A real-time fluorescence turn-on assay for trypsin based on a conjugated polyelectrolyte

Label-free Fluorescence Turn on Trypsin Assay Based on Gemini Surfactant/heparin/Nile Red Supramolecular Assembly

In this research, we designed a label-free fluorometric turn-on assay for trypsin and inhibitor screening, based on a spherical cationic gemini surfactant ethylene-bis (dodecyl dimethyl ammonium bromide) (EDAB)/heparin/Nile red (NR) supramolecular assembly system. The introduction of gemini surfactant EDAB as template greatly enhanced its salt resistance and resulted in the supramolecular assemblies with diameters ranging from 20 to 100 nm. The fluorometric assay for trypsin was performed by firstly disassembling with protamine (a heparin-binding protein) and then re-assembling through hydrolysis of protamine. The disassembly and reassembly of the system resulted in a turn-off first and then a turn-on behavior of the corresponding fluorescence. The overall processes were characterized by fluorescence spectra, TEM measurements and zeta potential tests. The detection level of this assembly system for trypsin was as low as 4.2 ng mL-1. Also, the EDAB/heparin/NR assembly could be used to screen the trypsin inhibitors. The assembly system was easily-fabricated and cost-effective, but also exhibited good salt tolerance in NaCl solution at the concentration of 0-500 mM. At last, the supramolecular assembly was successfully applied to detect trypsin in human urine, demonstrating its great potential on clinical diagnosis applications.

Remote biosensor for the determination of trypsin by using nanoporous anodic alumina as a three-dimensional nanostructured material

The determination of trypsin in the human real sample is a routine medical investigation to assess the pancreatic disease. Herein, we fabricated an interferometric reflectance spectroscopy based biosensor for the determination trypsin. For this purpose, urease and fluorescein 5(6)-isothiocyanate (FLITC) were immobilized on the nanoporous anodic alumina (NAA). The operation principle of the proposed biosensor is based on the change in the pH of the solution during the reaction of urease and urea and therefore change in the light-absorbing ability of FLITC in the presence of trypsin. The reaction of the urease enzyme with urea increased the pH of the solution because of producing ammonia. This increase in the pH of solution increased the light-absorbing ability of the immobilized FLITC on NAA and therefore the intensity of the reflected light from the NAA to the charge-coupled device detector decreased. In the presence of trypsin, the catalytic activity of immobilized urease on NAA decreased. This decrease in the activity of urease enzyme consequent on the decrease in the amount of the generated ammonia. Therefore, the immobilized FLITC on the NAA did not absorb more light and consciously, the intensity of the light reflected light into the detector increased. The proposed biosensor exhibited a good response to the concentration of trypsin in the range of 0.25–20 μg.mL⁻¹ with the limit of detection of 0.06 μg.mL⁻¹.

Label-Free Fluorescent Detection of Trypsin Activity Based on DNA-Stabilized Silver Nanocluster-Peptide Conjugates

Trypsin is important during the regulation of pancreatic exocrine function. The detection of trypsin activity is currently limited because of the need for the substrate to be labeled with a fluorescent tag. A label-free fluorescent method has been developed to monitor trypsin activity. The designed peptide probe consists of six arginine molecules and a cysteine terminus and can be conjugated to DNA-stabilized silver nanoclusters (DNA-AgNCs) by Ag-S bonding to enhance fluorescence. The peptide probe can also be adsorbed to the surface of graphene oxide (GO), thus resulting in the fluorescence quenching of DNA-AgNCs-peptide conjugate because of Förster resonance energy transfer. Once trypsin had degraded the peptide probe into amino acid residues, the DNA-AgNCs were released from the surface of GO, and the enhanced fluorescence of DNA-AgNCs was restored. Trypsin can be determined with a linear range of 0.0-50.0 ng/mL with a concentration as low as 1 ng/mL. This label-free method is simple and sensitive and has been successfully used for the determination of trypsin in serum. The method can also be modified to detect other proteases.

Supramolecular Ensembles Formed between Charged Conjugated Polymers and Glycoprobes for the Fluorogenic Recognition of Receptor Proteins

This paper describes the simple construction of a unique class of supramolecular ensembles formed by electrostatic self-assembly between charged conjugated polymers and fluorophore-coupled glycoligands (glycoprobes) for the selective fluorogenic detection of receptor proteins at both the molecular and cellular levels. We show that positively and negatively charged diazobenzene-containing poly(p-phenylethynylenes) (PPEs) can be used to form stable fluorogenic probes with fluorescein-based (negatively charged) and rhodamine B based (positively charged) glycoprobes by electrostatic interaction. The structures of the ensembles have been characterized by spectroscopic and microscopic techniques. The supramolecular probes formed show quenched fluorescence in an aqueous buffer solution, which can be specifically recovered, in a concentration-dependent manner, through competitive complexation with a selective protein receptor, over a range of other unselective proteins. The ensembles also show selective fluorescence enhancement with a live cell that expresses the glycoligand receptor but not a control cell without receptor expression.

Sensitive Conjugated-Polymer-Based Fluorescent ATP Probes and Their Application in Cell Imaging

Three cationic conjugated polyelectrolytes (CPEs) with a common poly(p-phenylene ethynylene terthiophene) backbone and side chains of different lengths, named as PPET3-N1, PPET3-N2, and PPET3-N3, were designed and synthesized. The UV-vis absorption and fluorescence spectra of the polymers vary strongly with solvent composition, suggesting that the polymers are strongly aggregated in H2O. In addition, the spectroscopic properties of the polymers are affected by small-molecule ATP, characterized by significant fluorescence intensity decreases and red shifts of their absorption bands. Further application of these polymers in cell imaging was studied by confocal fluorescence microscopy, which demonstrated that all of the polymers were localized on the cell membrane and partially inside of cells and that the staining effect gradually increased with the length of the polymer side chains. On the basis of the low cytotoxicity and efficient quenching of PPET3-N2 by ATP, the dose and time effects of ATP on PPET3-N2 imaging were studied, and the results indicated that this polymer might have potential in cell imaging for ATP semiquantification in vivo.

Interlocked supramolecular glycoconjugated polymers for receptor-targeting theranostics

We report an interlocked supramolecular ensemble formed between a conjugated polymer (CP) and a fluorescent glycoprobe for receptor-targeting cancer cell theranostics.

Ultrasensitive fluorescent detection of trypsin on the basis of surfactant–protamine assembly with tunable emission wavelength

A facile and ultrasensitive fluorometric assay for trypsin detection was successfully established on the basis of SDS/protamine/fluorescent hydrophobic dye micellar-type assemblies and enzyme-triggered disassembly.

A sensitive assay for trypsin using poly(thymine)-templated copper nanoparticles as fluorescent probes

A new, simple and sensitive fluorescence strategy was developed for the trypsin assay based on copper nanoparticles (CuNPs) and its different fluorescence response toward trypsin-catalyzed hydrolysis of cytochrome c (Cyt c). Polythymine (poly T)-templated CuNPs served as effective fluorescent probes. Cyt c is well-known to act as a quencher. However, herein, a low concentration of Cyt c was designed specially to act as the substrate of trypsin to avoid the quenching effects by electron transfer from Cyt c to CuNPs. In the presence of trypsin, Cyt c hydrolyzes to small peptides, releasing free cysteine residues. Nonfluorescent coordination complexes were formed upon exposure to free cysteine residues by a metal-ligand bond between Cu atoms and sulfur atoms, leading to a decreased fluorescence response to CuNPs. This novel method for the quantitative determination of trypsin has a linear detection range from 0.25 μg mL(-1) to 1000 μg mL(-1) and a relatively low detection limit of 42 ng mL(-1). To the best of our knowledge, this is the first application of the trypsin-catalyzed hydrolysis reaction of Cyt c to produce quenching effect in bioanalysis, which provided a novel approach for the biochemical sensing strategy.

Fluorescence array-based sensing of metal ions using conjugated polyelectrolytes

Array-based sensing offers several advantages for detecting a series of analytes with common structures or properties. In this study, four anionic conjugated polyelectrolytes (CPEs) with a common poly(p-pheynylene ethynylene) (PPE) backbone and varying pendant ionic side chains were designed. The conjugation length, repeat unit pattern, and ionic side chain composition were the main factors affecting the fluorescence patterns of CPE polymers in response to the addition of different metal ions. Eight metal ions, including Pb(2+), Hg(2+), Fe(3+), Cr(3+), Cu(2+), Mn(2+), Ni(2+), and Co(2+), categorized as water contaminants by the Environmental Protection Agency, were selected as analytes in this study. Fluorescence intensity response patterns of the four-PPE sensor array toward each of the metal ions were recorded, analyzed, and transformed into canonical scores using linear discrimination analysis (LDA), which permitted clear differentiation between metal ions using both two-dimensional and three-dimensional graphs. In particular, the array could readily differentiate between eight toxic metal ions in separate aqueous solutions at 100 nM. Our four-PPE sensor array also provides a practical application to quantify Pb(2+) and Hg(2+) concentrations in blind samples within a specific concentration range.

Multiplexed electrochemical detection of trypsin and chymotrypsin based on distinguishable signal nanoprobes

In this work, we developed a novel multisignal output for simultaneous detection of multiple proteases by using nanoprobes labeled with distinguishable electrochemical probes. First, biotinylated peptide1 (S1) and biotinylated peptide2 (S2) were associated with biotinylated DNA1 and DNA2 via biotin-streptavidin interaction, forming DNA1-S1 and DNA2-S2, respectively. Two distinguishable signal nanoprobes (DNA1'-Au NPs-Thi and DNA2'-Au NPs-Fc) were prepared by initial assembling DNA1' and DNA2' on the Au NPs surface, respectively, and then carrying corresponding thionine (Thi) and 6-(Ferrocenyl)hexanethiol (Fc). Then, the peptide substrates (DNA1-S1 and DNA2-S2) were immobilized on gold electrode surface through Au-S bonds, and the DNA1'-Au NPs-Thi and DNA2'-Au NPs-Fc were assembled to the peptide-DNA-modified electrode surface via DNA hybridization. The targets of trypsin and chymotrypsin can specifically recognize and cleave peptides with different sequences, releasing DNA1'-Au NPs-Thi and DNA2'-Au NPs-Fc from the electrode surface into solution, thus decreasing the current of Thi and Fc. The decrease in the electrochemical currents of the two signal nanoprobes enables us to simultaneously and quantitatively determine the targets trypsin and chymotrypsin. More importantly, this strategy can be extended easily by designing various proteases-specific peptide substrates and utilizing corresponding electrochemical detectable elements for simultaneous multiplex protease assay in various biosystems.

Sensitive detection of trypsin using liquid-crystal droplet patterns modulated by interactions between poly-L-lysine and a phospholipid monolayer

Liquid-crystal (LC) droplet patterns are formed on a glass slide by evaporating a solution of nematic LC dissolved in heptane. In the presence of an anionic phospholipid, 1,2-dioleoyl-sn-glycero-3-phospho-rac-(1-glycerol) (DOPG), the LCs display a dark cross pattern, indicating a homeotropic orientation. When LC patterns are incubated with an aqueous mixture of DOPG and poly-L-lysine (PLL), there is a transition in the LC pattern from a dark cross to a bright fan shape due to the electrostatic interaction between DOPG and PLL. Known to catalyze the hydrolysis of PLL into oligopeptide fragments, trypsin is preincubated with PLL, significantly decreasing the interactions between PLL and DOPG. LCs adopt a perpendicular orientation at the water-LC droplet interface, which gives rise to a dark cross pattern. This optical response of LC droplets is the basis for a quick and sensitive biosensor for trypsin.

A fluorescence turn on trypsin assay based on aqueous polyfluorene

A new method based on the electrostatic interaction of a novel anionic water soluble polymer P1 with a positively charged polypeptide Arg₆ was developed for a continuous and real time turn on assay for the enzymatic activity of trypsin under alkaline conditions with a limit of detection of 0.17 nM. This method was also able to screen the inhibitors of trypsin. P1 fluorescence intensity was significantly decreased by the positively charged Arg₆ due to the electrostatic interaction, whereas the enzymatic action recovered P1 fluorescence due to the fragmentation of Arg₆ into small positively charged fragments and these were unable to quench the P1 fluorescence. Therefore, by triggering the fluorescence intensity change, it was possible to assay the enzymatic activity. Use of water soluble conjugated polymer P1 and no labeling on the substrate enhances the utility of this method significantly.