CO2 capture using membrane contactors: a systematic literature review

With fossil fuel being the major source of energy, CO2 emission levels need to be reduced to a minimal amount namely from anthropogenic sources. Energy consumption is expected to rise by 48% in the next 30 years, and global warming is becoming an alarming issue which needs to be addressed on a thorough technical basis. Nonetheless, exploring CO2 capture using membrane contactor technology has shown great potential to be applied and utilised by industry to deal with post- and pre-combustion of CO2. A systematic review of the literature has been conducted to analyse and assess CO2 removal using membrane contactors for capturing techniques in industrial processes. The review began with a total of 2650 papers, which were obtained from three major databases, and then were excluded down to a final number of 525 papers following a defined set of criteria. The results showed that the use of hollow fibre membranes have demonstrated popularity, as well as the use of amine solvents for CO2 removal. This current systematic review in CO2 removal and capture is an important milestone in the synthesis of up to date research with the potential to serve as a benchmark databank for further research in similar areas of work. This study provides the first systematic enquiry in the evidence to research further sustainable methods to capture and separate CO2.

Amphiphilic Graft Copolymer Nanospheres: From Colloidal Self-Assembly to CO2 Capture Membranes

Colloidal nanosphere self-assembly effectively generates ordered nanostructures, prompting tremendous interest in many applications such as photonic crystals and templates for inverse opal fabrication. Here we report the self-assembly of low-cost, graft copolymer nanospheres for CO2 capture membranes. Specifically, poly(dimethylsiloxane)-graft-poly(4-vinylpyridine) (PDMS-g-P4VP) is synthesized via one-pot, free radical dispersion polymerization to give discrete monodisperse nanospheres. These nanospheres comprise a surface-anchored highly permeable PDMS layer and internal CO2-philic P4VP spherical core. Their diameter is controllable below the submicrometer range by varying grafting ratios. The colloidal dispersion forms a long-range, close-packed hexagonal array on a substrate by inclined deposition and convective assembly. The array shows dispersion medium-dependent packing characteristics. A thermodynamic correlation is determined using different solvents to obtain stable PDMS-g-P4VP dispersions and interpreted in terms of Flory-Huggins interaction parameter. As a proof-of-concept, the implementation of these nanospheres into membranes simultaneously enhances the CO2 permeability and CO2/N2 selectivity of PDMS-based transport matrixes. Upon physical aging of the solution, the CO2/N2 selectivity is improved up to 26, one of the highest values for highly permeable PDMS-based polymeric membranes.

Preparation of porous aromatic framework/ionic liquid hybrid composite coated solid-phase microextraction fibers and their application in the determination of organochlorine pesticides combined with GC-ECD detection

Novel porous aromatic framework/ionic liquid hybrid composite coated SPME fibers were prepared for the preconcentration of OCPs coupled with GC-ECD.

High-performance Polymer Membranes with Multi-functional Amphiphilic Micelles for CO2 Capture

Herein, we report a high performance polymer membrane with simultaneously large improvements in the CO2 permeability and CO2/N2 selectivity. These improvements are obtained by incorporation of a multi-functional amphiphilic comb copolymer micelle, that is, poly(dimethylsiloxane)-g-poly(oxyethylene methacrylate) (PDMS-g-POEM), into a poly(amide-b-ethylene oxide) (Pebax) matrix. Both CO2 and N2 permeabilities continuously increased with PDMS-g-POEM content, whereas the CO2/N2 selectivity increased up to 40 wt % of PDMS-g-POEM, which enabled the maximum performance to approach the upper bound limit (2008). The membranes with PDMS-g-POEM exhibited greater CO2 permeability and CO2/N2 selectivity than those with a zeolitic imidazolate framework (ZIF-8), a well-known expensive inorganic filler, indicating the effectiveness of PDMS-g-POEM micelles for CO2 capture.

Well-organized meso-macroporous TiO2/SiO2 film derived from amphiphilic rubbery comb copolymer

We report the facile synthesis of a well-organized meso-macroporous TiO2/SiO2 thin film with high porosity and good interconnectivity from a binary mixture (i.e., titania precursor and polymer template). Our process is based on self-assembly of the amphiphilic rubbery comb copolymer, poly(dimethylsiloxane)-g-poly(oxyethylene methacrylate) (PDMS-g-POEM) with titanium tetraisopropoxide (TTIP). SiO2 is self-provided by thermal oxidation of PDMS chains during calcination under air. The selective, preferential interaction between TTIP and the hydrophilic POEM chains was responsible for the formation of well-organized TiO2/SiO2 films, as supported by transmission electron microscopy, scanning electron microscopy, X-ray photospectroscopy, and X-ray diffraction analyses. We investigated in detail the effect of precursor content, solvent type, and polymer concentration on thin film morphology. Photodegradation of methyl orange by the well-organized meso-macroporous TiO2/SiO2 film was greater than that of a dense TiO2 film prepared without PDMS-g-POEM as well as a SiO2-etched TiO2 film. These results indicate that the well-organized structure and SiO2 doping of the TiO2 film play a pivotal role in enhancing its photocatalytic properties.

Highly permeable ionic liquid membrane by both facilitated transport and the increase of diffusivity through porous materials

BMIM BF₄/Cu nanoparticles/KIT-6 composite membrane for facilitating CO₂ transport.