Structurally decoupled hyaluronic acid hydrogels for studying matrix metalloproteinase-mediated invasion of metastatic breast cancer cells

In recent years, polymeric hydrogels have been employed to investigate cancer cell-extracellular matrix (ECM) interactions in vitro. In the context of breast cancer, cancer cells are known to degrade the ECM using matrix-metalloproteinases (MMPs) to support invasion resulting in disease progression. Polymeric hydrogels incorporating MMP-cleavable peptides have been employed to study cancer cell invasion, however, the approaches employed to incorporate these peptides often change other hydrogel properties. This underscores the need for decoupling hydrogel properties while incorporating MMP-cleavable peptides. Herein, we report structurally decoupled hyaluronic acid (HA) hydrogels formulated using varying ratios of a biologically sensitive MMP-cleavable peptide and an insensitive counterpart (Dithiothreitol (DTT) or polyethylene glycol dithiol (PEGDT)) to study MMP-mediated metastatic breast cancer cell invasion. Rheological, swelling ratio, estimated mesh size, and permeability measurements showed similar mechanical and physical properties for hydrogels crosslinked with different DTT (or PEGDT)/MMP ratios. However, their degradation rate in the presence of collagenase correlated with the ratio of MMP-cleavable peptide. Encapsulated metastatic breast cancer spheroids in HA hydrogels with MMP sensitivity exhibited increased invasiveness compared to those without MMP sensitivity after 14 days of culture. Overall, such structurally decoupled HA hydrogels provide a platform to study MMP-mediated breast cancer cell invasion in vitro.

Hemoadhican-Based Bioabsorbable Hydrogel for Preventing Postoperative Adhesions

Postoperative peritoneal adhesions are a prevalent clinical issue following abdominal and pelvic surgery, frequently resulting in heightened personal and societal health burdens. Traditional biomedical barriers offer limited benefits because of practical challenges for doctors and their incompatibility with laparoscopic surgery. Hydrogel materials, represented by hyaluronic acid gels, are receiving increasing attention. However, existing antiadhesive gels still have limited effectiveness or carry the risk of complications in clinical applications. Herein, we developed a novel hydrogel using polysaccharide hemoadhican (HD) as the base material and polyethylene glycol diglycidyl ether (PEGDE) as the cross-linking agent. The HD hydrogels exhibit appropriate mechanical properties, injectability, and excellent cytocompatibility. We demonstrate resistance to protein adsorption and L929 fibroblast cell adhesion to the HD hydrogel. The biodegradability and efficacy against peritoneal adhesion are further evaluated in C57BL/6 mice. Our results suggest a potential strategy for anti-postoperative tissue adhesion barrier biomaterials.

Hydrogel Based on Riclin Cross-Linked with Polyethylene Glycol Diglycidyl Ether as a Soft Filler for Tissue Engineering

Hydrogels composed of natural polysaccharides have been widely used as filling materials, with a growing interest in medical cosmetology and skin care. However, conventional commercial dermal fillers still have limitations, particularly in terms of mechanical performance and durability in vivo. In this study, a novel injectable and implantable hydrogel with adjustable characteristics was prepared from succinoglycan riclin by introducing PEG diglycidyl ether as a cross-linker. FTIR spectra confirmed the cross-linking reaction. The riclin hydrogels exhibited shear-thinning behavior, excellent mechanical properties, and cytocompatibility through in vitro experiments. Furthermore, when compared with subcutaneous injection of a commercial hyaluronic acid hydrogel, the riclin hydrogels showed enhanced persistence and biocompatibility in Balb/c mice after 16 weeks. These results demonstrate the great potential of the riclin-based hydrogel as an alternative to conventional commercial soft tissue fillers.

Preparation and characterization of wound healing hydrogel based on fish skin collagen and chitosan cross-linked by dialdehyde starch

Hydrogels due to high water absorption capacity, flexibility, biodegradability properties and also the ability to provide a moist environment, same as native extracellular, are widely used for wound healing applications. Developing multifunctional hydrogels using biomaterial is an emerging approach in this area. Collagen and chitosan are known as excellent biomaterials due to their properties, functionality, and sustainable sources. They also have good biocompatibility and biodegradability, suitable for wound healing hydrogels. In this study, the physicochemical characterization, morphology, and biocompatibility of collagen/chitosan/ dialdehyde starch hydrogel (Col/Ch/DAS) were evaluated. Type I collagen was extracted from silver carp skin by-product. DAS was synthesized by a one-step method of acid hydrolysis and oxidation. Hydrogels were made from collagen (4 % w/v) and chitosan mix (2 % w/v) and added DAS (2 % w/v) (0.5, 1.0 and 1.5 ml) as a cross-linker to enhance the physicochemical behaviors of the hydrogels. Swelling ratio, biodegradation, water vapor transmission rate (WVTR), surface morphology and the interactions between functional groups of polymers used in the hydrogel were evaluated. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) test of extracted collagen indicated the presence of two different α-chains in collagen and confirmed type I collagen. The results showed that DAS content significantly affected the swelling ratio and biodegradability of hydrogels (P < 0.05). Col/Ch/Das0.5 hydrogel showed the highest swelling and biodegradability compared to other hydrogels (P < 0.05). Col/Cs/DAS hydrogels showed suitable water vapor transmission for wound dressing. The Fourier transform infrared spectroscopy (FTIR) results showed that covalent bonds formed via acetalization and Schiff base reaction. The results suggested that the prepared hydrogel from silver carp fish skin collagen has excellent potential as a new wound dressing for medical and biomedical applications such as wound healing.

Fabrication and performance evaluation of PLCL-hCOLIII small-diameter vascular grafts crosslinked with procyanidins

Cardiovascular disease has become one of the main causes of death. It is the common goal of researchers worldwide to develop small-diameter vascular grafts to meet clinical needs. Collagen is a valuable biomaterial that has been used in the preparation of vascular grafts and has shown good results. Recombinant humanized collagen (RHC) has the advantages of clear chemical structure, batch stability, no virus hazard and low immunogenicity compared with animal-derived collagen, which can be developed as vascular materials. In this study, Poly (l-lactide- ε-caprolactone) with l-lactide/ε-caprolactone (PLCL) and type III recombinant humanized collagen (hCOLIII) were selected as raw materials to prepare vascular grafts, which were prepared by the same-nozzle electrospinning apparatus. Meanwhile, procyanidin (PC), a plant polyphenol, was used to cross-link the vascular grafts. The physicochemical properties and biocompatibility of the fabricated vascular grafts were investigated by comparing with glutaraldehyde (GA) crosslinked vascular grafts and pure PLCL grafts. Finally, the performance of PC cross-linked PLCL-hCOLIII vascular grafts were evaluated by rabbit carotid artery transplantation model. The results indicate that the artificial vascular grafts have good cell compatibility, blood compatibility, and anti-calcification performance, and can remain unobstructed after 30 days carotid artery transplantation in rabbits. The grafts also showed inhibitory effects on the proliferation of SMCs and intimal hyperplasia, demonstrating its excellent performance as small diameter vascular grafts.

Injectable fillers: current status, physicochemical properties, function mechanism, and perspectives

With the increasing understanding of the aging process and growing desire for minimally invasive treatments, injectable fillers have great potential for correcting and rejuvenating facial wrinkles/folds and contouring the face. However, considering the increasing availability of multiple soft tissue fillers, it is important to understand their inherent biophysical features and specific mechanism. Thus, in this review, we aim to provide an update on the current injectable filler products and analyze and compare their critical physicochemical properties and function mechanisms for volume-filling. Additionally, future trends and development processes for injectable fillers are also proposed.

Synthesis, Characterization and Biological Properties of Type I Collagen-Chitosan Mixed Hydrogels: A Review

Type I collagen and chitosan are two of the main biological macromolecules used to design scaffolds for tissue engineering. The former has the benefits of being biocompatible and provides biochemical cues for cell adhesion, proliferation and differentiation. However, collagen hydrogels usually exhibit poor mechanical properties and are difficult to functionalize. Chitosan is also often biocompatible, but is much more versatile in terms of structure and chemistry. Although it does have important biological properties, it is not a good substrate for mammalian cells. Combining of these two biomacromolecules is therefore a strategy of choice for the preparation of interesting biomaterials. The aim of this review is to describe the different protocols available to prepare Type I collagen-chitosan hydrogels for the purpose of presenting their physical and chemical properties and highlighting the benefits of mixed hydrogels over single-macromolecule ones. A critical discussion of the literature is provided to point out the poor understanding of chitosan-type I collagen interactions, in particular due to the lack of systematic studies addressing the effect of chitosan characteristics.

Formulation development of collagen/chitosan-based porous scaffolds for skin wounds repair and regeneration

Herein we developed a hydrogel based porous cross-linked scaffold intended for the treatment of chronic skin ulcers. It is made of collagen, the most abundant protein of mammals ECM, and chitosan, a natural polysaccharide endowed with numerous positive cues for wound repair. Different cross-linking methods, namely UV irradiation with the addition of glucose, addition of tannic acid as cross-linking agent and ultrasonication, were employed to prepare a cross-linked hydrogel with a highly interconnected 3D internal structure. The variables considered critical to obtain a suitable system for the envisaged application are the composition of hydrogels, especially the concentration of chitosan, and the concentration ratio between chitosan and collagen. Stable systems, characterized by high porosity and stability, were obtained thanks to the use of freeze-drying process. To assess the influence of the above-mentioned variables on scaffold mechanical properties, a Design of Experiments (DoE) approach was exploited, which resulted in the identification of the best hydrogel composition. In vitro and in vivo assays on a fibroblast model cell line and on a murine model, respectively, demonstrated scaffold biocompatibility, biomimicry, and safety.

Photothermal Hydrogels for Promoting Infected Wound Healing

Photothermal therapies (PTT), with spatiotemporally controllable antibacterial capabilities without inducing resistance, have shown encouraging prospects in the field of infected wound treatments. As an important platform for PTT, photothermal hydrogels exhibit attractive advantages in the field of infected wound treatment due to their excellent biochemical properties and have been intensively explored in recent years. This review summarizes the progress of the photothermal hydrogels for promoting infected wound healing. Three major elements of photothermal hydrogels, i.e., photothermal materials, hydrogel matrix, and construction methods, are introduced. Furthermore, different strategies of photothermal hydrogels in the treatment of infected wounds are summarized. Finally, the challenges and prospects in the clinical treatment of photothermal hydrogels are discussed.

Integrity of the ECM Influences the Bone Regenerative Property of ECM/Dicalcium Phosphate Composite Scaffolds

Due to the limitation of clinical autologous bone supply and other issues, the development of bone regeneration materials is still a hot topic. Natural tissue-derived bone repair materials have good biocompatibility and degradability, but their structure and properties are likely to be adversely affected during terminal sterilization. In this study, a composite scaffold consisting of the acellular extracellular matrix and dicalcium phosphate (ECM/DCP) was fabricated and terminally sterilized by γ-ray irradiation. In addition, the ECM/DCP scaffold was saturated with water and was also sterilized by γ-ray irradiation (RX-ECM/DCP). Results showed that the triple helix structure of collagen was better maintained in RX-ECM/DCP than in ECM/DCP. The thermal stability of RX-DCP/ECM was much better than that of ECP/ECM. The in vitro and in vivo performances of both types of scaffolds were also evaluated. The RX-ECM/DCP scaffold exhibited better in vitro bioactivity than that of the ECM/DCP scaffold as evidenced by more mineral formation in the simulated body fluid. In addition, RX-ECM/DCP also induced more effective bone regeneration than the ECM/DCP scaffold did in a rat calvarial defect model. Results sufficiently demonstrated that the addition of water to the scaffold could protect the structure of the ECM/DCP scaffold from being damaged by γ-ray irradiation during the terminal sterilization process. In summary, this study demonstrated a means to protect the ECM structure, which in turn led to the improvement of bone regenerative properties of the materials during γ-ray irradiation of ECM-based bone repair materials.

Hydrogel Preparation Methods and Biomaterials for Wound Dressing

Wounds have become one of the causes of death worldwide. The metabolic disorder of the wound microenvironment can lead to a series of serious symptoms, especially chronic wounds that bring great pain to patients, and there is currently no effective and widely used wound dressing. Therefore, it is important to develop new multifunctional wound dressings. Hydrogel is an ideal dressing candidate because of its 3D structure, good permeability, excellent biocompatibility, and ability to provide a moist environment for wound repair, which overcomes the shortcomings of traditional dressings. This article first briefly introduces the skin wound healing process, then the preparation methods of hydrogel dressings and the characteristics of hydrogel wound dressings made of natural biomaterials and synthetic materials are introduced. Finally, the development prospects and challenges of hydrogel wound dressings are discussed.

Self-crosslinkable hyaluronate-based hydrogels as a soft tissue filler

With increasing interest in aging and skin care, the use of fillers to increase the volume of soft tissue volume is increasing globally. However, the side effects caused by the residual chemical crosslinking agents present in these fillers limit the effective application of commercialized filler products. Therefore, the development of a novel crosslinking system with a non-toxic chemical crosslinking agent is required to overcome the limitations of commercial hyaluronate (HA)-based fillers. In this paper, a new injectable hydrogel with enhanced mechanical properties, tissue adhesion, injectability, and biocompatibility is reported. The HA derivatives modified with catechol groups (HA-DA) were crosslinked by self-oxidation under in vivo physiological conditions (pH 7.4) without chemical crosslinkers to form hydrogels, which can be further accelerated by the dissolved oxygen in the body. The fabricated HA-DA filler showed excellent mechanical properties and could be easily injected with a low injection force. Further, the HA-DA filler stably attached to the injection site due to the tissue adhesion properties of the catechol groups, thus leading to an improved displacement stability. In addition, the HA-DA filler showed excellent cell viability, cell proliferation, and biocompatibility. Therefore, the HA-DA hydrogel is a novel soft tissue filler with great potential to overcome the limitations of commercial soft tissue fillers.

Gamma sterilization of collagen/hydroxyapatite composites: Validation and radiation effects

In this work, gamma sterilization was validated, and the impact of this sterilization process on collagen/hydroxyapatite (Col/HAp) composites was investigated. It has been already recognized that the improper sterilization of healthcare products may lead to infection and mortality/morbidity issues in patients. Gamma sterilization has emerged as a promising sterilization method because it shows advantages such as low cost, a small increase in temperature of irradiated materials, and no production of toxic residues. Moreover, gamma rays can reach the products even when contained in sealed packages. The dose of gamma radiation applied in this study ranged from 17.5 to 50 kGy. The studied samples were examined by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), thermogravimetry (TG), and differential scanning calorimetry (DSC). No apparent effect of gamma radiation on HAp was observed even when doses as high as 50 kGy were applied. On the other hand, Col was greatly affected by gamma radiation, displaying cross-linking and degradation after sterilization. These structural changes may alter Col's properties, which could, in turn, impact its medical use. As a consequence, it is strongly recommended that the irradiation dose used to sterilize the Col/HAp composites shall be kept as low as possible to mitigate the structural changes induced in Col. It was noticed that a radiation dose of 17.5 kGy was sufficient to sterilize the examined samples because a sterility assurance level (SAL) below 10^-6 was detected. Although dramatic structural changes were observed in Col when this dose was applied, the sterilized samples showed no toxicity to human mesenchymal stem cells. Based on these results, we established a VD_Max of 17.5 kGy for Col/HAp-based healthcare products.

Exploring the potential of the recombinant human collagens for biomedical and clinical applications: a short review

Natural animal collagen and its recombinant collagen are favourable replacements in human tissue engineering due to their remarkable biomedical property. However, this exploitation is largely restricted due to the potential of immunogenicity and virus contamination. Exploring new ways to produce human collagen is fundamental to its biomedical and clinical application. All human fibrillar collagen molecules have three polypeptide chains constructed from a repeating Gly-Xaa-Yaa triplet, where Xaa and Yaa represent one random amino acid. Using cDNA techniques to modify several repeat sequences of the cDNA fragment, a novel human collagen, named recombinant human-like collagen (rHLC), with low immunogenicity and little risk from hidden virus can be engineered and notably tailored to specific applications. Human-like collagen (HLC) was initially used as a coating to modify the tissue engineering scaffold, and then used as the scaffold after cross-link agents were added to increase its mechanical strength. Due to its good biocompatibility, low immunogenicity, stabilised property, and the ability of mass production, HLC has been widely used in skin injury treatments, vascular scaffolds engineering, cartilage, bone defect repair, skincare, haemostatic sponge, and drug delivery, including coating with medical nanoparticles. In this review, we symmetrically reviewed the development, recent advances in design and application of HLC, and other recombinant human collagen-based biomedicine potentials. At the end, future improvements are also discussed.

The application possibility of acellular dermal matrix decorated with nano-silver in the reconstruction of contaminated abdominal wall

Acellular dermal matrix (ADM) is a biomaterial, which commonly used for repair of tissue defects; however, infection is the main factor underlying the failure of treatments involving ADM. To enhance the anti-infection ability of ADM, we constructed a new form of ADM that was decorated with nano-silver ('NS-ADM'). The introduction of nano-silver did not destroy the decellularized structure of ADM, and no significant difference was detected with regards to the maximum tensile force when compared between NS-ADM and ADM (P = 0.351). NS-ADM was not cytotoxic to cell growth when the concentration of nano-silver solution ≤ 25 ppm and exhibited strong antibacterial activity in vitro. Besides, when rats were inoculated with 10⁴ CFU/mL, there were significantly lower bacterial counts in the NS-ADM group than in the ADM group when assessed seven days after surgery (P = 0.047); no significant differences were detected on days 14 and 28. Although there were no significant differences in bacterial counts on days 7, 14, or 21 between the two groups (rats were inoculated with 10⁶ CFU/mL), the number of rats showing reduced bacterial counts or clearing was higher in the NS-ADM group than in the ADM group. Rats that were inoculated with 10⁸ CFU/mL showed repair failure. Overall, NS-ADM is a promising antibacterial biomaterial for repairing contaminated soft-tissue defects, in which antibacterial properties are superior to ADM. The antibacterial activity of NS-ADM was limited for severe infections, and further in vivo studies are needed to evaluate its efficacy and biosafety.

Engineered magnetoactive collagen hydrogels with tunable and predictable mechanical response

In the present study, the synthesis of superparamagnetic collagen-based nanocomposite hydrogels with tunable swelling, mechanical and magnetic properties is reported. The fabrication strategy involved the preparation of pristine collagen type-I hydrogels followed by their immersion in highly stable aqueous solutions containing pre-formed double-layer oleic acid-coated hydrophilic magnetite nanoparticles (OA.OA.Fe₃O₄) at different concentrations, to interrogate nanoparticles' deposition within the 3D fibrous collagen matrix. Besides the investigation of the morphology, composition and magnetic properties of the produced materials, their mechanical properties were experimentally evaluated under confined compressive loading conditions while an exponential constitutive equation was employed to describe their mechanical response. Moreover, the deposition of the nanoparticles in the collagenous matrix was modeled mathematically with respect to the swelling of the gel and the effective stiffness of the matrix. The model recapitulated nanoparticle diffusion and deposition as well as hydrogel swelling, in terms of nanoparticles' size and concentration of OA.OA.Fe₃O₄ aqueous solution.

Novel Self-Healing Hydrogel with Injectable, pH-Responsive, Strain-Sensitive, Promoting Wound-Healing, and Hemostatic Properties Based on Collagen and Chitosan

Collagen (COL)-chitosan (CS) composite hydrogels are attracting increasing attention because of their great potential for application as biomaterials. However, conventional COL-CS hydrogels were easily disabled for lack of fully reversible linking in their networks. In this work, we developed a kind of self-healing hydrogel for wound dressing, composed of COL, CS, and dibenzaldehyde-modified PEG₂₀₀₀ via dynamic imine bonds, and the COL/CS hydrogels showed good thermal stability, injectability, and pH sensitivity, ideally promoting wound-healing performance and hemostatic ability. Furthermore, the hydrogel could monitor multiple human motions, especially the facial expression via strain sensitivity. This work offers a new perspective for the biomass-based hydrogels applied in medical field as wound dressing.

A facile and large-scale synthesis of a PVA/chitosan/collagen hydrogel for wound healing

PVA/chitosan/collagen hydrogel prepared by simple freezing and thawing method has high antibacterial properties and excellent wound healing ability.

Fabrication of High-Strength and Porous Hybrid Scaffolds Based on Nano-Hydroxyapatite and Human-Like Collagen for Bone Tissue Regeneration

A novel, three-dimensional, porous, human-like collagen (HLC)/nano-hydroxyapatite (n-HA) scaffold cross-linked by 1,2,7,8-diepoxyoctane (DEO) was successfully fabricated, which showed excellent mechanical and superior biological properties for bone tissue regeneration in this study. The physicochemical characterizations of different n-HA/HLC/DEO (nHD) scaffolds were investigated by determining the morphology, compression stress, elastic modulus, Young's modulus and enzymatic hydrolysis behavior in vitro. The results demonstrated that nHD-2 and nHD-3 scaffolds showed superior mechanical properties and resistance to enzymatic hydrolysis compared to nHD-1 scaffolds. The cell viability, live cell staining and cell adhesion analysis results demonstrated that nHD-2 scaffolds exhibited low cytotoxicity and excellent cytocompatibility compared with nHD-1 and nHD-3 scaffolds. Furthermore, subcutaneous injections of nHD-2 scaffolds in rabbits produced superior anti-biodegradation effects and histocompatibility compared with injections of nHD-1 and nHD-3 scaffolds after 1, 2 and 4 weeks. In addition, the repair of bone defects in rabbits demonstrated that nHD-2 scaffolds presented an improved ability for guided bone regeneration and reconstruction compared to commercially available bone scaffold composite hydroxyapatite/collagen (HC). Collectively, the results show that nHD-2 scaffolds show promise for application in bone tissue engineering due to their excellent mechanical properties, anti-biodegradation, anti-biodegradation, biocompatibility and bone repair effects.

Glycoproteins functionalized natural and synthetic polymers for prospective biomedical applications: A review

Glycoproteins have multidimensional properties such as biodegradability, biocompatibility, non-toxicity, antimicrobial and adsorption properties; therefore, they have wide range of applications. They are blended with different polymers such as chitosan, carboxymethyl cellulose (CMC), polyvinyl pyrrolidone (PVP), polycaprolactone (PCL), heparin, polystyrene fluorescent nanoparticles (PS-NPs) and carboxyl pullulan (PC) to improve their properties like thermal stability, mechanical properties, resistance to pH, chemical stability and toughness. Considering the versatile charateristics of glycoprotein based polymers, this review sheds light on synthesis and characterization of blends and composites of glycoproteins, with natural and synthetic polymers and their potential applications in biomedical field such as drug delivery system, insulin delivery, antimicrobial wound dressing uses, targeting of cancer cells, development of anticancer vaccines, development of new biopolymers, glycoproteome research, food product and detection of dengue glycoproteins. All the technical scientific issues have been addressed; highlighting the recent advancement.

Chitosan solutions as injectable systems for dermal filler applications: Rheological characterization and biological evidence

A new generation of dermal filler for wrinkle filler based on chitosan was compared to current hyaluronic acid-based dermal fillers by using a new rheological performance criterion based on viscosity during injection related to Newtonian viscosity. In addition an in vivo evaluation was performed for preclinical evidence of chitosan use as dermal filler. In this way, biocompatibility and dermis reconstruction was evaluated on a pig model.

Ovine tendon collagen: Extraction, characterisation and fabrication of thin films for tissue engineering applications

Collagen is the most abundant extracellular matrix (ECM) protein in the human body, thus widely used in tissue engineering and subsequent clinical applications. This study aimed to extract collagen from ovine (Ovis aries) Achilles tendon (OTC), and to evaluate its physicochemical properties and its potential to fabricate thin film with collagen fibrils in a random or aligned orientation. Acid-solubilized protein was extracted from ovine Achilles tendon using 0.35M acetic acid, and 80% of extracted protein was measured as collagen. SDS-PAGE and mass spectrometry analysis revealed the presence of alpha 1 and alpha 2 chain of collagen type I (col I). Further analysis with Fourier transform infrared spectrometry (FTIR), X-ray diffraction (XRD) and energy dispersive X-ray spectroscopy (EDS) confirms the presence of triple helix structure of col I, similar to commercially available rat tail col I. Drying the OTC solution at 37°C resulted in formation of a thin film with randomly orientated collagen fibrils (random collagen film; RCF). Introduction of unidirectional mechanical intervention using a platform rocker prior to drying facilitated the fabrication of a film with aligned orientation of collagen fibril (aligned collagen film; ACF). It was shown that both RCF and ACF significantly enhanced human dermal fibroblast (HDF) attachment and proliferation than that on plastic surface. Moreover, cells were distributed randomly on RCF, but aligned with the direction of mechanical intervention on ACF. In conclusion, ovine tendon could be an alternative source of col I to fabricate scaffold for tissue engineering applications.

Self-healing of thermally-induced, biocompatible and biodegradable protein hydrogel

Almost 100% self-healing extent recovery performance was observed in thermal-induced bovine serum albumin hydrogel with external heating. Good biocompatibility and biodegradability of this materials were also demonstrated.

A fluorescent, self-healing and pH sensitive hydrogel rapidly fabricated from HPAMAM and oxidized alginate with injectability

Multifunctional hydrogels were fabricated from HPAMAM and oxidized Alginate via electrostatic force, hydrogen bonds and acylhydrazone bonds. They are injectable, fluorescent, pH sensitive, biodegradable, and also able to release drug and self-heal.