Small Molecule-Mediated Stage-Specific Reprogramming of MSCs to Hepatocyte-Like Cells and Hepatic Tissue for Liver Injury Treatment

BACKGROUND

Derivation of hepatocytes from stem cells has been established through various protocols involving growth factor (GF) and small molecule (SM) agents, among others. However, mesenchymal stem cell-based derivation of hepatocytes still remains expensive due to the use of a cocktail of growth factors, and a long duration of differentiation is needed, thus limiting its potential clinical application.

METHODS

In this study, we developed a chemically defined differentiation strategy that is exclusively based on SM and takes 14 days, while the GF-based protocol requires 23-28 days.

RESULTS

We optimized a stage-specific differentiation protocol for the differentiation of rat bone marrow-derived mesenchymal stem cells (MSCs) into functional hepatocyte-like cells (dHeps) that involved four stages, i.e., definitive endoderm (DE), hepatic competence (HC), hepatic specification (HS) and hepatic differentiation and growth. We further generated hepatic tissue using human decellularized liver extracellular matrix and compared it with hepatic tissue derived from the growth factor-based protocol at the transcriptional level. dHep, upon transplantation in a rat model of acute liver injury (ALI), was capable of ameliorating liver injury in rats and improving liver function and tissue damage compared to those in the ALI model.

CONCLUSIONS

In summary, this is the first study in which hepatocytes and hepatic tissue were derived from MSCs utilizing a stage-specific strategy by exclusively using SM as a differentiation factor.

Liver Extracellular Matrix-Based Nanofiber Scaffolds for the Culture of Primary Hepatocytes and Drug Screening

Immortalized liver cell lines and primary hepatocytes are currently used as in vitro models for hepatotoxic drug screening. However, a decline in the viability and functionality of hepatocytes with time is an important limitation of these culture models. Advancements in tissue engineering techniques have allowed us to overcome this challenge by designing suitable scaffolds for maintaining viable and functional primary hepatocytes for a longer period of time in culture. In the current study, we fabricated liver-specific nanofiber scaffolds with polylactic acid (PLA) along with a decellularized liver extracellular matrix (LEM) by the electrospinning technique. The fabricated hybrid PLA-LEM scaffolds were more hydrophilic and had better swelling properties than the PLA scaffolds. The hybrid scaffolds had a pore size of 38 ± 8 μm and supported primary rat hepatocyte cultures for 10 days. Increased viability (2-fold increase in the number of live cells) and functionality (5-fold increase in albumin secretion) were observed in primary hepatocytes cultured on the PLA-LEM scaffolds as compared to those on conventional collagen-coated plates on day 10 of culture. A significant increase in CYP1A2 enzyme activity was observed in hepatocytes cultured on PLA-LEM hybrid scaffolds in comparison to those on collagen upon induction with phenobarbital. Drugs like acetaminophen and rifampicin showed the highest toxicity in hepatocytes cultured on hybrid scaffolds. Also, the lethal dose of these drugs in rodents was accurately predicted as 1.6 g/kg and 594 mg/kg, respectively, from the corresponding IC50 values obtained from drug-treated hepatocytes on hybrid scaffolds. Thus, the fabricated liver-specific electrospun scaffolds maintained primary hepatocyte viability and functionality for an extended period in culture and served as an effective ex vivo drug screening platform to predict an accurate in vivo drug-induced hepatotoxicity.

Evolution of Electrospinning in Liver Tissue Engineering

The major goal of liver tissue engineering is to reproduce the phenotype and functions of liver cells, especially primary hepatocytes ex vivo. Several strategies have been explored in the recent past for culturing the liver cells in the most apt environment using biological scaffolds supporting hepatocyte growth and differentiation. Nanofibrous scaffolds have been widely used in the field of tissue engineering for their increased surface-to-volume ratio and increased porosity, and their close resemblance with the native tissue extracellular matrix (ECM) environment. Electrospinning is one of the most preferred techniques to produce nanofiber scaffolds. In the current review, we have discussed the various technical aspects of electrospinning that have been employed for scaffold development for different types of liver cells. We have highlighted the use of synthetic and natural electrospun polymers along with liver ECM in the fabrication of these scaffolds. We have also described novel strategies that include modifications, such as galactosylation, matrix protein incorporation, etc., in the electrospun scaffolds that have evolved to support the long-term growth and viability of the primary hepatocytes.

Sodium Butyrate Induces Hepatic Differentiation of Mesenchymal Stem Cells in 3D Collagen Scaffolds

Stem cell-based therapy is considered an attractive tool to overcome the burden of liver diseases. However, efficient hepatic differentiation is still a big challenge for the research community. In this study, we explored a novel method for differentiation of bone marrow-derived mesenchymal stem cells (MSCs) into hepatic-like cells using 3D culture conditions and histone deacetylase inhibitor, sodium butyrate (NaBu). MSCs were characterized by the presence of cell surface markers via immunocytochemistry, flow cytometry, and by their potential for osteogenic, adipogenic, and chondrogenic differentiation. MSCs were treated with 1mM NaBu in 2D and 3D environments for 21 days. The hepatic differentiation was confirmed by qPCR and immunostaining. According to qPCR data, the 3D culture of NaBu-treated MSCs has shown significant upregulation of hepatic gene, CK-18 (P < 0.01), and hepatic proteins, AFP (P < 0.01) and ALB (P < 0.01). In addition, immunocytochemistry analysis showed significant increase (P < 0.05) in the acetylation of histones (H3 and H4) in NaBu-pretreated cells. It can be concluded from the study that NaBu-treated MSCs in 3D culture conditions can induce hepatic differentiation without the use of additional cytokines and growth factors. The method shown in this study represents an improved protocol for hepatic differentiation and could contribute to improvement in future cell-based therapeutics.

Generation and transplantation of hepatocytes-like cells using human origin hepatogenic serum for acute liver injury treatment

Liver failure is a critical disease for which regenerative therapies are still being explored. The major limitation in the use of a clinical grade, viable cell-based therapy approach is the scarce availability of sufficient number of in-vitro differentiated hepatocyte-like cells (HLC) that can induce regeneration and ameliorate liver injury. Here, we report for the first time an approach to engineer HLCs using sera of hyperbilirubin patients that act as a reservoir of differentiation factor. Utilizing our humanized approach, mesenchymal stem cells (hMSC) derived from umbilical cord tissue were transdifferentiated into HLC using patient-derived serum along with dimethyl sulfoxide (DMSO). We studied the effects of serum on the proliferation, cell cycle analysis, and apoptosis of hMSC by various differentiation combinations. We optimized the hepatic transdifferentiation ability of hMSC with hyperbilirubin serum treatment for a period of 7 days. Assessment of HLC functionalities was shown by quantifying the HLC spent medium for albumin and urea secretions. Transplantation of HLC in an acute liver injury (ALI) rat model showed an effective improvement in the liver function and histological changes in the liver. The results of this study suggest that hMSC-derived HLC using humanized hepatogenic serum holds a promising potential for cell transplantation, as an efficient therapy modality for liver failure in humans.

Short-Duration High Frequency MegaHertz-Order Nanomechanostimulation Drives Early and Persistent Osteogenic Differentiation in Mesenchymal Stem Cells

Stem cell fate can be directed through the application of various external physical stimuli, enabling a controlled approach to targeted differentiation. Studies involving the use of dynamic mechanical cues driven by vibrational excitation to date have, however, been limited to low frequency (Hz to kHz) forcing over extended durations (typically continuous treatment for >7 days). Contrary to previous assertions that there is little benefit in applying frequencies beyond 1 kHz, we show here that high frequency MHz-order mechanostimulation in the form of nanoscale amplitude surface reflected bulk waves are capable of triggering differentiation of human mesenchymal stem cells from various donor sources toward an osteoblast lineage, with early, short time stimuli inducing long-term osteogenic commitment. More specifically, rapid treatments (10 min daily over 5 days) of the high frequency (10 MHz) mechanostimulation are shown to trigger significant upregulation in early osteogenic markers (RUNX2, COL1A1) and sustained increase in late markers (osteocalcin, osteopontin) through a mechanistic pathway involving piezo channel activation and Rho-associated protein kinase signaling. Given the miniaturizability and low cost of the devices, the possibility for upscaling the platform toward practical bioreactors, to address a pressing need for more efficient stem cell differentiation technologies in the pursuit of translatable regenerative medicine strategies, is ensivaged.

Antibacterial multicomponent electrospun nanofibrous mat through the synergistic effect of biopolymers

The endeavor was to adopt a facile bi-layered approach to fabricate a novel PVA-chitosan-collagen-licorice nanofibrous mat (PCCLNM) with maintaining the spinning parameters and conditions to assess the synergistic antibacterial action of two biopolymers and having properties for repairing tissues. Bonding behavior, morphological orientation, antibacterial activity, and moisture management features of the electrospun nanofibrous mat were investigated using various characterization techniques. The FTIR analysis of the manufactured nanofibrous mat revealed characteristic peaks of licorice, chitosan, collagen, and PVA polymer, confirming the presence of all polymers in the sample. Additionally, a scanning electron microscopy (SEM) image attributes the development of nanofibers with an average diameter for top and bottom sides were 219 and 188 nm respectively. Furthermore, moisture management tests (MMT) confirm PCCLNM’s slow absorption and drying capabilities. Apart from that, a disk diffusion method was used to investigate antibacterial activity against the bacteria Staphylococcus aureus (S. aureus), which revealed a strong presence of antibacterial activity with a 20 mm zone of inhibition due to the chemical constituents of licorice and chitosan compound. The developed bio-nanocomposite could have a potential application as wound healing material.

3D Modeling of Epithelial Tumors-The Synergy between Materials Engineering, 3D Bioprinting, High-Content Imaging, and Nanotechnology

The current statistics on cancer show that 90% of all human cancers originate from epithelial cells. Breast and prostate cancer are examples of common tumors of epithelial origin that would benefit from improved drug treatment strategies. About 90% of preclinically approved drugs fail in clinical trials, partially due to the use of too simplified in vitro models and a lack of mimicking the tumor microenvironment in drug efficacy testing. This review focuses on the origin and mechanism of epithelial cancers, followed by experimental models designed to recapitulate the epithelial cancer structure and microenvironment, such as 2D and 3D cell culture models and animal models. A specific focus is put on novel technologies for cell culture of spheroids, organoids, and 3D-printed tissue-like models utilizing biomaterials of natural or synthetic origins. Further emphasis is laid on high-content imaging technologies that are used in the field to visualize in vitro models and their morphology. The associated technological advancements and challenges are also discussed. Finally, the review gives an insight into the potential of exploiting nanotechnological approaches in epithelial cancer research both as tools in tumor modeling and how they can be utilized for the development of nanotherapeutics.

Relation between micro- and nanostructure features and biological properties of the decellularized rat liver

Organ decellularization is one of the promising technologies of regenerative medicine, which allows obtaining cell-free extracellular matrix (ECM), which provide preservation of the composition, architecture, vascular network and biological activity of the ECM. The method of decellularization opens up wide prospects for its practical application not only in the field of creating full-scale bioengineered structures, but also in the manufacture of vessels, microcarriers, hydrogels, and coatings. The main goal of our work was the investigation of structure and biological properties of lyophilized decellularized Wistar rat liver fragments (LDLFs), as well as we assessed the regenerative potential of the obtained ECM. We obtained decellularized liver of a Wistar rat, the vascular network and the main components of the ECM of tissue were preserved. H&E staining of histological sections confirmed the removal of cells. DNA content of ECM is equal to 0.7% of native tissue DNA content. Utilizing scanning probe nanotomogrphy method, we showed sinuous, rough topography and highly nanoporous structure of ECM, which provide high level of mouse 3T3 fibroblast and Hep-G₂cells biocompatibility. Obtained LDLF had a high regenerative potential, which we studied in an experimental model of a full-thickness rat skin wound healing: we observed the acceleration of wound healing by 2.2 times in comparison with the control.

Biomaterial-based cell delivery strategies to promote liver regeneration

Chronic liver disease and cirrhosis is a widespread and untreatable condition that leads to lifelong impairment and eventual death. The scarcity of liver transplantation options requires the development of new strategies to attenuate disease progression and reestablish liver function by promoting regeneration. Biomaterials are becoming an increasingly promising option to both culture and deliver cells to support in vivo viability and long-term function. There is a wide variety of both natural and synthetic biomaterials that are becoming established as delivery vehicles with their own unique advantages and disadvantages for liver regeneration. We review the latest developments in cell transplantation strategies to promote liver regeneration, with a focus on the use of both natural and synthetic biomaterials for cell culture and delivery. We conclude that future work will need to refine the use of these biomaterials and combine them with novel strategies that recapitulate liver organization and function in order to translate this strategy to clinical use.

Successful correction of factor V deficiency of patient-derived iPSCs by CRISPR/Cas9-mediated gene editing

BACKGROUND

Factor V (FV) deficiency is a monogenic inherited coagulation disorder considered to be an ideal indication for gene therapy. To investigate the possibility of therapeutic application of genome editing, we generated induced pluripotent stem cells (iPSCs) from a FV-deficient patient and repaired the mutation of factor V gene (F5) using a clustered regularly interspaced short palindromic repeats (CRISPR)/CRISPR-associated 9 (Cas9).

METHODS

The patient's peripheral blood mononuclear cells were reprogrammed for iPSCs. The targeting vector was designed with homology arms against F5 containing the corrected sequence. Cas9 ribonucleoprotein (RNP) complex and targeting vector were electroporated into iPSCs. Gene-edited iPSCs were differentiated into hepatocyte-like cells (HLCs).

RESULTS

The mutation of F5 in patient-derived iPSCs was repaired by CRISPR/Cas9. In concentrated culture supernatants of patient-derived iPS-HLCs, neither FV antigen nor activity was detected, while in those of gene-corrected iPS-HLCs, FV antigen and specific activity were 67.0 ± 13.1 ng/mL and 173.2 ± 41.1 U/mg, respectively.

CONCLUSIONS

We successfully repaired the mutation of F5 using the CRISPR/Cas9 and confirmed the recovery of FV activity with gene-corrected iPS-HLCs. Gene-edited iPSCs are promising for elucidating the pathophysiology as well as for a modality of gene therapy.

Hepatic Differentiation of Stem Cells in 2D and 3D Biomaterial Systems

A critical shortage of donor livers for treating end-stage liver failure signifies the urgent need for alternative treatment options. Hepatocyte-like cells (HLC) derived from various stem cells represent a promising cell source for hepatocyte transplantation, liver tissue engineering, and development of a bioartificial liver assist device. At present, the protocols of hepatic differentiation of stem cells are optimized based on soluble chemical signals introduced in the culture medium and the HLC produced typically retain an immature phenotype. To promote further hepatic differentiation and maturation, biomaterials can be designed to recapitulate cell-extracellular matrix (ECM) interactions in both 2D and 3D configurations. In this review, we will summarize and compare various 2D and 3D biomaterial systems that have been applied to hepatic differentiation, and highlight their roles in presenting biochemical and physical cues to different stem cell sources.

Induction of Hepatic Regeneration in an Experimental Model Using Hepatocyte-Differentiated Mesenchymal Stem Cells

Mesenchymal stem cell (MSC)-based liver tissue engineering on nanofibrous scaffold holds great promise for cell-based therapy in liver injuries and end-stage liver failure treatments. MSCs were generated from umbilical cord blood. Hepatogenic differentiation was induced on two-dimensional (2D) and three-dimensional (3D) culture system and characterized by morphology, scanning electron microscopy, immunocytochemistry, and gene expression. Albumin and α-1 antitrypsin (AAT) in culture supernatants were measured. Differentiated cells were administered intravenous into a murine model of carbon tetra induced liver cirrhosis. After 12 weeks of injection, liver pathology was examined. The hepatogenic differentiated MSCs stained positively for albumin, alpha fetoprotein, HepPar1, cytokeratin 7 and 18, and OV6 with more mature cells, hexagonal in shape with central nuclei forming large sheets in groups in 3D culture system. AAT secretion and indocyanine green uptake were significantly increased in 3D system. In experimental model, MSC-3D treated group exhibited maximal restoration of liver architecture with absent septal fibrosis and marked improvement of alanine transaminase (ALT) and aspartate transaminase (AST), and mild increase in albumin. Both 3D and 2D culture system are effective in functional hepatogenic differentiation from MSCs and serve as a vehicle in liver tissue engineering. In vivo hepatogenic differentiation is more effective on 3D scaffold, with better functional recovery.

Advanced Biomaterials and Processing Methods for Liver Regeneration: State-of-the-Art and Future Trends

Liver diseases contribute markedly to the global burden of mortality and disease. The limited organ disposal for orthotopic liver transplantation results in a continuing need for alternative strategies. Over the past years, important progress has been made in the field of tissue engineering (TE). Many of the early trials to improve the development of an engineered tissue construct are based on seeding cells onto biomaterial scaffolds. Nowadays, several TE approaches have been developed and are applied to one vital organ: the liver. Essential elements must be considered in liver TE-cells and culturing systems, bioactive agents or growth factors (GF), and biomaterials and processing methods. The potential of hepatocytes, mesenchymal stem cells, and others as cell sources is demonstrated. They need engineered biomaterial-based scaffolds with perfect biocompatibility and bioactivity to support cell proliferation and hepatic differentiation as well as allowing extracellular matrix deposition and vascularization. Moreover, they require a microenvironment provided using conventional or advanced processing technologies in order to supply oxygen, nutrients, and GF. Herein the biomaterials and the conventional and advanced processing technologies, including cell-sheets process, 3D bioprinting, and microfluidic systems, as well as the future trends in these major fields are discussed.

A study of the differentiation of stem cells from human exfoliated deciduous teeth on 3D silk fibroin scaffolds using static and dynamic culture paradigms

Stem cells from human exfoliated deciduous teeth (SHED) are considered the best current source of human stem cells due to their ability to differentiate into multiple cell lineages. Dynamic co-culture systems can improve the culture environment, as they provide cells with signaling factors, extracellular matrixes, and cellular shear force, as well as enable the formation of heterotypic clusters. We seeded SHED in 3D silk fibroin porous scaffolds under static and dynamic cultures for 28 days, using the NIH3T3 cultivated medium as an induction agent. Many hepatospheres formed in these porous scaffolds, and cellular viability was shown to continually increase by MTT assays. Hepatic AFP and ALB gene expression, as well as glycogen storage, albumin secretion, and urea synthesis, were greater in cells in the 3D porous scaffold under a dynamic culture than in those cultured under 3D static culture and petri dish conditions. However, the 3D static culture is still superior to the traditional petri dish culture. The NIH3T3 cultivated medium can significantly induce hepatic differentiation of SHED, while the 3D dynamic culture system significantly enhances hepatic differentiation of SHED. This study provides alternative sources of hepatocytes for liver disease treatment.

Collagen modulates functional activity of hepatic cells inside alginate-galactosylated chitosan hydrogel microcapsules

To provide comparable hepatic tissue microenvironment and induce functional behavior for hepatocytes, galctosylated-chitosan (GC) as well as collagen (Col) was added to alginate microcapsule coated with extra layer of chitosan. Four different hydrogel groups of alginate/chitosan (AC); alginate-galactosylated chitosan/chitosan (AGC/C); alginate-collagen/chitosan (ACol/C); and alginate-galactosylated chitosan-collagen/chitosan (AGCCol/C) were prepared and characterized for physical properties such as porosity, swelling, degradation rate, and stiffness. Introduction of GC as well as Col to alginate regulated significantly the physical properties of the resultant hydrogels. GC addition decreased dramatically swelling, degradation, pore size and mechanical properties of the resultant hydrogel. However, the influence of GC on the physical properties in the presence of Col (AGCCol/A) was in a reverse manner, as compared to the AGC/C hydrogel. The AGCCol/C microenvironment also promoted proliferation of microencapsulated HepG2 cells, as a model of hepatocyte, compared to the control-matched groups. Biochemical analysis after 10 days revealed a superior effect of AGCCol/C on the secretion of albumin and urea compared to other groups (P < 0.05). These features were coincided with the mRNA up-regulation of P450 and albumin in the AGCCol/C groups compared to the AGC/C and ACol/C groups (P < 0.05). The study demonstrated that enrichment of alginate-based hydrogels with Col and GC could be touted as an appropriate 3D platform for modular hepatic tissue engineering.

Biomimetic Polymer-Based Engineered Scaffolds for Improved Stem Cell Function

Scaffolds are considered promising materials for tissue engineering applications due to their unique physiochemical properties. The high porosity and adequate mechanical properties of the scaffolds facilitate greater cell adhesion, proliferation, and differentiation. Stem cells are frequently applied in tissue engineering applications due to their excellent potential. It has been noted that cell functions are profoundly affected by the nature of the extracellular matrix (ECM). Naturally derived ECM contains the bioactive motif that also influences the immune response of the organism. The properties of polymer scaffolds mean they can resemble the native ECM and can regulate cellular responses. Various techniques such as electrospinning and 3D printing, among others, are frequently used to fabricate polymer scaffolds, and their cellular responses are different with each technique. Furthermore, enhanced cell viability, as well as the differentiation ability of stem cells on the surface of scaffolds, opens a fascinating approach to the formation of ECM-like environments for tissue engineering applications.

Effect of passaging on the stemness of infrapatellar fat pad‑derived stem cells and potential role of nucleostemin as a prognostic marker of impaired stemness

Infrapatellar fat pad‑derived stem cells (IFPSCs) are emerging as an alternative to adipose tissue‑derived stem cells (ADSCs) from other sources. They are a reliable source of autologous stem cells obtained from medical waste that are suitable for use in cell‑based therapy, tissue engineering and regenerative medicine. Such clinical applications require a vast number of high‑quality IFPSCs. Unlike embryonic stem cells (ESCs), ADSCs and IFPSCs have limited population doubling capacity; however, in vitro expansion of primary IFPSCs through multiple passages (referred to as P) is a crucial step to acquire the desired population of cells. The present study investigated the effect of multiple passages on the stemness of IFPSCs during expansion and the possibility of predicting the loss of stemness using certain markers. IFPSCs were isolated from infrapatellar fat pad tissue resected during knee arthroplasty performed on aged patients (>65 years old). These cells from the stromal vascular fraction were serially passaged to at least to P7, and their stemness characteristics were examined at each passage. It was observed that IFPSCs maintained their spindle‑shaped morphology, self‑renewability and homogeneity at P2‑4. Furthermore, immunostaining revealed that these cells expressed mesenchymal stem cell (CD166, CD90 and CD105) and ESC markers [Sox2, Nanog, Oct4 and nucleostemin (NS)], whereas the hematopoietic stem cell marker CD45 was absent. These cells were also able to differentiate into the three germ layer cell types, thus confirming their ability to generate clinical grade cells. The findings indicated that prolonged culture of IFPSCs (P>6) led to the loss of the stem cell proliferative marker NS, with an increased population doubling time and progression toward neuronal differentiation, acquiring a neurogenic phenotype. Additionally, IFPSCs demonstrated an inherent ability to secrete neurotrophic factors and express receptors for these factors, which is the cause of neuronal differentiation at later passages. Therefore, these findings validated NS as a prognostic indicator for impaired stemness and identified IFPSCs as a promising source for cell‑based therapy, particularly for neurodegenerative diseases.

An innovative bioresorbable gelatin based 3D scaffold that maintains the stemness of adipose tissue derived stem cells and the plasticity of differentiated neurons

Neural tissue engineering aims at producing a simulated environment using a matrix that is suitable to grow specialized neurons/glial cells pertaining to CNS/PNS which replace damaged or lost tissues. The primary goal of this study is to design a compatible scaffold that supports the development of neural-lineage cells which aids in neural regeneration. The fabricated, freeze-dried scaffolds consisted of biocompatible, natural and synthetic polymers: gelatin and polyvinyl pyrrolidone. Physiochemical characterization was carried out using Fourier Transform Infrared Spectroscopy (FT-IR) and Scanning Electron Microscopy (SEM) imaging. The 3D construct retains good swelling proficiency and holds the integrated structure that supports cell adhesion and proliferation. The composite of PVP-gelatin is blended in such a way that it matches the mechanical strength of the brain tissue. The cytocompatibility analysis shows that the scaffolds are compatible and permissible for the growth of both stem cells as well as differentiated neurons. A change in the ratios of the scaffold components resulted in varied sizes of pores giving diverse surface morphology, greatly influencing the properties of the neurons. However, there is no change in stem cell properties. Different types of neurons are characterized by the type of gene associated with the neurotransmitter secreted by them. The change in the neuron properties could be attributed to neuroplasticity. The plasticity of the neurons was analyzed using quantitative gene expression studies. It has been observed that the gelatin-rich construct supports the prolonged proliferation of stem cells and multiple neurons along with their plasticity.

Technological advancements for the development of stem cell-based models for hepatotoxicity testing

Stem cells are characterized by their self-renewal capacity and their ability to differentiate into multiple cell types of the human body. Using directed differentiation strategies, stem cells can now be converted into hepatocyte-like cells (HLCs) and therefore, represent a unique cell source for toxicological applications in vitro. However, the acquired hepatic functionality of stem cell-derived HLCs is still significantly inferior to primary human hepatocytes. One of the main reasons for this is that most in vitro models use traditional two-dimensional (2D) setups where the flat substrata cannot properly mimic the physiology of the human liver. Therefore, 2D-setups are progressively being replaced by more advanced culture systems, which attempt to replicate the natural liver microenvironment, in which stem cells can better differentiate towards HLCs. This review highlights the most recent cell culture systems, including scaffold-free and scaffold-based three-dimensional (3D) technologies and microfluidics that can be employed for culture and hepatic differentiation of stem cells intended for hepatotoxicity testing. These methodologies have shown to improve in vitro liver cell functionality according to the in vivo liver physiology and allow to establish stem cell-based hepatic in vitro platforms for the accurate evaluation of xenobiotics.

Micro and ultrastructural changes monitoring during decellularization for the generation of a biocompatible liver

Decellularization of a whole organ is an attractive process that has been used to create 3D scaffolds structurally and micro-architecturally similar to the native one. Currently used decellularization protocols exhibit disrupted extracellular matrix (ECM) structure and denatured ECM proteins. Therefore, maintaining a balance between ECM preservation and cellular removal is a major challenge. The aim of this study was to optimize a multistep Triton X-100 based protocol (either using Triton X-100/ammonium hydroxide mixture alone or after its modification with DNase, sodium dodecyl sulfate or trypsin) that could achieve maximum decellularization with minimal liver ECM destruction suitable for subsequent organ implantation without immune rejection. Based on our findings, Triton X-100 multistep protocol was insufficient for whole liver decellularization and needed to be modified with other detergents. Among all Triton X-100 modified protocols, a Triton X-100/DNase-based one was considered the most suitable. It maintains a gradual but sufficient removal of cells to generate decellularized biocompatible liver scaffolds without any significant alteration to ECM micro- and ultra-structure.

Ectopic expression of factor VIII in MSCs and hepatocytes derived from rDNA targeted hESCs

Hemophilia A is an X-linked recessive bleeding disorder caused by FVIII gene deficiency, which may result in spontaneous joint hemorrhages or life-threatening bleeding. Currently, cell-based gene therapy via ex vivo transduction of transplantable cells with integrating gene-expressing vectors offers an attractive treatment for HA. In present study, we targeted an expression cassette of B-domain-deleted FVIII into the ribosomal DNA (rDNA) locus of human embryonic stem cells (hESCs) by transfection with a nonviral targeting plasmid pHrn. The targeted hESCs clone could be expanded and retained the main pluripotent properties of differentiation into three germ layers both in vitro and in vivo. Importantly, under defined induction conditions, the targeted hESCs could differentiated into functional mesenchymal stem cells (MSCs) and hepatocytes, as validated by relevant specific cell markers and functional examination. Tumorgenesis assay demonstrated that these cells are relatively safe for future applications. Analysis on gene expression revealed that exogenous FVIII mRNA and FVIII proteins were both present in differentiated MSCs and hepatocytes. These results indicated that through gene targeting at hESCs rDNA locus a persistent cell source of transplantable genetic-modified cells can be accomplished for HA therapy.

PLGA-based nanofibers with a biomimetic polynoradrenaline sheath for rapid in vivo sampling of tetrodotoxin and sulfonamides in pufferfish

PLGA nanofibers with PNA sheath modification achieve enhanced extraction performance and antibiofouling capacity for in vivo sampling in pufferfish.

Hepatogenic Supported Differentiation of Mesenchymal Stem Cells in a Lactobionic Acid-Conjugated Thermogel

To investigate the effect of receptor substrate of target cells on stem cell differentiation, lactobionic acid-conjugated poly[(propylene glycol)-b-(ethylene glycol)-b-(propylene glycol)]-poly(l-alanine) (LB-PLX-PA) was synthesized, and then thermogelling systems consisting of LB-PLX-PA and PLX-PA in a ratio of 0/100 (LB-0), 5/95 (LB-5), and 20/80 (LB-20) were constructed as an injectable three-dimensional scaffold toward hepatogenic differentiation of tonsil-derived mesenchymal stem cells (TMSCs). Modulus of LB-0, LB-5, and LB-20 increased to 500-800 Pa at 37 °C (gel) due to the heat induced sol-to-gel transition of the systems during which TMSCs were incorporated into the gel. Based on biomarker expressions and hepatic biofunctions of the differentiated cells, the receptor substrate (LB)-conjugated bioactive thermogel provides compatible microenvironments for the differentiated cells, and thus gives pronounced positive results on the differentiation of the stem cells into target cells during three-dimensional culture, compared with a passive thermogel.

Electrospun Fibers for Recruitment and Differentiation of Stem Cells in Regenerative Medicine

Electrospinning is a popular technique used to mimic the natural sub-micron features of the native tissue. The ultra-fine fibers provide a favorable extracellular matrix-like environment for regulation of cellular functions. This article summarizes and reviews the current advances in electrospun fiber application and focuses on the novel strategies applied for tissue regeneration and repair. It explores the different factors affecting the attachment and proliferation of mesenchymal stem cells (MSCs) on the electrospun substrates. The influence of different features of electrospun fibers in the differentiation of MSCs into specific lineages (bone, cartilage, tendon/ligament, and nerves) has been elaborated. In addition, the different techniques to mimic the hierarchical features of tissues and its effect on cellular functions are reviewed. Additionally, the new developments like three-dimensional (3D) electrospinning, 3D spheroid double strategy and the comparative analysis of dynamic and static culture on electrospun scaffolds are discussed. With the intricate understanding of the interaction between the cells and the electrospun fiber matrix we can aim to combine the newer strategies to overcome the existing challenges and improve the potential application of electrospun fibers in the field of tissue regeneration and repair.

Differentiation Potential of Breast Milk-Derived Mesenchymal Stem Cells into Hepatocyte-Like Cells

Human breast milk stem cells (hBSCs) contain a population of cells with the ability to differentiate into various cell lineages for cell therapy applications. The current study examined the differentiation potential of hBSCs into hepatocytes-like cells. The cells were isolated from the breast milk and were treated with hepatogenic medium containing hepatocyte growth factor, insulin-like growth factor and dexamethasone for 7 days subsequently; Oncostatin M was added to the culture media. RT-PCR and immunocytochemistry were performed to detect the hepatogenic markers. The glycogen storage and the ability of the cells to absorb and release indocynanin green were also tested. The data showed that most of the differentiated cells formed cell aggregates after the 30th day, with more cells accumulated to form spheroids. RT-PCR revealed the expression of the hepatic nuclear factor, albumin, cytokeratin 18 and 19, cytochrome P2B6, glucose-6-phospahtase and claudin. The functional assays also showed glycogen storage and omission of indicynine green. Our study demonstrated hBSCs are novel population that can differentiate into hepatocyte-like cells.

The enhancement of differentiating adipose derived mesenchymal stem cells toward hepatocyte like cells using gelatin cryogel scaffold

Liver tissue engineering creates a promising methodology for developing functional tissue to restore or improve the function of lost or damaged liver by using appropriate cells and biologically compatible scaffolds. The present paper aims to study the hepatogenic potential of human adipose derived mesenchymal stem cells (hADSCs) on a 3D gelatin scaffold in vitro. For this purpose, mesenchymal stem cells were isolated from human adipose tissue and characterized by flowcytometry analysis and mesodermal lineage differentiation capacity. Then, porous cryogel scaffolds were fabricated by cryogelating the gelatin using glutaraldehyde as the crosslinking agent. The structure of the scaffolds as well as the adhesion and proliferation of the cells were then determined by Scanning Electron Microscopy (SEM) analysis and MTT assay, respectively. The efficiency of hepatic differentiation of hADSCs on 2D and 3D culture systems has been assessed by means of morphological, cytological, molecular and biochemical approaches. Based on the results of flowcytometry, the isolated cells were positive for hMSC specific markers and negative for hematopoietic markers. Further, the multipotency of these cells was confirmed by adipogenic and osteogenic differentiation and the highly porous structure of scaffolds was characterized by SEM images. Biocompatibility was observed in the fabricated gelatin scaffolds and the adhesion and proliferation of hADSCs were promoted without any cytotoxicity effects. In addition, compared to 2D TCPS, the fabricated scaffolds provided more appropriate microenvironment resulting in promoting the differentiation of hADSCs toward hepatocyte-like cells with higher expression of hepatocyte-specific markers and appropriate functional characteristics such as increased levels of urea biosynthesis and glycogen storage. Finally, the created 3D gelatin scaffold could provide an appropriate matrix for hepatogenic differentiation of hADSCs, which could be considered for liver tissue engineering applications.

Injectable Polypeptide Thermogel as a Tissue Engineering System for Hepatogenic Differentiation of Tonsil-Derived Mesenchymal Stem Cells

A poly(ethylene glycol)-b-poly(l-alanine) (PEG-l-PA) hydrogel incorporating tonsil-derived mesenchymal stem cells (TMSCs), tauroursodeoxycholic acid (TUDCA), hepatocyte growth factor (HGF), and fibroblast growth factor 4 (FGF4) was prepared through thermal gelation of an aqueous polymer solution for an injectable tissue engineering application. The thermal gelation accompanied conformational changes of both PA and PEG blocks. The gel modulus at 37 °C was controlled to be 1000 Pa by using a 14.0 wt % aqueous polymer solution. The gel preserved its physical integrity during the 3D culture of the cells. TUDCA, HGF, and FGF4 were released from the PEG-l-PA hydrogel over 21 days of the 3D cell culture period. TMSCs initially exhibited a spherical shape, whereas some fibers protruded from the cells on days 14-21 of 3D culture. The injectable system exhibited pronounced expressions of the hepatic biomarkers at both mRNA and protein levels, which are significantly better than the commercially available hyaluronic acid gel. In particular, the hepatogenically differentiated cells from the TMSCs in the injectable system demonstrated hepatic biofunctions comparable to HepG2 cells for the uptakes of low density lipoproteins (52%) and indocyanine green (76%), and the production of albumin (40%) and urea (52%), which are also significantly better than the 3D-cultured cells in the commercially available hyaluronic acid gel. Our studies suggest that the PEG-l-PA thermogel incorporating TMSCs, TUDCA, and growth factors is highly promising as an in situ forming tissue engineering system.

Synthesis and Fabrication of Collagen-Coated Ostholamide Electrospun Nanofiber Scaffold for Wound Healing

A novel scaffold for effective wound healing treatment was developed utilizing natural product bearing collagen-based biocompatible electrospun nanofibers. Initially, ostholamide (OSA) was synthesized from osthole (a natural coumarin), characterized by ¹H, ¹³C, DEPT-135 NMR, ESI-MS, and FT-IR spectroscopy analysis. OSA was incorporated into polyhydroxybutyrate (PHB) and gelatin (GEL), which serve as templates for electrospun nanofibers. The coating of OSA-PHB-GEL nanofibers with collagen resulted in PHB-GEL-OSA-COL nanofibrous scaffold which mimics extracellular matrix and serves as an effective biomaterial for tissue engineering applications, especially for wound healing. PHB-GEL-OSA-COL, along with PHB-GEL-OSA and collagen film (COLF), was characterized in vitro and in vivo to determine its efficacy. The developed PHB-GEL-OSA-COL nanofibers posed an impressive mechanical stability, an essential requirement for wound healing. The presence of OSA had contributed to antimicrobial efficacy. These scaffolds exhibited efficient antibacterial activity against common wound pathogens, Pseudomonas aeruginosa (P. aeruginosa) and Staphylococcus aureus (S. aureus). The zones of inhibition were observed to be 14 ± 22 and 10 ± 2 mm, respectively. It was observed that nanofibrous scaffold had the ability to release OSA in a controlled manner, and hence, OSA would be present at the site of application and exhibit bioactivity in a sustained manner. PHB-GEL-OSA-COL nanofiber was determined to be stable against enzymatic degradation, which is the most important parameter for promoting proliferation of cells contributing to repair and remodeling of tissues during wound healing applications. As hypothesized, PHB-GEL-OSA-COL was observed to imbibe excellent cytocompatibility, which was determined using NIH 3T3 fibroblast cell proliferation studies. PHB-GEL-OSA-COL exhibited excellent wound healing efficacy which was confirmed using full thickness excision wound model in Wistar rats. The rats treated with PHB-GEL-OSA-COL nanofibrous scaffold displayed enhanced healing when compared to untreated control. Both in vitro and in vivo analysis of PHB-GEL-OSA-COL presents a strong case of therapeutic biomaterial suiting wound repair and regeneration.

Proliferation and osteogenic differentiation of amniotic fluid-derived stem cells

The osteogenic differentiation of stem cells.

Biomaterials and Culture Technologies for Regenerative Therapy of Liver Tissue

Regenerative approach has emerged to substitute the current extracorporeal technologies for the treatment of diseased and damaged liver tissue. This is based on the use of biomaterials that modulate the responses of hepatic cells through the unique matrix properties tuned to recapitulate regenerative functions. Cells in liver preserve their phenotype or differentiate through the interactions with extracellular matrix molecules. Therefore, the intrinsic properties of the engineered biomaterials, such as stiffness and surface topography, need to be tailored to induce appropriate cellular functions. The matrix physical stimuli can be combined with biochemical cues, such as immobilized functional groups or the delivered actions of signaling molecules. Furthermore, the external modulation of cells, through cocultures with nonparenchymal cells (e.g., endothelial cells) that can signal bioactive molecules, is another promising avenue to regenerate liver tissue. This review disseminates the recent approaches of regenerating liver tissue, with a focus on the development of biomaterials and the related culture technologies.

3D engineered In vitro hepatospheroids for studying drug toxicity and metabolism

Drug toxicity is one of the reasons for late stage drug attrition, because of hepatotoxicity. Various in vitro liver models like primary human hepatocytes, immortalized human hepatic cell lines, liver slices and microsomes have been used; but limited by viability, hepatic gene expression and function. The 3D-engineered construct of hepatocyte-like-cells (HLCs) differentiated from stem cells, may provide a limitless source of hepatocytes with improved reproducibility. Towards this end, we used hepatospheroids (diameter=50-80μm) differentiated from human-umbilical-cord-mesenchymal stem cells (hUC-MSCs) on 3D scaffold GEVAC (Gelatin-vinyl-acetate-copolymer) as in vitro model for studying drug metabolism/toxicity. Our data demonstrated that hUC-MSCs-derived-hepatospheroids cultured on GEVAC expressed significantly higher drug-metabolizing enzymes (CYPs) both at mRNA and activity level compared to 2D culture, using HR-LC/MS. We further showed that hepatospheroids convert phenacetin (by CYP1A2) and testosterone (by CYP3A4) to their human-specific metabolites acetaminophen and 6β-hydroxytestosterone with a predictive clearance rate of 0.011ml/h/10⁶ cells and 0.021ml/h/10⁶ cells respectively, according to first-order kinetics. Hepatotoxicity was confirmed by exposing hepatospheroids to ethanol and acetaminophen; ROS generation, cell viability, cytoskeleton structure, elevation of liver function enzymes, i.e. AST and ALT, was analyzed. To the best of our knowledge, this is the first report to use hUC-MSCs-derived-hepatospheroids on GEVAC as in vitro model for drug metabolism/toxicity study; which can replace the conventional 2D-models used in drug development.

A Patient-Inspired Ex Vivo Liver Tissue Engineering Approach with Autologous Mesenchymal Stem Cells and Hepatogenic Serum

Design and development of ex vivo bioengineered liver tissue substitutes intended for subsequent in vivo implantation has been considered therapeutically relevant to treat many liver diseases that require whole-organ replacement on a long-term basis. The present study focus on patient-inspired ex vivo liver tissue engineering strategy to generate hepatocyte-scaffold composite by combining bone marrow mesenchymal stem cells (BMSCs) derived from cardiac failure patients with secondary hyperbilirubinemia as primers of hepatic differentiation and hepatocyte growth factor (HGF)-enriched sera from same individuals as hepatic inducer. A biodegradable and implantable electrospun fibrous mesh of poly-l-lactic acid (PLLA) and gelatin is used as supporting matrix (average fiber diameter = 285 ± 64 nm, porosity = 81 ± 4%, and average pore size = 1.65 ± 0.77 μm). The fibrous mesh supports adhesion, proliferation, and hepatic commitment of patient-derived BMSCs of adequate stemness using HGF-enriched sera generating metabolically competent hepatocyte-like cells, which is comparable to the hepatic induction with defined recombinant growth factor cocktail. The observed results confirm the combinatorial effects of nanofiber topography and biochemical cues in guiding hepatic specification of BMSCs. The fibrous mesh-hepatocyte construct developed in this study using natural growth factors and BMSCs of same individual is promising for future therapeutic applications in treating damaged livers.

Investigation of synergistic effects of inductive and conductive factors in gelatin-based cryogels for bone tissue engineering

Macroporous and biocompatible scaffolds for bone tissue engineering were prepared from 4% gelatin (G) and 4% gelatin/2% nanohydroxyapatite (nHAP), (GN), by cryogelation. The cryogels have interconnected pores with pore size around 100 μm and a high degree of cross-linking. The incorporation of nHAP slightly reduced the porosity, degree of crosslinking, swelling kinetics and equilibrium water uptake, but enhanced the toughness of the cryogel scaffolds. The osteo-regeneration potential of GN cryogels was further enhanced by binding with bone morphogenetic protein (BMP-2) to produce the gelatin/nHAP/BMP-2 (GNB) scaffold. The efficacy of BMP-2 incorporation was tested through in vitro release studies and a sustained release profile could be observed from the cumulative BMP-2 release curve. To elucidate the effect of cryogel composition on cell proliferation and differentiation, rabbit adipose-derived stem cells (ADSCs) were seeded in cryogel scaffolds. In vitro studies demonstrated a reduced proliferation rate and enhanced osteogenic differentiation of ADSCs in GNB cryogel scaffolds from the combined effect of nHAP and BMP-2, judging from the elevated alkaline phosphatase activity and the degree of mineralization. Confocal microscopy confirmed high viability and good cytoskeletal spreading of ADSCs on cryogels while osteocalcin (OCN) protein quantification affirmed the dominance of GNB in the osteogenic differentiation of ADSCs compared to G and GN cryogels. The maximum osteogenesis capability of GNB was also confirmed through the up-regulation of specific bone maker genes of early marker protein collagen I (COL I) and late marker protein osteopontin (OPN). From an in vivo animal model, computed tomography analysis confirmed the superior bone regeneration capability of ADSCs in GNB cryogels by implanting ADSCs/GNB cryogel constructs in rabbit calvarial critical size defects. Histological and immunohistochemical analysis demonstrated new bone formation and continued expression of COL I and OCN bone-specific proteins at the defect site. Taken together, the results demonstrate that G cryogels modified with osteo-conductive nHAP and osteo-inductive BMP-2 could provide cues to synergistically promote the osteogenesis of ADSCs in vitro and in vivo.

Multidimensional nanofibrous scaffolds of poly(lactide-co-caprolactone) and poly(ethyl oxazoline) with improved features for cardiac tissue engineering

Aim: The aim of the study is to develop scaffolds that mimic native tissue properties for effective regeneration of the myocardium, which is affected by the gradual thinning of left ventricular tissue after an infarction. Materials & methods: Heterogenous nanofibrous scaffolds made of poly(lactide-co-caprolactone) and poly(ethyl oxazoline) were characterized for physico-chemical properties. The biocompatibility of the scaffolds was evaluated by studying the adhesion, proliferation and differentiation of H9c2 cells. Results: The scaffolds mimic the cardiac extracellular matrix and showed enhanced tensile strength, improved cell compatibility along with the expression of cardiac marker proteins. Conclusion: Our experimental data confirmed the importance of native tissue architecture and mechanical strength for improved cell response in cardiac tissue engineering.

Aseptic Raman spectroscopy can detect changes associated with the culture of human dental pulp stromal cells in osteoinductive culture

There is an unmet need for the non-invasive characterisation of stem cells to facilitate the translation of cell-based therapies. Raman spectroscopy has proven utility in stem cell characterisation but as yet no method has been reported capable of taking repeated Raman measurements of living cells aseptically over time. The aim of this study was to determine if Raman spectroscopy could be used to monitor changes in a well characterised cell population (human dental pulp stromal cells (DPSCs)) by taking repeated Raman measurements from the same cell populations in osteoinductive culture over time and under aseptic conditions. DPSCs were isolated from extracted premolar teeth from 3 consenting donors. Following in vitro expansion, DPSCs were maintained for 28 days in osteo-inductive medium. Raman spectra were acquired from the cells at days 0, 3, 7, 10, 14 and 28. Principal component analysis (PCA) was carried out to assess if there was any temporal spectral variation. At day 28, osteoinduction was confirmed using alizarin red staining and qRT-PCR for alkaline phosphatase and osteocalcin. Alizarin red staining was positive in all samples at day 28 and significant increases in alkaline phosphatase (p < 0.001) and osteocalcin (p < 0.05) gene expression were also observed compared with day 0. PCA of the Raman data demonstrated trends in PC1 from days 0-10, influenced by protein associated features and PC2 from days 10-28, influenced by DNA/RNA associated features. We conclude that spectroscopy can be used to monitor changes in Raman signature with time associated with the osteoinduction of DPSCs using repeated measurements via an aseptic methodology.

Biomimetic approaches for cell implantation to the restoration of infarcted myocardium

Compelling evidences accumulated over the years have proven stem cells as a promising source for regenerative medicine. However, the inadequacy with the design of delivery modalities has prolonged the research in realizing an ideal cell-based approach for the regeneration of infarcted myocardium. Currently, some modest improvements in cardiac function have been documented in clinical trials with stem cell treatments, although regenerating a fully functional myocardium remains a dream for cardiac surgeons. This review provides an overview on the significance of stem cell therapy, the current attempts to resolve the drawbacks with the cell implantation approach and the various stratagems adopted with electrospun hybrid nanofibers for implementation in myocardial regenerative therapy.

In vivo hepatogenic capacity and therapeutic potential of stem cells from human exfoliated deciduous teeth in liver fibrosis in mice

INTRODUCTION

Liver transplantation is a gold standard treatment for intractable liver diseases. Because of the shortage of donor organs, alternative therapies have been required. Due to their potential to differentiate into a variety of mature cells, stem cells are considered feasible cell sources for liver regeneration. Stem cells from human exfoliated deciduous teeth (SHED) exhibit hepatogenic capability in vitro. In this study, we investigated their in vivo capabilities of homing and hepatocyte differentiation and therapeutic efficacy for liver disorders in carbon tetrachloride (CCl4)-induced liver fibrosis model mice.

METHODS

We transplanted SHED into CCl4-induced liver fibrosis model mice through the spleen, and analyzed the in vivo homing and therapeutic effects by optical, biochemical, histological, immunological and molecular biological assays. We then sorted human leukocyte antigen-ABC (HLA-ABC)-positive cells from primary CCl4-damaged recipient livers, and analyzed their fusogenicity and hepatic characteristics by flow cytometric, genomic DNA, hepatocyte-specific gene assays. Furthermore, we examined the treatment effects of HLA-positive cells to a hepatic dysfunction by a secondary transplantation into CCl4-treated mice.

RESULTS

Transplanted SHED homed to recipient livers, and expressed HLA-ABC, human hepatocyte specific antigen hepatocyte paraffin 1 and human albumin. SHED transplantation markedly recovered liver dysfunction and led to anti-fibrotic and anti-inflammatory effects in the recipient livers. SHED-derived HLA-ABC-positive cells that were sorted from the primary recipient liver tissues with CCl4 damage did not fuse with the host mouse liver cells. Sorted HLA-positive cells not only expressed human hepatocyte-specific genes including albumin, cytochrome P450 1A1, fumarylacetoacetase, tyrosine aminotransferase, uridine 5'-diphospho-glucuronosyltransferase, transferrin and transthyretin, but also secreted human albumin, urea and blood urea nitrogen. Furthermore, SHED-derived HLA-ABC-positive cells were secondary transplanted into CCl4-treated mice. The donor cells homed into secondary recipient livers, and expressed hepatocyte paraffin 1 and human albumin, as well as HLA-ABC. The secondary transplantation recovered a liver dysfunction in secondary recipients.

CONCLUSIONS

This study indicates that transplanted SHED improve hepatic dysfunction and directly transform into hepatocytes without cell fusion in CCl4-treated mice, suggesting that SHED may provide a feasible cell source for liver regeneration.

Synthesis, characterization and biological evaluation of chromen and pyrano chromen-5-one derivatives impregnated into a novel collagen based scaffold for tissue engineering applications

The synthesis of novel chromen and pyrano chromen-5-one derivatives (CCN) has obtained in simple experimental method. The CCN and collagen based scaffold showed excellent biological properties to act as biomaterial in tissue engineering application.