Flexible hybrid film of polypyrrole incorporated chitosan as a biomimetic multistep electrochemical sensor of working temperature: a potentiodynamic study

A flexible polypyrrole/hydrogel hybrid film composed of macromolecular electrochemical machines is considered as a model material of the intracellular matrix of ectothermic muscle cells capable of sensing ambient thermal energy.

Tuning multilayered polymeric self-standing films for controlled release of L-lactate by electrical stimulation

We examine different approaches for the controlled release of L-lactate, which is a signaling molecule that participates in tissue remodeling and regeneration, such as cardiac and muscle tissue. Robust, flexible, and self-supported 3-layers films made of two spin-coated poly(lactic acid) (PLA) layers separated by an electropolymerized poly(3,4-ethylenedioxythiophene) (PEDOT) layer, are used as loading and delivery systems. Films with outer layers prepared using homochiral PLA and with nanoperforations of diameter 146 ± 70 experience more bulk erosion, which also contributes to the release of L-lactic acid, than those obtained using heterochiral PLA and with nanoperforations of diameter 66 ± 24. Moreover, the release of L-lactic acid as degradation product is accelerated by applying biphasic electrical pulses. The four approaches used for loading extra L-lactate in the 3-layered films were: incorporation of L-lactate at the intermediate PEDOT layer as primary dopant agent using (1) organic or (2) basic water solutions as reaction media; (3) substitution at the PEDOT layer of the ClO₄^- dopant by L-lactate using de-doping and re-doping processes; and (4) loading of L-lactate at the outer PLA layers during the spin-coating process. Electrical stimuli were applied considering biphasic voltage pulses and constant voltages (both negative and positive). Results indicate that the approach used to load the L-lactate has a very significant influence in the release regulation process, affecting the concentration of released L-lactate up to two orders of magnitude. Among the tested approaches, the one based on the utilization of the outer layers for loading, approach (4), can be proposed for situations requiring prolonged and sustained L-lactate release over time. The biocompatibility and suitability of the engineered films for cardiac tissue engineering has also been confirmed using cardiac cells.

A green method based on electro-assisted and photo-assisted regeneration for removal of chromium(VI) from aqueous solution

In general, spent adsorbent is regenerated using high-concentration chemicals. Although chemical regeneration is efficient, it often leads to adsorbent damage and secondary waste. To overcome these problems, electro-assisted and photo-assisted regeneration were proposed in this study for the remediation of hexavalent chromium (Cr(VI)). Filter paper was decorated with polyethylene glycol (PEG) and polypyrrole (PPy) to fabricate a FP/PEG/PPy nanocomposite, which could be used as an adsorbent for Cr(VI) with a high adsorption capacity. Moreover, it could be regenerated by electro-assisted or photo-assisted regeneration to reduce eluent use. As a result, secondary waste could be greatly reduced.

Reactions driving conformational movements (molecular motors) in gels: conformational and structural chemical kinetics

E_a,k,αandβfrom reactions driving molecular polymeric motors constituting dense gels include quantitative conformational and structural information.

Controlling the electro-mechanical performance of polypyrrole through 3- and 3,4-methyl substituted copolymers

A unique study of the impact of crosslinking on the electro-mechanical performance of electropolymerised polypyrrole films using laser-scanning micrometry.

Exchanged cations and water during reactions in polypyrrole macroions from artificial muscles

The movement of the bilayer (polypyrrole-dodecylbenzenesulfonate/tape) during artificial muscle bending under flow of current square waves was studied in aqueous solutions of chloride salts. During current flow, polypyrrole redox reactions result in variations in the volumes of the films and macroscopic bending: swelling by reduction with expulsion of cations and shrinking by oxidation with the insertion of cations. The described angles follow a linear function, different in each of the studied salts, of the consumed charge: they are faradaic polymeric muscles. The linearity indicates that cations are the only exchanged ions in the studied potential range. By flow of the same specific charge in every electrolyte, different angles were described by the muscle. The charge and the angle allow the number and volume of both the exchanged cations and the water molecules (related to a reference) between the film to be determined, in addition to the electrolyte per unit of charge during the driving reaction. The attained apparent solvation numbers for the exchanged cations were: 0.8, 0.7, 0.6, 0.5, 0.5, 0.4, 0.25, and 0.0 for Na(+), Mg(2+), La(3+), Li(+), Ca(2+), K(+), Rb(+), and Cs(+), respectively.

Polypyrrole–para-phenolsulfonic acid/tape artificial muscle as a tool to clarify biomimetic driven reactions and ionic exchanges

Driven reactions, complex ionic exchanges and structural changes are clarified by bending bilayer muscles and corroborated by EDX analysis.