Green Synthesis of Reduced Graphene Oxide Using the Tinospora cordifolia Plant Extract: Exploring Its Potential for Methylene Blue Dye Degradation and Antibacterial Activity

Graphene has attracted significant attention recently due to its unique mechanical, electrical, thermal, and optical properties. The present study focuses on synthesizing green rGO using the Tinospora cordifolia plant extract by mixing it in a suspension of graphene oxide. The plant extract of T. cordifolia acts as a reducing agent and is cost-effective, renewable, and eco-friendly. Green-synthesized rGO (G-rGO) was characterized using FTIR, HR-SEM, EDX, and HR-XRD analyses. G-rGO consists of nanosheets with an average width of approximately 30 nm. G-rGO has a range of hydrodynamic radius (270-470) nm and an average ζ potential of -29.9 mV. Further, G-rGO was used as a nanoadsorbent for optimal exclusion of methylene blue (MB) dye using the response surface methodology (RSM). Adsorption results confirmed 94.85% MB dye removal with 58.81 mg g-1 adsorption capacity at optimum conditions. The G-rGO's antibacterial activity was also tested against Staphylococcus aureus (Gram-positive) and Escherichia coli (Gram-negative) bacteria, finding the exhibited zone of inhibition of 10, 11, and 15 mm and 10, 13, and 17 mm at 20, 40, and 80 μg mL-1 concentrations of G-rGO, respectively.

Synthesis and characterization of magnetic Ag-Fe3O4@polymer hybrid nanocomposite systems with promising antibacterial application

INTRODUCTION

Bacterial infections caused by different strains of bacteria still one of the most important disorders affecting humans worldwide. Polymers nanocomposite systems could be considered as an alternative to conventional antibiotics to eradicate bacterial infections.

SIGNIFICANCE

In an attempt to enhance the antibacterial performance of silver and iron oxide nanoparticles, decrease their aggregation and toxicity, a polymeric hybrid nanocomposite system combining both nanoparticles is produced.

METHODS

Magnetic Ag-Fe3O4@polymer hybrid nanocomposites prepared using different polymers, namely polyethylene glycol 4000, ethyl cellulose, and chitosan were synthesized via wet impregnation and ball-milling techniques. The produced nanocomposites were tested for their physical properties and antibacterial activities.

RESULTS

XRD, FT-IR, VSM, and TEM results confirmed the successful preparation of hybrid nanocomposites. Hybrid nanocomposites have average crystallite sizes in the following order Ag-Fe3O4@CS (8.9 nm) < Ag-Fe3O4@EC (9.0 nm) < Ag-Fe3O4@PEG4000 (9.4 nm) and active surface area of this trend Ag-Fe3O4@CS (130.4 m2g-1) > Ag-Fe3O4@EC (128.9 m2g-1) > Ag-Fe3O4@PEG4000 (123.4 m2g-1). In addition, they have a saturation magnetization in this order: Ag-Fe3O4@PEG4000 (44.82 emu/g) > Ag-Fe3O4@EC (40.14 emu/g) > Ag-Fe3O4@CS (22.90 emu/g). Hybrid nanocomposites have a pronounced antibacterial action against Bacillus cereus, Escherichia coli, Pseudomonas aeruginosa, and Staphylococcus intermedius compared to iron oxide nanoparticles and positive antibacterial drug. In addition, both Ag-Fe3O4@EC and Ag-Fe3O4@CS have a lower MIC values compared to Ag-Fe3O4@PEG and positive control.

CONCLUSION

Magnetic Ag-Fe3O4 hybrid nanocomposites could be promising antibacterial nanomaterials and could pave the way for the development of new materials with even more unique properties and applications.

Fe3O4/Au/porous Au nanohybrid for efficient delivery of doxorubicin as a model drug

Fe₃O₄/Au/porous Au nanohybrids being bi-functional nanoparticles with magnetic properties and high porosity, were synthesized and used for drug delivery. To achieve this purpose, after Fe₃O₄ nanoparticles synthesis, a gold layer coats them to increase their stability. Then, to improve the loading capacity of Fe₃O₄/Au nanoparticles, a shell of porous gold was synthesized on the Fe₃O₄/Au surface by creating an Ag-Au nanohybrid layer on Fe₃O₄/Au and dissolving the metallic silver atoms in HNO₃ (0.01 M). The DLS results show that the synthesized nanohybrid has an average size of 68.0 ± 7.7 nm and a zeta potential of - 28.1 ± 0.2 mV. Finally, doxorubicin (DOX), as a pharmaceutical agent, was loaded onto the Fe₃O₄/Au/porous Au nanohybrids. The prepared nano-drug enhanced the therapeutic efficacy of DOX on MCF-7 cancer cells compared to the free DOX. These results confirmed a 1.5 times improvement in the antitumor activity of DOX-loaded Fe₃O₄/Au/porous Au nanohybrids.

Interaction of doxorubicin delivered by superparamagnetic iron oxide nanoparticles with DNA

We studied the interaction of superparamagnetic iron oxide nanoparticles (SPIONs), covered by trisodium citrate, with doxorubicin (DOX) and DNA using the spectrophotometric method. We calculated the binding parameters in the binary (DOX-SPION and SPION-DNA) and the ternary (DOX-SPION-DNA) systems. Our studies showed that the nanoparticles do not interact with DNA. We also observed that one nanoparticle loads rather a large number of DOX molecules with a quite high binding constant value (kDOX-SPION = 1.2 × 104 M-1). The DNA addition to the DOX-SPION system induces DOX release from the SPION surface and the formation of DOX-DNA complexes. The presence of nanoparticles has almost no effect on the constant of doxorubicin binding to DNA (kDOX-DNA ≈ 3 × 104 M-1). At high DNA concentrations, almost all DOX molecules bind to DNA. Accordingly, the use of SPIONs as DOX carriers does not require an increased drug dose to achieve a therapeutic effect. Thus, SPIONs are perspective nanocarriers for DOX delivery.

SPIONs Conjugate Supported Anticancer Drug Doxorubicin's Delivery: Current Status, Challenges, and Prospects

Considerable efforts have been directed towards development of nano-structured carriers to overcome the limitations of anticancer drug, doxorubicin's, delivery to various cancer sites. The drug's severe toxicity to cardio and hepatic systems, low therapeutic outcomes, inappropriate dose-demands, metastatic and general resistance, together with non-selectivity of the drug have led to the development of superparamagnetic iron oxide nanoparticles (SPIONs)-based drug delivery modules. Nano-scale polymeric co-encapsulation of the drug, doxorubicin, with SPIONs, the SPIONs surface end-groups' cappings with small molecular entities, as well as structural modifications of the SPIONs' surface-located functional end-groups, to attach the doxorubicin, have been achieved through chemical bonding by conjugation and cross-linking of natural and synthetic polymers, attachments of SPIONs made directly to the non-polymeric entities, and attachments made through mediation of molecular-spacer as well as non-spacer mediated attachments of several types of chemical entities, together with the physico-chemical bondings of the moieties, e.g., peptides, proteins, antibodies, antigens, aptamers, glycoproteins, and enzymes, etc. to the SPIONs which are capable of targeting multiple kinds of cancerous sites, have provided stable and functional SPIONs-based nano-carriers suitable for the systemic, and in vitro deliveries, together with being suitable for other biomedical/biotechnical applications. Together with the SPIONs inherent properties, and ability to respond to magnetic resonance, fluorescence-directed, dual-module, and molecular-level tumor imaging; as well as multi-modular cancer cell targeting; magnetic-field-inducible drug-elution capacity, and the SPIONs' magnetometry-led feasibility to reach cancer action sites have made sensing, imaging, and drug and other payloads deliveries to cancerous sites for cancer treatment a viable option. Innovations in the preparation of SPIONs-based delivery modules, as biocompatible carriers; development of delivery route modalities; approaches to enhancing their drug delivery-cum-bioavailability have explicitly established the SPIONs' versatility for oncological theranostics and imaging. The current review outlines the development of various SPIONs-based nano-carriers for targeted doxorubicin delivery to different cancer sites through multiple methods, modalities, and materials, wherein high-potential nano-structured platforms have been conceptualized, developed, and tested for, both, in vivo and in vitro conditions. The current state of the knowledge in this arena have provided definite dose-control, site-specificity, stability, transport feasibility, and effective onsite drug de-loading, however, with certain limitations, and these shortcomings have opened the field for further advancements by identifying the bottlenecks, suggestive and plausible remediation, as well as more clear directions for future development.

Nanomagnet-facilitated pharmaco-compatibility for cancer diagnostics: Underlying risks and the emergence of ultrasmall nanomagnets

Cancer therapy is a fast-emerging biomedical paradigm that elevates the diagnostic and therapeutic potential of a nanovector for identification, monitoring, targeting, and post-treatment response analysis. Nanovectors of superparamagnetic iron oxide nanoparticles (SPION) are of tremendous significance in cancer therapy because of their inherited high surface area, high reactivity, biocompatibility, superior contrast, and magnetic and photo-inducibility properties. In addition to a brief introduction, we summarize various progressive aspects of nanomagnets pertaining to their production with an emphasis on sustainable biomimetic approaches. Post-synthesis particulate and surface alterations in terms of pharmaco-affinity, liquid accessibility, and biocompatibility to facilitate cancer therapy are highlighted. SPION parameters including particle contrast, core-fusions, surface area, reactivity, photosensitivity, photodynamics, and photothermal properties, which facilitate diverse cancer diagnostics, are discussed. We also elaborate on the concept of magnetism to selectively focus chemotherapeutics on tumors, cell sorting, purification of bioentities, and elimination of toxins. Finally, while addressing the toxicity of nanomaterials, the advent of ultrasmall nanomagnets as a healthier alternative with superior properties and compatible cellular interactions is reviewed. In summary, these discussions spotlight the versatility and integration of multi-tasking nanomagnets and ultrasmall nanomagnets for diverse cancer theragnostics.

•

SPION synthesis with ascribed prominence on sustainable procedures.

•

Particulate species, composition, and surface alteration-enabled theragnostics are highlighted.

•

Inherent properties of SPIONs facilitating cancer diagnostics are elaborated.

•

Magnetism-based “chemotherapeutics,” cell-sorting, and bioentity purification are emphasized.

•

Emergence of ultrasmall SPIONs as a healthier option is summarized.

Development of a pH-sensitive functionalized metal organic framework: in vitro study for simultaneous delivery of doxorubicin and cyclophosphamide in breast cancer

Exploration of an efficient dual-drug based nanocarrier with high drug loading capacity, specific targeting properties, and long-term stability is highly desirable in cancer therapy. Metal-organic frameworks (MOFs) have proven to be a promising class of drug carriers due to their high porosity, crystalline properties with defined structure information, and their potential for further functionalization. To enhance the drug efficacy as well as to overcome the burst effect of drugs, here we synthesized a pH responsive folic acid (FA) and graphene oxide (GO) decorated zeolitical imidazolate frameworks-8 (GO-FA/ZIF-8), for targeted delivery of doxorubicin (DOX) and cyclophosphamide (CP), simultaneously. In this system, DOX molecules were encapsulated in the pores of ZIF-8 during in situ synthesis of ZIF-8 and CP molecules have been captured by the GO surface via hydrogen bonding and π-π interactions as well. Furthermore, the resulting pH-responsive nanocarrier (DOX@ZIF-8/GO-FA/CP) showed in vitro sustained release characteristics (76% of DOX and 80% of CP) by cleavage of chemical bonding and disruption of the MOFs structure under acidic condition (at pH 5.6). Moreover, DOX@ZIF-8/GO-FA/CP has synergistic cytotoxic effects as compared to the combination of both the drugs without ZIF-8/GO-FA when treating MCF-7 and MDA-MB-231 breast cancer cell lines (with a combination index of 0.29 and 0.75 for MCF-7 and MDA-MB-231 cell-lines, respectively). Hence this system can be applied as an effective platform for smart dual drug delivery in breast cancer treatment through its remarkable manageable multidrug release.

Hierarchical Core-Shell Fe₃O₄@mSiO₂@Chitosan Nanoparticles for pH-Responsive Drug Delivery

Hierarchical nanoparticles are of great interest because they possess unique physicochemical properties and multiple functionalities, providing a wealth of possibilities for various applications. In this work, we have developed a well-designed method to prepare hierarchical magnetic nanoparticles Fe₃O₄@mSiO₂@CS by integrating a solvothermal method for synthesizing the Fe₃O₄ core, a dualtemplating micelle system for preparing a layer of mesoporous silica (mSiO₂) shell, and a silane coupling method via γ-glycidoxypropyltrimethoxysilane for binding a chitosan (CS) layer on the silica surface. The porous hierarchical nanoparticles were characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), dynamic light scattering nanoparticle size analyzer, and specific surface area and pore size analyzer. The loading capacity and the release behavior of the as-prepared nanoparticles for doxorubicin hydrochloride were studied, and it was found that the drug release rate was faster at pH 6.0 than at pH 7.4, revealing the pH-responsive property of the nanoparticles.

Development of L-carnosine functionalized iron oxide nanoparticles loaded with dexamethasone for simultaneous therapeutic potential of blood brain barrier crossing and ischemic stroke treatment

The development of suitable drug delivery carriers is significant in biomedical applications to improve the therapeutic efficiency. Recent progress in nanotechnological fields, paved the way for the formulation of variety of drug carriers. The brain disorders such as ischemic stroke, brain cancer, and CNS disorders were poorly treated due to the presence of blood brain barrier that hinders the passage of drugs to the brain. Hence, the formulated drugs should have the ability to cross the blood-brain barrier (BBB) for ischemic stroke treatment. In the present work, we have synthesized PLGA functionalized magnetic Fe₃O₄ nanoparticle (MNP) with L-carnosine peptide (LMNP) composite loaded with dexamethasone (dm@LMNP) and demonstrated as efficient drug delivery platform for simultaneous BBB crossing and treatment of ischemic stroke. The surface morphology, particles size and zeta potential of the prepared material was studied from SEM, PSD, PDI and TEM analyses. The drug loading of dexamethasone in LMNP (dm@LMNP) vesicles was found to be 95.6 ± 0.2%. The in vitro drug release kinetics displayed that prepared composited LMNP material provides controlled and sustainable releasing efficiency at pH 7.4 and 5.8 when compared to the PLGA NPs and free dexamethasone drug molecules. The cytotoxicity and the biocompatibility test results were found to be satisfactory. The L-carnosine loaded nano-formulation has been greatly leads to effective BBB crossing to access the brain tissues. These results showed that the Fe₃O₄ nanoparticles/PLGA polymer can be used as an effective drug carrier for the treatment of stroke and simultaneous blood brain barrier crossing.

Applications of surface functionalized Fe3O4 NPs-based detection methods in food safety

Food safety has always been an issue of great concern to people. The development of rapid, sensitive and specific detection technology of food pollutants is one of the hot issues in food science field. The rapid development of functionalized Fe₃O₄ nanoparticles (NPs) provides unprecedented opportunities and technical support for the innovation of food safety detection. The surface functionalized Fe₃O₄ NPs, which combine superparamagnetic with nanoscale feature, have become an excellent tool for food quality and safety detection. This review highlights the mechanism, principles, and applications of surface functionalized Fe₃O₄ NPs-based detection technique in the agrifood industry. Then the relevant characteristics, functional roles and general mechanisms of nanomaterial-based detection of various endogenous components and exogenous pollutants in foods are discussed in detail. Ultimately, this review is expected to promote the optimization of functionalized Fe₃O₄ NPs and provide direction for the diversity of signal recognition and the sustainability of detection methods.

Lanthanide-Doped SPIONs Bioconjugation with Trastuzumab for Potential Multimodal Anticancer Activity and Magnetic Hyperthermia

Iron oxide-based nanoparticles have been modified in their core with holmium(III) in an amount affecting only slightly their magnetic properties. Nanoparticles were conjugated covalently with biomolecule of trastuzumab (Herceptin®), the monoclonal antibody that recognizes cancer cells overexpressing HER2 receptors targeting such nanoparticles to the specified tumor tissues. Systematic studies of Ho3+-doped bioconjugates were carried out as a preliminary step for future replacement of 'cold' Ho with 166Ho radionuclide, emitting 'soft' beta(-) radiation for possible targeted radionuclide therapy. Physicochemical properties of the obtained bioconjugates were subsequently tested for use in magnetic hyperthermia, considered as an effective, low-invasiveness anticancer therapy. With such a system we expect to achieve both: active targeting and multimodal action by simultaneous internal and localized irradiation and magnetic hyperthermia of specific cancers.

A reversible, switchable pH-driven quaternary ammonium pillar[5]arene nanogate for mesoporous silica nanoparticles

Here we describe the assembly and pH-driven operation of two nanocarriers based on non-functionalized (MCM-41) and carboxylate-functionalized (MCM-41-COOH) containers loaded with the anticancer drug doxorubicin (DOX) and capped by quaternary ammonium pillar[5]arene (P[5]A) nanogates. MCM-41 and MCM-41-COOH containers were synthesized and transmission and scanning electron microscopies showed nanoparticles with spherical morphology and dimensions of 85 ± 13 nm. The nanochannels of MCM-41 loaded with DOX were gated through the electrostatic interactions between P[5]A and the silanolate groups formed at the silica-water interface, yielding the MCM-41-DOX-P[5]A nanocarrier. The second nanocarrier was gated through the electrostatic interactions between the carboxylate groups mounted on the surface of MCM-41 and P[5]A, resulting in the MCM-41-COO-DOX-P[5]A nanocarrier. The DOX release profiles from both nanocarriers were investigated by UV-vis spectroscopy at different pH values (2.0, 5.5 and 7.4) and also in the presence of ions, such as citrate^3- (19 mmol L^-1) and Zn²⁺ (1.2 and 50 mmol L^-1) at 37 °C. MCM-41-COO-DOX-P[5]A can be turned on and off eight times through the formation and breaking of electrostatic interactions. In vitro studies show that MCM-41-COO-DOX-P[5]A can penetrate and release DOX in the nucleus of human breast adenocarcinoma MCF-7 cancer cells leading to a pronounced cytotoxic effect. Therefore, the fabricated nanocarrier based on a water-soluble cationic pillar[5]arene nanogate, which is reversibly opened and closed by electrostatic interactions, can be considered as a promising drug transport and delivery technique for future cancer therapy.

Utilization of green formulation technique and efficacy estimation on cell line studies for dual anticancer drug therapy with niosomes

The aim of the present study was to prepare niosome formulations for the simultaneous encapsulation, dual drug therapy, of two anticancer drugs by the ecological probe sonication method. Poloxamer and sorbitan monostearate were used as surface active agents in niosomes, and the water soluble doxorubicin and poorly-water soluble paclitaxel were used as anticancer drugs. Thorough physicochemical analysis were performed for the niosomes, and their cytotoxicity and activity were evaluated on MCF-7 and PC3-MM2 cancer cell lines. Prepared niosomes were small in size with sizes ranging from 137 nm to 893 nm, and entrapment efficiencies were high, ranging from 91.24% to 99.99%. During the four weeks stability testing, the particle size remained stable. The niosomal formulations showed in vitro sustained drug release profiles for doxorubicin and clearly increased the dissolution rate of poorly water soluble paclitaxel. The incorporation of both the drugs into niosomes improved cell penetration and antiproliferative activity of the drugs PC3-MM2 cell lines. As a conclusion, doxorubicin and paclitaxel loaded niosome formulations resulted in relatively stable, small sized niosomes with improved drug release profiles, low toxicity, better cell penetration and antiproliferative activity. The niosomes showed synergistic effect due to the presence of both drugs, which can overcome multidrug resistance.

Synthesis of surface modified Fe3O4 super paramagnetic nanoparticles for ultra sound examination and magnetic resonance imaging for cancer treatment

In the present work, Fe₃O₄ nanoparticles with superparamagnetic properties were prepared and capped by using Chitosan. The synthesized NPs were studied by using transmission electron microscopy (TEM) and Fourier transform infrared (FTIR) spectroscopy. Average particle size and surface charge of the synthesized NPs were characterized by using Malvern Zetasizer instrument. TEM images showed the morphology and size distribution of uncoated Fe₃O₄ NPs, exhibiting the uniform sized NPS with an average particle size of about 10 nm. Vibrating Scanning Magnetometry (VSM) experiments, showed the superparamagnetic nature of the prepared nanoparticles. Fe₃O₄ NPs showed ferromagnetic magnetization which is very sensitive towards the sample's nanostructure. The results of paramagnetic studies exhibited the substantial reduction in paramagnetic behavior after Chitosan coating but sufficient for responding in magnetic field. Further, the in-vitro ability of the Chitosan coated Fe₃O₄ NPs as contrast agents in efficient Ultra sound/Magnetic resonance (US/MR) imaging was investigated. These findings demonstrated that the Chitosan coated super para magnetic iron oxide nanoparticles (SPION) have reported significant contrast-enhanced imaging potential for dual-mode US/MR imaging. Hence, the prepared Chitosan coated SPION composites administration serve as potential guide in the diagnosis and treatment of cancers.

Rapid Polymerization of Aromatic Vinyl Monomers to Porous Organic Polymers via Acid Catalysis at Mild Condition

Porous organic polymers (POPs) have enormous applications in various fields and thus have received a lot of research attention in recent decades. Numerous synthetic methods have been developed, but mild synthesis conditions and fast polymerization rate are highly desired. Herein, high porous POPs with high surface areas from aromatic vinyl monomers by using acid catalysis method is reported. The polymerization is ultrafast and could be accomplished even in 5 min at room temperature. Furthermore, the surface area can be tuned by using various acid catalysts and controlling the reaction time. Due to the high surface area, these POPs show promising adsorption of carbon dioxide and hydrogen, respectively. Furthermore, the large π-system of the building block and high surface area of the POPs also make them show potential applications in photocatalytic hydrogen evolution as well as promising catalyst support for metal nanoparticles.

Fe3O4 Nanoparticles Functionalized with Polymer Ligand for T1-Weighted MRI In Vitro and In Vivo

Magnetic resonance imaging (MRI) has gained wide interest in early accurate diagnoses due to the high resolution and low toxicity of magnetic nanoparticles. In order to develop potential alternatives of toxic Gd- or Mn-based chelating agents, we report the synthesis of water soluble ultra-small Fe3O4 nanoparticles by a modified co-precipitation method as T1-weighted positive contrast agents. The magnetic iron oxide nanoparticles (MIONs) were functionalized by polymer ligand dodecanthiol-polymethacrylic acid (DDT-PMAA) to enhance their colloidal stability. These MIONs have high longitudinal relaxivity (r1 = 8.18 mM-1·S-1) and exhibited good results in the in vitro and in vivo MR imaging. No toxicity was observed in cytotoxicity assay and histology toxicity analysis. The MIONs@DDT-PMAA(magnetic iron oxide nanoparticles @ dodecanthiol-polymethacrylic acid) present great potential as positive contrast agents for tumor diagnosis.

Structural characterization of polysaccharide-coated iron oxide nanoparticles produced by Staphylococcus warneri, isolated from a thermal spring

The biocompatible-coated iron oxide nanoparticles (IONs) have attracted a great interest because of their various applications in biological science and medicine. In most cases, the toxic effect of naked iron oxide nanoparticles is completely cleared by adding a biocompatible coating, such as polysaccharides, polyethylene glycol (PEG), or biosynthesis of biocompatible-coated IONs using microorganisms such as bacteria. In the present study, polysaccharide-coated iron oxide nanoparticles were produced by a strain of Staphylococcus warneri isolated from a thermal spring. For identification of the isolated bacterium, 16S rRNA gene sequencing was done. Characterization of the nanoparticles was performed for the first time, using transmission electron microscopy (TEM), dynamic light scattering (DLS), thermogravimetric analysis (TGA), X-ray crystallography (XRD), Fourier-transform infrared (FTIR) spectroscopy, vibrating sample magnetometer (VSM), and 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay. Results indicated that the spherical iron oxide nanoparticles were coated by a polysaccharide (13.6%), which provided a large negative charge of -91 mV and very low saturation magnetization of around 0.28 emu/g. The result of MTT assay on MOLT-4 cell lines showed that the percentage of viability was between 95.6% and 68.9% in the 10-100 µM of nanoparticle concentrations with a high IC ₅₀ value, which makes it appropriate for biomedical applications such as cancer therapy.

Fabrication, optimization, and characterization of ultra-small superparamagnetic Fe3O4 and biocompatible Fe3O4@ZnS core/shell magnetic nanoparticles: Ready for biomedicine applications

Magnetic nanoparticles that preferred for biomedical applications are required to be biocompatible, nanosized and superparamagnetic. In this research, ultra-small superparamagnetic Fe₃O₄ nanoparticles and novel superparamagnetic Fe₃O₄@ZnS core/shell nanocomposites were fabricated using biocompatible ethylenediaminetetraacetic acid (EDTA) as a capping agent by a facile refluxing assisted co-precipitation method at optimum condition. The Fe₃O₄ and Fe₃O₄@ZnS nanoparticles were investigated using X-ray diffraction (XRD), scanning and transmission electron microscopy (SEM and TEM), UV-Vis spectroscopy, vibrating sample magnetometer (VSM) and Dynamic Light Scattering (DLS). The VSM results indicated that all of the samples have superparamagnetic behavior. The particle size of the Fe₃O₄ and Fe₃O₄@ZnS nanoparticles were obtained at about 10 and 22 nm, respectively.

Bifunctional magnetopolymersomes of iron oxide nanoparticles and carboxymethylcellulose conjugated with doxorubicin for hyperthermo-chemotherapy of brain cancer cells

Magnetopolymersomes for potential multimodal brain cancer therapy – “nanoheaters meet drug nanocarriers”.

Sub-nanometer scale size-control of iron oxide nanoparticles with drying time of iron oleate

The drying time of iron oleate as a single and reliable control parameter for the fine size control (with a sub-nanometer scale step) of monodisperse IONPs in the large-scale thermal decomposition method.

Biofunctionalized MnFe2O4@Au core-shell nanoparticles for pH-responsive drug delivery and hyperthermal agent for cancer therapy

Novel materials are explored very often by material scientists to design an efficient drug delivery system to target carcinoma cells. Among various nanosystem, functionalized Iron oxide Nanoparticles (IoNP) were definitely studied especially to target, endocyte and release drug moieties inside the cells. This IoNP platform is usually composed of an inorganic core and a highly biocompatible shell layer in order to perform numerous tasks at the same time, such as drug delivery, multimodal imaging, and instantaneous monitoring, along with collective therapeutic approaches. Hence, in this work, MnFe₂O₄@Au nanoparticles (Mf@A) are used as a structure for docking anti-cancer drug using a coupling molecule for the precise targeting. The formation of the core-shell structure was corroborated by high-angle annular dark-field scanning transmission electron microscopy and line mapping techniques. Superconducting quantum interference device confirms the fabricated nanostructure is favorably superparamagnetic. The stability of nanoparticles was examined by measuring the zeta-potential measurements. The binding efficiency of the drug onto the Mf@A was found to be >90%. Drug-release was carried out at different pH and found that the release is maximum at lower pH. Finally, at 2.45 GHz we employed as a magneto-hyperthermal agent which produced heat to kill the cancerous cell.

Influence of medium viscosity and intracellular environment on the magnetization of superparamagnetic nanoparticles in silk fibroin solutions and 3T3 mouse fibroblast cell cultures

Biomedical applications based on the magnetic properties of superparamagnetic iron oxide nanoparticles (SPIONs) may be altered by the mechanical attachment or cellular uptake of these nanoparticles. When nanoparticles interact with living cells, they are captured and internalized into intracellular compartments. Consequently, the magnetic behavior of the nanoparticles is modified. In this paper, we investigated the change in the magnetic response of 14 nm magnetic nanoparticles (Fe₃O₄) in different solutions, both as a stable liquid suspension (one of them mimicking the cellular cytoplasm) and when associated with cells. The field-dependent magnetization curves from inert fluids and cell cultures were determined by using an alternating gradient magnetometer, MicroMagTM 2900. The equipment was adapted to measure liquid samples because it was originally designed only for solids. In order to achieve this goal, custom sample holders were manufactured. Likewise, the nuclear magnetic relaxation dispersion profiles for the inert fluid were also measured by fast field cycling nuclear magnetic relaxation relaxometry. The results show that SPION magnetization in inert fluids was affected by the carrier liquid viscosity and the concentration. In cell cultures, the mechanical attachment or confinement of the SPIONs inside the cells accounted for the change in the dynamic magnetic behavior of the nanoparticles. Nevertheless, the magnetization value in the cell cultures was slightly lower than that of the fluid simulating the viscosity of cytoplasm, suggesting that magnetization loss was not only due to medium viscosity but also to a reduction in the mechanical degrees of freedom of SPIONs rotation and translation inside cells. The findings presented here provide information on the loss of magnetic properties when nanoparticles are suspended in viscous fluids or internalized in cells. This information could be exploited to improve biomedical applications based on magnetic properties such as magnetic hyperthermia, contrast agents and drug delivery.

Surface Functionalization of Iron Oxide Nanoparticles with Gallic Acid as Potential Antioxidant and Antimicrobial Agents

In this research, we report the size-controlled synthesis and surface-functionalization of magnetite with the natural antioxidant gallic acid (GA) as a ligand, using in situ and post-synthesis methods. GA functionalization provided narrow size distribution, with an average particle size of 5 and 8 nm for in situ synthesis of gallic acid functionalized magnetite IONP@GA1 and IONP@GA2, respectively, which are ultra-small particles as compared to unfunctionalized magnetite (IONP) and post functionalized magnetite IONP@GA3 with average size of 10 and 11 nm respectively. All the IONPs@GA samples were found hydrophilic with stable aggregation state. Prior to commencement of experimental lab work, PASS software was used to predict the biological activities of GA and it is found that experimental antioxidant activity using 2,2-diphenyl-1-picrylhydrazyl (DPPH) assay and antimicrobial studies using well diffusion method are in good agreement with the simulated results. Furthermore, the half maximal inhibitory concentration (IC50) values of DPPH antioxidant assay revealed a 2-4 fold decrease as compared to unfunctionalized IONP. In addition to antioxidant activity, all the three IONP@GA proved outstanding antimicrobial activity while testing on different bacterial and fungal strains. The results collectively indicate the successful fabrication of novel antioxidant, antimicrobial IONP@GA composite, which are magnetically separable, efficient, and low cost, with potential applications in polymers, cosmetics, and biomedical and food industries.

Designed Synthesis of Nanostructured Magnetic Hydroxyapatite Based Drug Nanocarrier for Anti-Cancer Drug Delivery toward the Treatment of Human Epidermoid Carcinoma

Superparamagnetic Fe₃O₄ nanoparticles on hydroxyapatite nanorod based nanostructures (Fe₃O₄/HAp) were synthesized using hydrothermal techniques at 180 °C for 12 h and were used as drug delivery nanocarriers for cancer cell therapeutic applications. The synthesized Fe₃O₄/HAp nanocomposites were characterized by X-ray diffraction analysis (XRD), Field emission scanning electron microscopy (FESEM), Fourier transform infrared spectroscopy (FTIR), Brunauer-Emmett-Teller (BET)-analysis, and vibrating sample magnetometry (VSM). The morphologies of the Fe₃O₄/HAp nanocomposites show 15 nm Fe₃O₄ nanoparticles dispersed in the form of rods. The BET result shows that the synthesized samples have a high specific surface area of 80 m² g-1 with mesoporous structures. Magnetic measurements revealed that the sample has high saturation magnetization of 18 emu/g with low coercivity. The Fe₃O₄/HAp nanocomposites had a large specific surface area (SSA), high mesoporous volume, and good magnetic property, which made it a suitable nanocarrier for targeted drug delivery systems. The chemotherapeutic agent, andrographolide, was used to investigate the drug delivery behavior of the Fe₃O₄/HAp nanocomposites. The human epidermoid skin cancer cells (A431) were used as the model targeting cell lines by treating with andrographolide loaded Fe₃O₄/HAp nanosystems and were further evaluated for their antiproliferative activities and the induction of apoptosis. Also, the present nanocomposite shows better biocompatibility, therefore it can be used as suitable drug vehicle for cancer therapy applications.

Metal-Organic Framework/Graphene Quantum Dot Nanoparticles Used for Synergistic Chemo- and Photothermal Therapy

In this study, a simple one-pot method was used to prepare a multifunctional platform for synergistic chemo- and photothermal therapy,, which is composed of zeolitic imidazolate framework-8 (ZIF-8) as drug nanocarriers and the embedded graphene quantum dots (GQDs) as local photothermal seeds. The structure, drug release behavior, photothermal effect, and synergistic therapeutic efficiency of the ZIF-8/GQD nanoparticles were systematically investigated. Using doxorubicin (DOX) as a model anticancer drug, the results showed that monodisperse ZIF-8/GQD nanoparticles with a particle size of 50-100 nm could encapsulate DOX during the synthesis procedure and trigger DOX release under acidic conditions. The DOX-loaded ZIF-8/GQD nanoparticles could efficiently convert near-infrared (NIR) irradiation into heat and thereby increase the temperature. More importantly, with breast cancer 4T1 cells as a model cellular system, the results indicated that the combined chemo- and photothermal therapy with DOX-ZIF-8/GQD nanoparticles exhibited a significant synergistic effect, resulting in a higher efficacy to kill cancer cells compared with chemotherapy and photothermal therapy alone. Hence, ZIF-8/GQD nanoparticles would be promising as versatile nanocarriers for synergistic cancer therapy.

Investigation on a smart nanocarrier with a mesoporous magnetic core and thermo-responsive shell for co-delivery of doxorubicin and curcumin: a new approach towards combination therapy of cancer

A novel and smart MIO-P(NIPAM-MAm) nanocomposite has been prepared for combinational delivery of Dox and Cur for cancer treatment.

Preparation of Magnetic Iron Oxide Nanoparticles (MIONs) with Improved Saturation Magnetization Using Multifunctional Polymer Ligand

This paper describes the preparation of ultra-small magnetic iron oxide (Fe₃O₄) nanoparticles (MIONs) coated with water-soluble thioether end-functionalized polymer ligand pentaerythritol tetrakis 3-mercaptopropionate-polymethacrylic acid (PTMP-PMAA). The MIONs were prepared by co-precipitation of aqueous iron precursor solution at a high temperature. The polymer modified MIONs were characterized by dynamic light scattering (DLS), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), X-ray powder diffraction (XRD), thermogravimetric analysis (TGA), and vibrating sample magnetometery (VSM). It was found that these MIONs were successfully modified by this water-soluble polymer ligand with a fairly uniform size and narrow size distribution. The dried powder of MIONs could be stored for a long time and re-dispersed well in water without any significant change. Additionally, the polymer concentration showed a significant effect on size and magnetic properties of the MIONs. The saturation magnetization was increased by optimizing the polymer concentration. Furthermore, the 3-(4,5-dimethylthiazol-2-yl)-2-5-diphenyltetrazolium bromide (MTT)-assay demonstrated that these MIONs were highly biocompatible and they could be successfully coupled with fluorescent dye Rhodamine due to the formation of amide bond between carboxylic acid groups of MIONs and amine groups of dye. The obtained results indicated that these multifunctional MIONs with rich surface chemistry exhibit admirable potential in biomedical applications.

Design and Utility of Metal/Metal Oxide Nanoparticles Mediated by Thioether End-Functionalized Polymeric Ligands

The past few decades have witnessed significant advances in the development of functionalized metal/metal oxide nanoparticles including those of inorganic noble metals and magnetic materials stabilized by various polymeric ligands. Recent applications of such functionalized nanoparticles, including those in bio-imaging, sensing, catalysis, drug delivery, and other biomedical applications have triggered the need for their facile and reproducible preparation with a better control over their size, shape, and surface chemistry. In this perspective, the multidentate polymer ligands containing functional groups like thiol, thioether, and ester are important surface ligands for designing and synthesizing stable nanoparticles (NPs) of metals or their oxides with reproducibility and high yield. These ligands have offered an unprecedented control over the particle size of both nanoparticles and nanoclusters with enhanced colloidal stability, having tunable solubility in aqueous and organic media, and tunable optical, magnetic, and fluorescent properties. This review summarizes the synthetic methodologies and stability of nanoparticles and fluorescent nanoclusters of metals (Au, Ag, Cu, Pt, and other transition metal oxides) prepared by using thioether based ligands and highlights their applications in bio-imaging, sensing, drug delivery, magnetic resonance imaging (MRI), and catalysis. The future applications of fluorescent metal NPs like thermal gradient optical imaging, single molecule optoelectronics, sensors, and optical components of the detector are also envisaged.

In vitro study on apoptotic cell death by effective magnetic hyperthermia with chitosan-coated MnFe₂O₄

Magnetic nanoparticles (MNPs) have been widely investigated as a hyperthermic agent for cancer treatment. In this study, thermally responsive Chitosan-coated MnFe2O4 (Chitosan-MnFe2O4) nanoparticles were developed to conduct localized magnetic hyperthermia for cancer treatment. Hydrophobic MnFe2O4 nanoparticles were synthesized via thermal decomposition and modified with 2,3-dimercaptosuccinic acid (DMSA) for further conjugation of chitosan. Chitosan-MnFe2O4 nanoparticles exhibited high magnetization and excellent biocompatibility along with low cell cytotoxicity. During magnetic hyperthermia treatment (MHT) with Chitosan-MnFe2O4 on MDA-MB 231 cancer cells, the targeted therapeutic temperature was achieved by directly controlling the strength of the external AC magnetic fields. In vitro Chitosan-MnFe2O4-assisted MHT at 42 °C led to drastic and irreversible changes in cell morphology and eventual cellular death in association with the induction of apoptosis through heat dissipation from the excited magnetic nanoparticles. Therefore, the Chitosan-MnFe2O4 nanoparticles with high biocompatibility and thermal capability can be an effective nano-mediated agent for MHT on cancer.

Superparamagnetic iron-doped nanocrystalline apatite as a delivery system for doxorubicin

Iron-doped superparamagnetic apatite nanoparticles are promising materials for magnetic drug delivery systems due to their ability to strongly bind the anticancer doxorubicin and provide an active control over the drug release by using a low-frequency pulsed electromagnetic field.

Recent progress on magnetic iron oxide nanoparticles: synthesis, surface functional strategies and biomedical applications

This review focuses on the recent development and various strategies in the preparation, microstructure, and magnetic properties of bare and surface functionalized iron oxide nanoparticles (IONPs); their corresponding biological application was also discussed. In order to implement the practical in vivo or in vitro applications, the IONPs must have combined properties of high magnetic saturation, stability, biocompatibility, and interactive functions at the surface. Moreover, the surface of IONPs could be modified by organic materials or inorganic materials, such as polymers, biomolecules, silica, metals, etc. The new functionalized strategies, problems and major challenges, along with the current directions for the synthesis, surface functionalization and bioapplication of IONPs, are considered. Finally, some future trends and the prospects in these research areas are also discussed.

One-pot green synthesis of reduced graphene oxide (RGO)/Fe3O4 nanocomposites and its catalytic activity toward methylene blue dye degradation

The reduced graphene oxide (RGO)/Fe3O4 nanocomposites were synthesized through a facile one-pot green synthesis by using solanum trilobatum extract as a reducing agent. Spherical shaped Fe3O4 nanoparticles with the diameter of 18 nm were uniformly anchored over the RGO matrix and the existence of fcc structured Fe3O4 nanoparticles over the RGO matrix was ensured from X-ray diffraction patterns. The amide functional groups exist in the solanum trilobatum extract is directly responsible for the reduction of Fe(3+) ions and GO. The thermal stability of GO was increased by the removal of hydrophilic functional groups via solanum trilobatum extract and was further promoted by the ceramic Fe3O4 nanoparticles. The ID/IG ratio of RGO/Fe3O4 was increased over GO, indicating the extended number of structural defects and disorders in the RGO/Fe3O4 composite. The catalytic efficiency of prepared nanostructures toward methylene blue (MB) dye degradation mediated through the electron transfer process of BH4(-) ions was studied in detail. The π-π stacking, hydrogen bonding and electrostatic interaction exerted between the RGO/Fe3O4 composite and methylene blue, increased the adsorption efficiency of dye molecules and the large surface area and extended number of active sites completely degraded the MB dye within 12 min.

Magnetic Properties and AC Losses in AFe2O4(A = Mn, Co, Ni, Zn) Nanoparticles Synthesized from Nonaqueous Solution

Nanosized particles of AFe2O4(A = Mn, Co, Ni, or Zn) spinel ferrites were synthesized by coprecipitation from nonaqueous solutions using nitrate salts as starting reagents. The particles were characterized by X-ray diffraction, transmission electron microscopy, and magnetic measurements. Quasistatic magnetic measurements show superparamagnetic behavior with blocking temperature below room temperature for cobalt, nickel, and zinc spinel ferrite nanoparticles. Characteristic magnetic parameters of the particles including average magnetic moment of an individual nanoparticle and blocking temperature have been determined. The specific loss power which is released on the exposure of an ensemble of synthesized particles to a magnetic field is calculated and measured experimentally. It is shown that among all nanoferrites under study, the ZnFe2O4nanoparticles demonstrate the highest heating efficiency in AC magnetic fields. The key parameters responsible for the heating efficiency in AC magnetic field have been determined. The directions to enhance the SLP value have been outlined.

Magnetic colloidal superparticles of Co, Mn and Ni ferrite featured with comb-type and/or linear amphiphilic polyelectrolytes; NMR and MRI relaxometry

Hydrophobically-modified magnetic superparticles (MSPs) of MFe₂O₄ NPs were synthesized in the presence of amphiphilic polymers with different architectures and evaluated through NMR and MRI relaxivity measurements.

Magnetic nanoparticle-based therapeutic agents for thermo-chemotherapy treatment of cancer

Magnetic nanoparticles have been widely investigated for their great potential as mediators of heat for localised hyperthermia therapy. Nanocarriers have also attracted increasing attention due to the possibility of delivering drugs at specific locations, therefore limiting systematic effects. The enhancement of the anti-cancer effect of chemotherapy with application of concurrent hyperthermia was noticed more than thirty years ago. However, combining magnetic nanoparticles with molecules of drugs in the same nanoformulation has only recently emerged as a promising tool for the application of hyperthermia with combined chemotherapy in the treatment of cancer. The main feature of this review is to present the recent advances in the development of multifunctional therapeutic nanosystems incorporating both magnetic nanoparticles and drugs, and their superior efficacy in treating cancer compared to either hyperthermia or chemotherapy as standalone therapies. The principle of magnetic fluid hyperthermia is also presented.

One-step synthesis of biocompatible magnetite/silk fibroin core-shell nanoparticles

A one-step hydrothermal process with silk fibroin (SF) nanofibers as the template and coating was developed to synthesize core-shell magnetite/SF nanoparticles with limited controllable sizes. The Fe₃O₄ nanoparticles gradually aggregated into nanospheres with sizes increased from 120 to 500 nm by increasing the SF content in the reaction system. The magnetic properties and biocompatibility of Fe₃O₄/SF nanoparticles, as well as their functional ability with antibodies are also discussed to assess their possible applications in MRI and bio-separation. Compared to previous two-step processes, our one-step method provides a simpler and more cost-effective approach to prepare biocompatible core-shell magnetite nanoparticles.

Synthesis and characterization of surface-modified Fe3O4 super-paramagnetic nanoparticles

Aqueous dispersion and stability of Fe3O4 nanoparticles remain an issue unresolved since aggregation of naked iron nanoparticles in water. In this study, we successfully synthesized different Fe3O4 super-paramagnetic nanoparticles which were modified by three kinds of materials [DSPE-MPEG2000, TiO2 and poly acrylic acid (PAA)] and further detected their characteristics. Transmission electron microscopy (TEM) clearly showed sizes and morphology of the four kinds of nanoparticles. X-ray diffraction (XRD) proved successfully coating of the three kinds of nanoparticles and their structures were maintained. Vibrating sample magnetometer (VSM) verified that their magnetic properties fitted for the super-paramagnetic function. More importantly, the particle size analysis indicated that Fe3O4@PAA had a better size distribution, biocompatibility, stability and dispersion than the other two kinds of nanoparticles. In addition, using CNE2 cells as a model, we found that all nanoparticles were nontoxic. Taken together, our data suggest that Fe3O4@PAA nanoaparticles are superior in the application of biomedical field among the four kinds of Fe3O4 nanoparticles in the future.

Ethylenediaminetetraacetic acid as capping ligands for highly water-dispersible iron oxide particles

Monodispersed magnetite (Fe3O4) particles were synthesized using a high-temperature hydrolysis reaction with the assistance of ethylenediaminetetraacetic acid (EDTA) as capping ligands. These particles were composed of small primary nanocrystals and their sizes could be tuned from about 400 to about 800 nm by simply changing the EDTA or precursor concentration. Surface-tethered EDTA made the particles highly water-dispersible. The as-prepared magnetite particles also showed superparamagnetic behavior at room temperature, and their magnetic properties were size dependent. In addition, the particles had a strong response to external magnetic field due to their high magnetization saturation values. These properties were very important for some potential biomedical applications, such as magnetic separation and magnetic-targeted substrate delivery.

Ultra-small fluorescent inorganic nanoparticles for bioimaging

The recent advances of ultra-small fluorescence inorganic nanoparticles including quantum dots, metal nanoclusters, carbon and graphene dots, up-conversion nanocrystals, and silicon nanoparticles have been comprehensively reviewed.