Fast fabrication of a hybrid monolithic column containing cyclic and aliphatic hydrophobic ligands via photo-initiated thiol-ene polymerization

Three monomers, octakis (3-mercaptopropyl) octasilsesquioxane, 1,2,4-trivinylcyclohexane and isophytol were employed to synthesize a novel monolithic stationary phase via photo-initiated thiol-ene click polymerization for reversed-phase liquid chromatography. Several factors such as porogenic system, reaction time and the molar ratio of functional groups were investigated in detail. The resulting poly(POSS-co-TVCH-co-isophytol) monolithic column exhibited suitable permeability for fast separation and outstanding thermal stability. Five alkylbenzenes were employed to evaluate the ability of chromatographic separation of the resulting monolithic columns at different flow rates, and showed the highest column efficiencies of 90,200-93,100 N/m (corresponding to 10.4-10.6 μm of plate height) at a velocity of 0.41 mm/s. The baseline separations of five anilines and eight phenols further proved the applicability of poly(POSS-co-TVCH-co-isophytol) monolithic column in the separation of small molecules.

Preparation of a long-alkyl-chain-based hybrid monolithic column with mixed-mode interactions using a "one-pot" process for pressurized capillary electrochromatography

A simple "one-pot" approach for the preparation of a new vinyl-functionalized organic-inorganic hybrid monolithic column is described. In this improved method, the hydrolyzed alkoxysilanes of tetramethoxysilane and triethoxyvinylsilane were used as precursors for the synthesis of a silica-based monolith, while 1-hexadecene and sodium ethylenesulfonate were used as vinyl functional monomers along with azobisisobutyronitrile as an initiator. The effects of reaction temperature, urea content, and composition of organic monomers on the column properties (e.g. morphology, mechanical stability, and chromatographic performance) were investigated. The monolithic column was used for the separation of neutral solutes by reversed-phase pressurized capillary. Furthermore, the monolith can separate various aromatic amines, which indicated its excellent cation-exchange capability and hydrophobic interactions. The baseline separation of the aromatic amines was obtained with a column efficiency of up to 78 000 plates/m.

One pot synthesis of carboxyl functionalized-polyhedral oligomeric siloxane based monolith via photoinitiated thiol-methacrylate polymerization for nano-hydrophilic interaction chromatography

A hybrid monolith exhibiting almost retention independent separation performance in hydrophilic interaction chromatography (HILIC) was obtained by one-pot photoinitiated thiol-methacrylate polymerization. Polyhedral oligomeric silsesquioxane containing methacrylate units (POSS-MA) was used as the main monomer and crosslinking agent, together with a hydrophilic ligand with two carboxyl groups, mercaptosuccinic acid (MSA) as the thiol agent and chromatographic ligand. The isocratic separation of nucleosides, nucleotides and organic acids on MSA attached-poly(POSS-MA) monolith was investigated in HILIC mode. The van-Deemter plots for obtained for nucleosides, nucleotides and benzoic acids clearly showed that there were two regions in each graph with two different slopes in the studied range of linear flow rate (i.e. 0.2-4.3mm/s). The slope of plate height-linear velocity curve was so small in the low linear velocity region between 0.2-2.1mm/s while the slope in high linear velocity region between 2.1-4.3mm/s was so higher with respect to the first region. The van-Deemter plots sketched for all analyte grous used in HILIC mode obeyed this tendency Almost "retention independent plate height behavior" was demonstrated in HILIC, using nucleotides, nucleotides or benzoic acids as the analytes in the linear velocity range of 0.2-2.1mm/s. This behavior was explained by the porous structure of the synthesized monolith facilitating the convective transport of analytes. The variation of plate height was not retention-independent within high linear velocity range (>3.2mm/s) when nucleosides were separated in HILIC mode.

Graphene oxide-based silsesquioxane-crosslinked networks – synthesis and rheological behavior

Click reaction between octa(3-azidopropyl)polyhedral oligomeric silsesquioxane (POSS–(N₃)₈) and heavily alkyne-decorated graphene oxide (GO) has led to crosslinking POSS with GO.

Facile one-pot preparation of an imidazolium embedded C8 hybrid monolith using polyhedral oligomeric silsesquioxane for capillary liquid chromatography

In this study, a novel imidazolium embedded C₈ hybrid monolithic column based on polyhedral oligomeric silsesquioxane (POSS) was developed.