A graphene oxide-based enzyme-free signal amplification platform for homogeneous DNA detection

Label-Free Homogeneous microRNA Detection in Cell Culture Medium Based on Graphene Oxide and Specific Fluorescence Quenching

Label-free homogeneous optical detection of low concentration of oligonucleotides using graphene oxide in complex solutions containing proteins remains difficult. We used a colloidal graphene oxide (GO) as a fluorescent probe quencher to detect microRNA-21 spiked-in cell culture medium, overcoming previously reported problematic aspects of protein interference with graphene oxide. We used a "turn off" assay for specific quenching-based detection of oligo DNA-microRNA hybridization in solution. A fluorescein conjugated 30-mer single-stranded DNA (ssDNA) probe was combined with a complementary synthetic microRNA (18 nucleotides) target. The probe-target hybridization was detected by specific quenching due to photoinduced electron transfer (PET). On the next step, GO captures and quenches the unhybridized probe by fluorescence resonance energy transfer (FRET) in the presence of cell culture medium supplemented with platelet lysate, 0.1% sodium dodecyl sulfate (SDS), 0.1% Triton X-100 and 50% formamide. This resulted in sensitive measurement of the specific probe-target complexes remaining in solution. The detection is linear in the range of 1 nM and 8 nM in a single 100 μL total volume assay sample containing 25% cell culture medium supplemented with platelet lysate. We highlight a general approach that may be adopted for microRNA target detection within complex physiological media.

A sensitive biomolecules detection device with catalytic hairpin assembly and cationic conjugated polymer-assisted dual signal amplification strategy

A simple, sensitive, selective, and enzyme-free homogeneous fluorescent biosensing device for DNA and protein detection is fabricated based on catalytic hairpin assembly (CHA), cationic conjugated polymer (CCP), and graphene oxide (GO). In this biosensing device, CCP together with CHA, provides dual signal amplification, and GO suppresses the background when the target is absent. Thus, this CHA/CCP/GO-based biosensor shows improved sensitivity compared with conventional CHA-based biosensors. In the biosensor, two 6-carboxyfluorescein (FAM)-labeled hairpin DNA probes (H1 and H2) are designed, and in the initial state, they could absorb on the surface of GO, leading the system to produce a low background fluorescence signal. When the target DNA appears, it continually catalyzes the formation of H1-H2 double-stranded DNA (dsDNA) complex by CHA reaction, which could be regarded as the first-step amplification. At the same time, the H1-H2 dsDNA complex departures from the surface of GO and interacts with CCP through electrostatic interaction. Then, CCP provides the second-step amplification due to its high fluorescence resonance energy transfer (FRET) efficiency from CCP to FAM. The limit of detection (LOD) and the limit of quantification (LOQ) for the target DNA could reach 32 pM and 1 nM, respectively. The linear range was from 0.1 to 40 nM, and relative standard deviation (RSD) for the points on the calibration curve ranged from 2.8% to 13.9%. This strategy could also be applied to protein detection potentially by integrating the aptamer of the target protein into the hairpin DNA. As proof of concept, thrombin was detected, and the LOD and LOQ was 11 pM and 33 pM, respectively. The linear range was from 3 to 54 nM, and RSD ranged from 3.3% to 10.4%. It showed good selectivity for thrombin compared to equal concentrations of interferences. It was also applied to quantify the thrombin (5, 10, 20 nM) in 1% spiked human serum, which showed satisfying recovery in the range of 94.7 ± 5.3 to 103.7 ± 4.9%.

Dual catalytic DNA circuit-induced gold nanoparticle aggregation: An enzyme-free and colorimetric strategy for amplified detection of nucleic acids

An enzyme-free dual catalytic DNA circuit for amplified detection of nucleic acids has been developed. The system functions based on a cyclic self-assembly of two auxiliary hairpins (H1 and H2) and three biotinylated hairpin oligonucleotides (H3, H4 and H5), in the format of two molecular circuits. In the upstream circuit, a target initiator (I) besides H1 and H2 hairpins constructs H1-H2 duplexes that trigger the operation of a subsequent circuit. In the downstream circuit, the H1-H2 duplex initiates cascaded self-assembly reactions, produces triplex H3-H4-H5, as sensing system, and releases the H1-H2 duplex as the catalyst for the self-assembly of additional hairpins. The H3-H4-H5 triplex acts as the scaffolds for assembling and orienting the streptavidin-functionalized gold nanoparticles (SA-AuNPs) into a lattice-like arrangement that generates a DNA-SA-AuNP cross-linked network, resulting in a dramatic pale red-to-blue color change. By ingeniously engaging two catalytic circuits with feedback amplification capabilities, the system can detect the target nucleic acid with an LOD value of 5 femtomolar and unambiguously discriminate spurious targets (i.e. targets containing substitution, insertion, and deletion nucleotides) without instrumentation. Simple and convenient operation of the assay makes the DNA circuit appropriate for point-of-care monitoring in resource-constrained settings.

A cationic conjugated polymer and graphene oxide: Application to amplified fluorescence detection of sinapine

An amplified fluorescence strategy is described for the detection of sinapine (SP) by using a cationic conjugated polymer (PFP) and graphene oxide (GO). It is observed that the fluorescein (FAM)-labeled single-stranded DNA (FAM-DNA) is absorbed on the surface of GO if SP is absent. This causes that fluorescence resonance energy transfer (FRET) from PFP to FAM is inefficient when adding PFP into FAM-DNA/GO complex. If SP is added to FAM-DNA/GO complex, FAM-DNA is desorbed from GO surface due to the competitive binding of SP and FAM-DNA toward GO. In this case, FAM-DNA is close to PFP in the presence of PFP through strong electrostatic interaction, leading to the occurrence of efficient FRET. Based on the above phenomenon, we demonstrate a method to amplify fluorescence signal of traditional GO-based SP assay by introducing PFP. In comparison to the use of single GO, the combination of PFP with GO-based strategy displays high turn-on ratio and enhanced sensitivity with a limit of detection as low as 7.3 ng mL^-1 for SP detection. Satisfactory results in practical samples are also obtained by the recovery experiments, demonstrating the potential application of cationic conjugated polymer in plant-derived small molecule.

Enzyme-free, signal-amplified nucleic acid circuits for biosensing and bioimaging analysis

Enzyme-free, signal-amplified nucleic acid circuits utilize programmed assembly reactions between nucleic acid substrates to transduce a chemical input into an amplified detection signal.

Biosensors based on graphene oxide and its biomedical application

Graphene oxide (GO) is one of the most attributed materials for opening new possibilities in the development of next generation biosensors. Due to the coexistence of hydrophobic domain from pristine graphite structure and hydrophilic oxygen containing functional groups, GO exhibits good water dispersibility, biocompatibility, and high affinity for specific biomolecules as well as properties of graphene itself partly depending on preparation methods. These properties of GO provided a lot of opportunities for the development of novel biological sensing platforms, including biosensors based on fluorescence resonance energy transfer (FRET), laser desorption/ionization mass spectrometry (LDI-MS), surface-enhanced Raman spectroscopy (SERS), and electrochemical detection. In this review, we classify GO-based biological sensors developed so far by their signal generation strategy and provide the comprehensive overview of them. In addition, we offer insights into how the GO attributed in each sensor system and how they improved the sensing performance.

DNA base-stacking assay utilizing catalytic hairpin assembly-induced gold nanoparticle aggregation for colorimetric protein sensing

A label-free and enzyme-free colorimetric sensing platform for the amplified detection of fibronectin was developed based on an ingenious combination of catalytic hairpin assembly and a base stacking hybridization-based gold nanoparticle aggregation strategy.

Bovine α-lactalbumin functionalized graphene oxide nano-sheet exhibits enhanced biocompatibility: A rational strategy for graphene-based targeted cancer therapy

Graphene oxide nanosheet (GOns) with sharp edges was synthesized using controlled pyrolysis of citric acid. Scanning electron, as well as atomic force microscopy of the sample confirmed the formation of multilayered GOns with an average sheet length of 150 nm. X-ray diffraction pattern and Raman spectra also confirmed the formation of GOns. Furthermore, GOns was successfully functionalized (FGOns) by cross-linking with a small protein bovine α-lactalbumin (BLA). The crosslinking of protein with GOns in FGOns was confirmed by infrared spectroscopy, and the conformational change of BLA was observed by fluorescence, as well as circular dichroism spectroscopy. When applied to human erythrocytes, GOns demonstrated profound hemolysis; however, such hemolytic effect was drastically reduced by FGOns. To evaluate the potential biomedical application of FGOns, the cytotoxicity of the sample was also assessed. The administration of both GOns and FGOns in breast cancer cells MCF-7 and MDAMB-231 demonstrated more than 88% cell death within 24 h and such cytotoxicity against cancer cells was caused due to the generation of reactive oxygen species (ROS), as revealed from the N-acetyl-L-cysteine (NAC, a ROS-inhibitor)-based assay. FGOns demonstrated excellent biocompatibility against normal cells such as HaCaT and 3T3 compared to GOns that demonstrated dose-dependent toxicity. Moreover, FGOns demonstrated more efficient cellular uptake than GOns by cancer cells. Therefore, our present study demonstrated that the functionalization of GOns using small protein could improve its biocompatibility multifold and such strategy might represent wide opportunity to use GO like nanomaterial safely in various biomedical applications.

Synthesis of a highly dispersive sinapinic acid@graphene oxide (SA@GO) and its applications as a novel surface assisted laser desorption/ionization mass spectrometry for proteomics and pathogenic bacteria biosensing

GO-modified sinapinic acid was synthesized and characterized; it was then investigated for use in SALDI-MS for proteomics and pathogenic bacterial biosensing.