ProFlow nano-liquid chromatography with a graphene oxide-functionalized monolithic nano-column for the simultaneous determination of chloramphenicol and chloramphenicol glucuronide in foods

Chloramphenicol (CAP) is an effective antibiotic with broad spectrum against gram-positive and gram-negative bacteria, while it is used to treat various infections in animals. Although CAP is banned for usage in the livestock products including, milk, honey, seafood, and royal jelly, CAP is still often detected in foods of animal origin, posing a threat to consumer health. The use of CAP is restricted in many countries due to its side effect in human metabolic process according to the Expert Committee on Food Additives (ECFA) recommendation. Chloramphenicol glucuronide (CAPG) is also a metabolic product of CAP, which may be a hazardous chemical for human health. Therefore, the development of sensitive separation and quantification method is an important issue, especially for food safety. Herein, we reported the preparation and application of a monolithic nano-column for CAP and CAPG analyses in foods by ProFlow Nano liquid chromatography (ProFlow Nano LC). The monolithic nano-column was prepared by an in situ polymerization using 3-chloro-2-hydroxypropylmethacrylate (HPMA-Cl) and ethylene dimethacrylate (EDMA) and followed graphene oxide (GO) modification. After characterization, the monolithic nano-column was used for the analysis of CAP and CAPG in honey and milk samples by ProFlow Nano LC. The whole method was validated in terms of linearity, sensitivity, precision, recovery, and repeatability, while it led to obtain high sensitivity with limit of quantification was found as 0.02 µg/kg for CAP. Limit of quantification for CAPG was found as 0.08 µg/kg. The developed method with monolithic nano-column was optimized to achieve very sensitive analyses of CAP and CAPG in the food samples. The applicability of the nano-column was successfully demonstrated by the analysis of CAP and CAPG in milk and honey samples. PRACTICAL APPLICATION: This article describes the preparation and application of a monolithic nano-column for the separation and determination of chloramphenicol and chloramphenicol glucuronide in food samples by ProFlow Nano LC. The use of new and advanced techniques is a crucial issue in the food science and technology. In this sense, this study demonstrated a new food analysis method using advanced instrumental technique with a homemade monolithic nano-column.

Graphene oxide-octadecylsilane incorporated monolithic nano-columns with 50 μm id and 100 μm id for small molecule and protein separation by nano-liquid chromatography

In this study, graphene oxide-octadecylsilane incorporated monolithic nano-columns were developed for protein analysis by nano liquid chromatography (nano LC). The monolithic column with 100 μm id was first prepared by an in situ polymerization using ethylene dimethacrylate (EDMA), 3-chloro-2-hydroxypropylmethacrylate (HPMA-Cl), and methacryloyl graphene oxide nanoparticles (MGONPs). MGONPs were synthesized by the treatment of 3-(trimethoxysilyl)propylmethacrylate (TMSPM) and GO. Tetrahydrofuran (THF) and dodecanol were used as the porogenic solvent. The resulting column was functionalized by dimethyloctadecylch lorosilane (DODCS) for the enhancement of hydrophobicity. The functionalization greatly improved the baseline separation of hydrophobic compounds such as polyaromatic hydrocarbons (PAHs). The optimized monolith with respect to total polymerization mixture was characterized by using Fourier-transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM) X-ray diffraction (XRD) and chromatographic analyses. The blank monoliths without functionalization exhibited poor separation while a good separation performance of MGONPs functionalized monoliths was achieved. The monolith with 100 μm id was evaluated in protein separation in nano LC using RNase A, Cytochrome C, Lysozyme, Trypsin, and Ca isozyme II as the test proteins. It was shown that protein separation mechanism was based on large π-system of GO and hydrophobicity of the monolithic structure. Theoretical plates number up to 57 600 plates were achieved. The nano-column with 50 μm id was also prepared using the same polymerization mixture under the same chemical conditions. These nano-columns were employed for protein separation by nano LC, and the dependence of both nano-column performance on the internal diameter was also discussed.

Enantiomeric Recognition and Separation by Chiral Nanoparticles

Chiral molecules are stereoselective with regard to specific biological functions. Enantiomers differ considerably in their physiological reactions with the human body. Safeguarding the quality and safety of drugs requires an efficient analytical platform by which to selectively probe chiral compounds to ensure the extraction of single enantiomers. Asymmetric synthesis is a mature approach to the production of single enantiomers; however, it is poorly suited to mass production and allows for only specific enantioselective reactions. Furthermore, it is too expensive and time-consuming for the evaluation of therapeutic drugs in the early stages of development. These limitations have prompted the development of surface-modified nanoparticles using amino acids, chiral organic ligands, or functional groups as chiral selectors applicable to a racemic mixture of chiral molecules. The fact that these combinations can be optimized in terms of sensitivity, specificity, and enantioselectivity makes them ideal for enantiomeric recognition and separation. In chiral resolution, molecules bond selectively to particle surfaces according to homochiral interactions, whereupon an enantiopure compound is extracted from the solution through a simple filtration process. In this review article, we discuss the fabrication of chiral nanoparticles and look at the ways their distinctive surface properties have been adopted in enantiomeric recognition and separation.

New platform for simple and rapid protein-based affinity reactions

We developed a spongy-like porous polymer (spongy monolith) consisting of poly(ethylene-co-glycidyl methacrylate) with continuous macropores that allowed efficient in situ reaction between the epoxy groups and proteins of interest. Immobilization of protein A on the spongy monolith enabled high-yield collection of immunoglobulin G (IgG) from cell culture supernatant even at a high flow rate. In addition, immobilization of pepsin on the spongy monolith enabled efficient online digestion at a high flow rate.

Carboxylated single-walled carbon nanotube-functionalized chiral polymer monoliths for affinity capillary electrochromatography

Carboxylated single-walled carbon nanotubes (c-SWNTs) were incorporated into poly(glycidylmethacrylate-co-ethylene glycol dimethacrylate) [poly(GMA-co-EDMA)] monoliths to develop a novel monolithic stationary phase for capillary electrochromatography. The prepared monoliths were characterized by scanning electron microscopy and nitrogen adsorption. Additionally, pepsin, which is a chiral selector, was bonded to the c-SWNT-incorporated monoliths via epoxide groups as reactive sites and glutaraldehyde as the spacer. The effects of the c-SWNT concentration on chiral separation were investigated, and the results suggested that the c-SWNTs played a significant role in improving the separation efficiency, although pepsin was the dominant element in determining the chiral recognition ability of the monolith. Moreover, the influences of buffer pH, operating voltage and sample volume were also studied with (±)-nefopam as a model drug. Under the optimized conditions, the pepsin-modified poly(GMA-c-SWNTs-EDMA) monolith exhibited excellent enantioseparation performance for ten pairs of basic chiral drugs and extended the scope of chiral separation of drug enantiomers.

Bacterial Electron Transfer Chains Primed by Proteomics

Electron transport phosphorylation is the central mechanism for most prokaryotic species to harvest energy released in the respiration of their substrates as ATP. Microorganisms have evolved incredible variations on this principle, most of these we perhaps do not know, considering that only a fraction of the microbial richness is known. Besides these variations, microbial species may show substantial versatility in using respiratory systems. In connection herewith, regulatory mechanisms control the expression of these respiratory enzyme systems and their assembly at the translational and posttranslational levels, to optimally accommodate changes in the supply of their energy substrates. Here, we present an overview of methods and techniques from the field of proteomics to explore bacterial electron transfer chains and their regulation at levels ranging from the whole organism down to the Ångstrom scales of protein structures. From the survey of the literature on this subject, it is concluded that proteomics, indeed, has substantially contributed to our comprehending of bacterial respiratory mechanisms, often in elegant combinations with genetic and biochemical approaches. However, we also note that advanced proteomics offers a wealth of opportunities, which have not been exploited at all, or at best underexploited in hypothesis-driving and hypothesis-driven research on bacterial bioenergetics. Examples obtained from the related area of mitochondrial oxidative phosphorylation research, where the application of advanced proteomics is more common, may illustrate these opportunities.

Monolithic stationary phases with incorporated fumed silica nanoparticles. Part I. Polymethacrylate-based monolithic column with incorporated bare fumed silica nanoparticles for hydrophilic interaction liquid chromatography

Fumed silica nanoparticles (FSNPs), were incorporated for the first time into a polymethacrylate monolithic column containing glyceryl monomethacrylate (GMM) and ethylene dimethacrylate (EDMA) in order to develop a new monolithic column for hydrophilic interaction high performance liquid chromatography (HILIC). When compared to poly(GMM-EDMA) monolithic column without FSNPs, the same monolithic column with incorporated FSNPs yielded important effects on HILIC separations. The effects of monomers and FSNPs content of the polymerization mixture on the performance of the monolithic column were examined in details, and the optimized stationary phase was investigated over a wide range of mobile phase composition with polar acidic, weakly basic and neutral analytes including hydroxy benzoic acids, nucleotides, nucleosides, dimethylformamide, formamide and thiourea. The retention of these analytes was mainly controlled by hydrophilic interactions with the FSNPs and electrostatic repulsion from the negatively charged silica surface in the case of hydroxy benzoic acids and nucleotides. The electrostatic repulsion was minimized by decreasing the pH of the aqueous component of the mobile phase, which in turn enhanced the retention of acidic solutes. Nucleotides were best separated using step gradient elution at decreasing pH as well as ACN concentration in the mobile phase. Improved peak shape and faster analysis of nucleosides were attained by a fast linear gradient elution with a shallow decrease in the ACN content of the ACN-rich mobile phase. The run-to-run and column-to-column reproducibility were satisfactory. The percent relative standard deviations (%RSDs) for the retention times of tested solutes were lower than 2.5% under isocratic conditions and lower than 3.5 under gradient conditions.

Polystyrene-co-Divinylbenzene PolyHIPE Monoliths in 1.0 mm Column Formats for Liquid Chromatography

The reversed phase liquid chromatographic (RP-HPLC) separation of small molecules using a polystyrene-co-divinylbenzene (PS-co-DVB) polyHIPE stationary phases housed within 1.0 mm i.d. silcosteel columns is presented within this study. A 90% PS-co-DVB polyHIPE was covalently attached to the walls of the column housing by prior wall modification with 3-(trimethoxysilyl) propyl methacrylate and could withstand operating backpressures in excess of 200 bar at a flow rate of 1.2 mL/min. Permeability studies revealed that the monolith swelled slightly in 100% acetonitrile relative to 100% water but could nevertheless be used to separate five alkylbenzenes using a flow rate of 40 µL/min (linear velocity: 0.57 mm/s). Remarkable column-to-column reproducibility is shown with retention factor variation between 2.6% and 6.1% for two separately prepared columns.

Development and characteristics of polymer monoliths for advanced LC bioscreening applications: A review

Biomedical research advances over the past two decades in bioseparation science and engineering have led to the development of new adsorbent systems called monoliths, mostly as stationary supports for liquid chromatography (LC) applications. They are acknowledged to offer better mass transfer hydrodynamics than their particulate counterparts. Also, their architectural and morphological traits can be tailored in situ to meet the hydrodynamic size of molecules which include proteins, pDNA, cells and viral targets. This has enabled their development for a plethora of enhanced bioscreening applications including biosensing, biomolecular purification, concentration and separation, achieved through the introduction of specific functional moieties or ligands (such as triethylamine, N,N-dimethyl-N-dodecylamine, antibodies, enzymes and aptamers) into the molecular architecture of monoliths. Notwithstanding, the application of monoliths presents major material and bioprocess challenges. The relationship between in-process polymerisation characteristics and the physicochemical properties of monolith is critical to optimise chromatographic performance. There is also a need to develop theoretical models for non-invasive analyses and predictions. This review article therefore discusses in-process analytical conditions, functionalisation chemistries and ligands relevant to establish the characteristics of monoliths in order to facilitate a wide range of enhanced bioscreening applications. It gives emphasis to the development of functional polymethacrylate monoliths for microfluidic and preparative scale bio-applications.

Preparation of an aptamer based organic–inorganic hybrid monolithic column with gold nanoparticles as an intermediary for the enrichment of proteins

Gold nanoparticles are used as an intermediary in a sandwich structure for the preparation of an aptamer-based organic–inorganic hybrid affinity monolithic column.

Rapid HPLC-DAD quantitation of sulfonamides in honey using poly(methacrylic acid-ethylene dimethacrylate) monolith modified with 3-(trimethoxysilyl)propyl methacrylate-grafted sodium titanate nanotubes

Poly(methacrylic acid-ethylene dimethacrylate) monolith modified with 3-(trimethoxysilyl)propyl methacrylate-grafted sodium titanate nanotubes was prepared for microextraction of sulfonamides.

Titration of gold nanoparticles in phase extraction

Spectrophotometric analysis of phase extraction determines the percentage of ion pairing and structural changes in the capping monolayer of gold nanoparticles.