PDMS as a Substrate for Lipid Bilayers

PDMS (polydimethylsiloxane) is a cheap, optically clear polymer that is elastic and can be easily and quickly fabricated into a wide array of microscale and nanoscale architectures, making it a versatile substrate for biophysical experiments on cell membranes. It is easy to imagine many new experiments will be devised that require a bilayer to be placed upon a substrate that is flexible or easily cast into a desired geometry, such as in lab-on-a-chip, organ-on-chip, and microfluidic applications, or for building accurate membrane models that replicate the surface structure and elasticity of the cytoskeleton. However, PDMS has its limitations, and the extent to which the behavior of membranes is affected on PDMS has not been fully explored. We use AFM and fluorescence optical microscopy to investigate the use of PDMS as a substrate for the formation and study of supported lipid bilayers (SLBs). Lipid bilayers form on plasma-treated PDMS and show free diffusion and normal phase transitions, confirming its suitability as a model bilayer substrate. However, lipid-phase separation on PDMS is severely restricted due to the pinning of domains to surface roughness, resulting in the cessation of lateral hydrodynamic flow. We show the high-resolution porous structure of PDMS and the extreme smoothing effect of oxygen plasma treatment used to hydrophilize the surface, but this is not flat enough to allow domain formation. We also observe bilayer degradation over hour timescales, which correlates with the known hydrophobic recovery of PDMS, and establish a critical water contact angle of 30°, above which bilayers degrade or not form at all. Care must be taken as incomplete surface oxidation and hydrophobic recovery result in optically invisible membrane disruption, which will also be transparent to fluorescence microscopy and lipid diffusion measurements in the early stages.

Proteolysis-targeting chimeras in biotherapeutics: Current trends and future applications

The success of inhibitor-based therapeutics is largely constrained by the acquisition of therapeutic resistance, which is partially driven by the undruggable proteome. The emergence of proteolysis targeting chimera (PROTAC) technology, designed for degrading proteins involved in specific biological processes, might provide a novel framework for solving the above constraint. A heterobifunctional PROTAC molecule could structurally connect an E3 ubiquitin ligase ligand with a protein of interest (POI)-binding ligand by chemical linkers. Such technology would result in the degradation of the targeted protein via the ubiquitin-proteasome system (UPS), opening up a novel way of selectively inhibiting undruggable proteins. Herein, we will highlight the advantages of PROTAC technology and summarize the current understanding of the potential mechanisms involved in biotherapeutics, with a particular focus on its application and development where therapeutic benefits over classical small-molecule inhibitors have been achieved. Finally, we discuss how this technology can contribute to developing biotherapeutic drugs, such as antivirals against infectious diseases, for use in clinical practices.

Role of phosphatidylserine in amyloid-beta oligomerization at asymmetric phospholipid bilayers

Amyloid-beta (Aβ_1-42) aggregation triggers neurotoxicity and is linked to Alzheimer's disease. Aβ_1-42 oligomers, rather than extended fibrils, adhere to the cell membrane, causing cell death. Phosphatidylserine (PS), an anionic phospholipid, is prevalent in neuronal membranes (< 20 molar percentage) and, while isolated to the cytoplasmic leaflet of the membrane in healthy cells, its exposure in apoptotic cells and migration to exoplasmic leaflet is triggered by oxidative damage to the membrane. It is widely believed that PS plays a crucial role in the Aβ peptide interaction in the membranes of neuronal cells. However, due to the complexity of the cell membrane, it can be challenging to address molecular level understanding of the PS-Aβ binding and oligomerization processes. Herein, we use microcavity supported lipid bilayers (MSLBs) to analyse PS and Aβ_1-42 binding, oligomer formation, and membrane damage. MSLBs are a useful model to evaluate protein-membrane interactions because of their cell-like dual aspect fluidity, their addressability and compositional versatility. We used electrochemical impedance spectroscopy (EIS) and confocal fluorescence microscopy to compare the impact of Aβ_1-42 on simple zwitterioinic membrane, dioleoylphosphatidylcholine (DOPC), with MSLBs comprised of transversally asymmetric binary DOPC and dioleoylphosphatidylserine (DOPS). Monomeric Aβ_1-42 adsorbs weakly to the pristine zwitterionic DOPC membrane without aggregation. Using a membrane integrity test, with pyranine trapped within the cavities beneath the membrane, Aβ_1-42 exposure did not result in pyranine leakage, indicating that DOPC membranes were intact. When 10 mol% DOPS was doped asymmetrically into the membrane's outer leaflet, oligomerization of Aβ_1-42 monomer was evident in EIS and atomic force microscopy (AFM), and confocal imaging revealed that membrane damage, resulted in extensive pyranine leakage from the pores. The effects were time, and DOPS and Aβ_1-42 concentration-dependent. Membrane pore formation was visible within 30 minutes, and oligomerization, membrane-oligomer multilayer, and Aβ_1-42 fibril formation evident over 3 to 18 hours. In asymmetric membranes with DOPS localized to the lower leaflet, optothermally (laser induced) damage increased local DOPS concentrations at the distal leaflet, promoting Aβ_1-42 aggregation.

Galectin-3 Binding to α5β1 Integrin in Pore Suspended Biomembranes

Galectin-3 (Gal3) is a β-galactoside binding lectin that mediates many physiological functions, including the binding of cells to the extracellular matrix for which the glycoprotein α₅β₁ integrin is of critical importance. The mechanisms by which Gal3 interacts with membranes have not been widely explored to date due to the complexity of cell membranes and the difficulty of integrin reconstitution within model membranes. Herein, to study their interaction, Gal3 and α₅β₁ were purified, and the latter reconstituted into pore-suspended lipid bilayers comprised eggPC:eggPA. Using electrochemical impedance and fluorescence lifetime correlation spectroscopy, we found that on incubation with low nanomolar concentrations of wild-type Gal3, the membrane's admittance and fluidity, as well as integrin's lateral diffusivity, were enhanced. These effects were diminished in the following conditions: (i) absence of integrin, (ii) presence of lactose as a competitive inhibitor of glycan-Gal3 interaction, and (iii) use of a Gal3 mutant that lacked the N-terminal oligomerization domain (Gal3ΔNter). These findings indicated that WTGal3 oligomerized on α₅β₁ integrin in a glycan-dependent manner and that the N-terminal domain interacted directly with membranes in a way that is yet to be fully understood. At concentrations above 10 nM of WTGal3, membrane capacitance started to decrease and very slowly diffusing molecular species appeared, which indicated the formation of protein clusters made from WTGal3-α₅β₁ integrin assemblies. Overall, our study demonstrates the capacity of WTGal3 to oligomerize in a cargo protein-dependent manner at low nanomolar concentrations. Of note, these WTGal3 oligomers appeared to have membrane active properties that could only be revealed using our sensitive methods. At slightly higher WTGal3 concentrations, the capacity to generate lateral assemblies between cargo proteins was observed. In cells, this could lead to the construction of tubular endocytic pits according to the glycolipid-lectin (GL-Lect) hypothesis or to the formation of galectin lattices, depending on cargo glycoprotein stability at the membrane, the local Gal3 concentration, or plasma membrane intrinsic parameters. The study also demonstrates the utility of microcavity array-suspended lipid bilayers to address the biophysics of transmembrane proteins.

Multimodal Investigation into the Interaction of Quinacrine with Microcavity-Supported Lipid Bilayers

Quinacrine is a versatile drug that is widely recognized for its antimalarial action through its inhibition of the phospholipase enzyme. It also has antianthelmintic and antiprotozoan activities and is a strong DNA binder that may be used to combat multidrug resistance in cancer. Despite extensive cell-based studies, a detailed understanding of quinacrine's influence on the cell membrane, including permeability, binding, and rearrangement at the molecular level, is lacking. Herein, we apply microcavity-suspended lipid bilayers (MSLBs) as in vitro models of the cell membrane comprising DOPC, DOPC:Chol(3:1), and DOPC:SM:Chol(2:2:1) to investigate the influence of cholesterol and intrinsic phase heterogeneity induced by mixed-lipid composition on the membrane interactions of quinacrine. Using electrochemical impedance spectroscopy (EIS) and surface-enhanced Raman spectroscopy (SERS) as label-free surface-sensitive techniques, we have studied quinacrine interaction and permeability across the different MSLBs. Our EIS data reveal that the drug is permeable through ternary DOPC:SM:Chol and DOPC-only bilayer compositions. In contrast, the binary cholesterol/DOPC membrane arrested permeation, yet the drug binds or intercalates at this membrane as reflected by an increase in membrane impedance. SERS supported the EIS data, which was utilized to gain structural insights into the drug-membrane interaction. Our SERS data also provides a simple but powerful label-free assessment of drug permeation because a significant SERS enhancement of the drug's Raman signature was observed only if the drug accessed the plasmonic interior of the pore cavity passing through the membrane. Fluorescent lifetime correlation spectroscopy (FLCS) provides further biophysical insight, revealing that quinacrine binding increases the lipid diffusivity of DOPC and the ternary membrane while remarkably decreasing the lipid diffusivity of the DOPC:Chol membrane. Overall, because of its adaptability to multimodal approaches, the MSLB platform provides rich and detailed insights into drug-membrane interactions, making it a powerful tool for in vitro drug screening.

Shorter Alkyl Chains Enhance Molecular Diffusion and Electron Transfer Kinetics between Photosensitisers and Catalysts in CO2 -Reducing Photocatalytic Liposomes

Covalent functionalisation with alkyl tails is a common method for supporting molecular catalysts and photosensitisers onto lipid bilayers, but the influence of the alkyl chain length on the photocatalytic performances of the resulting liposomes is not well understood. In this work, we first prepared a series of rhenium-based CO₂ -reduction catalysts [Re(4,4'-(C_n H_2n+1 )₂ -bpy)(CO)₃ Cl] (ReC_n ; 4,4'-(C_n H_2n+1 )₂ -bpy=4,4'-dialkyl-2,2'-bipyridine) and ruthenium-based photosensitisers [Ru(bpy)₂ (4,4'-(C_n H_2n+1 )₂ -bpy)](PF₆ )₂ (RuC_n ) with different alkyl chain lengths (n=0, 9, 12, 15, 17, and 19). We then prepared a series of PEGylated DPPC liposomes containing RuC_n and ReC_n , hereafter noted C_n , to perform photocatalytic CO₂ reduction in the presence of sodium ascorbate. The photocatalytic performance of the C_n liposomes was found to depend on the alkyl tail length, as the turnover number for CO (TON) was inversely correlated to the alkyl chain length, with a more than fivefold higher CO production (TON=14.5) for the C₉ liposomes, compared to C₁₉ (TON=2.8). Based on immobilisation efficiency quantification, diffusion kinetics, and time-resolved spectroscopy, we identified the main reason for this trend: two types of membrane-bound RuC_n species can be found in the membrane, either deeply buried in the bilayer and diffusing slowly, or less buried with much faster diffusion kinetics. Our data suggest that the higher photocatalytic performance of the C₉ system is due to the higher fraction of the more mobile and less buried molecular species, which leads to enhanced electron transfer kinetics between RuC₉ and ReC₉ .

Robust Photoelectric Biomolecular Switch at a Microcavity-Supported Lipid Bilayer

Biomolecular devices based on photo-responsive proteins have been widely proposed for medical, electrical, and energy storage and production applications. Also, bacteriorhodopsin (bR) has been extensively applied in such prospective devices as a robust photo addressable proton pump. As it is a membrane protein, in principle, it should function most efficiently when reconstituted into a fully fluid lipid bilayer, but in many model membranes, lateral fluidity of the membrane and protein is sacrificed for electrochemical addressability because of the need for an electroactive surface. Here, we reported a biomolecular photoactive device based on light-activated proton pump, bR, reconstituted into highly fluidic microcavity-supported lipid bilayers (MSLBs) on functionalized gold and polydimethylsiloxane cavity array substrates. The integrity of reconstituted bR at the MSLBs along with the lipid bilayer formation was evaluated by fluorescence lifetime correlation spectroscopy, yielding a protein lateral diffusion coefficient that was dependent on the bR concentration and consistent with the Saffman-Delbrück model. The photoelectrical properties of bR-MSLBs were evaluated from the photocurrent signal generated by bR under continuous and transient light illumination. The optimal conditions for a self-sustaining photoelectrical switch were determined in terms of protein concentration, pH, and light switch frequency of activation. Overall, a significant increase in the transient current was observed for lipid bilayers containing approximately 0.3 mol % bR with a measured photo-current of 250 nA/cm2. These results demonstrate that the platforms provide an appropriate lipid environment to support the proton pump, enabling its efficient operation. The bR-reconstituted MSLB model serves both as a platform to study the protein in a highly addressable biomimetic environment and as a demonstration of reconstitution of seven-helix receptors into MSLBs, opening the prospect of reconstitution of related membrane proteins including G-protein-coupled receptors on these versatile biomimetic substrates.

A Nanoplasmonic Assay of Oligonucleotide-Cargo Delivery from Cationic Lipoplexes

A powerful new biophysical model is reported to assay nanocarrier lipid membrane permeability. The approach employs a nanophotonic biophysical membrane model as an assay to study oligonucleotide escape from delivery vector following fusion with endosomal membrane that relies on plasmonic hotspots within the receptor well, below the membrane to follow cargo arrival. Through the combined use of surface enhanced Raman spectroscopy and fluorescence lifetime correlation spectroscopy (FLCS), the model enables identification of a lipoplex-mediated endosomal-escape mechanism facilitated by DOTAP-oligonucleotide interaction that dictates the rate of oligonucleotide release. This work reveals a hitherto unreported release mechanism as a complex multistep interplay between the oligonucleotide cargo and the target membrane, rather than a process based solely on lipid mixing at the fusing site as previously proposed. This substantiates the observations that lipid mixing is not necessarily followed by cargo release. The approach presents a new paradigm for assessment of vector delivery at model membranes that promises to have wide application within the drug delivery design application space. Overall, this plasmonic membrane model offers a potential solution to address persistent challenges in engineering the release mechanism of large therapeutic molecules from their nanocarrier, which is a major bottleneck in intracellular delivery.

Annexin V Drives Stabilization of Damaged Asymmetric Phospholipid Bilayers

Annexins are soluble membrane-binding proteins that associate in a calcium dependent manner with anionic phospholipids. They play roles in membrane organization, signaling and vesicle transport and in several disease states including thrombosis and inflammation. Annexin V is believed to be involved in membrane repair. Mediated through binding to phosphatidylserine exposed at damaged plasma membrane, the protein forms crystalline networks that seal or stabilize small membrane tears. Herein, we model this biochemical mechanism to simulate membrane healing at microcavity array supported, transversally asymmetric, lipid bilayers (MSLBs) comprising 1,2-dioleoylsn-glycero-3-phosphocholine (DOPC) and 1,2-dioleoyl-sn-glycero-3-phospho-l-serine (DOPS). Varying annexin V concentration, lipid composition, and DOPS presence at each leaflet, fluorescence imaging and correlation spectroscopy confirmed that when DOPS was present at the external, annexin V, contacting leaflet, the protein assembled rapidly at the membrane interface to form a layer. From electrochemical impedance studies, the annexin layer decreased membrane capacitance while reducing resistance. With DOPS incorporated only at the lower (proximal) leaflet, no appreciable annexin assembly was observed over the first 21 h. This suggests that membrane asymmetry is preserved over this window and transversal diffusion of DOPS is slow. Intense laser light applied to the membrane, in which DOPS is initially isolated at the lower leaflet, was found to simulate membrane damage, stimulating the rapid assembly of annexin V at the membrane interface confirmed by fluorescence imaging, correlation spectroscopy, and electrochemical impedance measurements. The damage induced by light increased impedance and decreased membrane resistance. The resulting bilayer annexin V patched bilayer showed better temporal stability toward impedance changes when compared with that of the parent membrane. In summary, this simple model of annexin V assembly in a fluidic lipid membrane provides new insights into the assembly of annexins as well as an empirical basis for building patch-repair mechanisms into interfacial bilayer membrane assemblies.

Microcavity array supported lipid bilayer models of ganglioside – influenza hemagglutinin1 binding

The binding of influenza receptor (HA₁) to membranes containing different glycosphingolipid receptors was investigated at Microcavity Supported Lipid Bilayers (MSLBs).

Microcavity-Supported Lipid Bilayers; Evaluation of Drug-Lipid Membrane Interactions by Electrochemical Impedance and Fluorescence Correlation Spectroscopy

Many drugs have intracellular or membrane-associated targets, thus understanding their interaction with the cell membrane is of value in drug development. Cell-free tools used to predict membrane interactions should replicate the molecular organization of the membrane. Microcavity array-supported lipid bilayer (MSLB) platforms are versatile biophysical models of the cell membrane that combine liposome-like membrane fluidity with stability and addressability. We used an MSLB herein to interrogate drug-membrane interactions across seven drugs from different classes, including nonsteroidal anti-inflammatories: ibuprofen (Ibu) and diclofenac (Dic); antibiotics: rifampicin (Rif), levofloxacin (Levo), and pefloxacin (Pef); and bisphosphonates: alendronate (Ale) and clodronate (Clo). Fluorescence lifetime correlation spectroscopy (FLCS) and electrochemical impedance spectroscopy (EIS) were used to evaluate the impact of drug on 1,2-dioleyl- sn-glycerophosphocholine and binary bilayers over physiologically relevant drug concentrations. Although FLCS data revealed Ibu, Levo, Pef, Ale, and Clo had no impact on lipid lateral mobility, EIS, which is more sensitive to membrane structural change, indicated modest but significant decreases to membrane resistivity consistent with adsorption but weak penetration of drugs at the membrane. Ale and Clo, evaluated at pH 5.25, did not impact the impedance of the membrane except at concentrations exceeding 4 mM. Conversely, Dic and Rif dramatically altered bilayer fluidity, suggesting their translocation through the bilayer, and EIS data showed that resistivity of the membrane decreased substantially with increasing drug concentration. Capacitance changes to the bilayer in most cases were insignificant. Using a Langmuir-Freundlich model to fit the EIS data, we propose R_sat as an empirical value that reflects permeation. Overall, the data indicate that Ibu, Levo, and Pef adsorb at the interface of the lipid membrane but Dic and Rif interact strongly, permeating the membrane core modifying the water/ion permeability of the bilayer structure. These observations are discussed in the context of previously reported data on drug permeability and log P.

Mega-stokes pyrene ceramide conjugates for STED imaging of lipid droplets in live cells

Lipid droplets are dynamic subcellular organelles that participate in a range of physiological processes including metabolism, regulation and lipid storage. Their role in disease, such as cancer, where they are involved in metabolism and in chemoresistance, has emerged over recent years. Thus, the value of lipid droplets as diagnostic markers is increasingly apparent where number and size of droplets can be a useful prognostic. Although diverse in size, LDs are typically too small to be easily enumerated by conventional microscopy. The advent of super-resolution microscopy methods offers the prospect of detailed insights but there are currently no commercial STED probes suited to this task and STED, where this method has been used to study LDs it has relied on fixed samples. Here, we report a pyrene-based ceramide conjugate PyLa-C17Cer, that stains lipid droplets with exceptionally high precision in living cells and shows excellent performance in stimulated emission depletion microscopy. The parent compound PyLa comprises a pyrene carboxyl core appended with 3,4-dimethylaminophenyl. The resulting luminophore exhibits high fluorescent quantum yield, mega-Stokes shift and low cytotoxicity. From DFT calculations the Stokes shifted fluorescent state arises from a dimethylaminophenyl to pyrene charge-transfer transition. While the parent compound is cell permeable, it is relatively promiscuous, emitting from both protein and membranous structures within the living mammalian cell. However, on conjugation of C17 ceramide to the free carboxylic acid, the resulting PyLa-C17Cer, remains passively permeable to the cell membrane but targets lipid droplets within the cell through a temperature dependent mechanism, with high selectivity. Targeting was confirmed through colocalisation with the commercial lipid probe Nile Red. PyLa-C17Cer offers outstanding contrast of LDs both in fluorescence intensity and lifetime imaging due to its large Stokes shift and very weak emission from aqueous media. Moreover, because the compound is exceptionally photochemically stable with no detectable triplet emission under low temperature conditions, it can be used as an effective probe for fluorescence correlation spectroscopy (FCS). These versatile fluorophores are powerful multimodal probes for combined STED/FCS/lifetime studies of lipid droplets and domains in live cells.

Transparent Nanopore Cavity Arrays Enable Highly Parallelized Optical Studies of Single Membrane Proteins on Chip

Membrane proteins involved in transport processes are key targets for pharmaceutical research and industry. Despite continuous improvements and new developments in the field of electrical readouts for the analysis of transport kinetics, a well-suited methodology for high-throughput characterization of single transporters with nonionic substrates and slow turnover rates is still lacking. Here, we report on a novel architecture of silicon chips with embedded nanopore microcavities, based on a silicon-on-insulator technology for high-throughput optical readouts. Arrays containing more than 14 000 inverted-pyramidal cavities of 50 femtoliter volumes and 80 nm circular pore openings were constructed via high-resolution electron-beam lithography in combination with reactive ion etching and anisotropic wet etching. These cavities feature both, an optically transparent bottom and top cap. Atomic force microscopy analysis reveals an overall extremely smooth chip surface, particularly in the vicinity of the nanopores, which exhibits well-defined edges. Our unprecedented transparent chip design provides parallel and independent fluorescent readout of both cavities and buffer reservoir for unbiased single-transporter recordings. Spreading of large unilamellar vesicles with efficiencies up to 96% created nanopore-supported lipid bilayers, which are stable for more than 1 day. A high lipid mobility in the supported membrane was determined by fluorescent recovery after photobleaching. Flux kinetics of α-hemolysin were characterized at single-pore resolution with a rate constant of 0.96 ± 0.06 × 10^-3 s^-1. Here, we deliver an ideal chip platform for pharmaceutical research, which features high parallelism and throughput, synergistically combined with single-transporter resolution.

Electrochemically Triggered Release of Reagent to the Proximal Leaflet of a Microcavity Supported Lipid Bilayer

A novel and versatile approach to electrichemically triggering the release of a reagent, β-cyclodextrin (β-CD), selectively to the proximal leaflet of a supported lipid bilayer is described. Selective delivery is achieved by creating a spanning lipid bilayer across a microcavity array and exploiting the irreversible redox disassembly of the host-guest complex formed between thiolated ferrocene (Fc) and β-cyclodextrin (β-CD) in the presence of chloride. Self-assembled monolayers of the ferrocene-alkanethiols were formed regioselectively on the interior surface of highly ordered 2.8 μm cavities while the exterior top surface of the array was blocked with a monolayer of mercaptoethanol. The Fc monolayers were complexed with β-CD or β-CD-conjugated to streptavidin (β-CD-SA). Phospholipid bilayers were then assembled across the array via combined Langmuir-Blodgett/vesicle fusion leading to a spanning bilayer suspended across the aqueous filled microcavities. Upon application of a positive potential, ferrocene is oxidized to ferrocinium cation, disrupting the inclusion complex and leading to the release of the β-CD into the microcavity solution where it diffuses to the lower leaflet of the suspended bilayer. Disassembly of the supramolecular complex within the cavities and binding of the β-CD-SA to a biotinylated bilayer was followed by voltammetry and impedance spectroscopy where it caused a large increase in membrane resistance. For unmodified β-CD, the extraction of cholesterol from a cholesterol containing bilayer was evident in a decrease in the bilayer resistance. For the first time, this direct approach to targeted delivery of a reagent to the proximal layer of a lipid bilayer offers the potential to build models of bidirectional signaling (inside-out vs outside-in) in cell membrane model systems.

Dynamic studies of the interaction of a pH responsive, amphiphilic polymer with a DOPC lipid membrane

Deeper understanding of the molecular interactions between polymeric materials and the lipid membrane is important across a range of applications from permeation for drug delivery to encapsulation for immuno-evasion. Using highly fluidic microcavity supported lipid bilayers, we studied the interactions between amphiphilic polymer PP50 and a DOPC lipid bilayer. As the PP50 polymer is pH responsive the studies were carried out at pH 6.5, 7.05 and 7.5, corresponding to fully, partly protonated (pH = pK_a = 7.05) and fully ionized states of the polymer, respectively. Fluorescence correlation spectroscopy (FCS) using both labelled lipid and polymer revealed the PP50 associates with the bilayer interface across all pHs where its diffusion along the interface is impeded. Both FCS and electrochemical impedance spectroscopy (EIS) data indicate that the PP50 does not penetrate fully into the bilayer core but rather forms a layer at the bilayer aqueous interface reflected in increased resistance and decreased capacitance of the bilayer on PP50 binding. The extent of these effects and the dynamics of binding are influenced by pH, increasing with decreasing pH. These experimental trends concurred with coarse grained Monte Carlo simulations of polymer-bilayer interactions wherein a model hydrophilic polymer backbone grafted with side chains of varying hydrophobicity, to mimic the effect of varying pH, was simulated based on the bond fluctuation model with explicit solvent. Simulation results showed that with increasing hydrophobicity, the polymer penetrated deeper into the contacting bilayer leaflet of the membrane suppressing, consistent with EIS data, solvent permeation and that a full insertion of the polymer into the bilayer core is not necessary for suppression of permeability.