyte-shaped vesicles, toroidal vesicles, genus-3 (G-3) toroidal vesicles with three holes, and genus-4 (G-4) toroidal vesicles with four holes. In addition, both the self-assembly mechanisms and the dynamics for the formation of these vesicles have been systematically studied. The current work will offer theoretical support for fabricating novel vesicles with various shapes from hyperbranched polymers.

Solution self-assembly behavior of rod-alt-coil alternating copolymers via simulations

The self-assembly behaviors of rod-alt-coil alternating copolymers were systematically investigated by employing dissipative particle dynamics simulations.

Dynamics of bridge-loop transformation in a membrane with mixed monolayer/bilayer structures

Instead of forming a typical bilayer or monolayer membrane, both the bridge (I-shape) and loop (U-shape) conformations coexist in the planar membranes formed by ABA triblock copolymers in a selective solvent. The non-equilibrium and equilibrium relaxation dynamics of polymer conformations are monitored. The non-equilibrium relaxation time depends on the initial composition and increases with an increase in the immiscibility between A and B blocks. The equilibrium composition of the loop-shape polymer is independent of the initial composition and A-B immiscibility. However, the extent of equilibrium composition fluctuations subsides as the A and B blocks become highly incompatible. The influences of the A-B immiscibility on the geometrical, mechanical, and transport properties of the membrane have also been investigated. As the immiscibility increases, the overall membrane thickness and the B block layer thickness (h) increase because of the increment in the molecular packing density. As a result, both the stretching (K_A) and bending (K_B) moduli grow significantly with the increasing A-B immiscibility. Consistent with the case of typical membranes, the ratio K_B/K_Ah² = 2 × 10^-3 is a constant. Although the lateral diffusivity of polymers is insensitive to immiscibility, the membrane permeability decreases substantially as the A-B immiscibility is increased.

A dissipative particle dynamics simulation study on phase diagrams for the self-assembly of amphiphilic hyperbranched multiarm copolymers in various solvents

Self-assembly of amphiphilic hyperbranched multiarm copolymers (HMCs) has shown great potential for preparing all kinds of delicate supramolecular structures in all scales and dimensions in solution. However, theoretical studies on the influencing factors for the self-assembly of HMCs have been greatly lagging behind. The phase diagram of HMCs in selective solvents is very necessary but has not been disclosed up to now. Here, the self-assembly of HMCs with different hydrophilic fractions in various solvents was studied systematically by using dissipative particle dynamics (DPD) simulations. Three morphological phase diagrams are constructed and a rich variety of morphologies, ranging from spherical micelles, worm-like micelles, membranes, vesicles, vesosomes, small micellar aggregates (SMAs), and aggregates of spherical and worm-like micelles to helical micelles, are obtained. In addition, both the self-assembly mechanisms and the dynamic processes for the formation of these self-assemblies have been systematically investigated. The simulation results are consistent with available experimental observations. Besides, several novel structures, like aggregates of spherical and worm-like micelles, vesosomes and helical micelles, are firstly discovered for HMC self-assembly. We believe the current work will extend the knowledge on the self-assembly of HMCs, especially on the control of supramolecular structures and on fabricating novel self-assemblies.

Simulation of self-assembly of polyzwitterions into vesicles

Using the Langevin dynamics method and a coarse-grained model, we have studied the formation of vesicles by hydrophobic polymers consisting of periodically placed zwitterion side groups in dilute salt-free aqueous solutions. The zwitterions, being permanent charge dipoles, provide long-range electrostatic correlations which are interfered by the conformational entropy of the polymer. Our simulations are geared towards gaining conceptual understanding in these correlated dipolar systems, where theoretical calculations are at present formidable. A competition between hydrophobic interactions and dipole-dipole interactions leads to a series of self-assembled structures. As the spacing d between the successive zwitterion side groups decreases, single chains undergo globule → disk → worm-like structures. We have calculated the Flory-Huggins χ parameter for these systems in terms of d and monitored the radius of gyration, hydrodynamic radius, spatial correlations among hydrophobic and dipole monomers, and dipole-dipole orientational correlation functions. During the subsequent stages of self-assembly, these structures lead to larger globules and vesicles as d is decreased up to a threshold value, below which no large scale morphology forms. The vesicles form via a polynucleation mechanism whereby disk-like structures form first, followed by their subsequent merger.

Nanoparticle-Induced Ellipse-to-Vesicle Morphology Transition of Rod-Coil-Rod Triblock Copolymer Aggregates

Cooperative self-assembly behavior of rod-coil-rod poly(γ-benzyl-l-glutamate)-block-poly(ethylene glycol)-block-poly(γ-benzyl-l-glutamate) (PBLG-b-PEG-b-PBLG) amphiphilic triblock copolymers and hydrophobic gold nanoparticles (AuNPs) was investigated by both experiments and dissipative particle dynamics (DPD) simulations. It was discovered that pure PBLG-b-PEG-b-PBLG copolymers self-assemble into ellipse-like aggregates, and the morphology transforms into vesicles as AuNPs are introduced. When the hydrophobicity of AuNPs is close to that of the copolymers, AuNPs are homogeneously distributed in the vesicle wall. While for the AuNPs with higher hydrophobicity, they are embedded in the vesicle wall as clusters. In addition to the experimental observations, DPD simulations were performed on the self-assembly behavior of triblock copolymer/nanoparticle mixtures. Simulations well reproduced the morphology transition observed in the experiments and provided additional information such as chain packing mode in aggregates. It is deduced that the main reason for the ellipse-to-vesicle transition of the aggregates is attributed to the breakage of ordered and dense packing of PBLG rods in the aggregate core by encapsulating AuNPs. This study deepens our understanding of the self-assembly behavior of rod-coil copolymer/nanoparticle mixtures and provides strategy for designing hybrid polypeptide nanostructures.

Dissipative particle dynamics simulation study on self-assembly of amphiphilic hyperbranched multiarm copolymers with different degrees of branching

Hyperbranched multiarm copolymers (HMCs) have shown great potential to be excellent precursors in self-assembly to form various supramolecular structures in all scales and dimensions in solution. However, theoretical studies on the self-assembly of HMCs, especially the self-assembly dynamics and mechanisms, have been greatly lagging behind the experimental progress. Herein, we investigate the effect of degree of branching (DB) on the self-assembly structures of HMCs by dissipative particle dynamics (DPD) simulation. Our simulation results demonstrate that the self-assembly morphologies of HMCs can be changed from spherical micelles, wormlike micelles, to vesicles with the increase of DBs, which are qualitatively consistent with the experimental observations. In addition, both the self-assembly mechanisms and the dynamic processes for the formation of these three aggregates have been systematically disclosed through the simulations. These self-assembly details are difficult to be shown by experiments and are very useful to fully understand the self-assembly behaviors of HMCs.

Construction of stable polymeric vesicles based on azobenzene and beta-cyclodextrin grafted poly(glycerol methacrylate)s for potential applications in colon-specific drug delivery

Stable polymeric vesicles constructed from cyclodextrin- and azobenzene-grafted poly(glycerol methacrylate)s exhibited potential applications in colon-specific drug delivery.

Structural and mechanical characteristics of polymersomes

Polymersomes self-assembled from amphiphilic macromolecules have attracted growing attention because of their multifunctionality and stability. By controlling the structural characteristics of polymersomes, including vesicle shape, size, and membrane thickness, their mechanical and transport properties as well as their fusion behavior can be manipulated. Numerous experimental techniques have been developed to explore polymersome characteristics; however, experimental microscopic observations and knowledge of vesicles are limited. Mesoscale simulations can complement experimental studies of the vesicular features at the microscopic level and thus provide a feasible method to better understand the relationship between the fundamental structures and physicochemical properties of polymersomes. Moreover, the predictive ability of the simulation approaches may greatly assist developments and future applications of polymersomes.